Used Upper Carriage for sale (5,042)

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: VDF Boehringer Type: V800 Year of manufacture: 1974 Machine type: Lead and draw spindle lathe WORKING AREA Turning length: approx. 1,200 mm Center height above bed: 430 mm Turning diameter above bed: 660 mm Center height above carriage: 260 mm Turning diameter above carriage: 520 mm SPINDLE Spindle speed: 7.1–1,400 min⁻¹ Spindle bore: approx. 140 mm MACHINE DETAILS Dimensions (L × W × H): 4,000 × 2,000 × 1,800 mm Weight: 5,000 kg EQUIPMENT Gedpfx Aco Ad Hgtsmokd Multifix tool holder 3-jaw chuck, diameter 600 mm

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Swing diameter: 225 mm Turning length: 1,000 mm Diameter over carriage: 1,000 mm Feed rate, continuously variable: 9–400 mm/min Feed rate, continuously variable: 4.5–200 mm/min Travel of steady rest: 360 mm Travel of upper steady rest: 220 mm Tailstock diameter: 60 mm Tailstock travel: 170 mm Tailstock adjustment: ± 20 mm Spindle speed: 225–2,000 min⁻¹ MACHINE DETAILS Manufacturer: Zimmermann Type: DZUE 1000 Year of manufacture: 1990 Machine length: 2,500 mm Gksdpfxs Ad Ezcs Acmed Machine width: 1,000 mm Machine height: 1,600 mm Machine weight: 1,000 kg

Condition: used, Year of construction: 1972, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: PBR Type: TM 450/2000 Machine Type: Precision draw and feed spindle lathe Machine Weight: approx. 7.9 t Working Area Turning diameter over bed: 980 mm Turning diameter over carriage: 600 mm Turning length: 2,200 mm Turning diameter in the pit: 1,200 mm Pit length: 450 mm Spindle Spindle bore: 150 mm Speed stages: 24 Speed range: 8–800 rpm Axes and Travels X-axis: 2,000 mm X²-axis: 350 mm Y-axis: 500 mm Feeds Feed stages: 108 Longitudinal feed: 0.032–15.2 mm/rev Cross feed: 0.016–7.6 mm/rev Godj Aa Azlepfx Acmjkd Thread Cutting Number of thread pitches: 398 Metric thread pitch: 0.5–224 mm Metric thread pitch: 0.25–112 mm Imperial thread pitch: 56–1/8 TPI Diametral Pitch: 112–1/4 D.P. Tailstock Arbor support: MK 6 Arbor travel: 380 mm Electrical Data Voltage: 380 V Frequency: 50 Hz Total power requirement: 25 hp Dimensions Footprint: approx. 4.4 × 1.8 × 1.7 m EQUIPMENT Original Forkardt 3-jaw chuck, 500 mm Hardened and ground bed guides Rapid traverse for longitudinal and cross feeds Spindle brake Original Sauter hydraulics with external oil supply Original Ideal tool holder Faceplate with 4 independent jaws Coolant system Magnetic clutch Automatic longitudinal stops Cross stop Thread dial Reducing sleeve 2 fixed centers Fixed steady rest Swiveling Staudacher spindle guard with safety switch 2 emergency stop buttons Main switch Chip collector Workpiece lighting Machine-mounted control cabinet

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X393U01640, Year of construction: 2007, operating hours: 20,229 h, load capacity: 3,000 kg, lifting height: 4,824 mm, free lift: 1,430 mm, mast type: duplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 4,824 mm Free lift: 1,430 mm Fork length: 100 mm Fork width: min. 250 mm Fork width: max. 1,150 mm MACHINE DETAILS Mast type: Duplex Gkedpfx Acs Aidwwjmod Fuel type: Diesel Number of wheels: 4 Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,230 x 2,210 mm Overhead height: 2,215 mm Unladen weight: 4,810 kg Operating hours: 20,229 h EQUIPMENT Documentation CE marking Duplex mast Free lift 3rd and 4th hydraulic valve for the fork carriage

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 6,000 kg, controller model: Xilog Plus, working width: 1,300 mm, spindle speed (max.): 24,000 rpm, working height: 80 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area X: 3,000 mm Working area Y: 1,300 mm Working area Z: 80 mm Independent CNC drilling heads: 2 units Main drilling head Vertical spindles X: 15 units Vertical spindles Y: 19 units Horizontal spindles X: 4 units Auxiliary drilling head Vertical spindles X: 11 units Vertical spindles Y: 3 units Horizontal spindles X: 4 units Upper milling unit Milling power: 6.6 kW Tool holder: HSK-F63 Speed: 24,000 rpm Lower milling unit Milling power: 6.6 kW Tool holder: HSK-F63 Speed: 24,000 rpm MACHINE DETAILS CNC control: Xilog Plus EQUIPMENT Additional horizontal spindles Integrated drilling heads for concealed hinge systems DXF import Parametric programming Tool management Automatic workpiece thickness measurement Gkede Ah Rk Nopfx Acmjd Patented CNC workpiece clamping system Automatic workpiece repositioning Automatic central lubrication Loading and unloading table

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN408628, Year of construction: 2010, operating hours: 14,247 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 2,040 mm, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 6,000 mm Free lift: 2,040 mm Headroom: 2,650 mm Lifting capacity: 2,500 kg Fork length: 1,190 mm Fork width: min. 330 mm Fork width: max. 980 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery type: 5 PzS 775 Battery year of manufacture: 2018 Battery capacity: 775 Ah Battery voltage: 80 V Carriage length: 1,025 mm Gkodps Aidxbefx Acmod Carriage width: 850 mm Number of wheels: 4 Dimensions & Weight Dimensions (L x W x H): 3,590 x 1,190 x 2,660 mm Unladen weight: 5,553 kg Operating hours: 14,247 h EQUIPMENT Side shift Fork adjustment CE marking Documentation

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Gsdpfxe Ad Di Ej Acmjkd Rotational speeds Speed range: 25–2,000 min⁻¹ Working area Distance between centers: approx. 700 mm Distance between centers above the bed: 170 mm Turning diameter above the bed: 340 mm Distance between centers above the carriage: 120 mm Turning diameter above the carriage: 240 mm Spindle bore: 48 mm Electrical data Operating voltage: 380 V Frequency: 50 Hz Connected power: 4.8 kW MACHINE DETAILS Manufacturer: Nardini Type: MS 175E Machine number: Machine length: 1,700 mm Machine width: 800 mm Machine height: 1,600 mm Machine weight: 700 kg EQUIPMENT 3-axis digital display Fagor

Condition: used, machine/vehicle number: FN615011, Year of construction: 2020, operating hours: 6,090 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 3,800 mm Fork length: 2,000 mm Fork carriage width: 2,200 mm MACHINE DETAILS Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,250 x 1,900 x 2,800 mm Own weight: 7,290 kg Operating hours: 6,090 h EQUIPMENT Previously a Jungheinrich full-service unit Hydraulic valves: 3rd and 4th valve Dual tires on the front Comfort seat Fork carriage with side shift All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Gkode Ahwf Rspfx Acmsd Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 51

Condition: used, machine/vehicle number: 3045, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: Matra Model: MD40 Machine Type: Pull and lead spindle lathe Machine Weight: approx. 4.8 t Working Area Turning diameter over bed: 870 mm Turning diameter over carriage: 520 mm Turning length: 2,100 mm Turning diameter in the pit: 1,080 mm Pit length: 430 mm Spindle Speed stages: 24 Speed range: 8–1,000 rpm Spindle bore: 103 mm Godpfxj Aa Az Ss Acmekd Slides and Travels X-axis: 1,830 mm X²-axis: 160 mm Y-axis: 415 mm Compound slide travel: 450 mm Top slide travel: 160 mm Feeds Longitudinal feed stages: 104 Longitudinal feed: 0.1–61.6 mm/rev Longitudinal feed: 0.0038–2 19/64 in/rev Cross feed stages: 104 Cross slide feed: 0.3–18.4 mm/rev Cross feed: 0.0012–47/64 in/rev Rapid traverse longitudinal: 5,140 mm/min Rapid traverse cross: 2,570 mm/min Thread Cutting Thread pitches: 72 Metric thread pitch: 0.5–240 mm Inch thread: 60–1/8 threads/inch Module thread: 0.125–60 mm Tailstock Tailstock cross travel from center: 10 mm Arbor mount: MK 6 Arbor stroke: 280 mm Electrical Data Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Rated current: 30 A Fuse rating: 50 A Total power consumption: 13 kW Dimensions Footprint: approx. 4.1 × 1.5 × 1.9 m EQUIPMENT Original Forkardt F400 3-jaw chuck Removable bridge Original MiniWizard 2-axis digital display 3 glass scales Multifix quick-change tool holder Swiveling spindle guard with safety switch 2 safety emergency stop buttons Lockable main switch Important note: The machine vises and the steady rest visible in the pictures are not included in the scope of sale and delivery!

Condition: used, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 100 t Machine weight: approx. 5.7 t Stroke and operating data Stroke: 0–500 mm Overhang: 310 mm Installation height: 1,130 mm The installation height is specified with the stroke in the upper position. Table and ram Table surface: 800 × 650 mm Ram surface: 800 × 600 mm Through-hole in the table: 355 mm Table height above the floor: 800 mm Safety data Safety distance: 270 mm Follow-up measurement: 135 m/s Follow-up travel: 44 mm Dimensions Length: approx. 1.2 m Width: approx. 2.0 m Height: approx. 3.67 m Gjdpfj Acgcfox Acmekd EQUIPMENT Conversion to comply with new safety regulations

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Gksdo Ad E Suspfx Acmjd TECHNICAL DETAILS Turning data Turning length: approx. 700 mm Center height above bed: 160 mm Turning diameter above bed: 320 mm Center height above carriage: 100 mm Turning diameter above carriage: 200 mm Spindle bore: approx. 36 mm MACHINE DETAILS Manufacturer: Hahn und Kolb Machine type: Lead screw and feed screw lathe Length: 1,800 mm Width: 500 mm Height: 1,500 mm Weight: 1,000 kg

Year of construction: 2014, condition: refurbished (used), functionality: fully functional, UHM120_H_T TANDEM BAND SAW Diameter of Wheels Ø 1200 mm Width of Wheels 140 mm Max. Cutting Height 1090 mm Max. Cutting Width 620 mm Upper Wheel Tilting 2×0.37 kW Movement of the Tandem 0.75 kW Hydraulic Unit Motor 2.2 kW Main Motor 2×45 kW - 1450 rpm Weight without Motor ~9000 kg - Capability to saw two timbers in one pass by tandem lined two band saws - Timber thickness is adjusted by two axes control system on band saw and log carriage system UTA_Z4 HYDRAULIC LOG CARRIAGE Max opening of headblocks :1000 mm Max opening of hooks : 1070 mm Forwarding speed :160 m/min Speed of headblocks :320 mm/sec Hydraulic unit of forwarding :22 kW Godpeu Rmqiefx Acmokd Headblocks : 4 pcs Width of rails : 1220 mm - Fixed fence-horizontol movable hooks. The distance between fence and hooks can be adjusted to desired position min: 35 mm- max: 145 m - Independent horizontal move hooks, log is able to be easily aligned according to to cut axis while clamped and is able to be adjusted to a fix distance of the hook and the fence -min:15mm - max:145mm - Two sets of joysticks with six buttons each to control head blocks, hooks and turning arms and 1 set of hydraulic pedal for carriage forward backward movement Conveyors 1. 14 mt longitudinal log conveyor 2. 6 mt Trasnversal Log Decking 3. 7 mt Longitudinal Timber Conveyor

Condition: used, Year of construction: 2007, used to produce innerliners Equipment Specifications Summary Forming and Tool Dimensions Maximum frame inner size: 2005 × 905 mm Gedpfxozumt Ds Acmskd Maximum tool base size: 2000 × 900 mm Minimum tool base size: 700 × 500 mm Maximum sheet size: 2090 × 960 mm Minimum sheet size: 790 × 560 mm Maximum tool height: 800 mm (550 + 250 mm) Maximum formed workpiece height: 550 mm Maximum sheet stack height: 1000 mm Maximum pallet height: 180 mm Heating System Upper heating power: 83.3 kW Lower heating power: 71.3 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Drive Motors & Auxiliary Equipment Oil pump motor power: 19 kW Vacuum pump motor power: 23.4 kW Sheet centering motors power: 0.24 kW Sheet feed motor power: 2.2 kW Sheet feed width-adjustment motor power: 2.2 kW Sheet picker motor power: 0.37 kW Fan motor power: 5.5 kW Shear motor power: 2.2 kW Carriage motor power: 2.2 kW Rotary table motor power: 1.1 kW Scrap cutter motor power: 3.0 kW Scrap conveyor motor power: 0.37 kW Finished workpiece discharge belt motor power: 0.75 kW Cross-cutting motor power: 0.25 kW Cross-cut scrap conveyor motor power: 0.22 kW Transfer unit motor power: 1.5 kW Auxiliary units maximum consumption: 5.1 kW Tempering unit power: 52 kW Electrical Requirements Maximum installed power: 375 kW Power consumption at 70% load: 262.5 kW Vacuum System Vacuum pumps capacity: 750 m³/h (250 × 3) Tool vacuum tank capacity: 2,000 L Bell vacuum tank capacity: 2,000 L Hydraulic System Required oil quantity: 600 L Hydraulic operating pressure: 10 MPa Maximum hydraulic operating pressure: 18 MPa Pneumatic System Required air pressure: 600 kPa Compressed air consumption: 1,300 N liters/cycle Cooling Water Requirements Incoming water pressure: 200-300 kPa Incoming water temperature: 12-20 °C Outgoing water temperature: 30-35 °C Mechanical Characteristics Lower tool holder force: 9,000 kg Machine weight: 35,000 kg (35 tonnes) Key Utility Requirements Electrical Supply: 375 kW installed load Compressed Air: 600 kPa, 1,300 N liters/cycle Cooling Water: 200-300 kPa at 12-20 °C Hydraulic Oil Capacity: 600 liters Vacuum Capacity: 750 m³/h with two 2,000-liter vacuum tanks Fully automatic thermoforming machine designed to shape plastic sheets suitable for high-capacity industrial applications. Thermoformer details: Forming area 2005mm x 905mm Max forming depth 550mm 3x loading stations. 1 x heating station. (pre-heating, final heating, upper and lower elements) - ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial grade build with multiple access doors, observation windows, and integrated ventilation heat management. Year of manufacture 2007.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate Gsdpfx Ajzt Nbzscmekd - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain Gedpfx Aeyxhq Uocmjkd - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1990, Equipment: ABS, all wheel drive, SPIERINGS Lattice Boom Tower Crane / Truck Crane Truck: ? Engine power: 222 kW / 305 hp / Displacement: 8,250 cm³ ? Vehicle dimensions: 12,395 x 2,600 x 4,000 mm ? Operating weight: 35,000 kg ? GVW: 36,000 kg including 7,080 kg ballast weight ? Tires: 445/65 R22.5 ? 3 axles ? 1st and 3rd axles steered ? All-round warning lights Crane: ? Max. outreach: 30.4 m ? Max. lifting capacity: 5,000 kg at 9.3 m outreach ? Drive type: hydraulic, hydraulic pumps electrically driven by external power or generator ? Control type: electrically actuated proportional and control valves ? Max. corner load: 204 kN ? V/max: 85 km/h ? Can only be moved by the undercarriage! Hoisting winch: ? Motor: hydraulic variable motor ? Drive group: 1Am ? Displacement: 20..55 cm³ ? Max. feed pressure: 260 bar ? Gearbox: planetary gearbox, i=27 ? Drum diameter: 375 mm ? Max. rope pull force: 25 kN ? Corresponding rope speed: 30 m/min ? Holding brake: spring-loaded disc brake Trolley: ? Motor: hydraulic constant motor ? Drive group: 1Am ? Displacement: 16 cm³ ? Max. feed pressure: 265 bar ? Gearbox: planetary gearbox, i=10.4 ? Drum diameter: 200 mm ? Max. rope pull force: 6 kN ? Max. speed: 50 m/min ? With limit switch ? Holding brake: spring-loaded disc brake Slewing unit: ? Motor: hydraulic constant motor ? Displacement: 16 cm³ ? Max. feed pressure: 300 bar ? Gearbox: planetary gearbox, i=160 ? Max. slewing speed of the upper carriage: 1.3 rpm ? Swing brake: hydraulic brake valve ? Holding brake: spring-loaded disc brake Boom luffing winch: ? Drive group: 1Em ? Motor: hydraulic constant motor ? Displacement: 16 cm³ ? Max. feed pressure: 220 bar ? Gearbox: planetary gearbox, i=92 ? Drum diameter: 200 mm ? Max. rope pull force: 38 kN ? Max. speed: 18 m/min ? Holding brake: spring-loaded disc brake ? With limit switch Gksdpfx Ao Ahp Rbjcmod Load / Load moment limiter: ? Pressure switch on the hoisting winch motor ? Mechanical switch actuated by bending of the tower slewing frame Tower: ? Working height: 20.8 m ? Outer tower: length 9.9 m, inner tower: 11 m Boom: ? Jib boom in lattice structure, optionally horizontal or at a 30° incline ? 1st boom section: length 11 m / 2nd boom section: 11.1 m / 3rd boom section 7.8 m - German machine! - Ready for operation! Errors and prior sale excepted!

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: DN1771/1789/1791, 1x Abus VS column-mounted slewing crane, capacity 500 KG There are 3 identical cranes available. Load capacity at full outreach: 500 KG / 0.5 tons Height: approx. 3.6m Upper carriage outreach: approx. 3.42m Outreach: approx. 2.5m Hook height: approx. 3m Total weight: approx. 350 Kg Includes Abus chain hoist with floor control (2 lifting speeds) with slewing and trolley drive Gksdpfxezv Hy Te Acmjd Connection to 400V 16A, slewing range 360° Crane is disassembled and immediately available. The gripper is not included! Item location is 75053 Gondelsheim. Only the crane system shown in the pictures is being sold. Very good condition, see pictures. Shipping via freight forwarder or collection by arrangement.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DN2383 / 2368, 1 Schmalz Column Swivel Crane 2 cranes available! Height 4.8m, length 3m, upper carriage boom 4m, hook height 3.6m Load capacity at full extension 350 kg Total weight approx. 500 kg including anchor plate 75x75 cm with 500 kg Schmalz chain hoist with floor control (with 2 lifting speeds) Connection to 400V 16A, swivel range approx. 270° Crane is disassembled and packed on a pallet Gkjdpfxezvuldo Acmod Very good condition, almost new. See pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection by appointment

Condition: used, Year of construction: 2011, • Cutting length: 4,200 mm Gjdpozkkf Asfx Acmekd • Motor: 11 kW (15 HP) • High cutting precision thanks to the free-standing, torsion-resistant steel frame and carriage guidance running on oversized, hardened and ground round steel rails. • Infinitely variable feed speed controlled by foot pedal over the entire cutting length. • Feed speed: 1–80 m/min • Saw spindle speed: 2,900 rpm • Maximum cutting height with Ø 600 mm saw blade: 190 mm • Maximum cutting height with Ø 400 mm saw blade: 90 mm • Rip fence and machine table. • Rip fence adjustment via multiple control levers on the front of the machine for precise positioning, with a large digital readout. The fence can be easily rotated and tilted. • Rip fence adjustment range up to 800 mm. • Control system o Electronic machine and fence control (PLC control) with an easy-to-read touchscreen. • Swivel-mounted control panel on a swing arm. • One 30 mW red laser for displaying the cutting line. • Fast and safe saw blade change using the "Easyfix" quick-clamping system. • Safety guard with automatic opening assisted by two gas springs. • One carbide-tipped saw blade: 450 × 4.4 × 80 mm, Z=40 teeth. • Saw blade bore diameter: Ø 80 mm. • Electrical equipment o Control cabinet integrated into the machine frame. • Connection data o Upper right extraction port: Ø 160 mm o Lower left extraction port: Ø 160 mm o Extraction air velocity: 30 m/s o Total air requirement: 4,340 m³/h o Compressed air supply: 6–8 bar • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: HZ379, 1 Vetter US1.25-4.9 Column-swivel crane, NL 125 KG Load capacity at full extension: 125 KG / 0.125 tons Height: approx. 4.4 m, upper carriage boom: approx. 3.62 m Reach: approx. 4.9 m, hook height: approx. 3.2 m Base plate: 55 cm Total weight: approx. 400 kg Including 125 kg Demag DC chain hoist (2 lifting speeds) Gedpfx Acoy Udp Eomekd Connection to 400V 16A, swivel range: 360° Crane is disassembled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost like new, see pictures Shipping via freight forwarder or collection by appointment

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg Gsdpfx Acjv Tv Tnemjkd

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, working width: 2,500 mm, welding power (max.): 500 kVA, wire diameter (max.): 10 mm, type of input current: three-phase, mesh size: 25,002,500 mm, continuous power (apparent): 500 kVA, The VARO SARG-2500 is an automatic line designed for the production of welded wire mesh for fencing applications, equipped with medium-frequency welding technology. The machine is designed to process mesh panels up to 2,500 x 2,500 mm, using longitudinal and cross wires with diameters ranging from 3.0 to 8.0 mm. The minimum adjustable pitch is 30 mm for longitudinal wires and 10 mm for cross wires. The welding system consists of 12 welding heads with double-stage pneumatic cylinders and 2 TECNA 250 kVA welding transformers, controlled by inverters. The production speed specified in the technical documentation is 70–90 welds/min. The line includes automatic loading of the longitudinal wires, an electronically controlled pushing system for feeding the wires into the welding station, and an automatic system for loading the upper cross wires. Mesh advancement is electronically controlled by a brushless motor, with adjustable mechanical grippers. After welding, an electronically controlled carriage transfers the mesh to the next processing stage. The system is equipped with two hydraulic side trimming units for cutting the protruding wire ends. The line also includes a bending station with an hydraulic press, needed for the 3D panels. After bending, the finished mesh is automatically transferred to the unloading station and deposited onto a supporting table or pallet. Machine operation is managed through a dedicated electrical control cabinet with Siemens S7 PLC, PC and operator panel for setting and controlling the production cycle parameters. Main Technical Specifications • Manufacturer: VARO • Model: SARG-2500 • Maximum mesh size: 2,500 x 2,500 mm • Longitudinal wire diameter: 3.0–8.0 mm • Cross wire diameter: 3.0–8.0 mm • Minimum longitudinal wire pitch: 25 mm, adjustable • Minimum cross wire pitch: 10 mm, adjustable • Number of welding heads: 12 • Welding transformers: 2 x TECNA 250 kVA three phases • Welding speed: 70–90 welds/min Gsdpfxe Ahnkdo Acmokd • Power supply: 400 V / 50 Hz • Hydraulic bending press: yes • Control system: Siemens S7 PLC + PC • Cross wire loading: Upper and lower • Side trimming: 2 hydraulic trimming units • Mesh feeding: Electronically controlled, brushless motor - optional: double wire automatic system installation

Condition: excellent (used), CATALOGUE NUMBER: 6969 TECHNICAL DATA Circular saw: - max. saw blade diameter 300mm - spindle 30mm - max. cutting height 60mm - blade adjustable front/rear - motor 2.4kW Milling machine: Arbor: - spindle diameter 40mm - spindle working height 190mm Godpfxszw Dgmo Acmekd - spindle locking - max. milling cutter diameter 360mm - motor 7.5kW - 2 types of rotation speeds - material clamping - side carriage adjustable up/down, front/rear - angle guide - retractable support from the table - manual carriage feed - dust extraction nozzle diameter 80mm, 160mm - dimensions L/W/H 1910x1960x1800mm, - weight 830kg – Polish production – DTR documentation – upper control panel – used milling machine, very good condition Net price: 13900 PLN Net price: 3233 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Tool holder: Ø 32 mm -Dimensions: see photos -Dimensions: 460/190/H205 mm Gedowcwndspfx Acmokd -Weight: 21.6 kg

Condition: used, Year of construction: 2011, functionality: fully functional, power: 56 kW (76.14 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total height: 1,800 mm, total length: 4,800 mm, total width: 2,150 mm, Equipment: documentation/manual, Artiglio carriage with a Artiglio headrig for sale. Carriage is equipped with 3 Independent knees, positioning done by servo motors. Program for cutting and manual dimension setup done through a touch display for ease of use. Carriage forward and reverse movement controlled by pedals, carriage is driven by an on board hydro motor. Turning, clamping and manual knee positioning done with joysticks. Gkodpfx Acey Anp Eemjd Cables and hydraulic hoses are ran to carriage through a pantograph. Schematics and user manuals in digital and printed format. Carriage and headrig have been removed, cleaned and some restoration work done after removal. Condition wise everything is fully functional just visual wear. Currently packed, stored in a warehouse and ready for shipping. Carriage: Model - NIBBIO 1000 Length - 4.8 m Width - 2.15 m Height - 1.8 m Longitudinal speed - 0-130 m/min Maximum side opening - 1000 mm Upper jaw opening - 800 mm Distance between wheels - 1260 mm Tow rope type - S10AR Towing rope diameter - 14 mm Overall length of towing ropes - 41 m Central tank capacity. Hydraulics - 120 l Longitudinal drive - 20 HP ONBOARD HYDROSTATIC Year - 2011 Headrig: Model - ST/I 130 Main motor power - 56 Kw Total weight - 4750 kg Flywheel diameter - 1300 mm Year - 2011