Used Waterjet Sweden for sale (435)

Condition: ready for operation (used), functionality: fully functional, Nimo-KG SK 800 MK 2 elevator for big plastic crates or normal meat bins 200 liters or 300 liters. Year of construction 2014 Maximum measure big boxes Wide 125 cm Deep 107 cm Hight 80 cm. Tipping hight 193 cm. Bwsdpfx Adexl Tp Hsxsw

Condition: good (used), Year of construction: 2020, operating hours: 206 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 88 mm, Waterjet Cutting Machine Multicam V-204-W with High-Pressure Pump KMT Streamline SL-VI 50 STD and Abrasive Feeder KMT Abraline V Year of manufacture: 2020 Operating hours: Only 206h !!! (read directly from the high-pressure pump) Complete documentation available. The cutting tank is fitted with grating supports. It can also be equipped with the original plastic supports (approximate cost: €3,000). Bodpfoxg Nnnex Adxeww (Y) Axis ... 1524 mm (X) Axis ... 3048 mm (Z) Axis ... 88.9 mm Position accuracy: +/-0.001″ Repeatability: +/-0.002″ Rapid traverse (max): 1000 IPM Cutting speed (max): 800 IPM EQUIPPED WITH: - KMT Streamline SL-VI 50 STD, 50 Hp (37 kW) – 500 - 3,800 bar - Dual side stepper motors - Multicam hand-held graphic interface - KMT Abraline V – Highly accurate abrasive feeding/hopper system

Condition: like new (used), Year of construction: 2015, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 17284006, total width: 1,000 mm, total length: 2,800 mm, total height: 1,580 mm, overall weight: 125 kg, input voltage: 230 V, air demand: 12 m³/h, air pressure: 7 bar, power: 0.5 kW (0.68 HP), input frequency: 50 Hz, Equipment: documentation/manual, A semi-automatic tube filling machine MF10A manufactured by Medipac AB. The filling capacity is approximately 24 tubes/minute. When the magazine for filled tubes is full (approx. 10 tubes), the machine switches to standby mode, and when the filled tubes are removed from the magazine, the machine automatically resumes operation. This allows for easy operation by a single operator. The machine is equipped for ø25mm tablets and tubes with ø29mm outer diameter; other formats available upon request. Documentation (in English) is available. Bsdpoxqf Rmofx Adxjww

Condition: good (used), mileage: 42,000 km, power: 390 kW (530.25 HP), gearing type: automatic, fuel type: diesel, color: white, axle configuration: 8x4, first registration: 05/2017, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: ABS, air conditioning, cabin, cruise control, onboard computer, = Additional Options and Accessories = - Rear work lights - Front work lights - Leaf suspension - Windscreen - Air suspension - Fog lights - Automatic heating system - Central locking = Remarks = Daf XF 510 Ginaf 8x4*4 - Tipper - Euro 6 - Steering axle - Steel front suspension MY: 16-5-2017 KM: 420,000 XL9AGANPA00527344 Location: Sweden = Further Information = Availability Stock status: Expected soon General Information Cab: Sleeper cab Bwsdpfexfkpwex Adxsw Technical Information Number of cylinders: 6 Gross vehicle weight (GVW): 34,000 kg Drivetrain AdBlue system: Yes Transmission Transmission: AS Tronic, automatic Axle Configuration Front axle 1: Steered; Suspension: Leaf springs Front axle 2: Twin tyres; Suspension: Air suspension Rear axle 1: Twin tyres; Suspension: Air suspension Rear axle 2: Steered; Suspension: Air suspension Condition Technical condition: Good Visual condition: Good Further Information Please contact VAEX The Truck Traders for more information.

Condition: good (used), mileage: 1,041,300 km, power: 405 kW (550.65 HP), first registration: 08/2018, fuel type: diesel, color: white, axle configuration: 8x2, fuel: diesel, wheelbase: 5,100 mm, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, = Additional Options and Accessories = - PTO (Power Take-Off) = Remarks = 1x Volvo FH540, 8x2*4, Transmission: I-Shift, Euro 6, Chassis (former tanker), ADR, 2018, 8,000 kg front axle, microwave, coffee machine, refrigerator, 2nd and 4th axles are steered and liftable, ABS, mileage: 1,041,300 km, first registration: 24.08.2018, year of manufacture: 08/2018, suspension: front leaf / rear air, Webasto heater, wheelbase between 1st and 2nd axles: 3780 mm, overall width: 2,550 mm, overall length: 10,100 mm, tires: front 385/55/22.5 (70%), rear 315/70/22.5 (50%), air conditioning, stereo system, electric windows, electric exterior mirrors, comfort driver's seat, heated driver's seat, roof spoiler, aluminum fuel tank, trailer coupling, valid technical inspection (TÜV), first owner! Last service at 992,900 km (05.05.2025) … The truck is in good and fully functional condition! Price: € Stockholm, Sweden For further information and photos, please contact us by phone or e-mail. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * We speak German * .----- * Shipping costs for this truck to various destinations * -----. * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 Bwjdpfexnxypjx Adxsw * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices apply only when purchasing this truck. * -----. _____ _____ = Further Information = AdBlue system: Yes Cab: double Front axle 1: Max. axle load: 9,000 kg; steered; tire tread left: 60%; tire tread right: 60%; suspension: leaf spring Front axle 2: lift axle; max. axle load: 9,000 kg; steered; tire tread left: 60%; tire tread right: 60%; suspension: air suspension Rear axle 1: max. axle load: 10,500 kg; tire tread left: 80%; tire tread right: 80%; suspension: air suspension Rear axle 2: lift axle; max. axle load: 7,500 kg; steered; tire tread left: 60%; tire tread right: 60%; suspension: air suspension Engine displacement: 12,777 cc Technical condition: good Optical condition: good

Condition: excellent (used), Year of construction: 2020, operating hours: 3,533 h, lifting height: 4,620 mm, fuel type: diesel, mast type: triplex, power: 184 kW (250.17 HP), motor manufacturer: Volvo, total height: 3,480 mm, total length: 6,200 mm, total width: 3,000 mm, color: other, Equipment: air conditioning, Year of manufacture: 2020 Number of cylinders: 6 Empty weight: 33.660 kg Engine type: Volvo TAD871VE Lifting capacity: 18.000 kg CE mark: yes Technical condition: very good Visual appearance: very good Bwodsxfap Tepfx Adxew Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: Sweden Condition CE type: CE Hydraulic fork adjustment & side-shift, Terminal west forks, Front and rear camera, Forks 2400 mm, Freelift 1820 mm

Year of construction: 2019, condition: like new (used), functionality: fully functional, AUTOMATIC PACKAGING MACHINE FOR PRODUCTION RATES UP TO 4000 PACKS/HOUR whit a cup diameter of 60 mm. Bwedpfx Adexl Tpasxow Year of construction 2019 Intermittent rotary unit with 8 stations for container movement. · Destacking system for rigid, stackable containers. · Dosing head for liquid, viscous, solid or powder products. · Lift system for containers to allow filling from the bottom of the container. · Hopper for feeding product. · Anti-dripping nozzle. · Destacking system for pre-cut aluminium lids. · Heat sealing removable system for container and lid, for easy cleaning and maintenance. · System for extracting the container from the rotary unit. · Powered conveyor for extracting the container from inside the machine.

Condition: excellent (used), Year of construction: 2015, operating hours: 873 h, functionality: fully functional, machine/vehicle number: TT 1143, type of input current: three-phase, Techni Intec-713-G2 5-Axis Waterjet Cutting Machine with Quantum NXT ESP55 High Pressure Water Pump, Adept Water Softening Plant, Chiller, Techni PAC60 Cutting Head (5 axis), Cutting Area 2100 x 4100mm . Being sold as we have no further use for it , this is a very high spec machine that runs virtually silent unlike most other water jets .We can arrange removal and installation at cost .Price excludes vat and vat will be added for UK customers Bwodpfowc Rdfex Adxsw

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Model 31i-MODEL B Main Drive Spindle speed range 5000 Spindle motor power 18.5 / 22 kW Tool taper A2-6 Number of axis 9 Movement X-Axis Movement 165 mm Y-Axis Movement 100 mm Z-Axis Movement 770 mm Additional Equipment LNS bar interface the robot is not included Control Unit Brand FANUC Model 31i-MODEL B Main Drive Spindle speed range 5000 Spindle motor power 18.5 / 22 kW Tool taper A2-6 Number of axis 9 Bwsdpexn U D Rjfx Adxow Movement X-Axis Movement 165 mm Y-Axis Movement 100 mm Z-Axis Movement 770 mm Additional Equipment LNS bar interface the robot is not included This 9-axis DOOSAN PUMA TT 1800 SY was manufactured in 2014, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT 1800 SY machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, spindle mount: MK 3, type of input current: three-phase, table length: 560 mm, table width: 250 mm, 3 Phase 380V, 2-speed motor is running fine! Geared head with 8 spindle speeds. Spindle RPM adjustable from 100 up to 2900. Drilling & milling possible. Table size: 560x250mm MT3 spindle taper. Head height adjustable. Head can be angled. Maximum drilling depth: 115mm Made in Sweden. Bedpfx Adexdb T Djxsww Overall dimensions: 100x75x170cm Weight: 260KG – Return spring is not functioning properly. Contact us for shipping possibilities! € 2.850,00

Condition: good (used), Year of construction: 2006, Puma 700M 2006 Bedpfx Aextug Nodxjww Doosan Puma 700M CNC Lathe (2006) Controlled axes: 3, X: 470 (450+20)mm, Z: 1650mm, C: 360(0.001)gr Tools in revolver: 12 (BMT85) Spindle RPM: 3-1500, Rotating tools RPM: 30-3000 Automatic door Weight: 16,100 kg Note that this lot is located at Braås, Sweden

Condition: used, Year of construction: 2018, This machine will soon be in our warehouse! X- 350 mm Y- 550 mm Z- 510 mm A-axis -120° to +30° C-axis, table's rotation movement: ±360° Year: 2018-08 Working Time: 7190H Spindle motor: AC 11 kW (40% ED) Rapid feed X, Y, and Z axis: 30 m/min Tool magazine: 30 places Spindle taper: ISO 40 Spindle motor: AC 11 kW (40% ED) Spindle bearing inner/outer diameter: Ø 70 / 110 mm Speed range: 35-12000 rpm Max torque: 65 Nm (40% ED) Floor area of standard machine: approximately 1900 x 3060 mm Bwedpfxjxl Rkze Adxow Height of standard machine: approximately 2857 mm Weight: approximately 7000 kg Total circuit breaker: 37 kVA

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Bwjdexl Tnpopfx Adxsw

Condition: used, mileage: 987,000 km, power: 260 kW (353.50 HP), first registration: 05/2015, overall weight: 18,000 kg, fuel type: diesel, color: silver, axle configuration: 2 axles, next inspection (TÜV): 09/2025, gearing type: automatic, emission class: euro6, loading space width: 2,500 mm, loading space length: 7,450 mm, loading space height: 2,500 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Well-maintained Mercedes Benz Antos 1835 refrigerated truck equipped with Lamberet deep-freeze box body, tail lift, and Thermoking refrigeration unit (diesel/electric). Special features: - Axle load measurement system, front axle load 8.0 t - Driver’s airbag Bwedpfxjxai Dco Adxow - Audio system: CD radio (Bluetooth) - Passenger side exterior mirror with maneuvering position - 220 Ah battery - Brake connections: Standard and DuoMatic - Compressed air connection in cab - Air horn - Driver assistance system: Attention Assist (drowsiness detection sensor) - Driver assistance system: Brake Assist (Active Brake Assist 3) - Driver assistance system: Lane Keeping Assist - Driver assistance system: Roll Control Assist - Cab: steel-sprung, comfort version - 12-speed gearbox – type: G 211-12 - 12.7 cm info display with video function - Aluminum fuel tank: 290 liters, right side - Front engine PTO, prepped for Frigoblock - Reinforced engine brake - Tire pressure monitoring system - Acoustic reverse warning system (external warning signal) - Tail lift control switch - Reinforced rear cross member - Circuit breaker - Cab seats: armrest for passenger seat - Cab seats: comfort suspension seat for driver - External sun visor - Side window sunblind, driver’s door - Additional 24V socket in passenger footwell Additional equipment: - Emission standard EURO 6 - Axle configuration: 4x2 - Trailer brake – 2-line system, connections left - 24V/15-pin trailer socket - Antos - Tailpipe directed to vehicle center - Electrically adjustable and heated exterior mirrors - Rear axle differential lock - Steel air tanks - Medium air unit - Cab width: 2.30 m - Hydraulic cab tilting system - Cab: S ClassicSpace - Reinforced cab (Sweden package) - Cab floor with 320 mm engine tunnel - Suspension: leaf/air - Front springs: 2-leaf, 7.5 t - Electric window lifters - Tinted windscreen - 100 A alternator - AdBlue (urea) tank: 60 liters - Manual steel roof hatch - Rear axle crown wheel 440 - Body/chassis: chassis frame - Central locking system - Unregulated power steering pump - Front air intake - Engine: 7.7 liters, 260 kW, inline 6-cylinder diesel (OM 936) - Engine compartment encapsulation - Ramp mirror - Spare wheel - Residual heat utilization - Disc brakes on front and rear axle - Seat cover/upholstery: fabric - Cab seats: functional passenger seat - Front mudguards - Front axle stabilizer - 24V cab socket - Tachograph / digital control unit (EU compliant) - Aerodynamically shaped underbody paneling - Front underrun protection - Pre-installed toll system interface - Cranked front axle - Permissible gross weight: 18.00 t Tire condition: Front axle approx. 40%, rear axle approx. 5%. Errors and prior sale excepted!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Bsdpfx Aexn Dl Djdxeww Movement Y-Axis Movement 230 mm A-Axis Movement 1550 mm Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Technical Specification Bsdpjxm Rigjfx Adxeww Model: OptiMAX 80X Working area (X × Y): 4,267 × 2,032 mm Z-axis (height): 305 mm, motorized Machine footprint: approx. 7,925 × 3,937 mm Height: approx. 3,050 mm Weight (empty): approx. 4,150 kg Maximum material load: 1,950 kg/m² Power supply: 3-phase, 380–480 V, 50–60 Hz Noise level: < 80 dBA (during submerged cutting) Speed (X-Y): up to 8,890 mm/min Accuracy: ± 0.025 mm Repeatability: ± 0.025 mm Roundness: ± 0.076 mm Pump Type: EnduroMAX 50 HP Pressure: up to 60,000 psi (≈ 4,100 bar) Flow rate: approx. 4.5 l/min (depending on nozzle) Reliable operation, energy efficient and built for long service life Equipment & Options TiltaJet cutting head for angle compensation – delivers straight cuts without secondary finishing SRS (Solids Removal System) for automatic extraction of abrasive and particles Offered exclusively within Sweden

Condition: good (used), Year of construction: 2007, Brand: Mori Seiki Type: NT3200 Year of build: 2007 Serial number: NT320GA0030 Additional information: Run time: 7976H Maximum turning diameter (milling head): 600mm Maximum turning diameter (turret): 210mm Maximum turning length: 1045mm Spindel bore: 67mm Number of tool spaces: 40 Spindel: Kitagawa SS1666 Spindel speed: 5000 RPM Control system: Fanuc Series 31i Equipped with: tool presetter,Absolent AB oil mist filter, Enomoto chip conveyor, Ercoatius coolant filter, documentation Milling head Maximum speed: 12000 RPM Tool shaft size: C5 X-axis travel: 685mm Y-axis travel: ±125mm Z-axis travel: 1075mm B-axis travel: ±120° X/Z-axis rapid traverse: 50 m/min Y-axis rapid traverse: 30 m/min Turret Number of tool places: 12 Driven tool speed: 6000 RPM X-axis travel: 130mm Z-axis travel: 970mm X/Z-axis rapid traverse: 30 m/min Machine dimensions LxWxH: 5200x3100x3000mm Own weight: 14400 kg Including bar feder Brand: Iemca Type: VIP 80E II Year 2007 S/N: 020710QA07 Own weight: 605 KG Bar capacity: 6-80mm Bwedoxn Ddtepfx Adxsw

Condition: used, Year of construction: 2021, X Axis 24.0 in (610 mm) Bwsdsxl D Erjpfx Adxjw Y Axis 16.0 in (406 mm) Z Axis 16.0 in (406 mm) 10+1 pallet pool, UMC Max Speed 15,000 rpm Taper BT40 Magazine Capacity 50+1 Programmable coolant nozzle Air through spindle Coolant through spindle Renishaw probe WIFI camera Extra coolant filter B Axis – Tilt (S.A.E / Metric) Travel 120° to -35° Max Torque 1854 ft-lbf (2514 Nm) Brake Torque 900 ft-lbf (1220 Nm) C Axis – Rotation (S.A.E / Metric) Travel 360° / 360° Max Torque 1854 ft-lbf (2514 Nm) Max Part Swing 18.0 in (457 mm) Brake Torque 900 ft-lbf (1220 Nm) Platter Diameter 15.70 in (400 mm) Max Weight on Platter 500 lb (226.8 kg) Max Weight on Platter w/Pallet Pool 200 lb (90.7 kg) T-Slot Width 0.626 in to 0.630 in (15.90 mm to 16.00 mm) Number of Std T-Slots 5 T-Slot Center Distance 2.48 in (63 mm) Max Tool Diameter (full) 2.5 in (64 mm) Max Tool Diameter (adjacent empty) 5.0 in (127 mm) Max Tool Length (from gauge line) 12 in (305 mm) Max Tool Weight 12 lb (5.4 kg) Coolant Capacity 55 gal (208 L)

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Multivac R-140 thermoformer year of construction 2005 for both hard & soft film. Foil with 422 mm, Tool Advance 330 mm, Built in Busch 100cc vacuum pump, MAP machine, 4x different tool splittings. No 1. 2.4 17x x 130 mm Bsdsxl D U Tspfx Adxjww No 2. 1.1 283 x 365 mm No 3. 2.2 365 x 132 mm No 4. 2.2 283 x 175 mm

Condition: used, mileage: 769,300 km, power: 290 kW (394.29 HP), first registration: 06/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz 1840 ANTOS - Leaf/Air - M Classic Space - Air Conditioning - Retarder - Good Condition * Chassis Number: WDB96340310XXXXX - First Owner - German Vehicle - Bwedpfx Asxgldfjdxow * Diesel - Displacement: 10,677 cc - 290 kW / 400 hp - Euro 6 - Green Sticker - * Tire Sizes: Front Axle: 315/70 R 22.5 Rear Axle: 315/70 R 22.5 * Vehicle immediately available and ready for pickup - * Please arrange an appointment to view the vehicle - * Contact Person: Mr. Andreas Vogel * The information provided online is non-binding. * It does not represent guaranteed properties. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors, and prior sale. Special features: Work lights, audio system: CD radio, exhaust facing down to the right, 220 Ah battery, compressed air connection in the cab, aluminum compressed air tank, additional compressed air tank, electrical preparation in the cab 24V/100A, driver assistance system: Attention Assist (drowsiness detection sensor), cab: steel suspension, comfort, 10.4 cm info display with additional display, integral rear, communication interface, front engine PTO with Frigoblock preparation, reinforced engine brake, configurable special module, retarder, fifth wheel coupling, low-maintenance, automatic circuit breaker, seats in the cab: driver's seat with comfort suspension, voltage converter 24V/12V 10A, additional 24V socket in the passenger footwell, preparation/switch for lifting axle on the semi-trailer/trailer, CB radio preparation, additional heating (water), transmission oil cooler Further features: EURO 6 emissions standard, axle configuration: 4x2, axle load front axle 7.5 t, trailer socket 24V / 15-pin, Antos, exterior mirrors electric. adjustable and heated, rear axle differential lock, medium compressed air unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane departure warning, driver's cab: width 2.30 m, driver's cab: hydraulic tilting system, driver's cab: M ClassicSpace, driver's cab: reinforced (Sweden), driver's cab floor with engine tunnel 320 mm, suspension: leaf/air, suspension: aluminum front spring bracket, suspension: 7.5 t front springs, 2 leaves, electric windows, tinted windshield, 100 A generator, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 L, manual lifting roof (steel), rear axle crown gear 440, body/structure: semitrailer tractor, comfort locking system, 3-part fender, fuel tank: 390 L aluminum, unregulated power steering pump, air intake from the front, engine 10.7 Ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, splash guard front, stabilizer front axle, 24V driver's cab socket, tachograph / EC control device, underbody paneling aerodynamically shaped, underrun protection at the front, preparation for toll collection, front axle offset, water pump regulated, permissible total weight 18.00 t

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand OKUMA Model OSP-P200L Main Drive Spindle speed range 38–5000 Spindle bore 100 mm Number of axis 5 Movement Bsdpfsxl Hz Nsx Adxeww X-Axis Movement 580 mm Y-Axis Movement ±80 mm Z-Axis Movement 935 mm W-Axis Movement 1000 mm Workpiece Workpiece drm over bed 630 mm This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2016, operating hours: 3,781 h, condition: ready for operation (used), functionality: fully functional, Multivac R245 Thermoformer year of construction 2016 whit 4x different tool sizes. Built in Busch vacuum pump, Spinners for waste plastic, Foil width 462 mm, Advance 375 mm, Tools. Bwodpfx Adoxl D Ndexjw 1x 1:1 425 x 332 mm Max deep 150 mm. 1x 1:2 332 x 205 mm Max deep 150 mm. 1x 2:2 205 x 156 mm Max deep 150 mm. 1x 1:3 332 x 131 mm Max deep 150 mm. Including extra parts and heating plates very nice condition and well maintained machines since new by it's first owner.

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 6850 kg Bwedexl H Agspfx Adxsw Control Unit Brand OKUMA Model OSP-P300LA Main Drive Number of spindles 2 Spindle bore 120 mm Number of axis 5 Movement X-Axis Movement 260 mm Y-Axis Movement 115 mm W-Axis Movement 895 mm Workpiece Workpiece drm over bed 580 mm Workpiece drm over support 470 mm Turret Rotating tools Yes This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, Colimatic Thera 650 Thermoformer year of construction 2000. 1x tool splitting 350 x 210 mm Maximum deep 150 mm. ideal for large products. Foil width 422mm. Bodpfx Adoxl D Iyexjww

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Colussi Ermes Meat bin washer mod LO 13-014 for 200 liters meat bins. Year of construction 2008 heating by steam by extern heating generator. Bjdpjxl D D Ijfx Adxsww Very good condition!