Used Vice for sale (1,194)

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Nedofg E H Iopfx Akiown Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg Nwedpfxjfg E H Ne Akien Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made Njdpfxefg E H Ss Akiswn * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW Nwjdpfx Aksfg E H Tjisn weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, Year of construction: 2024, - Mobile scissor lift table with platform base frame and aluminum worktop format 1000x600mm - Operation for the up / down stroke takes place via a hydraulic foot pump - load capacity 200 kg - Construction height 400 mm - Useful stroke 610 mm - Maximum height 1010 mm - platform 1000x 600 mm - Weight approx. 35 kg - Swivel castor 2 pieces with brake, 2 pieces without brake - Wheel Ø 125 mm Nedpfsfhbvnjx Akiswn - Color gray aluminum

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 37 + 74 m/min table height 940 mm Nwsdpfx Akjfd Abaeisn total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm Nwodpfxsfgyh To Akijn band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H Njdefgyifopfx Akiewn standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 Nodpfsfgyigsx Akiewn saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: MITSUBISHI, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Spindle speed range: 60–15,000 rpm Spindle speed control: stepless Tool changer: vertical Magazine capacity: 12 Tool interface: SK 30 Workpiece clamping area: 400 × 250 mm MACHINE DETAILS Control system: MITSUBISHI Njdpsz Hxb Uofx Akijwn Jaw width: 100 mm EQUIPMENT Fixed angular table Dual-pallet changer 4 × Allmatic vices Various tool holders SK 30 Electronic handwheel Full-protection enclosure with sliding doors and interior lighting Coolant system with paper band filter Coolant system Two-color signal light Chip conveyor 6 × Machine feet Operating manuals

Condition: used, functionality: fully functional, Year of construction: 2014, LANG Eco Tower 60 with Eco Feed and extensive clamping system package for sale For sale is a LANG Technik automation system consisting of an Eco Tower 60 and an Eco Feed, manufactured in 2014. The system was used productively until recently and has already been professionally dismantled. Ideal for automating CNC machining centers and increasing machine uptime. Njdpez Nxdpefx Akiown Scope of delivery: 1 × LANG Eco Feed loading system, manufactured in 2014 1 × LANG Eco Tower 60 loading tower, manufactured in 2014 40 × LANG Eco-Grip vices, 77 mm, steel base 20 × LANG Eco-Grip vices, 77 mm, aluminum base 1 × Vice carriage 1 × LANG Quick-Point clamping tower 1 × Pneumatic interface between handling system and clamping tower 1 × Operating manual 1 × Installation manual Condition The system operated flawlessly in production until it was dismantled. An inspection is possible after prior arrangement. Transport Pick-up only Loading and transport must be arranged by the buyer. Terms of sale Sale exclusively to commercial businesses and entrepreneurs No sale to private individuals Sale subject to exclusion of liability for material defects No guarantee or warranty on condition Inspection possible after arrangement Price Price is net plus applicable VAT VAT will be shown on the invoice. If you are interested, have any questions, or would like to arrange an inspection, please do not hesitate to contact us.

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW Nwedpfxoz I T Rms Akien tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: used, mileage: 162,365 km, power: 120 kW (163.15 HP), first registration: 09/2014, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,961 mm, total width: 1,993 mm, total height: 3,340 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Buy online. Finance digitally. Have it delivered nationwide. Chat now via WhatsApp: Quick and easy way to contact our sales consultant. Internal ID number: 3651 Your advantages with us: Digital consultation by phone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle – whether old or new Optionally available: 12–60 months used car warranty (valid throughout the EU) * New inspection * New technical inspection & emissions test * Nationwide delivery * Rear-view camera can be retrofitted upon request Vehicle highlights: * XXL panel van: Super high roof & extra long * Complete bott workshop equipment with vice * WAECO PerfectPower inverter (230 V) * Extendable loading platform * Automatic transmission * Rear-view camera * Fixed trailer hitch – 2,000 kg towing capacity * Permissible total weight 5,000 kg – high payload * 2.1 liter CDI with 120 kW (163 hp) * Yellow warning lights (rotating beacons) registered * Euro 6 – green environmental badge Equipment overview: Loading area & workshop conversion: bott shelving system on both sides * Drawer & small parts modules * Workbench with vice * WAECO PerfectPower inverter * Extendable loading platform at the rear * Super high roof * Sliding door on the right * Rear doors Comfort: Automatic transmission * Rear-view camera * Radio with display & Bluetooth hands-free system * Multifunction steering wheel * Central locking * Electric windows * Double passenger seat Safety: ABS & ESP * Driver airbag * Immobilizer Technology: 2.1 liter CDI diesel – 120 kW (163 hp) * Automatic transmission * Rear-wheel drive * Euro 6, green environmental badge Nsdpfx Aksz Sizleiown * Vehicle length 6,961 mm, height up to 3,340 mm * Permissible total weight 5,000 kg * Fixed trailer hitch, towing capacity 2,000 kg braked / 750 kg unbraked * Yellow warning lights front & rear (registered) * Paint: White * First registration 09/2014 Do you want to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: WhatsApp: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are reserved. The photos are AI-edited and serve only as an example to illustrate the size and equipment of the vehicle. The definitive condition of the vehicle is determined exclusively by the purchase contract on site or by written assurances.

Condition: good (used), Year of construction: 2012, cutting diameter 260 mm saw band length 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square 260 x 260 mm capacity 60 degrees: flat 320 x 260 mm cutting length min. 6 mm cutting speed 12 -120 m/min Control KASTO BasicControl total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade; designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, Njdpoz Dxr Ijfx Akiewn including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade; selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable from 0 – 300 mm/min • Hydraulic saw blade tensioning • Double-vice system: workpiece clamped on both sides of the saw blade • Linear guides on saw head, material feed, and vice assemblies • Saw blade retraction mechanism for contact-free withdrawal of the blade from the cut channel • SpeedControl (minimum speed monitoring) • Material feed: single stroke up to 850 mm, multiple feed up to 9,999 mm, chain-cut capability down to 250 mm cut length • Control system: KASTO BasicControl with 5.4" color touchscreen

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: orange, overall weight: 7,200 kg, empty load weight: 7,200 kg, operation weight: 7,400 kg, tire condition: 80 %, axle configuration: 6x2, number of seats: 2, first registration: 12/2014, shovel volume: 3.8 m³, suspension: air, Year of construction: 2014, operating hours: 6,100 h, Equipment: adjustable chassis, hydraulics, WE HAVE THREE CATERPILLAR ASPHALT PAVERS IN STOCK: TWO ORANGE AND ONE YELLOW. The following offer applies to a 2014 Caterpillar AP300D with 6,100 operating hours, equipped with an AS3173 working table. For sale is a professional asphalt paver designed for the construction and renovation of surfaces in small and medium-sized road projects. Its compact dimensions, hydrostatic drive, and hydraulically adjustable working width make it suitable for use in urban areas, on local roads, in parking lots, and on bicycle paths. MACHINE SPECIFICATIONS • Manufacturer: Caterpillar • Model: AP300D Nodpfxjz I Srcs Akijwn • Year of manufacture: 2014 • Operating hours: 6,100 hours • VIN/PIN: CATAP300JTEN00136 • Chassis: wheeled • Working table: Caterpillar AS3173 • Table serial number: DLC00589 • Weight as indicated on the manufacturer’s plate: 7,400 kg • Maximum permissible total weight: 7,750 kg • Country of manufacture: Italy CATERPILLAR C4.4 ENGINE The four-cylinder Caterpillar C4.4 ACERT diesel engine with a displacement of 4.4 liters provides power to the machine's drive and working units. • Gross power: 55.5 kW / approximately 75 hp • Net power according to model documentation: 50.9 kW / approximately 69 hp • Rated engine speed: 2,200 rpm • Fuel tank capacity: 110 liters • Hydrostatic drive system • Catalog travel speed: up to 16 km/h • Catalog paving speed: up to 30 m/min Smooth speed control allows the work rate to be adjusted to the supply of the mixture and the conditions on the construction site. Paving, travel, and maneuvering modes facilitate operation during surfacing and machine movement. AS3173 WORKING TABLE — WORKING WIDTH 1.70–3.20 M The mounted Caterpillar AS3173 table allows for hydraulically adjustable paving width in the basic range of 1.70 to 3.20 m. Model expansion options: • Width up to 4.00 m after mounting additional extensions • Width from 0.65 m with an appropriate reduction attachment • Catalog cross-profile adjustment of the table: from -2.5% to +4.5% The AS3173 design includes electric heating of the working plates and a vibration system. The table forms the surface and provides preliminary compaction of the mixture before final compaction with a roller. MIX FEEDING SYSTEM The AP300D model has a front hopper with a catalog capacity of approximately 3.8 m³. The mixture delivered by the truck is transported by conveyors to the rear of the machine and then distributed by screws in front of the working table. Independent control of the conveyors and screws allows the material feed to be adjusted to the working width and rate. The ability to change the direction of their operation facilitates control of the mixture when finishing the working strip. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price.

Condition: excellent (used), Year of construction: 2016, operating hours: 5,397 h, functionality: fully functional, first registration: 12/2016, overall weight: 4,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 2,800 kg, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, electronic stability program (ESP), fog lights, hydraulics, MGC.pl in Łaziska Górne offers for sale a compact JOHNSTON C201 CX road sweeper from 2016, sourced from Sweden and previously owned by a company specializing in maintaining the cleanliness of roads and large facilities. Nwsdjy U Nidopfx Akisn The machine comes from a fleet of over 20 sweepers. According to information from the previous owner, it was regularly serviced. This particular unit stands out due to its excellent condition and equipment, including air conditioning and a reversing camera. Its small size, glazed cabin, and front brush assemblies make the C201 CX well-suited for use in residential areas, sidewalks, parking lots, and tight urban environments. ENGINE AND DRIVE The C201 CX uses a four-cylinder, turbocharged diesel engine with a displacement of 2970 cm³ and a hydrostatic drive. Smooth speed control allows you to adjust the driving speed to the amount of debris and working conditions. The hydrostatic system makes it easy to start, stop, and maneuver frequently while sweeping. The CX version is designed for travel at speeds up to 50 km/h, while the sweeping speed range is 0–16 km/h. SWEEPING SYSTEM AND SCOPE OF WORK Two front brushes sweep debris towards the suction nozzle. The vacuum system transports the collected material to the waste container, and the water system reduces dust during operation. The machine is designed for collecting sand, dust, fine gravel, leaves, and small debris from paved surfaces. Example applications: Regular maintenance of the cleanliness of streets and local roads; Sweeping sidewalks, pedestrian walkways, and paths of appropriate width; Cleaning parking lots, bus stops, and squares; Maintaining residential areas and urban spaces; Cleaning industrial areas and logistics centers; Removing residual sand after winter road maintenance; Servicing commercial facilities and private properties. The compact design makes it easy to work between parked vehicles and in areas with limited maneuvering space. IDENTIFICATION DATA AND WEIGHTS Brand: Johnston Sweepers Model: C201 CX Year of manufacture: 2016 Serial number according to the data provided: 2000 / 207006 / 03 / 16 Maximum permissible total weight: 4000 kg Maximum permissible weight of the assembly: 4750 kg Maximum permissible front axle load: 1970 kg Maximum permissible rear axle load: 2030 kg CE marking PM10 Certified marking Acoustic power level according to the data provided: LWA 103 dB OPERATING PARAMETERS Geometric capacity of the waste container: 1.8 m³ Usable capacity of the container: approximately 1.5 m³ Fuel tank capacity: 52 l Brush diameter: approximately 850 mm Suction nozzle width: approximately 815 mm Unloading height: approximately 1545 mm Theoretical maximum sweeping performance: up to 36,800 m²/h Cataloged maximum climbing ability: up to 30% Actual performance depends on the type of surface, the amount of debris, the working speed, and the brush setting. DIMENSIONS Overall length: approximately 4270 mm Overall width: approximately 1315 mm Overall height: approximately 1985 mm EQUIPMENT Air conditioning Radio Reversing camera Glazed operator cabin Two front brush assemblies Suction system Water system to reduce dust Hydrostatic drive

Condition: used, Year of construction: 1978, Weight 1,5 t serial number 4193 ja vice ja x-travel 500 mm length 1200 mm Nwjdpszxt Tlofx Akisn width 1300 mm height 1789 mm

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Nwjdpfxozz Hk Ns Akion Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: refurbished (used), Year of construction: 2021, operating hours: 4,046 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 377 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Nwedpfez Ii U Iox Akisn Test and get advice on-site now – we will find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 4,046 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 377 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Battery type: PzS Voltage: 24 V Battery weight: 180 kg

Condition: refurbished (used), Year of construction: 2021, operating hours: 1,060 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 381 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical components – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Rigorous technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Nwedpez Ikarjfx Akion Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 1,060 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 381 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Battery type: PzS Voltage: 24 V Battery weight: 150 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2021, operating hours: 1,698 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 381 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Nedpjz Ika Sofx Akiswn Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Rigorous technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 1,698 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 381 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Battery type: PzS Voltage: 24 V Battery weight: 150 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2021, operating hours: 2,847 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 381 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision Nwedpfez Ikcajx Akijn * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 2,847 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 381 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Battery type: PzS Voltage: 24 V Battery weight: 150 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2021, operating hours: 3,979 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 377 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Forklift data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2021 Operating hours: 3,979 Lifting height: 750 mm Mast type: None Initial lift: Yes Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 377 kg Load center: 575 mm Tires: Polyurethane Model type: EJE C20 Voltage: 24 V Battery weight: 180 kg Nsdsz Ikctjpfx Akijwn

Condition: refurbished (used), Year of construction: 2015, operating hours: 2,552 h, load capacity: 1,600 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 305 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision Nsdpfx Akoz Ikdwjiswn * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE 116 Drive type: Electric Load capacity: 1,600 kg Year of manufacture: 2015 Operating hours: 2,552 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 305 kg Load center: 600 mm Tires: Polyurethane Model type: EJE 116 Battery type: PzS Voltage: 24 V Battery weight: 160 kg Charger: Charger integrated

Condition: refurbished (used), Year of construction: 2018, operating hours: 9,639 h, load capacity: 2,000 kg, lifting height: 122 mm, load center: 1,200 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 25.6 V, fork length: 2,400 mm, empty load weight: 666 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically reconditioned according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Njdpfxsz Ikfue Akijwn Type: Low lift pallet truck ERE 120 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2018 Operating hours: 9,639 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 2,400 mm Unladen weight: 666 kg Load center: 1,200 mm Tires: Polyurethane Model type: ERE 120 Battery type: Lithium-ion Voltage: 25.6 V Battery weight: 310 kg