Used Wide Planer for sale (9,116)

Condition: good (used), functionality: fully functional, planing width: 400 mm, planer shaft diameter: 100 mm, total length of planing tables: 1,950 mm, total length: 1,950 mm, chip removal for surfacing (max.): 10 mm, total width: 900 mm, chip removal: 8 mm, planing height: 200 mm, number of planer blades: 3, extraction nozzle diameter: 140 mm, type of input current: three-phase, height adjustment type: mechanical, table width: 460 mm, table height: 860 mm, rotational speed (max.): 4,000 rpm, SCM L'invincibile 2000d Planer and Thicknesser -Motor power: 3 kW / 400 V -Two feed speeds: 5 and 8 m/min -Extraction connection top and bottom Ø140 mm (custom-build) -Year of manufacture: approx. 1975 -Estimated weight: 600 kg -Includes 8 sets of HSS knives, 6 sharpened, plus 1 set of carbide knives The planer remains in use until sold and can be inspected on site. Hjdpfsx T A I Djx Ag Ujfb Machine must be collected. Available by arrangement, approx. February 2026.

Condition: like new (used), Year of construction: 2004, Four-side planer Martin T 90 Fully refurbished machine Year: 2004 Specifications: Working width: 260 x 160mm Spindle speeds: 6000 RPM Tersa cutterblock spindle 56 Amps 6 Bar Hfjdpfx Agox Tgu Ij Ueb

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 5202023, VIET 3 belt sander running very well. new bearing fitted in all motors and rollers 12 months ago so machine has full recon and can be seen running very smooth with no rattles or vibration when sanding 1.5mm from oak with 40 grit belt and can give excellent finish with 180 grit with 3rd belt. also have over 200 sanding belts mixture of 40 grit 80, 120, 150, 180 Grit with value of 7000 euro will give with sander for 3000 euro Hodpfx Agextf Hto Ujfb

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Hjdsvkit Aepfx Ag Uefb Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: excellent (used), Year of construction: 2001, Veneer Saw Mayer FH2-3520, Precision Cutting Saw with Jointing Unit (Planing Unit) and Veneer Stop Table Robust machine construction by Mayer A video of the machine in operation can be provided upon request. For tear-free and gap-tight cutting of veneer, including thick-cut veneer Max. cutting length: 3,500 mm Saw unit and jointing unit are combined in one assembly, so only one unit needs to be moved. Easy-to-operate saw unit running on linear guides. Rear support table with through-finger stop, adjustable from approx. 2 – 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor: 1.8 kW, milling unit: 1.2 kW Motors can conveniently be switched on at the handle, so they only run when needed. Fine-cut blade equipped with carbide teeth, sharpened Planer head Z4, fitted with new carbide indexable inserts, including spare blades Practical front veneer storage, extendable for the planing unit 100 mm extraction connection with extraction duct CE certification Operating manual On-board tools Original paintwork, only a few areas touched up Hsdpex Hqtzsfx Ag Uefb Dimensions approx. 5,050 x 1,700 x 1,400 mm (L x W x H). Weight approx. 900 kg. The machine can be demonstrated at our location by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'other offers from this supplier.'

Condition: used, maximum load weight: 33,400 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2006, next inspection (TÜV): 06/2026, loading space length: 13,300 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2006, Refrigeration unit brand: Thermo King Additional information: * Unladen weight: 8,600 kg Hfodpfx Agsx Iy Sve Ueb * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 30% * Tire tread depth inner right | First axle: 30% * Maximum axle load | First axle: 9,000 kg * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 30% * Tire tread depth inner left | Third axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire tread depth inner right | Third axle: 30% * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Lift axle | Third axle: Yes * Position | First axle: Rear * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brake type | Third axle: Disc brakes Other features: * Rear doors * Homepage * Tail lift * Lift axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about costs and procedures for your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. The prices listed are exclusive of BPM and apply only for export.

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA Hsdpsx Ttbzefx Ag Ujfb - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2001, with air cushion table, chamfering unit Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 pcs 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm Motor power: 11.0 kW 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm Shared motor with right spindle With ATS/M system (automatic positioning control) 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW With ATS/M system (automatic positioning control) 5th spindle: top, beveling unit 6th spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW Hjdpfx Agjxr A Npj Ujfb Motor brakes: mechanical Electric hood locking: Yes Height adjustment of top spindle: electric, with feed Feed brake system: Yes Feed speed stepless up to: 3 - 26 m/min Feed roller pressure: pneumatic Feed drive power: 4.0 kW Feed drive: Cardan shaft Lubricating pump: automatic Max. cutting depth (joining): 10 mm Jointing cutter on planer: Yes Powered rollers in table: 1 pc Control type: PLC (programmable logic controller) Spindle position indicator: digital display Infeed rollers before planer: Yes Air cushion table: double track Central lubrication point: Yes Description: Joiner table with jointing fence 1.0 m, pneumatic pressure Infeed roller before planer Powered rollers in table Total connected load: 52 kW Location: Nattheim

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 0-256-23-1012, Read operating hours: 361.69 h Working width: 1350 mm Wide belt width: 1350-1380 mm Wide belt width (H/X): 1370 mm Cross belt width: 150 mm Belt change side: left Working height: 900 mm Workpiece thickness: 3-160 mm Feed speed: 2.5 – 13 m/min Workpiece detection: High precision workpiece detection in 12.5 mm grid; multiple feeding of complex part shapes Units: 1. Cross Unit (1350 mm) (T3/5), stepless, frequency-controlled cutting speed 2-16 m/s, MPS 2.0 Plus (1350 mm) electro-magnetic segmented pressure beam Drive motor 13.5 kW 2. X Unit (1350 mm) (T3/5) with internal lamella belt and steel contact roller to hold a segmented pressure beam with three selectable modes: - Calibration sanding with profiled contact roller - Veneer and lacquer sanding without lamella belt - Veneer and lacquer sanding with lamella belt Stepless, frequency-controlled cutting speed 2-18 m/s, MPS 2.0 Plus (1350 mm) electro-magnetic segmented pressure beam Drive motor 18.5 kW 3. U Unit (1350 mm) (T3/S/7/9): Universal unit for mounting round brushes on exchange frames and disc brush cassettes. Terminal-controlled adjustment of brush infeed and thus depth of immersion Stepless, frequency-controlled brush oscillation 36-240 strokes/min, switchable Rotational direction: with or against feed Drive motor 15 kW Hsdpjv T Nnfsfx Ag Uefb Cutting speed: 130 – 1000 2 carts for easy changing of brush units on exchange frames (service carts for U unit) 1 structuring brush, diameter 300 mm 1 satin finishing brush, diameter 300 mm 4. Brush unit with structuring brush Drive motor 5.5 kW Brush trim: Anderlon K 80 Diameter: 150 mm Integrated cleaning system: ionization device with 16 rotating nozzles, with extraction stub Abrasive belt dimension: 1370 x 2150 mm Vacuum clamping device: 5.5 kW, vacuum blower integrated in machine Machine control: terminal touch screen Additionally: 2 x roller conveyors, each L=3000 mm, W=1300 mm Various abrasive belts P24-P100 (approx. 50 pieces); extraction piping; mobile abrasive belt holder (6 arms) Operating voltage: 400 V, 50 Hz Required space L x W x H: 2566 mm x 2100 mm x 2415 mm Weight: 5500 kg Machine dimensions: 2600 x 2030 x 2000 mm Location: Stock 32683 Barntrup

Condition: excellent (used), Year of construction: 2011, Four Side Planer SCM Compact NTE - after the technical review - Italian production - year of production 2011 TECHNICAL PARAMETERS: Hjdpfegyflcjx Ag Usfb planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 lower spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 lower spindle 5.5 kW six top pull rollers pneumatic pressure adjustable feed on the inverter feed speed range 5-25 m / min adjustable heads table top length 2480 mm electric brakes nozzles diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (length / width / height) 340/160/170 cm weight 2480 kg

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, total length: 6,000 mm, total width: 5,200 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Hfjdsx T Aqrepfx Ag Ujb Option: External blowing air Kinematics: Fork head

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding of soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester lacquers Sanding of blocking foils with graphical control terminal NC-controlled thickness adjustment from 3-150 mm Calibration roller can be switched on via terminal with patented CSD segmented pressure beam to compensate for workpiece tolerances up to 2 mm Sanding width: 1350 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency controlled: approx. 2-18 m/sec Motor power (sanding unit): 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Hfsdpfxox Rpghe Ag Usb with belt cleaning air blast: 490 l/min Extraction port: 180 mm Air requirement sanding unit: 1800 m³/h Required air speed: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (WxDxH): 2090x1670x2020 mm Availability: short notice Location: Röllbach

Condition: excellent (used), CATALOG NUMBER 7616 TECHNICAL DATA Hodpfx Aowbdn Ujg Ujfb - Shaft width: 510 mm - 4-knife shaft - Table length: 2640 mm - Shaft guard - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable for angle - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2640x1000x980 mm - Weight: 970 kg ADVANTAGES – German manufacture – Not repainted – Long tables – Used jointer – Very good condition Net price: 9900 PLN Net price: 2350 EUR at an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, Wide span shelving / Basic shelving / 2550x2500x600 WxHxD Hfodpfx Ajcfbzcog Ueb Wide span shelving, new Dimensions: L 2550 x H 2500 x D 600 mm incl. 4 shelves Shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving consisting of: 2x shelf uprights, 600x2500mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, incl. locking pins 4x shelves 2430x545mm, Thickness: 22 mm

Condition: good (used), Year of construction: 2007, SCM Compact XL four-side planer - Italian production - year of production 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW 4) horizontal, top 230 mm 7.5 kW all spindles up / down, right / left spindle diameter 40 mm from the top 3 introducing rollers, metal, torsion, including 2 double top pulling roller, double rubber pressure 1 pc on the side a rubber pulling roller in the lower table top feed on cardan shafts Hodpfx Agohrdmij Uefb pneumatic clamps smooth regulation of the feed speed 5-22 m / min 1.1 kW feed motor electric setting of the planing thickness 0.37 kW lifting motor the length of the introducing table top 2470 mm locked in the cabin central lubrication of the table top diameter of the extraction nozzle 150 and 180 mm dimensions (length / width / height) 3650/1200/1600 mm weight approx. 1500 kg

Condition: excellent (used), Catalogue number 7797 Hodpfext Ii Rjx Ag Ujfb TECHNICAL DATA - Shaft width: 510 mm - Number of knives: 3 pcs - Table length: 2520 mm - Brake - Cast iron tables - Both tables adjustable - Original angle-adjustable fence - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2520x870x950 mm - Weight: 672 kg ADVANTAGES – Polish production – 3-knife cutterhead – Brake – Used jointer, in very good condition Net price: 7,500 PLN Net price: 1,790 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 1990, Four-side planer REX HOMS-310 AD - German production - year of production 1990 - for wet wood Hodpehikplsfx Ag Uofb TECHNICAL PARAMETERS: - planing width max. 310 mm - planing height on both sides 300 mm - planing height on four sides 100 mm - 35 mm spindle diameter - 2 x 11 kW shaft motors power - spindle motor power 2 x 7.5 kW - feed speed adjustable on the variator - feed speed 6-36 m / min - four upper pulling shafts - two lower pulling shafts - four auxiliary rollers in the table top - brake - minimum length of the element 600 mm Machine dimensions: - length 290 cm - width 170 cm - height 210 cm - weight ~ 3500 kg

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): Hodpfx Agow Ipcvo Uofb - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: like new (used), Four-side planer REX HOMS-410 – German-made – Suitable for wet wood TECHNICAL SPECIFICATIONS: Max. planing width: 410 mm Planing height (two-sided): 200 mm Planing height (four-sided): 200 mm Spindle diameter: 40 mm Cutterhead motor power: 2 x 11 kW Spindle motor power: 2 x 5.5 kW Feed speed: steplessly adjustable Feed speed adjustable via frequency inverter Three upper feed rollers Three lower feed rollers Two auxiliary rollers on the worktable Brake Minimum workpiece length: 450 mm Machine dimensions (L/W/H): 250 / 220 / 180 cm Weight: ~3500 kg Hfjdpforwl Dbjx Ag Ueb

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES Hfodpfxex Tplce Ag Ueb – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: Hodpeibq Niefx Ag Uofb planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs - Discharge feed roller, smooth - 2 outfeed pressure rollers - Smooth feed roller – Bottom section: Hedpfx Agjx Tphde Usfb - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table elevation – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7773 TECHNICAL DATA - Max width of workpiece: 900mm - Max height of workpiece: 160mm – Top: - Metal pressure roller, slip type I unit – Calibrating rubber grooved roller II unit – 2x Metal calibrating roller + shoe Hfsdjxnynuepfx Ag Ueb – Bottom: - Feed belt - Pneumatic oscillating belt - Electric table lifting - Main motor 15kW/11kW - Feed motor 1.5kW - Operating pressure 6-8 bar - Dust extraction port diameter 2x200mm - Dimensions (L/W/H): 1850x1950x2040mm - Weight approx. 3000kg ADVANTAGES – Italian manufacture – Calibrating sander + pad – Used sander, very good condition Net price: 15,900 PLN Net price: 3,780 EUR (at 4.2 EUR exchange rate) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7573 Technical data: - Shaft width: 640 mm - Number of knives: 4 pcs - Max thickness of machined element: 270 mm Hodpfxov H A Tzs Ag Uofb - Top section: - Safety pawls - Toothed infeed shaft, driven - Hold-downs - Planing shaft - Hold-downs - Outfeed smooth shaft, driven - Bottom section: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5 kW - Electric table lifting – lifting motor: 0.75 kW - 2 feed speeds – feed motor: 1.1 kW - Suction outlet diameter: 160 mm - Dimensions (L/W/H): 1150x1240x1170 mm - Weight: 1073 kg ADVANTAGES: – Polish manufacture – Electric table height adjustment – Operating documentation (DTR) – Used thickness planer, in very good condition Net price: 26,900 PLN Net price: 6,400 EUR (depending on 4.2 EUR rate) (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalogue number: 7775 TECHNICAL DATA - Cutterblock width: 640 mm - Number of knives: 4 pcs - Maximum working thickness: 300 mm – From above: - Anti-kickback fingers - Toothed, pulling, swiveling infeed roller - Pressure bar - Planing cutterblock - Pressure bar - 2 smooth, pulling, rubber-coated outfeed rollers - Digital thickness display - Main motor: 5.5 kW - Electric table lift: 0.7 kW - Variable feed speed: 6–20 m/min - Feed motor: 1.1 kW - Dust extraction port diameter: 150 mm - Dimensions (L/W/H): 1000 x 1400 x 1200 mm - Weight: 950 kg ADVANTAGES – Italian manufacture – Electric thickness display – Electric table lifting – Used thickness planer in very good condition, complete with original technical documentation (DTR), CE marking Net price: 31,900 PLN Net price: 7,590 EUR based on 4.2 PLN/EUR (Prices may vary with exchange rates) Hfjdsxl Umgopfx Ag Ueb