Used Trumpf Trupunch for sale (413)

Condition: ready for operation (used), Year of construction: 1991, punching force: 15 t, overall weight: 4,300 kg, number of axes: 3, This 3-axis TRUMPF Trumatic 120R was manufactured in 1991. It features a maximum punching force of 150 kN and a machine weight of 4,300 kg. With an estimated operational lifespan of 40,000–60,000 hours, this machine is designed for durability. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 120R CNC punching machine we have for sale. Contact us for further details. • Supply voltage: 380 V • Frequency: 50 Hz Iaedjyn Ddbepfx Aalep • Connected load: 9 kVA • Control voltage: 24 V DC • Required fuse protection: 3 × 35 A • Compressed air requirement: 6 bar • Estimated operating hours: 40,000–60,000 (based on condition and guides)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 40,507 h, punching force: 22 t, travel distance X-axis: 2,500 mm, overall weight: 11,050 kg, controller manufacturer: BOSCH, number of axes: 2, CNC punching machine manufactured in 1995. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 2,500 mm. It is multitool capable and comes with 2 tools in a cassette for commissioning. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details. • Programming system: Trumagraph • Supply voltage: 400 V / 50 Hz • Connected load: 17 kVA • Control voltage: 24 V • Required fuse protection: 3 × 35 A • Compressed air requirement: 6 bar • Multitool capable • Documentation available • Condition: Partially overhauled • Operating hours: 40,507 h Additional equipment Iodpfxjyn Dkze Aaloap • 2 tools with cassette (for commissioning)

Condition: ready for operation (used), Year of construction: 1996, overall weight: 18,000 kg, This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details. • Maximum punching force: 220 kN • Laser power: 1500 W • Laser type: TLF 1500 T Iasdpfxoynk Exj Aalop • Laser nominal power: 54 kVA • Supply voltage: 400 V • Frequency: 50 / 60 Hz • Nominal current: 78 A • Required fuse protection: 3 × 80 A • Control voltage: 24 V DC • Compressed air requirement: 7 – 11 bar • Power supply unit type: IS 11 / 13560 • Power supply output power: 11 kW • Power supply frequency: 13560 kHz • Laser system in operation for approx. 30000–40000 hours

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 6,500 mm, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Process/software features: NoLine, PowerLine, ContourLine, Laser power control, Programmable cutting pressure, Program repeat, Automatic blow-off, Work interruption lighting, Hole-punching function (laser) • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting head: Laser cutting head with 155 mm lens • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Capacitor power 1600 N/cm², Safety with macro stops Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 216 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • LoadMaster Tube 6 m with belt support, 2 grippers • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training Iaedpfx Aaex D I H Delop

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h Ijdpfx Aasyuvcielsap laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin Ijdpjytpimjfx Aaljap - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated Iasdpfx Asytfyzjaljp clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: good (used), functionality: fully functional, Year of construction: 2007, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm]: 2210 Pressing force [tons]: 85 Controller: TRUMPF TASC 6000 Operating hours [h]: 90816 Hydraulics ON [h]: 57234 Standard Equipment: - Rigid machine frame in all-steel construction - Stress-relieved press beam - 4-cylinder upper drive - Block hydraulics with quiet double pump - Backgauge with CNC-controlled X and R axes - Manual upper tool clamping - Hydraulic lower tool clamping - Manual crowning - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control - Standard safety features Iedeytfrwjpfx Aaljap + Increased installation height/stroke +230 mm + 6-axis backgauge system + Hydraulic upper tool clamping + CNC-controlled crowning + BendGuard + 2x support consoles + Short park position (190 mm) + Rear work area lighting + Front work area lighting

Condition: good (used), functionality: fully functional, Year of construction: 2010, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 2720 Press force [t] 85 Control unit TRUMPF TASC 6000 Operating hours [h] 45666 Hydraulics on [h] 13762 - Top drive concept in four-cylinder design Y1/Y2 - Electrohydraulic ram drive with proportional valve technology - Ram position measuring system with deflection compensation via glass scales - Modern block-type hydraulics - Spherical suspension and inclined position of the pressure beam - CNC backgauge system - Safe finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change Isdpfx Aaeytfqmjlsap - Hardened, manual lower tool clamping - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern safety guard - CE mark - Oil cooler clamping device - Increased installation height - 6-axis backgauge - Hydraulic upper tool clamping - Hydraulic lower tool clamping - CNC crowning - CNC I-axis - BendGuard - ACB preparation - 2 support consoles

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 130 t, Bending length [mm] 3230 Pressing force [ton] 130 Control system TRUMPF TASC 6000 Basic equipment: - Sturdy machine frame as all-steel welded construction - Pressure beam with high bending strength - Electro-hydraulic top drive via proportional valves - Modern block hydraulics - CNC backgauge with rack-and-pinion drive for X and R axes, safe repositioning of the backgauge fingers from the front - Upper tool clamping system "New Standard Clamping II", manual - Lower tool holder for EV dies, hydraulic clamping, programmable positioning (2 positions) - Safety device, rear roller safety cover - Control cabinet air conditioning - Network capable Iaedpfxjytfktj Aalep - Manual crowning, centrally adjustable + Increased installation height / stroke +230mm + 6-axis backgauge system + Hydraulic and hardened upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Rear workspace lighting + Front workspace lighting

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 16,566 h, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 4,000 W, CNC Laser Cutting System TruLaser Cell 7040 FKL (L31) 4000 Watt Max. working area (X x Y x Z) in mm: 4000 x 1500 x 750 Isdpfjytfgbox Aaloap Control: Siemens 840D PowerLine Laser power: 4000 Watt Operating hours: 16,566 h Laser beam on: 14,202 h Laser Machine TruLaser Cell 7040, Y1500 (L31) - X = 4000 mm, Y = 1500 mm, Z = 750 mm, B = 750 mm, B = +/- 135°, C = n * 360° - 30m fiber optic cable - Automatic optical recognition - Magnetic coupling - FocusLine - Teach panel with teach software - Network connectivity Machine data acquisition TruDisk 4001 - Power = 4000 W - Beam quality = 4 mm·mrad - incl. laser power control Number of optical outputs Number of core switches Water-air cooler - For TruDisk 4001 Workpiece processing WeldLine Comfort - CutLine Professional - Prepared for laser cutting and laser welding - 2in1 fiber incl. core switch - Technology tables for cutting - ControlLine Motorized welding optics MDE nozzle f = 200 - Adjustable focus position: +30 mm / -70 mm TruTops Cell Basic Configurable control interface, control cabinet Safety equipment Extraction piping device Mobile room extraction unit Compact deduster with 4000 Nm³/h - Incl. spark pre-separator and self-cleaning filter mats CO₂ extinguishing system for 4000 Nm³/h Standard protective enclosure Automatic front sliding door - Incl. 2 control panels Status indicator light Movable hanging control pendant + TeachLine (special feature) - Optical sensor system with light section and incident light measurement allows complete 3D scanning of a measuring point - Coaxial camera integration - Incl. holder and wiring - Adaptation of TeachLine sensor system to MSO welding optics + Pneumatic clamping of rotary axis and counter bearing + Extension of machine body - Surcharge for special machine body and extension 240 mm to the left + Large rotary axis & counter bearing on machine body - Rotary axis and counter bearing supported by floor rail - Max. load capacity 2,000 kg - Max. torque 5,600 Nm - Counter bearing without lift (not even pneumatic) - Rotary feedthrough on counter bearing 8x pneumatic/12x electric - Interface on rotary axis and counter bearing each with support bar with 2x M12 threads and D16 round bolts - Manual clamping + Media feed on machine body + Valve terminal on machine body + Measuring head probe - Incl. holder with yoke plate and wiring - Incl. calibration sphere - Interface for probe

Condition: excellent (used), Year of construction: 2019, The system consists of two identical laser welding units. The system was previously used to manufacture Li-ion batteries (E-Smart). In this process, cell connectors for series connection in battery modules were welded. The cycle time for battery modules in this production was 3-4 minutes. Basic data: Year of manufacture: 2019 Weight: 6021 kg Nominal current: 20 A Connected load: 12 kVA Disc laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and calibration: PRIMES FocusParameterMonitor (FPM) Control cabinet cooling: RITTAL SK 3185830 1x laser source supplying both systems: Trumpf TruDisk 5001, Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Iasdev Iq Tljpfx Aalop

Year of construction: 2023, condition: used, machine/vehicle number: B1703I0727, Press force: 500 kN, stroke: max. 215 mm, overrun time: max. 117 ms, overrun distance: max. 15 mm, machine weight: 5,500 kg Iajdpfeyn Nh Ssx Aalsp

Condition: good (used), Year of construction: 2003, Trumpf Trumatic L3020 Co2 Laser Fully working condition - removed from working factory Working Range X axis - 3000mm Y axis - 1500mm Z axis - 115mm Overshoot range X axis - -16- +88 Y axis - 19 - +61 Z axis - - 2 - +16 Max Travel range X axis - 3104mm Y axis 1580mm Z axis - 117m Control - Trumpf CNC Control based on siemens sinumerik 840D Electrical Connections with TLF 3200 - 73 kVa Fuses (at 400v) - 125A Speed - Max. positioning speed, Parallel to axis - 60m/min Simultaneous - 85m/min Accuracy - smallest programmable increment. Positioning accuracy - +0.1mm Repeatability - +0.03mm Max laser power in cw mode with TLF3200 - 3200W Max material thickness - 20mm Iodjt H Iv Ropfx Aaleap

Condition: used, Year of construction: 2008, Technical details: Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW dimensions L x W x H: 1,05 x 1,28 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Iodpfx Asyt I Axoaleap Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 9,000 h, bending force (max.): 100 t, working width: 3,100 mm, stroke length: 350 mm, overall weight: 8,300 kg, Equipment: CE marking, A TRUMPF TruBend 3100 press brake from 2017, ready for immediate use and in like-new condition. This powerful and reliable machine is ideal for professional sheet metal work, delivering excellent precision and performance. The machine offers a maximum press force of 100 tons and is equipped with an advanced control system featuring graphical visualization. The machine has only 9,000 operating hours. Added benefit: With the purchase of this machine, one week of training at our facility is possible, ensuring you can start immediately and work optimally. Manufacturer: TRUMPF Model: TruBend 3100 Year of manufacture: 2017 Iajdpsybax Ujfx Aalsp For more information or if you have any questions, please feel free to contact us.

Condition: excellent (used), Year of construction: 1994, Hydraulic press brake Fab. TRUMPF Typ. TrumaBend V50 Year 1994 Technical data: Trumpf Make: Trumpf Type: TrumaBend V50 Year of construction: 1994 Capacity: 50 t Effective length: 1270 mm Stroke: 215 mm Operating pressure: 290 bar Voltage: 3 x 400V Rated current: 12.5 A Iaedpsr D Sdgefx Aaljp Connected load: 8.0 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4750 kg Equipment: Control unit - Control system: Delem DA-28 - Pneumatic die displacement - Hydraulic tool clamping top and bottom - Controlled axes: Y1, Y2, X, R - 3 manual stop fingers, pneumatically clampable - Tools: Punch set segmented, straight, 1050 mm, new Die V16, 30° 1000mm Die V08, 30° 1000mm Die V10, 30° 1000mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Iasdpfsxfim Iex Aalep Laser on: 42,130 h

Condition: excellent (used), Year of construction: 2011, TruLaser 5040 Twin Pack! Technical Specifications: Machine: 2D laser machine in tandem configuration CNC control: SIEMENS 840D Laser type: CO2 Working area: 4000 x 2000 x 115 mm Laser power: 6 kW Cutting capacity steel: 25 mm Cutting capacity stainless steel: 20 mm Cutting capacity aluminium: 12 mm Max. workpiece weight: 1250 kg Automatic pallet changer CE marking Electrical equipment for three-phase current: 400 V / 50 Hz Iedpfxeytbfms Aaljap Dimensions (L x W x H): approx. 12,000 x 5,300 x 2,600 mm Weight: approx. 15 t Additional Features: No need to change cutting heads – one cutting head for all sheet thicknesses Laser power up to 7 kW, sheet thickness up to 30 mm TFT colour display Longitudinal conveyor belt Spray device PierceLine FocusLine NitroLine PlasmaLine Laser: CO2 laser TruFlow 5000 with optimized standby mode Maintenance-free turbo radial blower High-frequency excitation Built-in gas mixer Laser control TASC 3 Laser power regulation Laser logbook function Cutting Head: Lens cutting head with 250 mm lens Universal quick-change device (UTI) with bus interface LensLine with condition monitoring ControlLine: Height sensing and external edge detection for sheet material Note: Both machines can also be operated individually Control System: Control: SINUMERIK 840D Automatic shutdown ContourLine FastLine FlyLine Microweld Teleservice via Internet Data Transmission: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction unit Programming: Workshop programming Additional Equipment: Laser power: 1 x TruFlow 6000 laser with optimized standby mode Extended Machine Equipment: 2x nozzle changers 2x BrightLine 2x cleaning brushes Both machines suitable for ambient temperatures up to 43°C The seller accepts no liability for typographical or data transmission errors. The machine's condition—optical, technical, and wear—corresponds to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest Ijdpfx Aaeyrf Dkeloap - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: used, Year of construction: 2009, sheet width 3050 mm plate thickness 6 mm rear stop 10-1000 mm cutting angle 0,5 - 2,5 ° down holder 20 Stk no. of strokes 14 - 23 Hub/min work height max. 900 mm oil volume 140 l total power requirement 11 kW dimensions of the machine ca. 4000 x 2150 x 1900 mm weight 7800 kg Iasdpfxsyk Dhxs Aaljp Equipment: - ELGO control unit type P50 - Automatic cutting angle adjustment - Automatic cutting gap adjustment - electric back gauge - Pneumatic sheet holding device - Light barrier behind the machine - 4 support arms - front finger guard - foot switch - operating instructions Special equipment: - Return to transmitter (sheet metal output to the operator) - Scrap switch - Angle stop 0-180

Condition: used, Year of construction: 1992, pressure 125 t chamfer lenght 3000 mm distance between columns . mm Control CNC type DA 65 R stroke 200 mm safety distance 136 mm rapid traverse - down 100 mm/sec rapid traverse - up 92 mm/sec working feed 1-10 mm/sec weight of the machine ca. 13 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Iajdeyqvc Iepfx Aalop About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, Pressure: 85 t Bending length: 2050 mm Frame gap: 1750 mm Control: DELEM Stroke: 215 mm Throat depth: 410 mm Ijdpfx Ajw D Abrjaljap Total power: 13 kW Weight: 8,750 kg Machine dimensions: 3190 x 2100 x 2375 mm

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: sinumerik 840d, _____ Description: Year of manuf. : 2020 Accuracy : 0,015 mm Technical specifications Axis travel range:X 800 mm, Y 600 mm, Z 400 mm Workpiece machining:CutLine Professional 2D Machining:2D Cutting head camera:available Dimensions:3300 x 1600 x 2200 Iodpfxoyr Uiio Aaloap Axis speed:50 m/min Max. axis acceleration:10m/s² Positioning accuracy:0.015mm Equipment :-Variable clamping system :-Teach panel :-TruDisk 3000 :-Cutting optics adjustment device :-Automation interface

Condition: excellent (used), Year of construction: 2018, laser wavelength: 1,030 nm, power: 5 kW (6.80 HP), Manufacturer: Trumpf Model: TruDisk 5001(6C) Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Isdpfx Aaer Izwmjlsap Beam quality: < 100 µm Central sensor interface: yes OEM laser: yes Output power 1: 100% Output power 2: 100% Output power 4: 100% Beam quality output 1: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 2: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 4: ≥ 4mm x mrad, ≥ 100µm NA01 Active laser power control: yes Live power display: yes Panel computer: yes Processing optics cooling: yes Water connection set: yes Ethernet in user area: multiple Number of occupied fiber links (LLK): 4 Number of intelligent optics: 4 Number of active couplings: 4 Number of couplings: 4 LLK coding (ILN): yes LLK type: LLK-D TLS number: 20-10-03-A105 Additional interfaces: no Parallel interface: yes Interface output 1: Profinet Interface output 2: Profinet Interface output 3: Profinet OPC UA interface: yes VisionLine preparation: yes Number of VisionLine Basic: 2 Number of VisionLine Detect: 0 Number of VisionLine Interface: 1 Number of VisionLine Project: 0 I-PFO preparation: no PFO Smart Teach App: no TLS machine: no TruControl Module Cutassist: no CE/UKCA declaration: Installation declaration with annex