Laser Cutting Machine

TRUMPF L3003 E

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Guodpfer Nfvmjx Amueb Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA Gsdpfxolf Iqnj Amuoub - Model - DDANS 17 l - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2840 mm Measurements depth 9997 mm Measurements height 2285 mm Machine weight 12600 kg Gedpjx D Rx Aofx Amueub Control Unit Brand AMADA Model AMNCF This 3-axis AMADA LCG-3015AJ 9kw + ASLUL TWIN TOWER was manufactured in 2017. It features a laser source AJ 9000, with cutting speeds up to 60 m/min and axis travel of 1550 x 3070 mm. Ideal for precise fiber laser cutting, it includes a 16-station nozzle changer and twin tower storage. Consider the opportunity to buy this AMADA LCG-3015AJ fiber laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: used, Year of construction: 2017, operating hours: 56,681 h, laser power: 4 W, 2017 Laser cutting machine with changing table and pipe cutting function. DURMA HD-FL 3015 BH / IPG 4kW – Manufacturer: DURMA – Model: HD-FL 3015 III BH-IPG 4kW – Year of manufacture: 2017 – Laser source: IPG Gusdevyhczepfx Amuob – Control system: SIEMENS + CAD software + nesting software – Operating hours: 56,681 h Technical data: – Working area: 3000 x 1500 mm – Pipe cutting diameter: Ø 12 – 400 mm – Laser power: 4000 W (fiber laser) Maximum thickness parameters of cutting materials: – Black steel: up to 12 mm – Stainless steel: up to 10 mm – Aluminum: up to 10 mm – Copper: up to 4 mm – Brass: up to 6 mm Additional functions: – IPG fiber laser resonator – Water cooling system for laser source and cutting head – Extraction and filtration system under and above the laser – Double table system – Pipe laser with 4-point chuck and can cut up to 6 m – CAD software – Nesting software – Pipe laser software – Very good condition, annual service performed 2024.12. If you have any more questions, we will be happy to answer.

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM Godpfx Amjx E Eiheusub MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Cutting format (mm): 12000*2500 X-axis travel (mm): 2530 Y-axis travel (mm): 12050 Z-axis travel (mm): 120 Maximum synthetic positioning speed (m/min): 140 Acceleration (G): 1.5 Main unit volume (mm): 15600*3650*1900 Gedpfxswwz Dxo Amuoub Floor area (mm): 16000*5500 Total machine weight (KG): 12500

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Laser on: 42,130 h Godpfx Aexfim Ismusub

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, Danobat CP 1211T Large Capacity Bandsaw Cutting Capacity Dia / Square 1100mm Cutting capacity rectangle 1200mm wide x 1100mm high Fully automatic Godpotv Nadofx Amuoub

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (bevel unit) with oxy-fuel torch Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Gantry length: 11 m Burning table with oscillating conveyor system, including extraction unit Dimensions: 2,000 x 8,000 mm Gedpew Rpvbsfx Amuoub 1 plasma torch with Hypertherm XPR300 power source Automatic gas console Incl. automatic rotating plasma bevel unit Bevel System 2015/350 Filter unit Downflow 3DFP9-SP Power: 9 kW Laser diode 17326ä

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Guodpfx Aowt Sy Asmuob Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.