Used Twin for sale (3,134)

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Hjdpeykn S Uofx Aagsnl Also includes: Unit is mounted on mild steel frame A video of this mixer is available below. ?v=iV2YFSJEqPc

Condition: used, Year of construction: 2011, Technical details: Hnjdpfxjyz Sdqo Aagjl weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Hnedpfet S Sxgsx Aagsl Screw diameter approx. 370 mm Drive via geared motor

Condition: excellent (used), Risco mixer 450 litre. With forward and reserve and front end discharge. Brand new electrical panel. Hjdpfx Aasumcadegonl

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2002, total length: 6,910 mm, total width: 2,550 mm, suspension: air, tire size: 315/80-R22.5, wheelbase: 5,500 mm, Year of construction: 2002, Equipment: ABS, = Additional Options and Equipment = - BPW axles - Alloy wheels - Air suspension - Drum brakes = Remarks = Hnedeybk Rnopfx Aagol 2002 VAN HOOL 2-axle 20ft tipping chassis with HYVA lifting cylinder, ABS, BPW Eco with drum brakes, twin tires with 315/80-R22.5 tires (L: 11/11mm, 10/10mm; R: 11/11mm, 9/9mm), unladen weight 4,560 kg, maximum gross weight: 32,000 kg, Dutch registration with valid technical inspection (APK) until 19.03.2026 = Further Information = Axle configuration Tire size: 315/80-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: twin tires; alloy wheels; max. axle load: 9,000 kg; tire tread left inner: 70%; tire tread left outer: 70%; tire tread right inner: 70%; tire tread right outer: 70% Rear axle 2: twin tires; alloy wheels; max. axle load: 9,000 kg; tire tread left inner: 60%; tire tread left outer: 60%; tire tread right inner: 55%; tire tread right outer: 55% Weights Unladen weight: 4,560 kg Payload: 27,440 kg gross vehicle weight: 32,000 kg Functionality Body make: VAN HOOL 2B0033 Condition Technical condition: very good Visual condition: very good Identification Registration number: OV-95-ZP Further information Please contact Arne Honingh for further information.

Condition: used, Used approximately 400 litre capacity (product dependent) stainless steel twin paddle mixer. Mixing chamber measures approximately 1,300mm long x 850mm wide x 650mm deep. Stainless steel paddles driven by electric motor/gearbox. Unit includes hydraulic powerpack for tilt discharge. Has local operator controls. Hsdsyi Evbepfx Aagsnl

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. Hnodpfxjyzyudj Aagol This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Cutting height: 200 mm 2 x 45 kW motors Shaft diameter: 65 mm Electric height adjustment Feed speed variably adjustable via frequency inverter Includes an additional 3 saw bushings and many spacer rings Hedpfjxiu Dmjx Aagenl Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time

Condition: used, mileage: 21,800 km, first registration: 06/1999, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: other, suspension: steel, Year of construction: 1999, Equipment: electric window regulation, power assisted steering, = Additional options and accessories = - Hub Reduction - Sper = Remarks = Renault Thomas Sides BS13, Hedpfxsy Awlie Aagsnl 1999, 21,800 km Original!, 4x4 with reduction axles, Fully leaf sprung, Double engine, Cannon can be operated from inside, No registration = More information = Suspension: leaf suspension Front axle: Steering; Reduction: hub reduction Rear axle: Double wheels; Reduction: hub reduction Number of cylinders: 6 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, Hnjdpfxjvfxqyo Aagol 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: good (used), Year of construction: 2009, Conical Twin-Screw Extruder - Manufacturer: WEBER, retrofitted by INDEXT - Model: CE7 - Year: Retrofitted in 2009, originally built in 1982 - Parallel double screws ø51 to 104mm - 5 heating zones on the barrel + 2 cooling zones - Motor: 38kW - Up to 35 rpm Hnodpsy Hpm Tofx Aagel - Up to 250 kg/h depending on material and tooling

Condition: ready for operation (used), Mixer Machine, Twin-Shaft Mixer, Z-Arm Mixer Hedpfx Aju Hknkjagsnl Mixer Machine, Twin-Shaft Mixer, Z-Arm Mixer, Used Equipment Overall dimensions: 1150 x 750 x 1520 mm Weight: 355 kg Hopper size: 530 x 500 x 400 mm Electrical specifications: 400V

Condition: used, Twin Shaft Mixer, Twin Shaft Powder Mixer, Twin Shaft Feed Mixer, Halvor Forberg 2000LH, Used Machine Manufacturer: Halvor Forberg Model: 2000LH Overall dimensions: 2660 x 3280 x 2450 mm Mixing paddle size: 375 x 330 mm Mixer type: Twin shaft Hnjdpfsxt Nuzjx Aagel Bottom plate: Openable – product discharge is pneumatic

Condition: new, For sale: industrial twin screw pump (twin spindle) by the renowned manufacturer Leistritz Nürnberg. The pump is new / stock item, unused – in excellent condition, as pictured. Identification data (from nameplate): • Manufacturer: Leistritz Nürnberg • Type / Series: LN • Model: 48/80-F-C • Serial number: 6812.129 • Design: twin screw pump (twin screw / twin spindle) Features and advantages: • Two intermeshing screws (no metal-to-metal contact) • Very low flow pulsation • Suitable for various media viscosities • High operational reliability and durability Hjdpfeyga U Hsx Aagenl • Bidirectional operation possible • Industrial-grade continuous operation Applications: • Oils and lubricating media • Industrial and process installations • Hydraulics, power industry • Cooling / lubrication systems • Process applications Condition: • New • No damage • Ports sealed with caps • Price listed is for 1 piece.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 Hsdpfx Aaex Dkmgsgenl • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Hodpsmrrwfefx Aagjnl Please note that the photos probably show two different ovens, both are very similar.

Condition: repair required (used), This machine is missing a few items but they are available from manufacturer or can be made locally - stainless steel twin head depositor with stainless steel contact parts - pneumatically operated - max fill weight approx 415g - can dose up 70 shots/min/head Hodpjpyg Rgefx Aagonl

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Hjdpfx Aajm Rhfdogjnl

Condition: excellent (used), mileage: 579,667 km, power: 184 kW (250.17 HP), first registration: 09/2013, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,350 mm, total width: 2,600 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, soot filter, tail-lift, traction control, = Additional Options and Accessories = - External thermometer - Heated mirrors - Leaf suspension - Differential lock - Digital tachograph - Rear doors - Air conditioning - Air suspension - Particulate filter - Radio/CD player - Spare wheel - Reversing camera - Side door - Sun visor - Stability control = Further Information = Technical Information Number of cylinders: 5 Engine displacement: 9,291 cc Axle Configuration Hnjdpfx Aaoyy Iy Eegel Tyre size: 315/70 R 22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Steered; Tyre tread left: 90%; Tyre tread right: 90%; Suspension: Leaf suspension Rear axle: Twin tyres; Differential lock; Max. axle load: 11,500 kg; Tyre tread inner left: 90%; Tyre tread outer left: 90%; Tyre tread inner right: 90%; Tyre tread outer right: 90%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 11,645 kg Payload: 7,355 kg Gross vehicle weight (GVW): 19,000 kg Functionality Tail lift: DHOLLANDIA DHLM.20, tailgate, 2,500 kg Body manufacturer: ECF Wall thickness: 5 mm Maintenance, History and Condition APK (Roadworthiness test): valid until 07/2026 Technical condition: very good Visual condition: very good Identification Registration number: 71-BDD-5

Condition: used, mileage: 56,772 km, power: 308 kW (418.76 HP), first registration: 02/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Operating hours: 2,650h. ASR, BrakeMatic, monotone horn, rear view camera system with 7" colour display, two work lights each at the front and rear, LED beacon front and rear, preparation for central lubrication system, front attachment/weeds brush quick-change system prep, twin engine version with JCB 93KW auxiliary engine (Tier 4), dual-sided debris collection with gross volume of 8 m³, water system approx. 2,150 litres, gas-sprung suction hose arm 200mm, high-pressure washer 100 bar. Hedpfx Aajxpzthsgenl

Condition: good (used), Year of construction: 2006, Gildemeister Twin 42, Year of manufacture 2006, Siemens 840 D control, Turning length up to 210 mm, Spindle bore 56 mm, Main spindle, Counter spindle, 1 x Y axis, 2 x C axis, 2 12-station turrets / all stations driven, Shaft diameter 25 mm, Driven tools up to 6,000 rpm, FMB Turbo 10-72 loading magazine, Hjdpfowcyhtex Aagenl Main spindle collet chuck, Counter spindle collet chuck

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Hodpfx Aeyztagjagjnl Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Second flexible pusher: yes Hedsy Nk Dfepfx Aagonl

Condition: used, machine/vehicle number: 008158, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 120 mm No of Grippers: 9 Second flexible pusher: yes Panel Rotation Station: yes Thin sheet loading: yes Hsdpfjy Nku Dsx Aagonl

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Hedpowxfggjfx Aagsnl Ideal for plastic drums, crates, bins. For price contact seller for more information & a video of the machine operating if required.