Used Rake Angle for sale (7,194)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device Bedpfemck Rysx Acvjwk - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, (15) Angle plates as detailed. 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate 112781 600mm x 500mm 1800mm Angle Plate 112782 910mm x 700mm x 1800mm Angle Plate 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112784 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112785 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112786 900mm x 600mm x 3000mm Angle Plate 112787 1020mm x 1010mm x 4280mm Angle Plate Bwedpfxoyi Tbfs Acvok 112789 800mm x 750mm x 1190mm Angle Plate 112791 600mm x 500mm 1800mm Angle Plate

Condition: used, This listing is for Eppendorf Fixed Angle Rotor FA-45-24-11 Bedpfsyx Uwzsx Acvewk The unit is in full working condition and ready for immediate use The Eppendorf FA-45-24-11 is a high-performance fixed angle rotor designed for efficient sample separation in centrifugation applications. Built for precision, it supports consistent results in research and laboratory workflows, offering durability and reliable operation for demanding environments Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Eppendorf Fixed Angle Rotor FA-34-6-38 The unit is in full working condition and ready for immediate use. Designed for high-speed centrifugation, this rotor accommodates up to 6 x 38 ml tubes and ensures reliable sample separation with precision engineering and durable construction. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Bwjdpfxoyx Ur Eo Acvsk • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, The Eppendorf FA-45-30-11 is a durable fixed-angle rotor engineered for efficient high-speed centrifugation. Designed to accommodate multiple tube formats, it ensures consistent sample separation and reliable performance in demanding laboratory environments. Compatible with select Eppendorf centrifuge models. Bwjdpfoyx S Hmsx Acvsk

Condition: excellent (used), Angle bender Manufacturer: DAKO Bending height: 100 mm Base area: 260 x 225 mm Total height: 215 mm Bedjyxbvwjpfx Acvjwk Weight: 30 kg

Condition: excellent (used), Year of construction: 1979, Ulmia 1725 Precision Sliding Table Saw Precision miter cuts and fine joinery work. Saw blade adjustable in height and tilt. Saw blade swivels from 0-45 degrees according to scale and can be set precisely to the desired cutting height in any position. Tabletop with removable table insert and one guide groove each to the left and right of the saw blade. Slides longitudinally on ball-bearing segments in hardened and ground guide tracks, with return spring. Table size: 1100 x 700 mm Minimum distance from saw spindle to top of table: 60 mm Saw blade height adjustment: 60 mm Max. saw blade diameter: 350 mm Max. cutting height: 115 mm Cutting width to the side of the blade (normal): 360 mm Saw blade bore: 30 mm Table travel (normal): 430 mm Saw spindle speed: 4,500 rpm Motor power: 2.2 kW Height to top edge of table: 880 mm Bsdpsyxx D Ssfx Acvewk Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Clamping surface: 400 x 400 mm Support surface: 300 x 400 mm Clamping surface with 4 horizontal and 4 vertical T-slots each, for T-slot nuts: M12 Bwodpfoxlha Tjx Acvek for slot width: 14 mm Slot pitch: 100 mm Weight: 102 kg

Condition: excellent (used), Working height: 100 mm Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Square steel: 22 mm Bsdpfx Acsydbfhevjwk Round steel: 25 mm Angle steel: 100 x 10 mm Aluminum flat bars: 100 x 30 mm Required space: 500 x 600 mm

Condition: excellent (used), Leg length: 1015 mm Stop leg length: 650 mm Material thickness: 15 mm Bwedpfogzvuqsx Acvek Weight: 17 kg

Condition: used, table clamping surface: 228 x 273 mm 3 T-slots: 12 mm in between 4 x 4 threaded holes: M 8 table height at zero position: 146 mm Space requirement: 250 x 290 mm Weight: 41 kg Bwedpfebbgcxex Acvok

Condition: used, Press height 140 mm Press force 70 kN (7 t) Hydropneumatic drive Compressed air connection 7 bar Air consumption per operating cycle 35 l Length 1,100 mm, Depth 950 mm, Height 1,230 mm Bwodpfx Aoyvgm Aecvjk Weight 550 kg

Condition: used, Year of construction: 2009, Hydraulic operation Profile height up to 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Bedpfxeyu Rw Ie Acvjwk Weight: approx. 450 kg

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Storage location: Nattheim Bodpfovvi Ttex Acvjwk

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Bsdpfxowhzg Ue Acvjwk Location: Nattheim

Condition: used, Year of construction: 1987, cutting dimensions max. 600 x 1000 mm Bodpfxjtqql Io Acvewk plate thickness max. 3 mm cutting angle 1,5 ° side stop electrical adjustable 0 - 1010 mm rear stop electrical adjustable 0 - 610 mm no. of strokes 60 Hub/min total power requirement 14 kW weight of the machine ca. 8,7 t dimensions of machine L x W x H 2,5 x 2,18 x 2,3 m Accessories: sheet metal stacking device on rails

Condition: used, Year of construction: 2006, functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 280 mm, conveyor belt speed: 50 mm/s, total length: 3,300 mm, total width: 650 mm, total height: 2,500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: Panasonic, TAF item number: 1000006169 Manufacturer: Fimatec Year of manufacture: 2006 Overall dimensions (LxWxH) in mm: 3,300 x 650 x 2,500 Width including side panel in mm: 360 Width including drive unit in mm: 650 Side plate height in mm: 200 Conveyor length, total in mm: 4,000 Conveyor length, horizontal in mm: 800 bottom / 200 top Conveyor length, vertical in mm: 3,000 Conveyor width in mm: 280 Bsdpfx Ajyyvqrecvewk Belt type: Plastic, slats Belt width in mm: 300 Belt lugs (lug height/lug spacing) in mm: 50 / 430 Base frame: rollable, height-adjustable Height-adjustable from: 0 to: 80 Running surface: plastic rails Inlet height in mm: max: 360 min: 280 Outlet height in mm: max: 2,510 min: 2,430 Drive: Head drive Motor type: Geared motor Motor data: Panasonic, 50 Hz, 400 V, 0.3 A Motor position: left Conveyor speed in m/s: 0.05 Net weight in kg: 150 Special features: MultiControl MCU988 control unit (constant or programmable cycle timing possible), CEE plug included, cable length: 2m Condition: used / fully functional Functional test: OK

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 27 mm Bedpeyq Nr Nefx Acvjwk -Dimensions: 395/130/H300 mm -Weight: 36.1 kg

Condition: excellent (used), CATALOG NUMBER 7854 Bwsdsyh H A Dopfx Acvok Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: good (used), for sale: several used clamping brackets / boring mill brackets 1500 to 1800mm wide 2500mm high 1250mm deep Mass: 5,8t Load capacity 60t Bwedpfx Aog Sbbxecvek 6 pieces available partly with stairs

Condition: good (used), functionality: fully functional, Machine data versa 204 Dimensions (L x W x H) (mm): 1500 x 1200 x 1500 Weight (kg): 1500 Technical specifications versa 204 Blade length (mm): 200 Variable angle: yes Bwsdpfxeyhxqtj Acvek Angle (°): 30 to 135 Max steel thickness (mm): 4 Max stainless steel thickness (mm): 3 Stroke rate: 60 Table dimensions (mm): 1000 x 800 Motor power (HP): 5.5

Condition: excellent (used), Year of construction: 2010, total width: 1,000 mm, total length: 1,200 mm, total height: 2,350 mm, overall weight: 4,000 kg, 2 matching pieces availebel Cast iron not fabricated with welded construction Made in ITALIA grey cast iron very ridged Number of T slots: 13 Jump from T to T: 170mm T size: 22mm Number of matching pieces:2 Bodpfx Asykprvscvswk Length: 1200mm Width: 1000mm Height: 2350mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Unicontrol 12 Consisting of: Cut-off unit (item A), Tenon and slotted spindle (item C), Transfer belt (Pos. I), profiling spindle (Pos L), profiling spindle (Pos. N), Profile shaving unit vertical right (Pos. P) For the production of individual parts and elements in frame-by-frame or serial production. Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt. Working width 40-140mm (See pressure ruler left 40 - 140 mm) Working height 40-120mm Workpiece length min. approx. 275 mm + 1 x end profile length Long machining: approx. 220 mm + 2 x end profile length Workpiece length max. 3500 mm The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings. Cross machining: Table feed Motor power 0.3 kW (0.4 HP) Pre-set feed speed for cutting, profiling and return 3-25 m/min Vario table with (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without a tool blank. Workpiece clamping by means of a clamping bridge. Operated by a clamping cylinder installed under the table. NC-controlled long fence mounted on the slotting table. Studio window device Swivel angle max. +/- 75° The minimum workpiece length for slanted windows depends on the angle and the width of the wood. Possible part dimensions for slanted window production Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60° only counter processing Commission not documented Bwsdsumci Sspfx Acvok 1)NC automatic angle adjustment for machining angled parts Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining 2) Additional counter-rails

Condition: as good as new (ex-display), Year of construction: 2018, Transnorm angled-belt conveyor 45° 1500-1250-1000 RA1850 Exhibit Make: Transnorm Year of manufacture: 2018 Inlet angle: 45 Length center: 1500 mm Belt width (RB): 1000 mm Frame height: 270 mm Nominal/external width (NB): 1250 mm Conveying speed: 0.717 mm V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Bwsdpsud Dzpsfx Acvok Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2022, Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 NEW Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Bwedpjuf Hx Tsfx Acvsk