Used Turbine for sale (328)

Condition: used, Used Siemens type CFR5 G6A single stage gas expansion turbine. System rated approximately 60,000 Nm3/hr gas feed, 55 bar inlet pressure at 145 deg.c. Includes Loher type JKXK-560MR-04A generator rated output of 3035kW at 1509 RPM with connected power load of 2.8MW. Gsdpfx Aasy Aaycoxjbl Additional information available upon request.

Year of construction: 2015, condition: defective spare-parts repository (used), functionality: unexamined, Endurance X29 225kW wind turbine (2015) NOTE: Unexamined, advised gearbox issue Gbjdpfx Aey R S Rcjaxjl

Condition: excellent (used), - Dimensions: 610x1150x1460 mm - Model: TRT 120 - Production per cycle: max. 20 litres + Mixing per cycle: 8 to 16 kg - Theoretical hourly production: 75 to 120 litres/hour - Operating ambient temperature: 16°C to 3°C Gbsdpfx Aaswxu Ruexsl - Air cooling - Pasto multifunction turbine - Weight: 510 kg - Voltage: 380V

Condition: good (used), Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber-dryer -Voltage: 24 V -Quantity: 29x available -Price: per piece -Dimensions: Ø 145/H175 mm Gbedjdwdrgepfx Aaxel -Weight: 2.3 kg/pc.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2109, pressure: 12 bar, power: 814 kW (1,106.73 HP), temperature: 192 °C, Fire-tube steam boiler HKB SHP 1250, 1250 kg steam/hour, 12 bar certified pressure, 814 kW. The listed price is for the boiler in its current condition, but we can offer various additional services. Such as: New insulation, control cabinet, overhaul and pressure test, burner and devices, installation, etc. Gjdpeyu Ikxofx Aaxebl

Condition: used, Storage location: Nattheim Gbjdjvvi E Nspfx Aaxjl

Condition: used, Storage location: Nattheim Gbedpfovvi Haox Aaxjl

Condition: used, Year of construction: 2006, 2006 | Mercedes-Benz Actros 3241 K 8x4 2004 RSP ESE 32 / 7-2 Double Turbine | Used Suction Excavator | 204214 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Gedpfx Aox Rpdmoaxsbl 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 30 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Machine was working at the time of inspection, except as noted. Could not fully test vacuum hydraulic arm, (because of a fault in one of the cylinders). There is some oil residue around the PTO pump. Suction hose diameter 250 mm, max volume flow 3'000 m3/h, max vacuum pressure 47'000 Pa, side tipper discharge, filter system (40 cartridge filter with automatic cleaning, 6000mm range), remote control: yes, main tank size 10 m³, Air compressor system: max 4.5 m3/min, 7 bar 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31334 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: reconditioned (used), We offer a refurbished STANĚK MZ350 turbine. The turbine comes with a 7.5 kW motor. Refurbishment has been carried out using original parts. Blasting, shot blasting, throwing turbine. Gbjdpsy H Akljfx Aaxel

Condition: ready for operation (used), Year of construction: 2005, A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible. Gbsdpjywlpxsfx Aaxol

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Grain mill grinding turbine Stone mill for cereals, legumes and spices Table machine wood Corundum ceramic grinding stone Output: approx. 100 g / minute Degree of grinding: Infinitely adjustable from very fine to coarse Funnel collection approx. 1.3 kg grain Connection 220V, 360 watts Gbsdpsfmcimsfx Aaxel Dimensions: 208 x 242 x 380 mm, WxDxH NEW machine with warranty Visit us at the Milbrandt outlet shop

Condition: refurbished (used), functionality: fully functional, We offer 4 pieces of Schlick turbines – 320 mm, including 7.5 kW motors. Turbines: Schlick ROTO-JET RB500 5.2/4/7.5. Turbine type – 5.2. Abrasive delivery – 140 kg/min. Abrasive outlet speed – 70 m/sec. Turbines after complete overhaul, fitted with original spare parts. Shot blasting, blasting wheel, sandblasting machine. PRICE PER PIECE – 3000 EUR. Godpfx Aajvphf Usxsbl

Condition: new, Year of construction: 2010, Make Voith Model: RWW11 E5 Windrive planetary gear Gjdpfx Aotub Dzeaxsbl Year of manufacturing: 2010, Unused Dimensions LxWxH (mm) 2400 x 1450 x 1700 Weight (kg) ca 6900 Total quantity in stock 3 Country of origin Germany Comments Unused mindmill planetary gear, 3400 Kw power supply needed, n1: 476 rpm / n2: 1500 rpm

Condition: used, Year of construction: 2001, machine/vehicle number: 14873, LODIGE Coating and Enrobing Turbine Type LHC170 Year 2001 Partially perforated drum volume: 550 litres Drum material: AISI 316, K240 polished finish CIP system Gbsdewpwt Hspfx Aaxel Batch size: 165–550 kg Sold complete with: - Turbine - Air treatment unit including: - 2-stage filtration (F8 + H13) - 1 preheating coil (steam) - 1 dehumidification coil (chilled water) - 1 main heating coil (steam) - 1 supply fan - Trolley with Watson Marlow spray pump (5 heads) - Dedusting unit - Air outlet filter - Exhaust fan - Sound attenuator - Electropneumatic cabinets - Siemens S7-300 PLC - Operator panel - PC with Lödige WinCC supervision software - Operator panel language: German and French - CIP skid with Prominent dosing pump - All necessary peripherals for operation: - Loading chute - Discharge chute - Sight glass cap - 5 spray nozzles - Flexible connection pipes for the CIP skid Dimensions: L3000 x W2300 x H2700 mm Weight of turbine assembly: 3 tonnes Complete documentation (in French) included: - P&ID - Drawings - Operator manual - Data sheets - Material certificates - Etc. Full program backup performed prior to machine shutdown.

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, machine/vehicle number: 516950, Basic data: • Manufacturer: BHS Cincinatti • Type: AD 63T • Serial number: 516950 • Year of manufacture: 1999 • Rated power: 11,700 kW • Gear ratio: 1500/7555 • Operating hours: 76,000 hours Last gearbox inspection was performed in 2007; bearing and gear inspection is recommended. Gbedpfx Ajy Drd Asaxsl

Year of construction: 2007, operating hours: 25,300 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 192-237, The LM 6000 gas turbine is a dual rotor aeroderivative turbine connected to a generator via a reduction gear. The nominal power output under ISA conditions is 45 MW. The gas turbine operated exclusively on natural gas. The turbine had run only 25,300 hours before it was sent for factory inspection and conversion at the GE facility. Turbine inspection and PD-PF conversion were completed in 2025. The gas turbine is equipped with the SPRINT system for higher power output at elevated ambient temperatures. Following the PF conversion, the turbine's emission values are compliant with GE standards. Gbsdpfx Aaoy Dq Dusxol This set does not include the hydraulic starter, lube oil system, noise hood, air intake systems, or protection and control system!

Condition: good (used), Year of construction: 2005, Vacuum cleaner motor, suction turbine, wet vacuum cleaner, suction motor -Manufacturer: Ell, suction motor from scrubber dryer Gansow 70 BF 70 -Type: 500W Gedpfxek D Nt Is Aaxjbl -Voltage: 24 V -Quantity: 1 available -Dimensions: Ø 147/H210 mm -Weight: 2.8 kg

Condition: good (used), Vacuum cleaner motor, suction turbine, wet vacuum cleaner -from: scrubbing machine make Gansow Gedpfx Aodwdrhsaxsbl -Number: 17x available -Price: per piece -Dimensions: Ø 145/H210 mm -Weight: 2.7 kg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours Gbodpfx Asytpbisaxol • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: new, Elster SM-RI-X-E G1600 Turbine gas meter Elster turbine gas meter SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³ / h Qmin: 130 m³ / h pmax: 89.5 bar No: 10520813-2014 Pulse generator HF2 162.370 Imp / m³ Manufacturer price: 21.540, - € net Gbodped I Tz Tjfx Aaxel Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), -Dimensions: 510x875x1400 mm -Serial number: 300758E -Condensation: Water -Refrigerant gas: 502 -Water-cooled compressor -Maximum gas pressure: 2000 KPa -Absorbed power: 2.55 kW Gjdpfx Ajwxu R Ujaxsbl -Maximum motor power: 1.90 kW -Protection: IP22 -Minimum water pressure: -Min: 200 (2 atm) -Max: 400 (4 atm) -Power: 5.60 kW -Voltage: 380 V -Weight: 115 kg

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, We offer refurbished Rösler Hurricane H42 turbines - 11 kW. The stated price is per unit. Gbjdpoyy Rybsfx Aaxel

Year of construction: 1997, condition: used, Technical details: Rated capacity: 1100 kVA Revolution per minute: 1500 U/min type of fuel: Wasserstoff / Steam / Vapor max. temperature: 420 Grad Gbsdpfju Nvbujx Aaxol weight: 3,9 t STEAM TURBINE other data: - Power: normal 560 kW and max. 820 kW - P1 64 bar - P2 11,5 bar - 1N = 1500 Ampere - Generator type DSG74-M1-4W; 400 V; - Generator nominal power: 1053 kVA / nominal effective power 820 kW - Turbine is suitable for operation with exhaust steam temperature of approx. 405 °C. - A throughput of 2.8t live steam / h in continuous operation is only possible in load-free condition. Sale of the turbine as described and as is! The performance data given are manufacturer's data. These may vary due to age-related wear! We do not have and do not sell spare parts. For spare parts please contact the manufacturer: Dresser-Rand Siemens !!! i.D. *

Condition: used, Year of construction: 2012, functionality: limited functionality, power: 45 kW (61.18 HP), Steam turbine Manufacturer: Siemens Type: AFA 2.5 Year of construction: 2012 Fresh steam pressure: 4.10 bar Fresh steam temperature: 153°C Fresh steam quantity: t/h Wheel chamber pressure: bar Wheel chamber temperature: °C Exhaust pressure: 0.90 bar Exhaust temperature: 140°C Electrical power: 45 kW Rated speed: 3,000 rpm Quick stop speed: 3,600 rpm Steam turbine with generator and vacuum condenser with pumps, without inspection, as is, without overhaul at current location. Gjdpfsx H Rwyjx Aaxobl bps Consulting GmbH CONSULTING | PLANNING | SERVICE Steam turbines | Power plant systems and components info(at)bps-energie.de

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer a new table blasting machine – high-quality Czech manufacture, with premium materials used in production. Model: TSM 360-1.5 - Rotating table diameter: 1,500 mm Gedew Nbycepfx Aaxsbl - Maximum blasting part height: 550 mm - Total machine height: 3,000 mm - Total machine width: 2,000 mm - Total machine depth: 1,600 mm - 1x throwing turbine – power: 7.5 kW – with frequency inverter The turbine supports both left and right rotation. - Bucket elevator – power: 1.1 kW - Table rotation – power: 1.1 kW – with frequency inverter Table rotation can be manually controlled via button. - Total machine power: 9.7 kW The machine features a frequency inverter for adjustable turbine speed. A major advantage is the ability to switch turbine direction between left and right rotation. Blasting unit is CE-certified. Additional advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, this model stands out as a highly advanced table blasting machine due to its concept and design. (Blasting machine, sandblaster, shot blasting, blast cleaning, sand blasting, blasting equipment).