Water treatment

Eurowather KF-RVMR1-ACM61

Condition: good (used), - Completely overhauled by us, ready for immediate use - Type: 100013 - Serial number: 011136 - Glass thickness 2-12 mm - Minimum glass dimensions 120 x 80 mm - Max. Washing width: 1000 mm - Dimension: L=2900mm W=1650mm H=1250mm - Roller spacing 55mm -3 pairs of brushes / 1 pair of racks Hedper Nvldofx Ah Hjnw - Connected loads: 380/50V, 13kW - Price on request

Condition: good (used), Gas filling device for 4 filling stations Hjdpfx Ahslfb T Do Honw

Year of construction: 1996, condition: ready for operation (used), A Forel multi-pane insulating glass production plant with fixed spacer and Swiggel is available. Glass production options: 2-pane/3-pane, layering: coated/uncoated, insulating glass pane dimensions X/Y min./max.: 400mm x 200mm/2500mm x 2000mm, pane thickness range: 12mm-50mm, total system length: 30200mm. System components: 1) Inlet to the washing machine, 2) Washing machine, 3) Outlet from the washing machine, 4) Place spacer on inlet, 5) Place spacer on outlet, 6) Place spacer on outlet, 7) Inlet assembly station, 8) Assembly station, 9) Outlet assembly station, 10) Inlet roller press (no gas filling press), 11) Outlet roller press, 12) Roller tilting table for removal. Documentation available. On-site inspection is possible. Hnodpfx Asugv R Ioh Hew

Year of construction: 1999, condition: excellent (used), Glass tilting and transport table TRIULZI-IG Hydraulic With castor rollers Rollers are moving down for 360 degree glass movement (for sealing) 3600 mm length and 2400 mm working height Good working order Hnjdoiy Dtbepfx Ah Hjw Good condition As is Available immediately

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 2000.4 Max. Glas-height: 2.000 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks Hodowd Raiopfx Ah Henw incl. vacuum system for drying zone LED lights on the outled for inspection

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Flow rate: 12 l/min. - motor: electric 4-pole 230V 2,2kW, 1400 1-min - dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START device - Handle with holders for mains cable and high pressure hose - Easy maintenance by simply removing the front panel Hnjdpfxogcbzce Ah Hjw - Large wheels (220 mm Ø) for easy movement on steps and over uneven terrain - Pressure gauge - Built-in professional relief valve - Delayed TotalStopp - Pulsating system - Rotary switch - Thermal motor protection - Stainless steel manual hose reel with 30 m of 1/4" HD hose - 2 pieces 1/4" F pipe cleaning nozzles - Gun with wash lance and flat spray nozzle The CJ-1E is a mobile high pressure washer ideal for cleaning and unclogging pipes 30 to 120 mm. Equipped with a 2.2 kW and 230V electric motor, it can be used in apartments, houses or commercial spaces for sinks and toilets, as well as garden and general cleaning. The Comet LW-K pump with Easy-Start and pulsation function guarantees extreme reliability and high cleaning performance.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. Hjdpfx Asr Ak Exeh Honw There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: good (used), Compact storage system with 12 stations. Load capacity per shelf: 2700 kg. Glass support: 280 mm. Length: 5900 mm, depth: 3600 mm, Height from floor to glass shelf: 290 mm, Height from glass shelf: 2040 mm, Hedsu R Rmuopfx Ah Hsnw Total height from floor: 2330 mm.

Condition: excellent (used), Year of construction: 2008, 2-component extruder HDT HD Pro 6 Easy SI Year of production: 2008 (Overhauled in 2019) For Silicone Hydraulic Very good and clean condition As is Available immediately Hnodpewngagsfx Ah How

Year of construction: 2016, condition: ready for operation (used), Compressed air supply: 6bar, connected load: 2.7kW, weight: 450kg with documentation and Single-Head Welding Machine Rottler und Rüdiger Roweldo S X7, year of construction: 2016, an inspection is possible. Hnedpegfbqnefx Ah How