Used Upper Carriage for sale (4,844)

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Rotatable Telehandler Mast Type: Telescopic Technical Condition: New Front Tires Type: Pneumatic Redpow Eqdwofx Acvor Front Tires Condition: 80 - 100% Rear Tires Type: Pneumatic Rear Tires Condition: 80 - 100% Description: The vehicle is UVV-tested. A&M pallet fork carrier set includes 1200mm pallet forks, 1500mm pallet fork carrier plate, and 5t load hook. 3rd valve, 4th valve, heating, STVZO (German Road Traffic Licensing Regulations), full cab, CE certificate, PEGASUS 60.30 St.V TÜV/Dekra approval, 20 km/h axles for construction machines with automatic 45% differential lock on the second axle, additional platforms for outriggers, pair of LED headlights on the rigid boom, 7-pin socket on the upper carriage, car radio pre-installation kit with antenna and speakers, standard tool carrier plates, mechanically suspended Grammer seat with double joystick, right joystick with integrated front-wheel drive and electrical pre-installation for 3-motion equipment, wheel set with 18R22.5XF MICHELIN off-road tires, semi-automatic air conditioning, removable windshield protection for the cab, kit for driving with 180° upper carriage rotation, boom vibration damping, integrated rear view camera with 7-display (not compatible with 7-monitor with digital camera on the telescopic boom). Telematics kit (DTS) Road lights (front) with LED daytime running lights Cabin with laminated glass windscreen, pre-installation for saw Woodcracker Three-sided personnel basket 120x240cm, hydraulically extendable to 420 cm. Load capacity 300 kg Pallet fork carrier plate including load hook A&M, width 1, chain forks FEM4A, tines: 150x50, length 1.2 m, load capacity

Condition: used, Year of construction: 2022, load capacity: 200 kg, construction height: 1,999 mm, drive type: Elektro, working height: 11,200 mm, Vertical lift Technical condition: New Redpfxjumy A Nj Acvjr Description: The vehicle is UVV tested. The machine is serviced and cleaned before delivery. Max. Number of persons (inside/outside): 2 Working height: 11.20 m Max. horizontal reach: 3 m Max. Climbing ability (stowed): 25% Max. horizontal outreach: 7.89 m Max. permissible inclination: 2.5° Overall length: 2.72 m Platform length: 0.62 m Overall width: 1 m Platform width (tires): 0.87 m Overall height: 1.99 m Platform height: 9.20 m Wheelbase: 1.22 m Ground clearance (stowed): 0.06 m Ground clearance (raised): 0.02 cm Turning radius (inside): 0.23 m Turning radius (outside): 1.65 m Upper carriage turning range: 345° Jib movement: +70°/-60° Travel drive: 24 V / 1.5 kW Lift drive: 24 V / 3 kW Up/down speed: 95/50 sec Total weight: 2,950 kg Integrated charger: 24 V / 30 A Travel speed (retracted): 4.50 km/h Travel speed (extended): 0.50 km/h Tires: 381x127 Battery: 24 V / 240 Ah Transmission: electric drive

Condition: new, F 45 ProDrive:The new F 45 is a masterpiece of technology and design. The machine stand, which has been redesigned from the ground up, exceeds all previous values in terms of torsional rigidity and low eye-level control, with which you can call up the height and tiltof the saw blade plus, depending on the control package selected, the speed andother functions.3.5" color screen with separate keyboardAutom. Automatic dimensional correction at the parallel and angle stop when swivelling the saw unitSimple calibration of the axesMachine diagnostics, operating hours counter, USB interfaceCalling up the last dimension entry (back function)99 storable cutting programsGrooving: with automatic step-by-step positioning of therip fence400V / 50Hz - Europe , scale: scale in mmM44249machine height 910 mmM64099eye-level operationbasic equipmentThe control panel of the F 45 is mounted at eye level. This means that all axes can be conveniently controlled and all settings are in -hand operation of the swing-away deviceM64096max. blade diameter 450 mmBasic equipmentThe F 45 is equipped with a parallelogram guardwith two hoods for 90° and angle cuts.{They are infinitely adjustable in large pressure roller in the infeed automatically adjusts theguard to the workpiece maximum saw blade diameter is 450 mm. This achieves a saw blade projection of max. 154 mm.M511005.5 kW (7.5 hp)optionalone-sided swivel saw unit with 5.5 kW (7.5 hp) motor,manuallyadjustable to 3/4/5000 rpm. Swivel range: 0 - 46°AKE quick-change system for the main saw bladeThe motors have 20% more torque than standard electric motors with the samepower consumption.M24038Preparation for 2-axis scoring unitOptionScoring unit preparationfor retrofitting a scoring unitM41010Table top extension 840 mmBasic equipmentTable top extension 840 mmconsisting of a CDF panel with HPL coating on both sides. Itis particularly scratch and impact resistant.M34204Double castor trolley with trolley length 3200 mmOptionDouble castor trolley, trolley length 3200 mmThe Altendorf double castor trolley can be locked in any position. Thedouble castors, made of hardened steel, holdthe upper carriage in conjunction with the lower carriage absolutely precisely in thehard chrome-plated guide rods. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-hollow chamber system. The table surface is anodized.A hard chrome-plated round bar serves as a mount for the cross slide and as an interface for various accessories.M44404Angle mitre fenceOptionAngle mitre fence, cutting to length up to 3500 mmThis Altendorf-patented fence with integratedlength compensation facilitates the precise cutting of 90° angles andmitres in one function. In the front and rearstop position, the swivel angle is infinitely adjustable by 49° andis indicated by a measuring scale. Simply move the fence ruler to theselected angle dimension according to the scale and then set the desired lengthon the fence cut-to-length dimensions from approx. 1700 mm, theroller-supported and stable telescopic extension takes over the outer fence entire cross slide is supported by a precision-manufactured,prismatic support of the round bar of thedouble roller carriageIncluding: two single tilt stopsM44441CNC parallel fence 1000 mmOptionCNC parallel fence, cutting width 1000 mmThe CNC-controlled parallel fence can be controlled at a traversing speedo... Rodpfx Aevzhdzecvjr

Condition: new, - Electric motor height and swivel adjustment 0 - 46° for the main saw blade - Digital swivel angle display - Saw blade projection max. 150 mm, saw blade diameter max. 450 mm - Double roller carriage, carriage length 3000 mm including stepless upper carriage lock - Parallel stop manual adjustment, adjustable via measuring scale, including fine adjustment, cutting width 1000 mm - Angle stop with fixed 90° position, manually adjustable via measuring scale up to 3200 mm - Drive motor 4 kW (5.5 HP) with 1 speed 4000 rpm - Tool clamping system AKE for the main saw blade Item no. M19308 - including surcharge for motor 5.5 kW (7.5 HP), 3 speeds Rjdpfxevyurij Acvor

Condition: used, functionality: fully functional, machine/vehicle number: 34104, mileage: 21,490 km, power: 290 kW (394.29 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 33 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power assisted steering, power mirror, tachograph, traction control, truck registration, The mileage of the vehicles on offer may vary, as some units are currently in rental use! Further comparable vehicles available upon request. M2Q engine: OM470, inline 6-cylinder, G2B transmission G 211-12/14, steered trailing axle, 290 l fuel tank, 60 l AdBlue, front underrun protection, ABS, ASR, ESP, lane keeping assist, attention assist, Active Brake Assist 5, cruise control, tyres: 1st axle 385/55 R22.5, 2nd and 3rd axles 315/70 R22.5. MirrorCam, comfort driver’s air suspension seat, functional co-driver’s seat, multimedia cockpit, navigation system, digital radio, air conditioning. Rear section: "L-Kelpie" net loading volume 33 m³; net hopper volume: 9.6 m³; packing plate with floor scraper; hydraulic folding cab protection roof; GRP driver’s cab roof guard; follower panel with inverted cab protection cover; third hatch as wind deflector, Sulo lid opener; quiet, low-wear rotary vane pump; ergonomic control panel, all loading functions operated with a single control lever (joystick) and operator guidance via colour display; discharge function operable from the cab; self-diagnosis system with plain text display; fork carriage, adjustable on both sides (adjustment range 1,280mm-1,890mm) with integrated 1.1 mount (bins to EN 840-2/3); LED arm position marker lights, no turn signal; 2 arm guide rollers in tipping position; 1x LED rotating beacon on the upper rear; 1x LED work light at charging hopper; 1x LED work light behind the cab; 2x LED gooseneck lamps, lower marker lights; 2x LED upper marker lights; 1x LED rotating beacon rear lower right; 2x LED strobe lights front under the protective cover; 2x LED work lights at the front; LED surround lighting with 15 km/h automatic shutoff; 2x LED reverse lights on both sides, linked to reverse gear; central lubrication system incl. electric pump; camera system—front camera, rear area monitoring, and roof camera for the hopper; radio remote control with positional binding; engine speed adjustment via remote control; contour marking; holders for shovel and broom; aluminium ladder with climb limiter; 2x class A markings; MOBA fork scale. Rsdeyc Scnopfx Acvsr

Condition: used, functionality: fully functional, machine/vehicle number: 34103, mileage: 28,900 km, power: 290 kW (394.29 HP), first registration: 09/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 33 m³, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, power mirror, tachograph, traction control, truck registration, The mileage of the vehicles on offer may vary, as some units are currently in rental use! Further comparable vehicles available upon request. Rodpsyc R U Nsfx Acvjr M2Q engine: OM470, inline 6-cylinder, G2B transmission G 211-12/14, steered trailing axle, 290 l fuel tank, 60 l AdBlue, front underrun protection, ABS, ASR, ESP, lane keeping assist, attention assist, Active Brake Assist 5, cruise control, tyres: 1st axle 385/55 R22.5, 2nd and 3rd axles 315/70 R22.5. MirrorCam, comfort driver’s air suspension seat, functional co-driver’s seat, multimedia cockpit, navigation system, digital radio, air conditioning. Rear section: "L-Kelpie" net loading volume 33 m³; net hopper volume: 9.6 m³; packing plate with floor scraper; hydraulic folding cab protection roof; GRP driver’s cab roof guard; follower panel with inverted cab protection cover; third hatch as wind deflector, Sulo lid opener; quiet, low-wear rotary vane pump; ergonomic control panel, all loading functions operated with a single control lever (joystick) and operator guidance via colour display; discharge function operable from the cab; self-diagnosis system with plain text display; fork carriage, adjustable on both sides (adjustment range 1,280mm-1,890mm) with integrated 1.1 mount (bins to EN 840-2/3); LED arm position marker lights, no turn signal; 2 arm guide rollers in tipping position; 1x LED rotating beacon on the upper rear; 1x LED work light at charging hopper; 1x LED work light behind the cab; 2x LED gooseneck lamps, lower marker lights; 2x LED upper marker lights; 1x LED rotating beacon rear lower right; 2x LED strobe lights front under the protective cover; 2x LED work lights at the front; LED surround lighting with 15 km/h automatic shutoff; 2x LED reverse lights on both sides, linked to reverse gear; central lubrication system incl. electric pump; camera system—front camera, rear area monitoring, and roof camera for the hopper; radio remote control with positional binding; engine speed adjustment via remote control; contour marking; holders for shovel and broom; aluminium ladder with climb limiter; 2x class A markings; MOBA fork scale.

Condition: good (used), Year of construction: 1999, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: Switzerland Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5,000 kg TECHNICAL SPECIFICATIONS CNC control: Fanuc 18TB Intermediate Section Fixed intermediate section: grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° to (+100°) Spindle speed (continuous): 6 – 600 rpm Internal taper: MT5 Reducing sleeve: MT5/MT4 Short external taper fitting: DIN 55026 / Size 5 Permissible torque: 160 Nm Guaranteed roundness for chuck work Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper fitting: MT4 Quill stroke: 50 mm / 2° Option: fine adjustment with correction (Ø +/- 150 µm) Grinding wheel data (max. speed) Diameter 300: 27 m/s Diameter 400: 35 m/s Diameter 500: 45 m/s UR Grinding Head Power: 9.2 kW / 12.5 HP Wheel mounting, left max.: Ø 500 x 80 mm Right, additional max.: Ø 400 x 63 mm Internal grinding device: spindle HJN 828 Lower table (Z axis) Distance between centers: 1000 mm Max. travel: 1150 mm Max. speed: 15 m/min Max. resolution: 0.1 µm Upper table Distance between centers: 1000 mm / swivel 0° to 9° Grinding carriage (X axis) Max. travel: 320 mm Rjdpfx Acjw T Tb Hovsr Max. speed: 7.5 m/min Max. resolution: 0.1 µm Pneumatics Min. connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max. connection pressure: 3 bar Required space (version 1000): 3600 x 2000 mm Unless otherwise stated, technical data is provided without engagement and may be subject to errors or omissions.

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine Rodpfjvtpciex Acvor - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: ready for operation (used), Technical characteristics CNC ROVER A machining center BIESSE's Rover A series machining centers are specially designed for daily milling and drilling operations on panels, doors, component doors and furniture. The mobile gantry structure is made of extra-thick electro-welded sheet steel and stiffening hangers to minimize distortion during machining. For movement of the moving column along the longitudinal axis (X axis) and in the transverse direction (Y axis), BIESSE has opted for a rack-and-pinion solution, enabling higher acceleration and speed parameters than those achievable with a ballscrew. Controlled axis motors : Brushless motors, controlled by digital actuators. Hardened steel controlled axis guides. Automatic centralized lubrication system. Machine equipped with two vacuum pumps, 250 m3/h and 300 m3/h. Activation of vacuum and pneumatic systems is available from any point along the machine's X work zone. Working range (vertical electrospindle axis): X= 5540 mm Y= 1560 mm for 4 axes, 1570 for 5 axes Z= 230 mm with modules H=74 mm /Configuration 1B and 3B Z = 275 mm with modules H=29 mm / Configuration 1B and 3B 8 ATS aluminum worktops 1 X-axis metric ruler for correct positioning of worktops 8 metric rulers on Y axis for correct positioning of workpiece clamping systems 32 carriages 132 x 132 x H 41.5 mm Each carriage rotates the modules every 15° 32 plugs for closing the carriages Additional quick-fit connections for special jigs EPS (Electronic Positioning System) automatic positioning for worktops up to 1550 mm, allowing automatic positioning of clamping devices at selected points. An entire half machining zone can be positioned in hidden time while the machine is machining (avoiding major productivity losses). Each carriage is equipped with a blowing system to ensure that the machining plane on which it slides is always clean. 2 X-shaped machining zones Reference systems : Rear line stop with 115 mm travel Intermediate line stop positioned at 685 mm Front line stop positioned at 1348 mm 4 side stops with 140 mm travel (2 left and 2 right) 2 additional side stops (1 left and 1 right) 1 retractable linear stop for raw panels. Vacuum module 132 x 146 Vacuum module 132 x 75 Vacuum module 132 × 54 CFT system : Vacuum system for aluminum CFT modules, for left work area Aluminum vacuum module, dimensions : X=1250 mm, Y=625 mm, H=74 mm, for modular worktops With this solution, it is possible to prepare a continuous surface for thin/flexible panels or for nesting, bending, etc Uniclamp vice Support base 130 x 130 mm Flat disc 130 x 130 mm Double-movement Uniclamp vice Circular support base, diameter 130 mm Clamping workpieces thicknesses from 40 to 98 mm Horizontal vice, height 74 mm Chip and waste conveyor belt Configuration (3B) : Machining unit 5 axis 13kW electrospindle, up to 20000 RPM Rjdpfx Ajtqi U Iscvsr HSK F63 spindle Liquid-cooled C axis sewing : 360° continuous rotation Maximum undercut angle: -5°. Drilling unit BH 17 L drilling head Up to 17 independent tools Single and multiple drilling Work on all 5 faces of the workpiece and grooves with X-direction blade on the upper face. 10 independent vertical spindles, 32 mm centres 5 in X direction 5 in Y direction 3 opposite independent horizontal spindles, 32 mm pitch 2 in X direction 1 in Y direction 1 circular blade ⌀ 120 mm For groove in X direction (useful cut 25 mm) Multifunctional unit 1 circular blade ⌀ 300 mm 2 independent Z axes (1 for the electro-spindle and 1 for the drilling and multi

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Rjdpfxjw I Uxco Acvjr Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: HX1-1127, turning length: 1,123 mm, turning diameter: 540 mm, spindle speed (max.): 4,200 rpm, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, feed length Z-axis: 1,100 mm, bar diameter (max.): 52 mm, TECHNICAL DETAILS Swing diameter over bed: 960 mm Swing diameter over carriage: 610 mm Distance between centers: 1,123 mm Turning length: 1,000 mm Turning diameter: 540 mm Travel paths X-axis: 600 mm Z-axis: 1,100 mm Y-axis: 120 mm (+60 mm ~ -60 mm) B-axis: 225 mm (+110 mm ~ -115 mm) C-axis: 0.001° indexable Axis feed Feed speed X-/Z-/Y-axis: 36 / 36 / 18 m/min Motor power X-/Z-/Y-/B-axis: 5.5 / 7 / 4 / 3 kW Spindle Spindle mount: A2-6 (8") Spindle speed: 4,200 rpm Spindle motor power: 15 / 22 kW Spindle bore: 62 mm Bar capacity: 52 mm Bearing replacement diameter: 100 mm Upper tool spindle (B-axis milling head) Turret head: Milling head with ATC Indexing accuracy (positioning): 5° (coupling) Indexing accuracy (continuous): 0.001° (roller gear) Speed: 12,000 rpm Milling spindle motor power: 5 / 7.5 kW Tool changer and magazine Tool holder: HSK-A63 Tool places: 40 Tool selection: Fixed tool position Tool diameter: 90 mm Tool length: 280 mm Tool weight: 7 kg Tool change time: 1.8 s MACHINE DETAILS Control: Fanuc Series 31i Model A Tank volume: 560 l Connected load: 85 kVA Floor space (L × W × H): 5,500 x 3,400 x 2,600 mm Machine weight: 12,000 kg EQUIPMENT - High-speed machining with 600-block look-ahead - Air nozzle above chuck - Renishaw tool presetting device - Programmable tailstock Rjdpfewnpdbex Acver - 8" Kitagawa chuck - Chip conveyor with timer (crawler belt) - Internal cooling 20 bar with filter unit - Oil separator - Tool monitoring

Condition: good (used), Year of construction: 1990, functionality: fully functional, Circular saw Altendorf F 45 Year of construction 1990 Manufacture: Altendorf Germany Rjder Eq Spjpfx Acver carriage length: 3200 mm Manual height and angle adjustment rip fence 1250 Scoring unit 0.75 kW Motor power: 5, 5kW 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 with scorer 350mm Upper intake guard Altendorf Automatic motor brake Weight approx. 1200 kg Technical data subject to change

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting width (max.): 4,250 mm, controller model: Power Control CADmatic 4.0, cutting length (max.): 4,300 mm, Set consisting of Holzma panel dividing saw and Bargstedt area storage system! Holzma HPP 380/43/43/R TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz MACHINE DETAILS Control: Power Control CADmatic 4.0 – control unit with 17-inch flat display Operating voltage: 400 V (+10%/-5%) / 50 Hz Total connected load: 29 kW EQUIPMENT Grooving program Cut-out and tension relief program Labeling / labeling program / label printer PICA 108 Data interface for storage systems Cutting optimization software: Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 TECHNICAL DETAILS Carriage length: 13.45 m Span: approx. 12.5 m Upper edge of stack in storage: max. 1,700 mm Max. workpiece size: 4,200 x 2,070 mm Rjdpjxpu Rgefx Acver EQUIPMENT Rotation drive 1 loading station and 1 unloading station

Condition: excellent (used), Year of construction: 2006, CNC WORKING LINE FOR DOOR FRAMES, comprising: 1 HORIZONTAL LOADING TRANSFER MOTORIZED, model 0190 T.C Loading buffer with horizontal transversal belts and motorized rollers with variable speed control. 1 gasket insertion unit on a horizontal groove, consisting of: - 2 motorized gasket roll holders - 1 pressure roller insertion unit - 1 cutting unit positioned near the end of the profile 1 cutting/drilling machine for finished cuts, model 01TFRD SPECIAL, referencing the upper workpiece. Suitable for cutting, drilling, milling, and hinge (anuba) insertion on door jambs. MACHINE CONFIGURATION: Worktable constructed of a solid steel frame, with a fixed left section and a movable right section. Electronically controlled positioning system, supporting a total of 6 machining units: 2 on the right, 2 on the left, and 2 on the upper bridge. 1 CENTRAL MOTORIZED SHUTTLE with CNC control for milling the ends of jambs. 1 HORIZONTAL RADIAL CUTTING STATION, 0-45°, quick tilting with selector, featuring 2 groups (one per side). Each side with its own motor, including a timed entry system to prevent double cutting positions. Cutting motor power: 5 HP – 3000 rpm – inverter-controlled. Cutting blade bore: 30 mm. Saw blade diameter: 370 mm. Adjustable extraction hoods and safety guards. 1 HORIZONTAL HEAD DRILLING STATION 0-45°, fast vertical tilt with selector, with 2 groups (right and left). 2 HP motor, 3000 rpm. 7-spindle drilling head with 32 mm pitch. Individually selectable spindles. Groups travel on linear guides for increased speed and drilling accuracy, with longitudinal and vertical adjustment capability. 1 UPPER VERTICAL ROUTING (PANTOGRAPHING) STATION, on a transverse bridge, with 1 motor for counterplate slotting, 2 HP, 12,000/18,000 rpm. Vertical, horizontal, and depth (x-y-z axis) movements are CNC-controlled, utilizing precision linear guides and recirculating ball carriages. Equipped with tool holder collet. 1 HORIZONTAL ANUBA DRILLING STATION, with 1 CNC-positioned motorized unit moving in conjunction with the router. Includes a drilling unit, custom Anuba inserting unit, and custom Anuba feeder with approx. 35 piece capacity (depending on Anuba diameter). 1 LINE CONTROL COMPUTER Redpfx Aeygcmfocver Capable of importing data (CSV or ASCII) via MMC (Memory Card). Note: The imported data will be used for automatic positioning and execution of processing steps as per the job list. Workpiece dimensions: Minimum length: 580 mm (45° internal for frame) Maximum length: 3000 mm (45° external for frame) Minimum thickness: 30 mm Maximum thickness: 60 mm Minimum width: 75 mm Maximum width: 300 mm

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,480 h, machine/vehicle number: HR12471, power: 55 kW (74.78 HP), load capacity: 227 kg, empty load weight: 12,585 kg, construction height: 2,570 mm, fuel type: diesel, total length: 10,400 mm, drive type: Diesel, construction width: 2,440 mm, working height: 22,190 mm, Telescopic work platform Chassis number: HR12471 Condition: Ready for use and fully functional Technical condition: normal Front tires type: solid rubber Front tires condition: 40 - 60% Rsdpfx Aswlw D Decvsr Rear tires type: solid rubber Rear tires condition: 40 - 60% Description: additional equipment on request CE certificate, Can be driven at full height &#9632 All-wheel axle drive &#9632 No-spin differential and differential lock in the front axle &#9632 Swing axle &#9632 Wet SAHR disc brakes (front and rear axle) &#9632 Diesel engine 55.2 kW (74 hp) &#9632 Swing-out engine block &#9632 Fold-up fiberglass cladding &#9632 Upper carriage rotation 360 ° endless &#9632 Direction detection of the driving and steering function &#9632 Proportional control &#9632 Relay-based control &#9632 Color-coded and numbered wiring &#9632 50% gradeability &#9632 Foam-filled all-terrain tires &#9632 Wiring for AC power connection on the platform &#9632 Tilt alarm with drive function shutdown &#9632 Overload sensors &#9632 Horn &#9632 Modular platform railing &#9632 Half-height sliding railing with three entrances &#9632 Rope attachment points &#9632 Transport/lifting eyes

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,435 h, machine/vehicle number: HR13281, load capacity: 227 kg, empty load weight: 9,979 kg, construction height: 2,540 mm, fuel type: diesel, total length: 9,140 mm, drive type: Diesel, construction width: 2,440 mm, working height: 21,380 mm, Articulated telescopic platform Rsdpfx Asu Ari Uecvor Chassis number: HR13281 Condition: Ready for use and fully functional Technical condition: good Front tires Condition: 60 - 80% Rear tires Condition: 60 - 80% Description: further equipment on request - All-wheel drive with axle drive - Operator-controlled differential lock on the rear axle and limited slip differential in the front axle - Swing axle - Can be driven at full height - Straight boom function - Endless upper carriage rotation 360° - Climbing ability 45% - Swing-out engine block - Fold-up cladding - Platform railing in modular design - Half-height sliding railing with three entrances - Cable routing for AC connection to the platform - Direction monitoring of the driving and steering function - Proportional control - Control on relayand steering function - Proportional control - Relay-based control - Color-coded and numbered cable routing - Operating hours counter - Signal horn - Load monitoring system - Transport/lift eyes - Spring-loaded, hydraulically releasable multi-disc brakes (SAHR) on front and rear axle - Foam-filled off-road tires

Year of construction: 2008, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Rsdpfx Ajh Tyzqjcvjr Upper carriage Sennebogen BS 60 R CAT C 18 570 kW Twin turbo central lubrication optional with vibrator MR 100 or MR 125 V B Tonic for Vibrator / FOW Drilling / SCM and SMW Mixing Good working condition

Year of construction: 2008, operating hours: 9,750 h, condition: used, Piling rig RTG RG 25S -Upper carriage : Sennebogen BS 80 R -Engine : CAT C 18 570 kW -Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 Rjdpfx Acjh Tyz Asvor -Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Year of construction: 2008, operating hours: 9,750 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Rjdsh Tyzxspfx Acvsr Piling rig Upper carriage : Sennebogen BS 80 R Engine : CAT C 18 570 kW Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Condition: used, Year of construction: 2007, operating hours: 10,250 h, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Upper carriage : Sennebogen BS 100 Rjdoh Tyzbepfx Acver Under carriage : Bauer UW 130 Engine : CAT C15 / 433 kW Rotary: Bauer KDK 390 S Kelly: BK 40 / 470 Main winch : 30 to Ballast 6+6,5+11,5 to

Condition: excellent (used), O04024) AUTOMATIC BOARD STORAGE SYSTEM for PANELS - SIRIO Total Space Required (with panel saw) mm 10000 x mm 47000 (ca.) Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 150 m/min (ca.) moving carriage speed (on Y axis) 150 m/min (ca.) vacuum suction cup group speed (mobile in Z axis) 60 m/min (ca.) Vacuum suction cup group, 90° rotating Automatic management system (by scanner) of the cut panels (but remaining in the warehouse) O04025) PANEL SAW WITH REAR LIFTING TABLE Mod. FH 6 430 Numerical Control MCS Evolution. Software SIEMENS WinAC RTX Rear pushers (N.) 1 Twin Pusher - DUPLUS2. With No. 12 clamps / grippers Max. cutting width (mm) 4300. Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 135 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 460 / Kw 21 Turning device (rotating unit) at 90° Rjdpewrz Dbsfx Acvor Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system Total power (Kw) 33 (ca.)

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Redpfx Acjfg Ewzjvjr Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical data: - Robust German engineering for trimming, crosscutting, sizing, miter cutting, etc. - Operator controls placed overhead with swivel-mounted control panel at eye level, including template holder - 7" touchscreen control for electronically positioning cutting height, saw blade tilt adjustment, rip fence width stop, and optionally for scoring unit height and side adjustment; tool database for 50 saw blades and display of current RPM - Electromotoric height and tilt adjustment; saw blade tilt range from 0 – 47° - APA saw blade quick-release system; main saw blade RPM: 3000/4000/5000/6000 - Guard swings away on both sides, protective hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm - Rip fence with 1250 mm motorized cutting width - Sliding carriage with 3200 mm cutting length, lockable every 50 mm - Cross-slide with support roller and extendable support in both directions, mm scale length stop extendable up to 3500 mm, with 2 movable flip stops and 1 end stop; simultaneously usable as miter/fence stop, continuously adjustable from 0-46°, with automatic length compensation and index positions at 15°, 22.5°, 30°, 45° - Pushbutton control with electronic soft start (Start/Stop) - Electronic wear-free motor brake - Cutting length: 3200 mm - Max. cutting height: 155 mm at 90°, 105 mm at 47° - Motorized rip fence cutting width: 1250 mm - Cross-slide length stop extendable up to 3500 mm - Max. saw blade Ø 450 mm, Ø 400 mm blade can be retracted under the table - Cast iron table dimensions: 1200 x 665 mm; with additional table extension: 750 x 655 mm; table widening: 1430 x 940 mm - Table/working height: 900 mm - Extraction ports: 120 mm on machine body, 80 mm on protective hood - Motor output: 5.5 kW / 7.5 HP - Electrical supply: 400 V / 50 Hz - Sliding carriage, length and width fence profiles anodized - Machine body and swing arm powder-coated in anthracite RAL 7021; upper guard cover RAL 5000 violet blue; machine body RAL 7035 light grey - Required space: 7110 x 4150 mm - Weight: approx. 1050 kg, up to 1250 kg depending on configuration - CE compliant, GS tested, BG Wood Dust tested Special equipment: - Includes scoring unit 0.55 kW with electromotoric positioning for side and height adjustment via LED display and memory function; when the scorer is switched on, the unit automatically moves to the set position; when switched off, it automatically moves under the table to a side park position, allowing larger saw blades (over Ø 350 mm) to be used without removing the scoring blades - Includes MAIN SAW THREE-PHASE MOTOR WITH 7.5 kW (10 HP) instead of 5.5 kW - Includes Quickstep scoring system: Tool-free manual scoring width adjustment from 2.8 to 3.8 mm via index steps of 0.05 mm, incl. one set of saw blades 125 x 2.8-3.8 x 50 mm Z = 12+12 - Includes SWING-AWAY DEVICE FOR THE CROSS-SLIDE for quick and ergonomic movement to park position - Includes length stop with digital display on each stop flap, adjustable to 0.1 mm, max. length 3300 mm Rodpfx Ajw I Ummscvsr - Includes transport pallet

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 200 mm, workpiece height (max.): 130 mm, TECHNICAL DETAILS Workpiece Dimensions Max. workpiece length: 3,200 mm Min. workpiece length: 200 mm Max. workpiece thickness: 130 mm Min. workpiece thickness: 30 mm Max. workpiece width: 200 mm Min. workpiece width: 30 mm Tenoning Carriage Tenon length at max. tenoning diameter: 320 mm Tenoning carriage speed: 0 - 40 m/min Profiling speed: 4 - 20 m/min Table height for profiling: 850 mm Feed roller diameter: 100 mm Distance between feed rollers: 150 mm Crosscut Saw Motor power: 4 kW Speed: 3,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Milling Unit for Tenoning High-performance spindle with upper bearing: Diameter 50 mm, length 620 mm Motor power: 7.5 kW Speed: 3,500 rpm Max. tool diameter: 320 mm Axis travel below work table: 575 mm Milling Unit for Profiling Spindle: 50 x 320 mm Motor power: 7.5 kW Speed: 6,000 rpm Min./max. tool diameter: 130 - 250 mm Rsdoxx Un Repfx Acvsr Spindle Speed: 1,000 - 12,000 rpm Max. motor power: 11 kW Max. tool diameter: 230 mm Tool positions: 24 Max. weight per tool: 10 kg EQUIPMENT Automatic chip protection Jolly Automatic brake RAPID 24 automatic tool changer Fast vertical adjustment via brushless motors Water cooling for electrospindle Vector rotary axis for 360° electrospindle rotation Note: Further technical details can be found in the attached document!

Condition: new, Year of construction: 2025, machine/vehicle number: 6939, functionality: fully functional, Fimal Swing Spindle Moulder TX 160 "Partnership Edition" Fence including parallel adjustment with handwheel and digital readout, Handwheel adjustment with digital readout for front fence jaw, Electric travel swing mechanism for the complete fence, Quick-release lever for locking, Aluminium fence jaws and pressure device, curved fence, Electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for the selected spindle speed, Electrics and safety devices according to CE standards, Rjdpfxovlw Ide Acvsr Table dimensions: 2,500 x 780 mm, Spindle: diameter = 30 mm, height = 140 mm, Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm, Max. tool size under table: diameter = 320 mm, height = 50 mm, Motor: 7.5 kW / 10 HP, 400 Volt, 50 Hz, Including automatic star-delta switch, Sound level according to EN 27960: 83.9 – 87.3 dB(A), Spindle tilt: -45° to +45°, Electromotive spindle tilt adjustment including electronic readout and decimal impulse setting, "Partnership Edition" complete with: "L" version with bilateral table extension and pull-out workpiece support with EMERGENCY STOP button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Forward/reverse rotation in accordance with CE standards, Prepared for installation of AIGNER integral fence jaws, Available ex-location Seevetal, without pre-carriage, freight, or commissioning, As inspected, subject to prior sale.