Used Waterjet Sweden for sale (437)

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden. Nkedpfeikvliex Agwsw

Condition: ready for operation (used), Drum chipper for production of cellulose chips or fuel chips. The chipper is feeded from a vibro conveyor and feeding bin. Nedpfxjyh Umwo Agwekw Included is also Bruks chip screen type Bruks BS3. Electrical motor 75 kW. Capacity up to 60 m3 ready made chips per hour. Infeed opening , width 540 mm, height 300 mm

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 Nodeya Nf Iepfx Agwjkw THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Condition: ready for operation (used), Veneer press with 30 floors Nsdpfxoyh A E Uo Agwjkw Size of press plates 3000 x 1650 mm Hydraulically operated. Hot water for heating In-feed system and out-feed system included

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Nkedpfx Aovgrh Usgwjw Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Nkedpfx Agov T I Evewew Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,289 h, load capacity: 2,000 kg, lifting height: 4,300 mm, fuel type: gas, mast type: triplex, construction height: 2,080 mm, empty load weight: 3,720 kg, total height: 2,080 mm, total length: 2,550 mm, total width: 1,150 mm, Equipment: sideshift, Specification: Forklift type: LPG Item code: 11027 Njdpfx Asyrqi Ejgwskw Manufacturer: TOYOTA Model: 06-8FG20F Year: 2015 Lifting capacity (kg): 2000 Mast type: Triplex Lifting height (mm): 4300 Drive type: Hydrostatic Operating hours: 4289 Country: Sweden Weight (kg): 3720 Dimensions (L x W x H, mm): 2550 x 1150 x 2080 Overall height (mm): 2080 Forklift attachments: Side shift, Front and rear windscreen Note: The forklift has been inspected and is technically in good condition. Full technical service will be performed prior to delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,151 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 3,300 mm, empty load weight: 5,212 kg, total height: 2,230 mm, total length: 2,310 mm, total width: 1,200 mm, Equipment: sideshift, Specification: Forklift type: Electric forklift Item code: 10939 Manufacturer: TOYOTA Model: 8FBMT25 Year: 2016 Nkedjyrqhujpfx Agwjw Lifting capacity, kg: 2500 Mast type: Duplex with free lift Lifting height, mm: 3300 Operating hours: 4151 Country: Sweden Weight (kg): 5212 Length x width x height, mm: 2310 x 1200 x 2230 Overall height, mm: 2230 Forklift attachments: Sideshift, Cabin Note: The forklift has been inspected – technically sound. A full service will be performed prior to delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,665 h, load capacity: 2,000 kg, lifting height: 2,500 mm, fuel type: electric, mast type: duplex, construction height: 1,890 mm, empty load weight: 1,275 kg, total height: 1,890 mm, total length: 2,240 mm, total width: 790 mm, Specification: Forklift type: Electric stacker Item code: 11091 Manufacturer: TOYOTA Model: SPE200D Year: 2019 Lifting capacity, kg: 2000 Mast type: Duplex with free lift Lifting height, mm: 2500 Operating hours: 4665 Country: Sweden Weight (kg): 1275 Dimensions (L x W x H, mm): 2240 x 790 x 1890 Overall height, mm: 1890 Nodpeyrpvqofx Agwokw Attachments: Battery charger Note: The stacker has been inspected and is in sound technical condition. A full technical service will be carried out before delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,764 h, load capacity: 2,000 kg, lifting height: 4,300 mm, fuel type: electric, mast type: triplex, construction height: 4,300 mm, battery capacity: 630 Ah, battery voltage: 48 V, overall weight: 3,515 kg, total height: 2,030 mm, total length: 1,980 mm, total width: 1,150 mm, Equipment: sideshift, Specification: Forklift type: Electric forklift Item code: 11128 Manufacturer: TOYOTA Model: 8FBE20T. Year: 2016 Lifting capacity, kg: 2000 Mast type: Triplex Lifting height, mm: 4300 Operating hours: 3764 Nkjdpfjyrpt Ajx Agwsw Country: Sweden Weight (kg): 3515 Dimensions (L x W x H, mm): 1980 x 1150 x 2030 Overall height, mm: 2030 Forklift attachments: Side shift, Battery charger Battery: 48 V / 630 Ah

Year of construction: 2002, condition: excellent (used), ABB IRB 140 Country of manufacture: Sweden Year of production: 2002 Reach: 800 mm Control: M2000 Load capacity: 6 kg Nedpfx Agjpuz Dyowekw

Condition: excellent (used), Year of construction: 2008, load capacity: 1 kg, Cell ABB IRB 340 M2004 Type B Robot - 34-51225 Country of production: Sweden Production date: 2008 Nkodpfxeqffhhs Agwow Control system: ABB M2004 Number of axes: 4 Load capacity: 1 kg Robot weight: 140 kg Range: Diameter - 1130 mm Height - 250 mm Rotation - no limit Cell dimensions: Length - 150 cm width - 145 cm Height - 240 cm The cell has two belt conveyors with a length of 65 cm and a width of 100 cm.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Nkedpfx Agsvn Tg Ijwow Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, rotational speed (max.): 2,900 rpm, rotational speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, overall weight: 260 kg, table length: 560 mm, table width: 250 mm, 3-phase 380V, 2-speed motor is running perfectly! Nkjdoxnvrvopfx Agwsw Spindle RPM adjustable from 100 up to 2900. Geared head. 115mm drilling depth. MT3 spindle taper. Head adjustable in height and angle. Coolant pump in base. Cross table in good condition. Table dimensions: 560x250mm Made in Sweden! Overall dimensions: 100x75x170cm Includes all accessories shown in the pictures. Contact us for shipping options! €2,800.00 EX VAT!

Condition: good (used), Year of construction: 1968, Malcus MC40 Centerless Cylindrical Grinding Machine Manufacturer: Malcus Halmstad, Sweden Model: MC-40 Nsdjx Aq A Eepfx Agwjkw Year of Manufacture: 1968 Control Panel: Mechanical push-button control with main switch and emergency stop Grinding Units: Two opposing units with adjustable guide and grinding supports Machine Construction: Heavy-duty cast iron frame Condition: Used, fully functional The Malcus MC40 is a robust centerless cylindrical grinding machine made in Sweden, renowned for its reliable precision during continuous industrial operation. The machine features a solid cast iron construction which minimizes vibration and ensures consistent grinding results. Its opposing grinding and guide assemblies can be precisely adjusted, making it ideal for machining rotationally symmetrical workpieces. An integrated dressing device keeps the grinding wheel in optimum condition during use. The mechanical control panel with its clearly arranged elements enables intuitive operation of the grinding process. Designed for high stability and long service life, this machine is an excellent choice for workshops and production facilities seeking a dependable solution for centerless grinding. No guarantee is provided for the accuracy, completeness, or currency of the information given.

Condition: new, functionality: fully functional, Randek Truss System NT produces roof trusses using Nkodpfx Agexwkuqewew C-press heads, movable magnetic fixtures on a steel floor and one of our many crane systems. Crane systems: Wall mounted crane Column crane Motorized overhead crane Counter balanced crane Press head: 23T, 27T, 35T, 50T Laser system as an option.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 32 h, functionality: fully functional, controller model: RC10A POS, We offer this ex-display machine FANUC CRX-10iA/L industrial robot, year of construction 2024. The robot has been used only during a 4 day exhibition, so in reality it is factory new. Serial number: YS76252-003 Controller type: RC10A POS Nkedpfx Agsx Upikswew Supply voltage range: 100-120 / 200-240 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, For sale: Salmatec Maxima 700 pellet press in full working condition, installed in a Rematec container with electrical cabinet and a tent shelter. Capacity – up to 3 t/h. The line includes: - Press and hammer mill: Salmatec – reliable German quality with high efficiency and durability. - Conveying and dosing equipment: Rematec – robust and precise material handling at every stage. - Additional equipment: cyclones, sieves, cooler, control cabinet, etc. - Tent shelter. Key advantages: - High production capacity – up to 3 t/h. - High-quality European manufacturer components. - Suitable for professional pellet production from wood biomass, agro-biomass or other raw materials. - Fully operational line – demonstration possible. - Available immediately. Dismantling and transport are to be arranged by the buyer. We can recommend a company to assist with this process. The equipment can be inspected in full working order in Sweden. Nedpfxsit I Rts Agwjkw All foundation drawings and DWG files are available. Price: EUR 650,000

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Jungner Sweden Built in 1995 Accessories Nodpfx Agjwdihrowokw

Condition: used, Motor 90 Kwt Nedsygcy Sopfx Agwjkw

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 4a99688d-3381-4979-8e5b-43, Year of construction: 2022, operating hours: 164 h, empty load weight: 530 kg, construction height: 525 mm, construction width: 400 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item by the deadline of 28/02/2026! Hardly used demonstration machine! TECHNICAL DETAILS Build volume (single nozzle): 525 × 400 × 400 mm Build volume (multi-nozzle): 500 × 400 × 400 mm Build chamber volume: 84 l Layer height: min. 50 µm, max. 250 µm Accuracy: ±125 µm or ±0.0015 mm per mm Process: Fused Filament Fabrication, Continuous Fiber Reinforcement MACHINE DETAILS Temperature control: up to 200 °C Extrusion system: Direct-drive print head with two nozzles Materials Thermoplastics: Vega™, ULTEM™ 9085 filament, Onyx®, Onyx FR Continuous fibers: Carbon Fiber, Fiberglass, Aramid Fiber (Kevlar®), High Temperature Carbon Fiber, Carbon Fiber FR Dimensions & Weight Nedpfxox Ttife Agwekw Machine dimensions: 1,325 × 900 × 1,925 mm Weight: 530 kg Print head weight: 3 kg Operating hours: 164 h EQUIPMENT Eiger software Direct-drive print head with three nozzles Compatible with various thermoplastic and fiber materials Ethernet port IEC/UL/CSA 62368-1 certification CE mark EU Machinery Directive compliance

Year of construction: 2001, condition: good (used), Item: A-01537- mixer tank 4000L Nedeh A Hb Ropfx Agwskw Rectangular mixer tank with insulation and connection for heating/cooling tank, Capacity 4.000 L, Stainless Steel quality AISI316, Insulated, man-way at top, double jacket press 3 bar, working temperature 95 C, agitator inside from top. Brand Food-Tech Sweden 2001. 2 pieces identical!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,537 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,750 mm, battery capacity: 125 Ah, battery voltage: 25.6 V, empty load weight: 1,246 kg, total height: 1,750 mm, total length: 2,160 mm, total width: 800 mm, Specification: Forklift type: Electric stacker Nkodpfxsylmmgs Agwjw Item code: 10759 Manufacturer: TOYOTA Model: SPE140L Year: 2018 Lifting capacity, kg: 1400 Mast type: Duplex with free lift Lifting height, mm: 2350 Operating hours: 5537 Country: Sweden Weight (kg): 1246 Dimensions (L x W x H), mm: 2160 x 800 x 1750 Construction height, mm: 1750 Battery: Li-ion 25.6/125Ah Note: The stacker has been inspected – technically sound. A full technical service will be performed prior to delivery.

Condition: excellent (used), Disc chipper with horizontal feed work type Bruks 1502M with chip screen type Bruks BS3. Electrical motor 55 kW. Electrical control cabin with starter included. The chipper is suitable for sawmill waste and small diameter logs. Nsdpfx Agoyaqbqswjkw Capacity up to 50 m3 ready made chips per hour. Infeed opening , width 440 mm, height 275 mm

Condition: used, Year of construction: 2010, X axis: 700mm Y axis: 560mm Z axis: 560mm Table Load: 500kg Magazine positions: 30 / BT40 Nksdpfex Hypxex Agwew Max. spindle speed: 12000RPM Spindle oil chiller Through spindle coolant Floor space W x D (mm) 2,235 x 2,420