Used Lower for sale (6,260)

Condition: used, Year of construction: 2007, Lower belt sander Rubber shock mat training Gbedeyf Hdxjpfx Afnsh Width 400mm Clearance height 400mm 380V

Condition: used, Year of construction: 1999, sanding width 200 mm sanding height max. 200 mm engine 2 x 5,5 kW feed 6/11/16 m/min Godpfx Afoyhq Uyonsbh

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - The conveyor belt integrated into the table is driven by a geared motor. - The built-in dial gauge on the handwheel and at the front of the table allows for precise monitoring of material removal. - The machine is designed on the principle of thickness reduction (thickness planing), which means uniform material removal and grinding accuracy to within 0.1 mm. Gjdpfxeygbpxo Afnsbh - Optimal grinding pattern thanks to the oscillating sanding belt. - No belt misalignment due to pneumatically controlled oscillation. - Sanding belt length: 1600 mm - Sanding belt width: 200 mm - Table length: 1000 mm - Working height: 120 mm - Drive motor: 5.5 kW Availability: short-term Storage location: Flörsheim

Year of construction: 1977, condition: ready for operation (used), Two identical single wood belt sanding machines Löwer are available. Sanding belt length: 1600mm, sanding belt width: 160mm, working width: 150mm, feed rate: 16m/min, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 1400mm/1000mm/1600mm, weight: approx. 650kg. On-site inspection is possible. Gbjdpfxex U Dw As Afnjh

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Godpfox Swqkjx Afnebh Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1983, incl. new feeder beltusedmanufactured by Löwertype RSM 280 SXbuilt in 1983Masch.-No. 5245number of aggregates 1 piecemotor 5,5 kWsanding width ca. 190 mmsanding height ca. 120 mm3 feed speeds 6 / 11 / 16 m/t length ca. 1600 mmbelt width ca. 200 mmheight indicator gauge analogcombined aggregates roll/padfixed sanding pad1-beltstrip blowing deviceexhaust connection D 100 mmrequired space ca. 1300 mm x 800 mm x 1700 mmweight ca. 550 kgtotal connected power ca. 6,5 kWlocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Gsdpfxjvwf Nyo Afnebh

Condition: used, Year of construction: 1984, second hand Make Löwer Type ZA 3000 Year of construction 1984 Machine no. 5485 Motor 1.5 kW motorized brakes Number of spindles 2 x vertical saw, horizontal milling cutter Clamping height 200 mm Diameter 40 mm Cross-cut saw Table size 800 mm x 350 mm Rotatable stop Stop ruler 2000 mm, Festo LAS stop system Manual workpiece clamping Extraction connection 120 mm Required space approx. 1700 mm x 1700 mm x 1600 mm Gsdpevwf I Aefx Afnsbh Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition, as viewed, without overhaul, without guarantee and warranty

Condition: used, Year of construction: 1975, with new feed carpet, not installed second hand Make Löwer Type RSM 280 S Year of construction 1975 Machine no. 3528 Number of belt units 1 piece Engines 5.5 hp Sanding width approx. 140 / 150 mm Grinding height approx. 120 mm band oscillation tape blow-off Feed speed 6 / 11 / 16 m/min. Band length approx. 1600 mm Band width approx. 160 mm Extraction connection D 100 mm Space requirement approx. LxWxH mm 1400x1000x1600 Weight approx. 650 kg Gbodsvwgczjpfx Afneh Storage location 97447 Gerolzhofen Handover in the current condition as seen without guarantee and guarantee - free loaded -

Condition: good (used), Year of construction: 2010, machine/vehicle number: 11176, Offer 25439 Technical data: - Abrasive diameter: 150 mm - Swivel head – grinding unit pivotable and tiltable on articulated arm - Dust drawer - Disc speed infinitely adjustable - Table dimensions: 1400 x 980 mm - Table height approx.: 870 mm Gjdpfxsyapx Uo Afnsbh - Drive: 400 V / 0.75 kW - Pneumatic connection: 6 bar - Space requirement approx.: W 1700 x H 1700 x D 1300 mm - Weight approx.: 400 kg

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, oscillation, frame sanding device, feed belt, belt cleaning Gsdsu R Tbhepfx Afnobh ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, weight: 550 kg

Condition: used, Polishing sander Löwer FA 4 S Year of construction 1998 Machine no. 9667 400V, 14.5Amp. 4x 0.37kW motor Working length 3000mm Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gbedpfx Afownh Avjnoh Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2025, condition: new, Table dimensions 1000 x 400 mm pneumatic clamping 4 Stk. moveable ja_yes ja loading dimensions L x W x H 1200x800x1200 mm weight 220 kg For fast compression of Minizinken- or Softline compounds Gbedpfx Afjx Ak Hqjnsh especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!)

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, Godpfx Afovu Hgbjnobh and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: new, Number of sanding units 1 st. sanding width 150 mm Sanding height max. 150 mm Loewer edge finishing machine MiniSpin N ----- Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Gbodpfxsxmk Ays Afneh Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush

Condition: new, Number of sanding units 2 St. sanding width 190 mm Sanding height max. 2-180 mm LÖWER double-sided grinding machine DSM 2000 ----- Double-sided single wood sander for sanding Solid wood such as window wood etc. Stable top quality Guide with long casting tables, brushing and finishing equipment and conveyor belt feed. Suitable for high continuous loads even with higher chip removals. - Staggered sanding and finishing units at the top and bottom - Directly driven rubberized grinding rollers for slip-free power transmission - Combined grinding via roller and shoe for high chip removal at the same time flat intervention zone - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and higher grinding Grinding belt service life - Forced pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the sanding rollers Gedpfx Afjvu Hdtonsbh Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom using a precision threaded spindle Dimension display via scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinders with constant clamping pressure - Sanding belt change with pneumatic belt relaxation in seconds - Adjustment of the sanding belt run when changing the belt - electro-pneumatic compressed air monitoring - Run-in protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated non-slip and non-stick conveyor belts over heavy, 1000mm long cast tables with a finely planed surface and Spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - automatic workpiece thickness scanning (no previous measurement necessary) - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Grinding thickness: 2-180mm - two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11 and 16 m/min. - automatic height adjustment: 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle: 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height: 850mm - Length: 2105mm - Length with control panel 2490mm - Width: 880mm - Height: 1910mm - Weight: approx. 1500 kg - Operating voltage: 400 volts, 50 Hz, 3P - CE version ----- ----- Basic price of the machine on request! ----- ----- Special accessories with surcharge: continuous feed 4-20 m/min. for speed adjustment to the previous machine Price on request Workpiece blow-off - using nozzles from above and below at the machine ...

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm Gbjdexfl Eaopfx Afnoh max. sanding height 200 mm year of manufacture 1994 with CE mark

Condition: used, Year of construction: 1982, overall weight: 950 kg, Abrasive belt length 2200 mm, abrasive belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, abrasive belt speed approx. 21 m/s, feed rates 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air jet, incl. chassis Gsdexq Ehxepfx Afnebh

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Gsdpfx Afjv Dfp Honobh Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: new, * IMMEDIATELY AVAILABLE * Including lowering loading platform / manual hydraulics / braked Technical specifications: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE • Permissible total weight: 2,700 kg • Unladen weight: approx. 950 kg • Payload: approx. 1,750 kg • Internal dimensions: 341 x 156 x 200 cm (L x W x H) • External overall dimensions: 510 x 228 x 250 cm (L x W x H) • Loading edge height: approx. 48 cm • Tires: 195/50R13C steel rim • Brake: yes • Support wheel: yes, 45 mm with clamp • 100 km/h approval: available at extra cost • Including vehicle documents Standard equipment: • Multiplex wooden floor – extremely robust • 30 mm steel sheet sandwich • Rear doors + folding loading ramp combined • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Multiple sturdy crossmembers for high point load capacity • Hydraulically lowerable loading platform • Mechanical safety locking of the pivot axle during operation • With driving ramp at the rear • Additional continuous longitudinal reinforcements welded in • Tool/storage box at the front • 10 tie-down rings within the loading area • Rear license plate holder • AL-KO overrun brake system and handbrake • AL-KO coupling head • Reinforced, very stable V-drawbar • Reverse motion automatic • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Recessed lighting in rear frame • Central support wheel with clamp • Registration documents: COC papers Optional accessories (on request): • Electric pump instead of hand pump • 100 km/h approval with shock absorbers • Lashing rails on the side walls • Anti-theft device • Spare wheel • High tarpaulin • Additional lashing rings • Reversing lights • Lashing straps • ...and much more New vehicle with warranty and TÜV (vehicle inspection). ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance or temporary registration plates (Germany) can be provided. - Export license plates incl. customs clearance possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers immediately available! Gsdpeyiva Refx Afnebh We have been an authorized dealer and service workshop for over 30 years for: Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, omissions, and prior sale excepted -

Condition: new, * IMMEDIATELY AVAILABLE * Including side door / lowering platform / manual hydraulics / braked Gbjdpfx Afoyivbbenjh TECHNICAL DATA • Brand: Vezeko • Model: Husky FB K • Vehicle type: Drop-bed trailer • Vehicle condition: New vehicle • First registration: without first registration • Technical inspection (TÜV): 2 years from initial registration • Internal dimensions (LxWxH): 344 x 157 x 200 cm • External dimensions (LxWxH): 493 x 228 x 255 cm • Load height (from ground): 44 cm • Permissible total weight: 2,700 kg • Unladen weight: 871 kg • Payload: 1,829 kg • Chassis: Low-loader (wheels beside body) • Tyres: 195/50R13C • Suspension: AL-KO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • 15 mm multiplex birch floor, anti-slip coated – extremely robust • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Multiple crossmembers for high point load capacity • Superstructure made of extremely solid welded steel panel sandwich, insulated, 30 mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of 25 mm GRP sandwich • Two-winged rear door with lockable stainless steel bar lock • Doors with special sealing profiles of hard/soft plastic • Side door, standard right front, approx. 70 cm, with triple-bolt security lock, lockable from inside and outside • Rear frame made from hot-dip galvanized steel, solidly welded • Loading platform hydraulically lowerable • Mechanical safety lock for pivot axis during travel • Rear foldable stainless drive-on ramp • Additional longitudinal reinforcements fully welded • Front storage box • 10 lashing eyes within V-loading rail, rubber-coated, pull force (750 DaN/kg) • Rear number plate holder • AL-KO overrun device and parking brake • AL-KO coupling head • Extra robust V-drawbar reinforced • Reversing automatic system • 13-pin plug • Reversing light • High-capacity safety lighting • Integrated rear fog light • Rear lane marker lights in LED • Rear frame lights recessed • Centrally mounted jockey wheel with clamp Optional accessories available – feel free to inquire: • Electric pump instead of manual pump • 100 km/h approval with shock absorbers • Lashing rails on the wall • Anti-theft device • Spare wheel • Additional lashing eyes • Reversing light • Lashing straps • And much more New vehicle with warranty and technical inspection (TÜV). ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance, or temporary registration plates (Germany) can be provided - Export registration with customs clearance possible Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available from stock! For over 30 years: Official dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands - Errors, omissions, and prior sale excepted -

Condition: used, Year of construction: 1997, machine/vehicle number: 1380, functionality: fully functional, saw blade diameter: 500 mm, overall weight: 350 kg, saw blade speed: 2,800 rpm, Swivel range from 15° left to 15° right, indicated via digital display Right-hand length stop, adjustable by handwheel with digital display Chip deflector guard Two-hand operation 2 vertical hold-down cylinders Laser cutting line indicator Gbsdpfx Ajyi T Rysfnsh 2 x roller conveyor, approx. length 4300 mm

Condition: good (used), Die block, W x H approx. 3500 x 260 x 190 mm, . Total length = 3500 mm Length of the reducers = 2600 mm . V-groove, without reducers, opening width approx. 100 mm V-groove, with reducers, opening width approx. 150 mm, H = 220 mm . Godpfx Afsyizlrsnobh .

Condition: excellent (used), CATALOG NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle Godeyitzxopfx Afnebh - Height adjustable (up/down) - Guide fence - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES – German manufacture – Used milling machine – Very good condition Net price: 11,900 PLN Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)

Condition: excellent (used), Catalogue number 6691 TECHNICAL DATA Gedpfxoyh Unhj Afnobh - spindle diameter: 25mm - spindle working height: 100mm - interchangeable spindle - spindle lock - height adjustable (up/down) - spindle support - hold-downs - original cast iron fence with full adjustment - 4 rotation speeds + reversible (right/left): 3000, 4500, 6000, 9000 rpm - table dimensions + mitre gauge: 1020x900mm - motor: 6kW - extraction port diameter: 2x120mm - dimensions (L/W/H): 1100x1070x1640mm - weight: 658kg – spindle support – mitre gauge – brake – very good condition, used milling machine Net price: 11,500 PLN Net price: 2,740 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6856 TECHNICAL DATA - Spindle diameter: 30 mm - Spindle working height: 110 mm - Spindle locking - Electrically adjustable up/down + angle, 0.18 kW - Original guide with full adjustment - 5 spindle speeds + forward/reverse: 2900, 4400, 6000, 8000, 10000 rpm Godpfx Aex R Dw Ujfnjbh - Table dimensions: 1200x900 mm - Cast iron table - With electric brake - Motor approx. 7.5 kW - Extraction nozzle diameter: 150 mm - Machine dimensions (L/W/H): 1750x1200x1750 mm - Weight: 990 kg ADVANTAGES – German-made – Tilting spindle – Brake – Used milling machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)