Used Weber Cr 3 for sale (107)

Condition: excellent (used), Weber Maschinenbau GmbH mobile outfeed belt Type: CCE Gsdpfsv T Aq Tjx Ahvobw Number: 2705 Year of construction: 08/2008 Belt width: (2x) 420 mm Total dimensions outfeed belt: 3160 mm x 1320 mm x 1480 mm.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Godpfx Ahjxu U Trsvebw Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), functionality: fully functional, overall weight: 700 kg, Year of construction: 2013, screw diameter: 45 mm, WEBER ZE 45 N Single-Screw Extruder Used for PP-PIPES and PE PIPES Gsdpfxjxwd Nus Ahvebw Year of manufacture: 2013 Operating hours: Little used Screw diameter: 45 mm Total output: approx. 30 kg/h Condition: Very good, barrel and screws as good as new Used for PP and PE pipes The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr. 6 Germany

Year of construction: 1993, condition: used, Cutting depth 220 mm weight of the machine ca. 375 kg Gbedpjw Syibofx Ahvow +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), functionality: fully functional, Offered is a Weber brand belt deskinner, Model: ASB 800, 400V, 16A, V2A. The machine is fully functional and ready for immediate use. Cutting width approx. 40 cm. The machine is in full working order and ready to operate immediately. Gbsdpjxt Rptjfx Ahvjw Further details available upon request. Payment by cash or advance bank transfer. Sale to businesses only, no warranty, no liability.

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Manhole cylinder NW 600; small sheet cut-outs in the insulation jacket Outer diameter: 3,200 mm Inner diameter: 3,000 mm Total length: 12,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 250 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 1.5 bar Support type: feet Location: Bremen Gedpjxqb Rvsfx Ahvobw Technical documentation: Drawing Nameplate: Vacuum: 0.2 bar Volume: 60,000 liters Double-jacket volume: 105.0 liters Cylinder wall thickness: 5 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 9,000 mm Previous application: rapeseed oil TANK Max. operating temperature tank / °C: 200 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom tempering: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in cylinder, in top head, in top head (DN 600) Outlet: flange DN80 Note: dents in the insulation jacket, manhole cover plated MATERIAL SPECIFICATION Heating/cooling system material: V2A 1.4301 (AISI 304) Foot material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 7 mm

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are Godpfx Aeku Aw Njhvsbw tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Model Sinumerik 840C Main Drive Gbjdpfsxqta Nex Ahvsw Spindle speed range 6000 Tool taper SK50 Movement X-Axis Movement 1200 mm Y-Axis Movement 800 mm Z-Axis Movement 800 mm Tools Max tool length 750 mm This Burkhardt-Weber MC 80 was manufactured in 1998. It features a spindle speed of 6,000 rpm, a maximum feed rate of 25 m/min, and a tool capacity of 80 with SK50 adapters. The CNC Siemens Sinumerik 840C control system enhances its precision. Consider the opportunity to buy this Burkhardt-Weber MC 80 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, functionality: fully functional, fuel type: gasoline, overall weight: 32 kg, DGUV certified until: 03/2026, Year of construction: 2018, machine/vehicle number: 20008074, Equipment: UVV, Specifically designed for compaction of pipe collars in trenches. Other areas of application: compacting edge zones of walkways; installation of drainage systems. Due to its low weight, it is easy, flexible, and safe to operate even on slopes and in very confined spaces. Gbjdpfx Aoxpu Tbohvow

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Gbodpfx Ajltrg Sohvow Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. Gedpfxjvgnr Ao Ahvjbw - Arm spreader. - Hydraulic pump.

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Notes: Support ring and vessel flange made of steel; handhole cover plated Inner diameter: 1,000 mm Total height: 2,000 mm Heating/Cooling: yes Max. permissible operating temperature: 300 °C Max. permissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top head: removable / hinged top head Agitator: anchor agitator Support type: ring Location: Bremen Gbedpfoxqba Dsx Ahvsw Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous application: Chemicals VESSEL Max. vessel operating temperature / °C: 300 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil FEATURES Manhole / dome: handhole Outlet: flange DN50 AGITATOR Agitator placement: centered in the top head Agitator configuration: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top wall thickness: 15.8 mm

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. Gbedpfxsqpft Io Ahvew - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Godpfow Up Rmex Ahvjbw Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new

Condition: used, Year of construction: 1986, machine/vehicle number: 8240, Bandanzahl : 1 max. Arbeitsbreite : 1100 mm max. Arbeitshöhe : 150 mm 1. Band : Kombiaggregat Ausführung 1. Walze : Stahlkontaktwalze Schleifschuh 1. Aggregat : starr, höhenverstellbar Schleifbandlänge 1. Aggregat : 2500 mm Schleifbandbreite 1. Aggregat : 1150 mm Antrieb Aggregat 1 : 15 kW Steuerung : Handbedienpult Elek./pneu. Bandoszilation : Ja Einlasshöhe : variabel (unterer Tisch verfährt) Tischhub : elektro-motorisch Godpfx Ahswaukdjvebw Tischanzeige : digital Betriebsdruck : 7 bar Arbeitshöhe bzw. Aufgabetischhöhe : 850 mm Beschreibung : neuer Teppich Gewicht ca. : 1700 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm Gedpjw Dbkrsfx Ahvsbw -Weight: 11.1 kg/piece

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Gbjdpfx Ajvgnttehvsw - Hydraulic pump.

Condition: used, tank capacity: 10,875 l, GENERAL INFORMATION Features: Crane lugs Design: Suspended Remarks: Support ring made of Fe; in some areas, the previous operator welded stainless steel plates to the inside of the top flanges (with some of these plates cut open again; see photos); manway diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support type: Ring Location: Bremen Jacket temperature control: Half-pipe coil Nameplate: Gsdpfsxqa Nwsx Ahvjbw Vacuum: 1.0 bar Volume: 10,875 liters Jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,200 mm Last application: Adhesives industry VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum for jacket / shell side / bar: 1.0 bar Bottom temperature control: Half-pipe coil FEATURES Manway / dome: on top head Discharge: available Discharge (alternative entry): 100 mm Note: light residues, manway cover missing MATERIAL SPECIFICATIONS Flange material: Steel AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 volts Agitator positioning: centrally in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Top wall thickness: 14 mm

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Weight of hydraulic unit: approx. 40 kg Weight of spreader device: approx. 25 kg Gjdpfx Ahjdzp S Rjvobw Very good condition Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Godpfx Aevryhyohvebw Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: excellent (used), From 2022 with complete documentation and with Zebra ZE500 printer. Good as new. Gjdpfx Aevt An Sohvsbw

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Gbjdpfjw U A Dmex Ahvew Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Gbedpfxevgnhwe Ahvew - Hydraulic pump.

Year of construction: 2005, condition: used, Applicable material: Food Gbsdpfx Ajvtzamehvsw Power: 7 kW (10 HP) Empty weight: 900 kg Dimensions (LxBxH): 84 x 474 x 208 cm

Year of construction: 2010, condition: used, Applicable material: Food Gsdpfxjvty S Ij Ahvjbw Power: 5 kW (7 HP) Empty weight: 470 kg Dimensions (LxBxH): 113 x 118 x 139 cm