Used Upe 80 120 F for sale (65,693)

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Pjdpfezuabzex Adwerb Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2007, 3 x Frech die-casting machines Pjdpfx Aoz Hkg Aedwjrb DAW 80F RC, year of manufacture 2003, DAW 125 S DV, year of manufacture 1999, DAW 125 F, year of manufacture 2007.

Condition: used, Year of construction: 2006, CLAMPING UNIT Clamping force: 800 kN Locking force: 800 kN Distance between tie bars: 420 x 420 mm Max. opening stroke: 450 mm Min. mould height: 250 mm (200 / 175 mm with ZE 214) Max. distance between platens: 700 mm (750 / 800 mm with WA 211) Platen size (H x V): 590 x 600 mm Max. mould weight: 700 kg Max. mould weight on moving platen: 450 kg HYDRAULIC EJECTOR Ejector stroke: 150 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (120) Screw diameter: 22 mm L/D ratio: 20 Injection pressure: 2591 bar Stroke volume: 41.8 cm³ Shot weight (PS): 37 g Max. dosing stroke: 110 mm Max. nozzle stroke: 200 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN Barrel heating power: 5.1 kW Hopper capacity: 35 l GENERAL Oil tank capacity: 140 l Pump motor: 5.5 / 7.5 kW Total installed power: 10.6 / 12.6 kW Dry cycle time (EUROMAP 6a): 2.01 s – 196 mm / 1.82 s – 196 mm Net weight (without oil): 2550 kg (2650 kg with full cladding) Dimensions (L x W x H): 3.4 x 1.2 x 2.0 m (3.6 x 1.2 x 2.0 m with full cladding) Psdpfx Aoz D U Sksdwerb Noise level (idle / full load): 56 / 71 dB(A)

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Prsdpfezy Hmbsx Adweb Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Predpfezy Hfkox Adwjb Feed opening: 800 x 1200 mm

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Prjdpfx Ajy D Adtsdwob Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: excellent (used), Year of construction: 2020, Ref: 11147 . 2020 Horizon HT-80 Three-Knife Trimmer Fully automatic three-knife trimmer designed for short-to-medium-run and digital/book-of-one production. Can work offline or inline with Horizon binders up to 1,000 cycles/hour, 51 mm book thickness, automatic setup and book-of-one capability Features: Automatic size setup via colour touchscreen: input the untrimmed and finished book dimensions and the machine automatically positions the relevant sections. Servo-controlled jogging and clamping provide accurate registration, while the swing-knife cutting action is designed to give a clean three-side trim. Also capable of book-of-one production. Books of the same finished size but different thicknesses can be processed consecutively It can run inline with Horizon BQ-470, SB-07 and SB-09S systems, as well as offline. Specification: Untrimmed book size – Max. 330 × 330 mm Untrimmed book size – Min. 145 × 105 mm Finished book size – Max. 300 × 300 mm Finished book size – Min. 139 × 99 mm Book / trim thickness: 1–51 mm Maximum head & foot trim: 30 mm each Maximum fore-edge trim: 30 mm Production speed: 400–1,000 cycles/hour Clamping pressure: 4–8 kN, up to 10 kN depending on conditions Clamp drive: Servo motor Standard formats: A4, A5, 8.5 × 11", 5.5 × 8.5" Job memory: 200 jobs Dimensions: 1,610 × 2,610 × 1,515 mm W × D × H Pjdpfx Asz Akmkodworb Power: 3-phase, 200–230 V, 50/60 Hz; 380/400/415 V versions via transformer

Condition: used, Spiral mixer Diosna SP 120 F Dough capacity: 120 kg Flour capacity: 75 kg Podez A R Tbspfx Adwsrb Timer control Digital control panel CS03 Two speed settings Reverse function Movable with locking mechanism

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Machine condition: Podpfx Aoz D Dxgedwjrb • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price.

Condition: used, Year of construction: 2021, Grundfos Dry-Running Pump, electronically controlled TPE3 40-80 S-A-F-A-BQQE-CDB Art. 99272194 Single-stage in-line pumps with speed-controlled MGE motor PN16. 3 x 380-500 V DN100 with MGE90SC 2-56C-IA-150 motor P.C.: 2114 We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but operational. The pump was functioning perfectly up until removal a few weeks ago. Manufacturer: Grundfos Type: TPE3 40-80 S-A-F-A-BQQE-CDB Description: Single-stage in-line pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2970 rpm Rated flow: 12.3 m³/h Rated head: 5.4 m Mechanical seal: BQQE Pump casing: cast iron Impeller: cast iron Podpfeyf Hf Nex Adwsrb Gross weight: 41 kg For further technical details, please refer to the nameplate. Scope of delivery as pictured Inspection prior to purchase is possible and expressly encouraged. #Shelf 11-1-9 Shipping possible, but the buyer bears shipping costs. Worldwide shipping available.

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Prodpfx Adozl Rqhjwjb Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Key data (according to manufacturer's specifications ENGEL) • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. Psdpfx Aoz Eimfedwsrb • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Terms and conditions • Price on request • Available presumably from week 48/2026 • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming knives. A good entry-level machine with extensive equipment. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Podszn Afpepfx Adwsrb Noise protection hood Extendable workpiece support Dust extraction connection 1x100 mm, 4x80 mm, including the shown ducting to 200 mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Top pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color change from white to transparent Gluing section with automatic edge feeding for roll material up to 3 mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming knife R2, manually adjustable Glue joint trimming knife with large roller, pneumatically controlled Hood locking CE mark Operating manual as a folder All indexable inserts of the milling units and the trimming knives have been renewed or re-sharpened, saws sharpened, and diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping milling unit has not been renewed, but is still sharp. Original paint, only a few spots retouched. Dust extraction hoses renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight: approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, mileage: 547,696 km, power: 426 kW (579.20 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 10,620 kg, maximum load weight: 109,380 kg, overall weight: 120,000 kg, tire size: 315/80 22,5, axle configuration: 6x4, wheelbase: 3,250 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, operating hours: 547,696 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, number of beds: 1, Equipment: ABS, air conditioning, airbag, cabin, cruise control, differential lock, fog lights, immobilizer system, onboard computer, parking heater, soot filter, truck registration, Vehicle number for inquiries: 41768 Mercedes-Benz, 2658 * Year of manufacture: 2016 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Power windows * Cab * Automatic climate control * Refrigerator * Air suspension * Particle filter * Retarder / ZF-Intarder * Service booklet * Sleeper cab * Heated seats * Auxiliary heater * Auxiliary air conditioning * Cruise control * Immobilizer * On-board computer * Differential lock * Long-haul transport > 7.5 tons * Digital tachograph * Fleetboard * Radio/CD player * CB radio * Sound system * OBU preparation * Refrigerator * Airbag * Electric windows and mirrors * Remote central locking * Air horns * 2 bunks * 2 x diesel tanks * AdBlue tank * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Transmission type: Automatic Prjdpfez Efyujx Adweb * Suspension: Leaf/Air * Gross vehicle weight: 120,000 kg * Unladen weight: 10,620 kg * Payload: 109,380 kg * Permissible gross vehicle weight: 120,000 kg * Tire condition, 1st axle: -- Tire size: 315/80 R22.5 * Tire condition, 2nd axle: -- Tire size: 315/80 R22.5 * Tire condition, 3rd axle: -- Tire size: 315/80 R22.5 * Wheelbase: 3250 mm * Tire sizes: 315/80 R22.5 * 2658 LS 6x4 F 16 Big Space Heavy-duty 120 tons * Special body behind the cab * Large light bar with all-round lights * Stainless steel boxes and running boards * Heavy-duty fifth wheel coupling 35 * Tires front axle 385/65 R 22.5 - rear axle 315/80 R 22.5 Disclaimer: Subject to changes, prior sale and errors You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: new, functionality: fully functional, overall weight: 17 kg, 7 units in stock. Various models available. Export possible. Psdpfxsyyp Tms Adwerb

Condition: used, Year of construction: 1989, plate thickness 4 mm cutting angle adjustment 30-120 ° table height 900 mm 407 weight of the machine ca. 760 kg dimensions of the machine ca. 1300x1000x1150 mm Prjdpoyv N Hlefx Adwob

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, year of last overhaul: 2024, total length: 1,200 mm, total width: 800 mm, input frequency: 50 Hz, type of input current: three-phase, electrical fuse: 16 A, Diosna SP 80 F/TU spiral mixer Compact kneading machine for customized doughs! Pjdpjyakizofx Adwerb 2 timer switches with program control Spiral mixer with 2 speeds Stainless steel bowl and spiral Robust technology Connection: 400 V Top used machine with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Come and visit us!

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart Pedeyrd U Uopfx Adwerb - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: excellent (used), mileage: 522,907 km, power: 268 kW (364.38 HP), first registration: 11/2000, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 3, Year of construction: 2000, Equipment: ABS, crane, = Additional options and accessories = - 3 chairs - Beacon(s) Prodpfjznd Dgjx Adweb - Lift Axle - PTO - Radio/CD player - Steering Axle - Toolbox = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 10,60 m Capacity kilo: 6560 kg = More information = Number of doors: 2 Cab: single Front axle: Steering Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension GVW: 28.000 kg Crane: PALFINGER, year of manufacture 2000, behind the cab Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 522,907 km, power: 268 kW (364.38 HP), first registration: 11/2000, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 3, Year of construction: 2000, Equipment: ABS, crane, = Additional options and accessories = - 3 chairs Podpezndyzjfx Adwerb - Beacon(s) - Lift Axle - PTO - Radio/CD player - Steering Axle - Toolbox = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 10,60 m Capacity kilo: 6560 kg = More information = General information Number of doors: 2 Cab: single Technical information Number of cylinders: 6 GVW: 28.000 kg Axle configuration Front axle: Steering Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension Functional Crane: PALFINGER, year of manufacture 2000, behind the cab Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Podpfeyzy D Eex Adwjrb Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: excellent (used), Year of construction: 1999, operating hours: 48,400 h, 1 unit of used blow molding machine Manufacturer: Fischer - W. Müller Type: FMB 3-120 Year of manufacture: 1999 Clamping force: 120 tons Extruder type: 120/24 WT Accumulator head: BFKS25, equivalent to approx. 17.75 kg The machine can produce containers up to a size of 200 liters. A tool for a 120-liter container with a press-ring closure is available for the machine. Podpfeynutmox Adwerb Video available!

Condition: used, Year of construction: 2020, Industrial bandsaw CENTAURO SUPERCUT 80 BANDSAW FOR THIN SLICES WITH THE HIGHEST PRECISION The major advantages of a compact and versatile machine for all applications in the field of thin slicing: Thin slicing from 2 mm material thickness Pedpfxezvflno Adwerb Maximum cutting accuracy up to 0.15 mm Minimum cutting kerf from 1.3 mm Ideal for cutting dry and wet wood as well as alternative materials The surface of the thin lamella can be glued directly, without any further post-processing being required User-friendly electronic control Two programmable feed speeds of the conveyor belt from 0 to 30 m/min for optimal cutting quality and a longer service life of the saw blade Optical sensor for starting the cutting cycle and for automatic speed switching Ground work table Flexam feed belt for optimal performance 6 height-adjustable rubber pressure rollers, whose position can be adjusted to open/close, in order to ensure the optimal pneumatic clamping pressure on the workpiece during the feed and cutting process Oleopneumatic saw blade tension for optimal cutting performance Upper and lower Chaco saw blade guides, which ensure optimal stability of the saw blade during the cutting process Internal and external lubrication of the saw blade for removing resin residues and chips 4 dust extraction connections to optimize the extraction of dust and chips Maximum cutting height 400 mm (optional 500 mm) Maximum cutting width 400 mm Powerful quality motor with 15 kW (20 hp) Ethernet interface for online service and remote maintenance Carbide or stellite saw blades for optimal cutting performance Maintenance-friendly design and easy service

Condition: good (used), Year of construction: 1994, functionality: fully functional, planing width: 800 mm, overall weight: 1,600 kg, height adjustment type: electric, number of planer blades: 4, planing height: 200 mm, Equipment: motor brake, Year of manufacture: 1994 Planing width: 800 mm Maximum planing height: 200 mm Number of knives: 4 Minimum workpiece length: 500 mm Minimum planing height: 5 mm Speed: 4,500 rpm Table length: 1,100 mm Prodswma N Sjpfx Adwsb Number of feed rollers: 1 Main motor: 11 kW Maximum feed: 32 m/min Infinitely variable feed: Yes Table rollers: Yes Digital thickness display: Yes Sectional pressure roller: Yes Electric height adjustment: Yes Cutter shaft: Centrifugal shaft Centrifugal shaft: Tersa Outfeed: Steel roller Total power: 16 kW Approx. weight: 1,600 kg Space required (length): 1.2 m Space required (width): 1.65 m Space required (height) : 1.8 m

Year of construction: 2011, condition: used, Vacuum pump capacity: 100m³/h, final vacuum: 99.98%, vacuum chamber: aluminum, housing: stainless steel, power: 3.5kW. Machine dimensions X/Y/Z: approx. 900mm/820mm/1070mm. The machine is fully functional and has no gas flush system. Documentation available. An on-site inspection is possible. Psdpfx Adoz Aggasworb