Used Water Treatment Plant for sale (10,775)

Condition: ready for operation (used), Year of construction: 2018, Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible. Chedpfeygmcdex Ap Dod

Condition: excellent (used), mileage: 123,456 km, total length: 5,900 mm, total width: 2,450 mm, total height: 2,160 mm, Water treatment system, 3000 liters Chedozdryhepfx Ap Djd Air conditioning Auxiliary heater Deutz engine 20 kW diesel engine Generator 5.90 x 2.45 x 2.16 m Only 100 operating hours Like new! = Further information = Year of manufacture: 1999 Design year: 1999 Model year: 1999 Technical condition: very good Optical condition: very good

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,591 mm, total width: 2,438 mm, total length: 2,991 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 30 kWh, DESALINATION PLANT HF-RO: ULTRAFILTRATION AND REVERSE OSMOSIS ON A SKID The HF-RO combines hollow fiber ultrafiltration with seawater reverse osmosis. The ultrafiltration removes sediments, colloids, bacteria, and viruses and feeds the reverse osmosis directly, without an intermediate tank. This allows the system to process raw water that would quickly clog a conventional reverse osmosis system with cartridge filters: nearshore seawater, harbor water, river mouths, and water with highly variable turbidity. PERFORMANCE DATA (Design for 36,000 mg/l, 25 °C) - Inlet flow: 5.0 m³/h - Permeate flow: approx. 2.06 m³/h, approximately 48 m³/day with 24-hour operation - Inlet salinity: 250 to 43,000 mg/l (sea, brackish, and river water) - Inlet temperature: +2 to +33 °C - Inlet turbidity: up to 300 NTU, sediment up to 150 mg/l - Permeate: 150 to 500 mg/l, 300 to 1,000 µS/cm, retention rate 99.6% PROCESS 1. Disc filtration: 2 automatic disc filters 2" in duplex operation, 100 µm, backflushing with filtrate and compressed air during operation 2. Hollow fiber ultrafiltration: 4 modules, outside-in, 0.01 µm (100,000 Dalton), filtrate approx. 0.2 NTU, cyclic backflushing with air, the remaining modules continue to produce 3. Reverse osmosis: low-pulsation axial piston high-pressure pump (4.08 m³/h at 63 bar, motor 8.5 kW), 4 RO modules in GRP pressure pipes, max. 65 bar, automatic pressure and flow control CLEANING - integrated CIP for ultrafiltration and reverse osmosis Chedpfx Apo Ahqpgo Dod - cleaning tank 2 x 100 l with 7.5 kW heater - 3 pneumatic dosing pumps for cleaning agents and chlorine - programmed disinfection, long-term preservation, and re-commissioning EQUIPMENT - materials: low-pressure ABS, high-pressure 1.4539 and 1.4410 super duplex, high-pressure pump 1.4462 duplex, tanks PP, frame stainless steel - valves in only two nominal sizes, interchangeable pumps, low variety of spare parts - PLC with 15.6" touch panel, Ethernet interface for remote monitoring - control of a frequency-controlled inlet pump - control cabinet 400 V / 50 Hz, approx. 18 to 20 kW, IP65 DIMENSIONS - main skid approx. 1,400 x 1,200 x 2,020 mm (L x W x H) - RO module stand approx. 600 x 550 x 1,990 mm APPLICATIONS Drinking and utility water for coastal and island supply, resorts and camps, desalination of harbor and river mouth water, process water for industry on the coast, emergency water supply, pilot operation for larger projects. SCOPE OF DELIVERY Main skid with disc filters, ultrafiltration, high-pressure pump, CIP system and control cabinet, RO module stand with 4 modules, internal piping and wiring, documentation (P&I, layout, process description). Not included in the scope of delivery (optional): inlet pump, compressed air supply, container housing, transport, installation, commissioning, training. NOTE We will confirm the binding performance after you provide your water analysis. Inspection and functional testing possible before purchase. Purchase or lease-purchase. English brochure available upon request.

Condition: used, Osmosis / water treatment system with Heyl testomat 2000 further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested sample photos sample pictures A viewing in Rietberg is possible! If you have any further questions, please contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material and legal defects! Csdetzxuyspfx Ap Dehd With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: new, Year of construction: 2017, Gas flame treatment system Arcotec FTS 4005 DR som, manufactured in week 42 of 2017. The machine is new and unused and has CE certification. Operating voltage: 400V, power: 7kW. The gas type is preset to propane, but natural gas can also be used. Csdpfsd Rik Aex Ap Dohd Burners: 4x MB3-500S/2E. The materials that can be treated are metal sheets. The gas flame treatment system is intended exclusively for the thermal pre-treatment of metal sheet surfaces in order to improve the adhesion of printing inks, lacquers, adhesives, foam, etc. The machine cost over €200,000!

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: VAN18-0015, power: 995 kW (1,352.82 HP), EX Diageo 2017 BINDER / HERZ Biomass-Fired Steam Boiler Plant – Complete System Boiler capacity: 995 kW, as stated on the manufacturer’s nameplate. Complete industrial biomass steam generation plant available from Rosemaund Farm Distillery in Herefordshire, UK. Installed and commissioned in 2017 and formerly operated as part of the Chase Distillery site during its period of Diageo ownership. The plant is now surplus to requirements following a change in production strategy. The installation is offered substantially complete and includes: • BINDER / HERZ biomass-fired steam boiler plant • Hydraulic walking-floor fuel hopper • Screw and inclined fuel conveyors / auger stoking system • Economiser • Flue gas and ash collection equipment • Ash removal conveyors and collection system • HERZ / BBSM plant control panel • Flue, fans and associated fittings • BYWORTH insulated steam accumulator, approx. 23m³ • Water treatment equipment • Steam blowdown vessel • Condensate recovery unit • Hotwell and associated pipework/platforms Boiler reference: VAN18-0015 Year: 2017 Chsdpfoz Ik Aaex Ap Ded Steam accumulator: BYWORTH M847, 2018 The plant remains installed and can be inspected by appointment. An independent engineering inspection and functional test can be made available to serious purchasers. Sale basis: Ex-works, Herefordshire, United Kingdom. Purchaser to arrange dismantling, loading and transport. Full technical information, photographs and further documentation available on request.

Condition: used, Year of construction: 2015, Electronically controlled dual system for softening particle-free water. With two pressurised tanks made of GRP. Freely adjustable cycles with time or quantity-controlled regeneration. With brine tank. Additional title: Double system with GRP tanks, Softening with a resin ion exchanger Operating pressure: 8 bar Operating temperature: 40 °C Voltage: 230 V Frequency: 50 Hz Material: vessels from GFK Chedpfx Aew U D S Esp Dod Features: Pre-filter, valve block, water meter, 2 x GRP tanks, various hoses

Year of construction: 2007, condition: good (used), Filtration unit consists of: water tank, gravel filter, pressure pump, activated carbon filter. System for insulating glass production line. Width: 2000 mm / water tank 2100 mm. Height: 2200 mm / water tank 1700 mm. Depth: 600 mm / water tank 750 mm. Cjdpfsw I Hgrex Ap Dehd Weight: approx. 250 kg / water tank: approx. 100 kg.

Condition: good (used), Year of construction: 2007, Single-stage reverse osmosis system. Model: R0 04-1 with EWMK40 2xRVMR1ACM Chodpfszqtp Rex Ap Ded Width: 880 mm Height: 1450 mm Depth: 380 mm Control cabinet dimensions: Width: 500 mm Depth: 250 mm Height: 500 mm Total weight: 120 kg Condition: good, second-hand

Condition: good (used), System for the production of purified water / ultra-pure water including plans and instructions The Rocedis system can be loaded/unloaded. Inspection is possible by appointment at my warehouse in 06295 Eisleben. Chedop Eyvfopfx Ap Ded

Condition: used, Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 70 hl holding tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure. - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system Capacity: 20000 l/h Csdey Ti Anspfx Ap Djhd Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar Gross volume buffer tank: 7060 l ; overpressure up to 4 bar Residual oxygen content appr.: 0,010 - 0,015 mg/l Operation / Control: Simatic S5 Material: stainless steel Position: mounted on stainless steel frame with feet Features: 2 x degassing vessels; pressure tank; centrifugal pumps; vacuum pump with separator; CO₂ dosing (via needle valve); flow, pressure and level measurements; switch cabinet; pipe panel; various pipework, valves and fittings Additional title: cold degassing via CO2-Stripping

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Cedpfx Apexbqr Dj Dshd Operation / Control: Control cabinet with touch-screen display / WAGO Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: as good as new (ex-display), Year of construction: 2026, Parts cleaning machine / combination spray cleaning system, type L101 HP Automatically operated hot water parts washing machine with basket drive via gearbox motor, stainless steel washing pump (manufacturer: Lowara), spray system with stainless steel nozzles Additionally, manual cleaning with high-pressure nozzle (60 bar) and foot switch, air blow-off gun, large viewing window with gauntlet gloves, LED interior lighting Cjdpfx Aod R Ahlep Djhd - Basket diameter: 910 mm - Usable height: 490 mm - Max. load weight: 200 kg - Spray pressure (washing pump): 2.3 bar - Spray pressure (HD pump): adjustable up to max. 60 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature - 60°C) - Machine dimensions (L x W x H): 1,300 x 1,500 x 2,100 mm - Empty weight: approx. 200 kg ++Wash cycle timer freely adjustable (minutes and hours) ++Complete cleaning machine (internal components and external housing) made of ++stainless steel 1.4301 ++Water circulation and loading basket made of stainless steel 1.4301 ++Bath cover with fine filter (2,000 microns) ++Operating hour counter ++Steam extraction with condensate return ++Omron timer for time setting in seconds/minutes/hours OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings Chedpfexzqt Ijx Ap Dod

Condition: good (used), Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW Csdeb A Ngpjpfx Ap Dshd -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

Year of construction: 2006, condition: like new (used), Details on request Chodpfx Ajfla Emsp Djd

Condition: used, Additional title: with automatic regeneration Nominal flow: 9800 l/h Pressure working area: 6 bar pressure class: 8,5 bar Operating temperature: 25 °C Ambient temperature: 35 °C Current: 0,35 A Voltage: 230 V Frequency: 50 Hz Weight: 390 kg Chodjw Tbunepfx Ap Dod Features: 2 x softening tanks (resin-filled); brine tank; valves and pipes

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available. Chodpfxeflz Hds Ap Dsd

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, Cedpelxzl Eefx Ap Dshd - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc.

Condition: new, Mobile Cleaning Centrifuge ZS21-M EUR – Efficient Process Water Treatment | Made in Germany The ZS21-M EUR from Eurotec Innovation is the ideal solution for economical and sustainable solid-liquid separation in industrial applications. Thanks to its mobile design and plug-and-play system, this unit (new machine) is ready for immediate use and can be flexibly deployed in a wide range of production environments. Perfect for companies looking to reduce operating costs while optimizing their processes. Numerous additional variants and custom designs available on request. Machine type: Process water centrifuge (solid-liquid) Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Applications: Vibratory finishing, general solid-liquid separation, coolant (metalworking fluid) treatment, wet blasting systems, etc. ⚙️ Technical Data: Cleaning capacity: up to 30 liters/min Speed: approx. 4,160 rpm Centrifugal force: up to 2,070 g Drive power: 1.5 kW Dirty water tank: approx. 99 liters Clean water tank: approx. 93 liters Voltage: 380 V / CEE 16A Your Benefits at a Glance ✔ Maximum mobility thanks to integrated trolley ✔ Compact design – flexible use in any production environment ✔ Extremely high separation performance due to >2000 g centrifugal force ✔ Significant cost savings through a closed water circulation system ✔ Reduced use of chemicals (e.g. compounds) ✔ Plug & Play – ready for operation within minutes ✔ Designed for continuous operation – high availability ✔ Environmentally friendly solution through resource conservation 🏭 Typical Applications: Cedpfx Ajf Sqfqsp Dohd Vibratory finishing / tumbling Metal processing & metalworking fluids Wet blasting systems Washing, coating & phosphating processes Cleaning of emulsions & suspensions General industrial liquids Equipment: Dirty water buffer tank with agitator Double diaphragm compressed air pump PLC control system & automated operation Modular expandable & customizable From development to production, we supply all products from a single source – all “Made in Germany.” ----- We are happy to provide individual consultation and prepare a suitable offer. Simply send a non-binding inquiry! ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, including our general terms and conditions and information on the right of withdrawal along with legal notice details, before any purchase/contract conclusion is made.

Condition: used, Veolia Water System, Model - Orion 2000 Orion™ is a skid-mounted, multi-technology purified water production system. Codpfjz Ic T Rox Ap Dohd Offering softening, reverse osmosis and continuous electrodeionization (CEDI) technologies that can be fully or partially hot water sanitized. Ideal for use as a pharmaceutical water system for the generation of purified water. Orion is digitally-enabled to offer the ability to remotely monitor any parameters you want.

Condition: good (used), Emulsion separation system, oil-water separation system (for removing oil from condensate in compressors) Chedpfx Asgvu Tgsp Djd The most cost-effective and permanently reliable solution to this problem is usually the separation of oil and water from dispersed condensate. The treated water meets the legal requirements for discharge into the sewer system.

Condition: new, functionality: fully functional, power: 125 kW (169.95 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Csdpfx Ajxp Uy Uep Djhd Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, LG WATER SOLUTIONS LG SW 400 GR REVERSE OSMOSIS MEMBRANES – 36 UNITS Lot of 36 new and unused LG Water Solutions reverse osmosis membrane elements. All units remain sealed and originate from the surplus spare-parts stock of a PET manufacturing plant. TECHNICAL DATA Manufacturer: LG Water Solutions Model: LG SW 400 GR Equipment type: Reverse osmosis membrane elements Application: Seawater reverse osmosis (SWRO) Dimensions: 8 × 40 inches Certification: NSF certified Quantity available: 36 units Condition: New, unused and sealed Codpfx Apszvlrzs Dohd Origin: Surplus spare-parts stock from a PET manufacturing plant

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Chedpfx As Aa Ngzjp Ded Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.