Double knife veneer guillotine

CASATI Twinset 3100

Condition: used, Year of construction: 2003, SCM SANDYA 20 model 20 M3 135 calibrating and sanding machine, used Year of manufacture: 2003 Serial number: AE/024903 Maximum working width: 1350 mm Feed speed: 3.5-18 m/min with inverter Working height: 4-170 mm Vacuum bed: 7.5 KW Configuration: Fjdpfoxwbydex Ag Ispl 1st group: grooved steel calibration roller D. 250 – motor 22 KW 2nd group: sanding roller D. 250, hardness 45 SH – two-speed motor 9/11 KW, 1400/2800 rpm 3rd group: combined roller D. 170, hardness 30 SH + segmented elastic pad (46 segments) – motor 11 KW with inverter 4th group: scotch brite finishing roller Bed positioner with workpiece Belt size: 2620 x 1370 mm Blowers for 2nd and 3rd belt Automatic belt centering Electronic control of 1st / 2nd / 3rd roller / pad

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Manufacturer: RAS Type: 74.30 Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Fjdpszhm Nfofx Ag Ijpl Equipment • Controlled back gauge 10 - 1500 mm • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2003, I sell the panel beam saw HOLZMA HPL11/43/22. Year 2003. Fpjdpfx Aszkb T Deg Iol Cutting size 4300x2200mm + back loading table. Cutting height 125mm. Total area covered W.7060mm x D.9490mm 7 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. CE conformity and optimising software included. Very good condition. Available immediately.

Condition: used, Year of construction: 2000, Used MONGUZZI model 3200 hydraulic veneer cutter Fjdpfx Agjy Th Rwj Ijpl Theoretical cutting width: 3200 mm 2 motors Installed power: 10 HP Motorized rear guide with mechanical cutting width indicator REER safety barrier (new) for finger detection – safety level type 4 Machine length: 4400 mm Weight: 3800 kg Overhauled machine, in excellent condition Complies with CE standards Year of manufacture: 2000

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 14 1/min, stroke rate (max.): 14 1/min, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 7,380 kg, total length: 3,840 mm, total width: 1,675 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 6 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 6 mm Maximum cutting length: 3200 mm Blade rake angle: fixed −2° Number of strokes per minute: 14 Back gauge travel: 20–600 mm (standard) Distance between side frames: 3450 mm Table height: 800 mm Motor power: 7.5 kW Weight: 7380 kg Machine dimensions (L × W × H): 3840 × 1675 × 1620 mm Equipment: Controller E21 Motorized back gauge Back gauge with ball screws Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Digital readout of the back gauge position Blade gap adjustment Set of blades Ball transfer units on the table 3 front support arms Front gauge with measuring scale Rear safety guard Front safety guard Illuminated cutting line Foot pedal CE declaration of conformity Manual in Polish Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. Fodpfxsyt E Eke Ag Ijpl If you are interested in other machines, we encourage you to visit our website.

Condition: excellent (used), Year of construction: 1989, HYDRAULIC VENEER CUTTER Brand : TORWEGGE Model : 3200 Hydro Year : 80'S Machine brought up to standard (DEKRA inspection 03/2023), functional, offered as is, without overhaul. A video of our tests July 2024 MACHINING CAPACITIES : - Cutting length: 3200 mm - Max. cutting width: 60 cm - Passage height 100 mm - 50-70 kP/cm² pressure COMPOSITION : - Robust welded steel-mechanical frame - Ground cast-iron support table Front clearance 40cm Floor height (working height): 0.9-1m depending on installation Front lighting - Control panel mounted on articulated bracket - Rear table with 2 auxiliary extensions (PxL) 1x1.35m Electrically controlled pusher guide Fpsdpfxsrx S Ucj Ag Iel Working length 2.12m Distance between supports 30cm Manual precision adjustment Dimension indicator on ruler 2 flow recovery ejectors ELECTRICAL CHARACTERISTICS : - Power supply : 400v.Triphasé+N 50Hz - Installed power: 15 kW approx. (2 motors, hydraulic pump and pusher) Machine supplied with electrical diagrams 2 boxes with knives OPERATOR SAFETY : - Lockable disconnect switch - Mushroom-type stops - Two-hand safety control device - Frontal light curtain - Key lock for blade change - Safety contacts on removable housings - Ejectors at end of cycle to advance workpiece onto table Dimensions for transport (WxDxH): - Main frame: 4800 x 1300 x h.1750 mm. Estimated weight: 3000 Kg - Rear guide, on pallet: 2.20 x 1.20 x h1.00mm Estimated weight: 300 kgs Functional machine offered without overhaul.

Year of construction: 2000, condition: ready for operation (used), Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible. Fsdszka Igjpfx Ag Iepl

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-200-07-9819, Type: KAL210 / EDITION Machine no.: 0-200-07-9819 Year: 2011 Single-sided machine for machining straight workpiece edges. Edge banding and post-processing of various edge banding materials, in through feed lengthwise and crosswise. POWER CONTROL control PC22 Control system Windows PC Hardware: PLC control Integrated stretch control for contact-free control of the machining units Fedpfx Agsyn Ilps Ijpl Operating system Windows XP Industrial PC 10" TFT monitor with touch screen, selection and setting of all necessary production parameters, such as: program selection and workpiece thickness adjustment. PC keyboard and mouse USB connection Network connection Remote control Setting operation, start feed, emergency stop switch Unit equipment: -Release agent application unit -Joint milling unit -Glue unit A20 with 2 rollers -Cutting unit HL84 -Pre-milling unit -Shape milling unit FF32 -Universal milling unit UF10 -Profile sanding unit PN10 -Finishing unit (glue joint sanding unit + polishing brushes) Technical data Minimum workpiece width: for thicknesses 12-22 mm, 60 mm for thicknesses 23-40 mm, 105 mm Workpiece overhang 30 mm Workpiece thickness 12-60 mm Molding material on roll 0.3-3 mm Molding cross-section max: For PVC 135 mm2 For veneer 100 mm2 Molding material strips 0.4-20 mm Edge cross-section for strips 900 mm2 Working height 950 mm Pneumatics 6 bar Power 400 volts, 50 Hz, 3-phase NOTE Subject to incorrectly published technical data.

Condition: used, Year of construction: 2012, For sale: a four-roll CNC-controlled rolling machine, VBM 2000 / 130. The machine is used, has seen little operation, and is in very good condition. It is currently operational and can be inspected and tested on-site. The four-roll rolling machine from the Italian manufacturer PARMIGIANI is designed for precise sheet metal rolling and the production of cylindrical and conical parts. The four-roll construction ensures high accuracy, rapid workpiece positioning, and efficient operation. Technical specifications: Manufacturer: Parmigiani Model: VBM 2000/13 Fpedpfxozd T N Do Ag Isl Year of manufacture: 2012 Made in: Italy Type: Four-roll rolling machine Control: CNC Working length: 2050 mm Maximum pre-bending thickness: 3 mm Maximum rolling thickness (for sheets with Kr=40kg/mm2): 4 mm Diameter of center rolls: 130 mm Diameter of side rolls: 140 mm Overall length: 3300 mm Overall width: 900 mm Overall height: 1200 mm Table height: 950 mm Main motor power: 3 kW Motor power for raising the rolling roll: 1.1 kW Working speed: 5.5 m/min Pre-bending speed: 140 mm/min Supply voltage: 380 Volts Frequency: 50 Hz Weight: 1900 kg Hydraulic drive Industrial heavy-duty construction Suitable for forming cylindrical and conical products Application: Ideal for the production of metal structures, tanks, containers, pressure vessels, ventilation systems, and other metalworking products in the energy sector. If you have any further questions, we will be happy to answer them.

Condition: used, functionality: fully functional, De Stefani MVT edge grinder 1 grinding unit Fedpfx Agjznu D Rs Ispl Maximum workpiece height: 100mm Grinding unit motor: 2.5 kW Self-sharpening grinding unit Manual adjustment of the grinding unit Manual adjustment of the grinding unit angle Grinding unit with oscillation Feed speed adjustable via a variator Feed motor power: 0.74 kW