Crushing and/or screening plant

Sonstige/Other Gasparin Prallbrecher GI1111C K2

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Tracked Dumper with Front Loader – GP500 PRO DUMPER The GP500 PRO DUMPER is a compact and powerful tracked dumper wheelbarrow with a front loader, powered by a 5.5 HP petrol engine. With a payload capacity of 500 kg, this machine is ideally suited for demanding construction, electrical, plumbing, refurbishment work, and similar applications. It can operate safely on slopes of up to 20 degrees. The robust steel skip, with a volume of 0.196 m³, is hydraulically tipable and suitable for a variety of tasks. The GP500 PRO features an oil cooling system and a foldable operator platform. Manufactured under European technical supervision and based on a durable design, it is fit for use in a wide range of conditions. Comprehensive post-warranty service is also available. TECHNICAL DATA: Operating weight: 470 kg Payload: 500 kg Skip volume: 0.196 m³ Skip dimensions: 1060 × 645 × 480 mm Tipping: hydraulic Start system: electric Drive: hydraulic Maximum travel speed: 3 km/h WORKING RANGE AND DIMENSIONS: Lajdpfx Ajyk Sl Sjkljg Maximum working height: 1310 mm Maximum pin height: 870 mm Maximum discharge height: 270 mm Load reach at maximum discharge height: 350 mm Wheelbase: 810 mm Ground clearance: 53 mm Bucket tipping angle: 55° Bucket width: 780 mm Overall length: 1620 mm Overall width: 850 mm Chassis width: 960 mm Overall height: 1320 mm Turning radius: 1195 mm ENGINE: Engine brand: Rato Maximum output: 4.1 kW / 5.5 HP Maximum speed: 3600 rpm Cooling: air-cooled Oil change volume: 0.5 litres Fuel type: petrol Additional information: Track size: 180 × 60 × 38 mm Fuel tank: 3 litres Hydraulic oil tank: 14 litres PRICE: €3,300 net €3,927 gross

Condition: new, STATIONARY CONCRETE BATCHING PLANT S160-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 160m³/hour freshly compressed concrete Mixer Capacity : 6000/4000 lt (4m³ Compressed Concrete) Lajdpfx Akeflz Inoljg Total Motor Power : 245kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 160 m³/h Air Compressor Capacity : 1400 lt/min Aggregate Hopper : 4×40 = 160m³ or 6×30 = 180m³ Mixer Type : TWIN Shaft (4m³). 6000/4000 lt capacity Aggregate Conveyor Band : 1200 mm * 35000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling Lsdpfx Aex Dmdhskleag 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: new, Year of construction: 2025, machine/vehicle number: 401064052, mobile concrete plant Frumecar EBA 1000 - Year: NEW - 4 aggregate hoppers of 25 m³ Lajdpehd I S Ajfx Aklog - Capacity: 50 m³/h - mixer size: 1.0 m³ / 1500 liters - K2 portable computer system - screw conveyor for cement - cement silo 55 tons - international assembly included - 2-year guarantee This offer is subject to change, and may contain input errors and mistakes. Only the specific agreements in the order confirmation or the sales contract are valid. more machines and mixing plants on our website Further information: Intended use: construction, usable material: concrete.

Condition: used, mileage: 623,000 km, first registration: 05/1971, fuel type: diesel, axle configuration: 2 axles, color: grey, gearing type: mechanical, Year of construction: 1971, Equipment: ABS, electronic stability program (ESP), SCANIA 110 SUPER WITH TURBOCHARGER THREE-WAY TIPPER TRUCK 2 UNITS AVAILABLE --- VEHICLE HISTORY: * ENGINE IS DRY AND DOES NOT LEAK OIL VEHICLE EQUIPMENT: * THREE-WAY TIPPER * MANUAL TRANSMISSION * ENGINE BRAKE * TURBOCHARGER * PTO (POWER TAKE-OFF) * PERMISSIBLE GROSS WEIGHT: 18,000 KG * CURB WEIGHT: * PAYLOAD: * IMMEDIATELY READY FOR USE --- * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) Ledpfxjryrk Rs Akljag --- EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAY, 15 DAY, 30 DAY PLATES AND 15 DAY AUSTRIAN PLATES AVAILABLE EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU & third countries, a deposit of at least €500 / €1,000 will be charged. Subject to alterations, errors and prior sale! More vehicles available on our website. Sales exclusively according to our General Terms & Conditions – see homepage. Important note: Despite careful verification of all details in our offer, errors may occur. Some may be caused by data transmission errors from various platform providers. Therefore, we point out all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB, but rather serves as information for the initiation of a contract. All information provided is without guarantee and does not constitute warranted characteristics.

Condition: new, Year of construction: 2025, machine/vehicle number: 982988248, Frumecar Modulmix 2000 concrete batching plant Year: New Capacity: 90 m³/h - 4-5 aggregate hoppers / in-line arrangement - Hopper capacity: 60 - 120 m³ - Mixer size: 2.0 m³ / 3000 liters - K2 fully automatic computer system - Electric control system: Siemens S7 - Cement screw diameter: 273 mm - Cement silo: 1-4 - International assembly included - 2 years guarantee from start-up - Winter housing possible This offer is subject to change, and may contain input errors and mistakes. Only the specific agreements in the order confirmation or sales contract are valid. More machines and mixing plants are available on our website. Further information: Intended use: Construction Usable material: Concrete General condition: very good Technical condition: very good Laodpfxohd I Tvs Aklsg Optical condition: very good

Condition: new, Year of construction: 2025, machine/vehicle number: 997307957, Gasparin Jaw Crusher GI118C OLIMPO mobile jaw crusher on crawler tracks The sheer performance that the OLIMPO delivers, thanks to the 1100x800 crusher, makes it the ideal machine for professionals in quarries and recycling operations. This uncompromising machine was developed with a focus on meeting the requirements for operation, productivity, effortless maintenance, and transport. Equipped with state-of-the-art control and operating systems, it is easy and user-friendly while also being environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing the highest profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest robustness against stress. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The OLIMPO crusher certainly offers convincing and unparalleled performance in applications involving natural stone, recycling, and rentals. Production output: approx. 330 tons/hour Patented HCS system Proportional distributor with "Load Sensing" for system optimization and a reduction in fuel consumption by approx. 30%. Optional pre-screen Crushing gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3200 mm Dust extraction Tank pump Magnetic separator Warranty: 1 year or up to max. operating hours from the start of operation of the plant Technical data: Jaw crusher 1100 x 800 mm Crushing gap from 50 to 200 mm Ljdehd Nabopfx Akljag Feed hopper 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Grizzly feeder 970 x 3600 mm Main conveyor belt 1000 x 11000 mm 4-cylinder diesel engine with constant speed 82 hp/60 kW, emission stage V Control panel Crawler tracks 450 x 3800 mm Weight: kg Transport length 13850 mm Transport width: 2550 mm Transport height 3390 mm Further information Intended use: Construction, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: good (used), Manufacturer: Sandvik / Aubema Type: 1712 / 10 Year of Manufacture: 1999 Mach. No.: 8519 Rotor Dia.: 1.200mm Rotor Width: 1.000mm Electrical Motor: Included Laodpeg Stt Refx Aklsg See PDF-file below for more detailed information.

Condition: ready for operation (used), functionality: fully functional, power: 200 kW (271.92 HP), operation weight: 37,000 kg, shovel volume: 2.6 m³, Year of construction: 2008, machine/vehicle number: CAT 0330DTGGE00850, The machine is in excellent condition and ready for use. Lodpfx Aksylmi Isloag

Condition: used, mileage: 58,943 km, power: 85 kW (115.57 HP), first registration: 04/1995, overall weight: 3,000 kg, fuel type: gasoline, color: green, axle configuration: 4x4, empty load weight: 2,849 kg, tire size: 205r16, wheelbase: 2,850 mm, gearing type: automatic, emission class: euro1, suspension: other, machine/vehicle number: 694, Equipment: all wheel drive, differential lock, truck registration, TUV and AU are newly made truck registration , The Puch is in a really good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The Puch is equipped with: ZAUGG snow blade electro-hydraulic drive, snow plow can be adjusted by the driver while driving, there is a counterweight in the rear for good traction, all-wheel drive and off-road reduction, rear differential lock, 2 seat paws, high off-road capability for extreme winter use. Tire size 205R16, Mercedes automatic transmission with 4 gears, total weight 3000 kg, engine capacity 2296cm? , 24Volt power supply, Lsdpfx Ajqx Sz Iekleag There are several vehicles in stock All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp