Used Universal Milling Head for sale (19,208)

Condition: used, GAMBIN 3M universal milling machine Longitudinal travel: 1000mm Transverse travel: 420mm Vertical travel: 710mm Bwjdpfjzb I R Esx Afmsw Spindle: SA40 Table: 1520 x 385 Speeds: 25 to 2000 rpm Weight: 3800 kg

Condition: excellent (used), 1 used, partially overhauled vertical milling head with large overhang suitable for drilling machines manufactured by PAMA (origin: Italy) or other manufacturers Spindle mount: SK 50 Overhang: 660 mm Flange size: 465 x 440 mm Inner bore: 294 mm Speed range: up to approx. 1,500 rpm Max. drive power: approx. 22 kW Dimensions L x W x H: 750 x 440 x 465 mm Weight: 240 kg Accessories / Special features: • 1 rotatable axis (left/right) • Stepless angle adjustment, manual • 4 fixed indexing points, each 90°, with dowel pins • Tool clamping with tightening rod • For retrofitting to conventional, NC or CNC milling machines or drilling machines of any type, L-R pivoting, manual tool clamping, … Bwedpfxsz Euyde Afmew The following partial overhaul was performed: - Grinding of the SK 50 tool mount on the milling spindle - Replacement of the bearings in the milling spindle - New shaft seals Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1984, x-travel 760 mm y-travel 381 mm z-travel 450 mm quill stroke 152 mm table-size 1300 x 305 mm control Heidenhain TNC 360 tool adaptor SK40 turning speed range 100- 4.000 U/min rapid speed 5000 / 7000 m/min feed speeds 2,5 bis 3000 mm/min Bodoz Euv Sjpfx Afmjww power requirement 2.2 kW diameter of quill 101 mm total power requirement 15,0 kW weight of the machine ca. 2,4 t dimensions 2,4 x 2,3 x 2,2 m Equipment: - Heidenhain TNC 360 - Coolant system - Hydraulic tool clamping - Milling head with quill - Machine light - Chip tray - Documentation

Condition: excellent (used), Year of construction: 2003, Tool holder, vertical + horizontal SK 40 Table size L x W 710 x 315 mm Speed range, vertical spindle 63 – 2500 rpm Speed range, horizontal spindle 45 – 1800 rpm Travel ranges: X-axis, longitudinal adjustment, automatic / manual 400 / 420 mm Y-axis, cross adjustment, automatic / manual 220 / 228 mm + cross slide 375 mm Z-axis, vertical adjustment, automatic / manual 350 / 380 mm Adjustment of the quill, vertical, manual 80 mm Machine dimensions, approx. 1550 x 1620 x 1850 mm Machine weight, approx. 1300 kg Accessories / Special features: • 3-axis digital display, manufacturer HEIDENHAIN • Infinitely variable feeds with rapid traverse in the 2nd feed stage • Two working spindles for horizontal and vertical tool holders (vertical milling head does not need to be removed during machining when the horizontal spindle is in use) • Ball screw spindles for the X and Y axes, simultaneous milling in X and Y direction possible • Trapezoidal screw spindle, hardened and ground, for the Z axis (vertical) • All operating elements on one side, in the mobile control panel • Additional manual adjustment of the cross slide increases the working area of the machine, even beyond the table surface • Safety handwheels • Tool holder according to DIN 2080 – steep taper ISO 40 • Automatic central lubrication for speed and feed gears • Vertical milling head with quill, swiveling L+R • Fixed angle table 315 x 710 with 5 slots 12 mm, spacing 63 mm • Tool clamping spindles, horizontal and vertical Bsdpfxjziutze Afmeww • Splash guard made of Plexiglas on 3 sides of the horizontal table • Coolant system • CE compliant TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1983, x-travel 1000 mm y-travel 450 mm z-travel 450 mm table surface area 1370 x 400 mm number of T-slots 5 Stck. spindle turning speed range 32 - 1500 U/min tool taper SK 50 total power requirement 7,0 kW weight of the machine ca. 3,1 t dimensions 2,1 x 1,7 x 1,9 m Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydraulic tool cutting - Coolant system - Central lubrication Bwsdpfey Ehxljx Afmew

Condition: used, x-travel 315 mm Bsdpfx Aexwdvhofmsww y-travel 180 mm z-travel 320 mm 5 14 mm ISO 40 DIN 2079 45 - 1950 U/min flute distance 10 - 170 mm/min no. of flutes 4 m/min total power requirement 5,1 kW distance between table/spindle 1400 kg diameter of rotary table 3000 x 2700 x 1800 mm - Robust/powerful universal milling machine - HEIDENHAIN digital display - Coolant device

Condition: used, Year of construction: 2007, x-travel 480/500 mm y-travel 230/250 mm z-travel 380/400 mm speeds 45 - 2240 U/min table surface area 1000 x 250 mm Bsdpfot Tqw Dox Afmoww tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 3 kW weight of the machine ca. 1550 kg dimensions of the machine ca. 2600 x 2200 x 1800 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual

Condition: good (used), Year of construction: 2001, Power: 4.5 kW Drilling capacity: 30 mm End milling: 25 mm Bwedpszvnldefx Afmsw Motor power: 0.85/1.5; 2.2 kW

Condition: used, x-travel:600 mm y-travel:400 mm z-travel:640 mm Bsdpfs Ad Shijx Afmoww turning speeds:30 - 1800 U/min table surface area:880 X 495 mm total power requirement:4 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,2 x 1,8 x 2,1 m

Condition: good (used), Year of construction: 1987, Available immediately from location. CNC control: Heidenhain TNC 155 X travel: 600 mm Y travel: 200 mm Z travel: 150 mm Max. workpiece weight: 300 kg Bwsdpfowazwksx Afmew Table clamping area: 800 x 300 mm Table height: 800 mm Spindle speeds: continuously variable 40-2000 rpm Drive power: 4 kW Infinitely variable feed rates in all directions Dimensions (L x W x H): 2200 x 2700 x 2400 mm Approx. weight: 2000 kg

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Bwedpfx Aoyf Dp Eofmow Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1988, condition: used, tool adaptor SK 40 Bedpfeipyx Ejx Afmjww weight 165 kg Type Uni. 0 Universal type milling head with SK 40 spindle of a milling machine Heckert FU 315.

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Bwodpfx Ajrb A Tcofmjw Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Universal Milling Machine MAHO MH 800 Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Clutch speed used Lubricant pump Voltage: 380 V Bjdpfx Afsz Nx Ibjmeww Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T

Condition: used, Machine was regularly serviced, was in operation until recently, with documentation and accessories, an on-site inspection is possible. Bwodoz Ibycjpfx Afmow

Condition: used, Year of construction: 1998, machine/vehicle number: 70603089, Article description Speed: 50–3750 rpm Suspension travel: approx. 100 mm Bwodpfx Afjz Sznpsmjw NEWAL digital display Overall dimensions: approx. 1700 x 1700 x 2200 mm

Condition: used, Year of construction: 1976, x-travel 1200 mm y-travel 400 mm z-travel 460 mm table-size 1500 x 400 mm control konventionell tool adaptor SK40 turning speed range 45 - 2000 U/min quill stroke ja mm weight of the machine ca. 3,2 t dimensions 2,8 x 2,5 x 2,1 m Bwjdpfxszip H Ne Afmow Equipment: - ELESTA digital display - Infinitely variable feed - Coolant system - Horizontal milling attachment - Chip guard - Chip trays - Hydraulic machine vice - Machine light - Documentation

Condition: used, There are five Friedrich Deckel FP 1 machines available. An on-site inspection is possible. Bedjz H Utajpfx Afmoww

Condition: used, Hohner universal stitching head 52/8 - 6er ring eyelet - for round wire No. 24 - 26 - with various accessories acc. pictures condition as shown in the photo Bwjdpefc Rx Tjfx Afmsw

Condition: used, x-travel 780 mm y-travel 220 mm z-travel 410 mm Bwsdpfx Afoupxxnomow table length 1100 mm table width 270 mm spindle turning speed range 40 - 960 U/min spindle taper SK 40 weight of the machine ca. 1,7 t dimensions of the machine ca. 1,8 x 1,6 x 1,8 m

Condition: new, Year of construction: 2023, Various driven holders BMT 45 and 55, radial and axial, Preziflex mounts, suitable for Doosan CNC lathes. All items available multiple times in stock. Bsdpfxjwyp A Is Afmeww

Year of construction: 1983, condition: good (used), 1 Console milling machine Manufacturer: RECKERMANN, Type: KOMBI 900, Year of manufacture: 1983, Serial number: 6367P, Table size: 1,000 x 310 mm, Travel range X/Y/Z: 720 x 220 x 450 mm, Tool holders: SK 50, Heavy-duty machine vise, Spindle speeds: 3...2800 rpm Bsdpfxsh E Du De Afmoww

Condition: ready for operation (used), Year of construction: 2001, Table size: 400 x 800 mm Table travel distances x/y/z: 600/400/400 mm Swiveling vertical milling head, spindle mounting: SK 50 Quill stroke: 100 mm Speed range: 63 - 3150 rpm Feed rate x and y/z: 16 - 800 mm/min / 8 - 400 mm/min Rapid traverse rate x and y/z: 2000/1000 mm/min Bwjdpfx Afjzvm D Esmjw Electrical connection: 380 V, 5.3 kW Space requirement: 2200 x 2150 x 1910 mm Weight: 2200 kg

Condition: used, Control voltage: 42/48V, max. fuse rating: 35A, operating voltage: 380V, rated current: 20/22/24A, control: DECKEL DIALOG 11, an on-site inspection is possible. Bjdpfx Ajz H Utmjfmeww

Condition: used, Year of construction: 1977, Technical details: x-travel: 1050 mm y-travel: 500 mm z-travel: 500 mm spindle taper ISO: SK40 spindle head swivable left - right: 90 ° quill travel: 180 mm range of revolution per miute: 36 - / 18 step U/min feed:: X+Z: mm/min feed:: Y: - 900 mm/min. rapid traverse : X/Z: / Y: 900 mm/min table surface area: 1200 x 550 mm total power requirement: ca. 10 kW machine weight approx.: 4400 kg Bjdpfju Ndd Rox Afmoww dimension machine xH: 3,1 x 2,5 x 2,2 m Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes stepless feed X-axis: Support lengthwise = 700mm; univ. milling table lengthwise 350mm = total lengthwise: 1050mm Accessories: Comparable with the pictures *