Used Waterjet Sweden for sale (436)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, film width: 422 mm, machine/vehicle number: 860, TECHNICAL DETAILS Number of punches: 3 Film width: 422 mm Maximum depth: 110 mm Tool: 4-part tool (245 x 175 mm) Bjdpfexruc Iox Adxsww MACHINE DETAILS Electrical data Mains voltage: 230/400 V Frequency: 50 Hz Rated current: 25 A Rated power: 16 kW EQUIPMENT Thermoforming for rigid subfilm Rolls for plastic waste Gas mixer

Condition: used, functionality: fully functional, Item: DP-6833-LKP-L-LobePump Alfa Laval Rotary Lobe Pump Type: LKP-L6246 Stainless Steel, Acid-Resistant Pump Type: LKP-L6246 Motor: 7.5 kW 1455 RPM 2 identical units available Alfa Laval Lobe Pump Assembly – Technical Summary Drive Configuration Motor Brand: ABB Model: 3GAA132-114 Power: 7.5 kW Speed: 1455 rpm (50 Hz) Voltage: 400 V / 3-phase Bsdpfxexuqans Adxeww Protection Class: IP55 Insulation Class: F Power Factor (Cos φ): 0.82 Gearbox Manufacturer: Benzlers (Made in Sweden) Model: BC247-03 Gear Ratio: 4.21 : 1 Output Speed: 1455 / 4.21 ≈ 346 rpm Oil Type: BP GR-XP 220 Mounting Arrangement: IM B3 (horizontal, foot-mounted) Pump Section Manufacturer: Alfa Laval (Made in England, Eastbourne plant) Type: Rotary Lobe Pump (LKP-L6246 designation on pump casing) Connection: 4” sanitary fitting (inlet/outlet) Material: Stainless steel (acid-resistant) Typical Displacement: 1.5–2.0 L/rev (for 4” lobe size) Performance Data (Estimates) - Pump speed (post-gearbox): ~346 rpm (from 4.21:1 ratio) - Theoretical capacity: 31–41 m³/h (based on 1.5–2.0 L/rev) - Working pressure range: up to approx. 5–6 bar (limited by 7.5 kW drive) - Motor mechanical output (efficiency ≈0.85): approx. 6.4 kW available for pumping - Shaft power/torque: approx. 177 Nm at 346 rpm Ready for delivery!

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Bwjdpfjxrc Acex Adxew

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Bwodpfevgrh Uex Adxjw Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 2020, x-travel , mm y-travel , mm z-travel , mm MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems Bodpfx Adoxtqxboxsww offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. ----- Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 25 mm throat 255 mm bore stroke 135 mm spindle turning speed range 8, von 105-2900 U/min table-size 500 x 350 mm column diameter 100 mm spindle taper MK 3 total power requirement 0,65 / 0,9 kW weight of the machine ca. 190 kg dimensions of the machine ca. 0,5 x 0,5 x 1,7 m Unused exhibition machine at a special price: New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 degrees around the Bwodpfx Ajwqr Ibsdxsw column,chip protection with electr. Switch, drilling depth indicator. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, total length: 7,100 mm, total width: 1,200 mm, total height: 2,200 mm, film width: 462 mm, machine/vehicle number: 256275, TECHNICAL DETAILS Film width: 462 mm Mould set 1: 480 x 195 mm Maximum diameter for mould set 1: 125 mm Mould set 2: 201 x 195 mm Bwjdpfx Aoxrt Uiedxew Maximum diameter for mould set 2: 125 mm Mould set 3: 190 x 150 mm Maximum diameter for mould set 3: 100 mm MACHINE DETAILS Dimensions (L x W x H): 7,100 x 1,200 x 2,200 mm EQUIPMENT Integrated vacuum pump 3 different mould sets Winder for plastic waste Special tool: coloured knife for triangular cheese

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, rotational speed (max.): 2,900 rpm, rotational speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, overall weight: 260 kg, table length: 560 mm, table width: 250 mm, 3-phase 380V, 2-speed motor is running perfectly! Spindle RPM adjustable from 100 up to 2900. Geared head. 115mm drilling depth. MT3 spindle taper. Head adjustable in height and angle. Coolant pump in base. Cross table in good condition. Table dimensions: 560x250mm Made in Sweden! Overall dimensions: 100x75x170cm Includes all accessories shown in the pictures. Contact us for shipping options! Bwsdpfx Aexnvrvedxew €2,800.00 EX VAT!

Condition: like new (used), Year of construction: 2021, operating hours: 800 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.102 mm, 5-axis waterjet cutting system PAC 60 5-axis cutting head (60° swivel) Bwjdpfx Adsxr A Tnexew Pump Quantum NXT ESP 66 Series G4 4550 bar Chiller for NXT 55/66-G4 Pump diagnostic software Abrasive pump and container for blasting material (500 kg) Workpiece thickness measurement

Condition: good (used), mileage: 785,900 km, power: 537 kW (730.12 HP), first registration: 06/2020, fuel type: diesel, color: silver, axle configuration: 6x4, tire size: 385/65R22,5, fuel: diesel, wheelbase: 4,750 mm, brakes: retarder, gearing type: semi-automatic, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: air conditioning, crane, cruise control, retarder, trailer coupling, - Adaptive cruise control - Aluminum fuel tank - Rear work lights - Front work lights - Power brake booster - Electric windows - Electronic braking system (EBS) - ESP (Electronic Stability Program) - High beam - Heater Bsdpjxutbhjfx Adxsww - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Air suspension - Fog lights - Rain sensor - Reversing camera - Sun visor - Voice control - Lane keeping assist - Stability control - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication system - Central locking 1x SCANIA R730 B6X4NB, Opticruise, Euro 6, retarder, mileage: 785,900 km, timber transporter + Kesla, 2020, 9,000 kg front axle, first registration: 08.06.2020, year of manufacture: 03.2020, suspension: air suspension front / air suspension rear, tires: 385/65/22.5 at 70% and rear 315/80/22.5 at 90%, distance between 1st and 2nd axle: 4,750 mm, overall truck length: 10,635 mm, air conditioning, stereo system, electric windows, electric mirrors, comfort driver's seat, heated driver's seat, sunroof, always serviced properly and on schedule = serviced since new with the green maintenance card (maintenance contract)! ... in good and fully operational condition! + *Timber crane:* Kesla 2009L, 2012, 2 hydraulic extensions, Tamtron scale, 4+2 manual steering, X-CAB, fully overhauled ... in good and fully operational condition! Price: € Stockholm, Sweden For further information and photos please contact us by phone or email. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * We speak German * .---- * Shipping costs for this truck to various destinations * ----- * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices apply only for the purchase of this truck. * -----. _____ _____ General information Cab: double Technical information Engine displacement: 16,353 cc Drive system AdBlue system: Yes...

Condition: used, Year of construction: 2010, Fanuc 31I-T Spindle speed range: 3500 1/MIN Spindle motor power: 22 Kw Bar feeder: LNS Move S2 X-AXIS 255 mm Y-AXIS 110 mm Z-AXIS 670 mm B-AXIS 660 mm Number of tool slots: 12 Tool setter Axial rotary tools Radial rotary tools Max bar diameter: 80 mm Max turning diameter: 410 mm Bwsdpfx Aextf A Ujdxow

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, We can offer you a ROUNDO (Sweden) electro-hydraulic profile bending machine Model: R-3 Capacity: 14 cm³ Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-07-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Included: Brake motor Push-button control Digital readout 1 extra set of rolls for tube Ø 48 and Ø 42 mm Dutch-language manual Price for the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has been used very little! Delivery conditions: Bwedpfx Adexl Sq Aoxjw Delivery time: available from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 126 0647, KOLBE MWE 52 mixer-grinder with CARS HKW 200 crate lifter! Bjdpfxexrt Nyo Adxeww MACHINE DETAILS Power: 10.0 + 1.1 kW Connection voltage: 400 V Frequency: 50 Hz Control voltage: 24 VAC Operating voltage: 400 V Rated current: 20.5 + 2.8 A

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,800 mm, total width: 500 mm, total length: 600 mm, table width: 500 mm, table length: 355 mm, spindle speed (max.): 3,020 rpm, spindle speed (min.): 100 rpm, type of input current: three-phase, Equipment: type plate available, 3 Phase 380V, 2 speed motor is running fine! Geared head with 8 speeds. Spindle RPM adjustable from 100 up to 3020. MT3 spindle taper. Tool ejector. Maximum drilling depth: 130 mm Table size: 500x355 mm Head & table height adjustable. Good working condition! Bedpoxl Hpajfx Adxsww Made in Sweden. Overall dimensions: 60x50x180 cm Contact us for shipping possibilities! € 1,850.00 EX VAT!

Condition: ready for operation (used), functionality: fully functional, total length: 6,700 mm, total width: 225 mm, total height: 2,200 mm, working width: 1,000 mm, working length: 5,000 mm, Teflon grill for high production capacities! TECHNICAL DETAILS Grill surface: upper and lower side Grill surface width: 1000 mm Grilling length: 5,000 mm Bwjdpexrt Hxsfx Adxjw MACHINE DETAILS Dimensions (L x W x H): 6,700 x 225 x 2,200 mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 101-00886, overall weight: 750 kg, hopper volume: 240 l, production capacity: 4,000 unit/h, TECHNICAL DETAILS Bwsdpfoxrt Dwox Adxow Hopper volume: 240 liters Capacity: 4,000 kg/h MACHINE DETAILS Weight: 750 kg Motor power: 75 kW Power consumption: 142 amperes EQUIPMENT Accessories as shown in the pictures

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, The Automatic Grinder G 160 is ideal solution for optimum product processing at medium and large enterprises in particular. It's designed for fresh meat, but is capable to process blocks down to -5 degrees. Hole plate, mm: 160. Hopper capacity, I: 530. Max fresh meat production output in kg/h: 8,000. Max. mixing capacity, kg: 350 Bwsdpfxjxtnl Sj Adxjw

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Multivac T-700 traysealer for both MAP trays and Skinnpack in condition like new! ONLY 432 working hours! Bodpfx Asxrthcedxoww Fully complete whit tool rack, Vakuumpump, Tooltrolley, 2x moulds. Mould 1. 243 x 155 mm Mould 2. skinnpack 205 x 163 mm Year of construction 2013.

Year of construction: 2008, condition: like new (used), functionality: fully functional, Reepak / Duniform mod DF30 tray sealer vacuum / Gas ( MAP ) Machine whit associated air compressor. Year of construction 2008 1x tool halv gastro measure 325 x 265 mm. Bsdpfxsxrnvnj Adxjww

Condition: like new (used), Year of construction: 1989, functionality: fully functional, T. Giusti & Son Ltd s/s double jacketed mixing tank with steam boiler, serial number: J10717, capacity: 500 liter, dimensions tank: Ø 1100 mm x 2600 mm, dimensions steam boiler: 800 mm x 620 mm x 1800 mm, with switch cabinet, Bwsdpfxsxrnuws Adxow

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Fomaco salt injector mod FGM 64 SW in very good condition together whit associated cleaning system. Year of construction 2000 128 needles 4 mm. Beam width 55 cm. Bwedpjxrntgsfx Adxsw

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Vemag HP20E whit associated Vemag BC236 forming attachment. Complete line from 2017 and not used very much since new! Perfect for making Hamburgers, Meatballs, Chevachipi Etc. Bedpfx Adoxrnq Sexsww

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Multivac T300 Traysealer year of construction 2013, 2x moulds 1x 258 x 173 mm 1x 177 x 138 mm. Including tool racks spareparts and built in vacuum pump. Bwsdsxrnnwspfx Adxsw

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Poly-Clip ICA 8700 double clipper year of construction 2009. deal machine for large calibres and moulded products up to a calibre of 200 mm. Fibrous, collagen and plastic casings can be processed. The innovative iris separator makes the ICA ideal for the production of large volumes like slicer products, moulded ham, even those made of whole muscles. Bwjdpfxoxrnmyj Adxjw

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Schröder Hamax 800 year of construction 2006. HAMAX 800 whole muscle stuffer is automatic filling of fresh (for example, as restructured meat) or cured meat parts/pieces of meat (for example, as raw and cooked cured meat) in artificial casings. The fundamental principle of the machine is based on a hydraulically driven piston that presses the meat into the casings. The HAMAX 800 whole muscle stuffer forms the technical requirement for increasing the efficiency in the production of sliced goods which are calibrated in length and thickness. In combination with an automated double clipping-machine, swift and efficient processing can be reached, which was previously very time-consuming for these products. The combination of the whole muscle stuffer and the integrated cutting system is the innovative factor. This affects the exact portioning of pork loins with tendon. 2x filling pipes including 95 mm & 125 mm. Bwedpexrnkfefx Adxsw Capacity up to 1200 kg / hour.