Laser cutting machine

TRUMPF Trumatic 4030

Year of construction: 1999, condition: ready for operation (used), Workpiece dimensions: 4000x2000x20mm, laser power: 4kW, connected load: 88kVA, nitrogen/ oxygen connection: 30/ 20bar, control system: Siemens 840D, length: 7000mm, width: 3600mm, height: 2300mm, weight: 12.5t. An on-site inspection is possible. Dkodpfx Ahoy T N Ikjgjp

Year of construction: 2011, condition: ready for operation (used), Travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. On-site inspection is possible. Dkedpfx Aewzbbrshgop

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,904 h, laser power: 4,000,000 W, travel distance X-axis: 4,000 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L 4030 was manufactured in 2006. It features a processing area of 4000 mm x 2000 mm and a powerful 4000 W laser. The machine requires a mains supply of 400 V and has a total connected load of 88 kVA. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 4030 CO2 laser cutting machine we have for sale. Contact us for further details. • Processing area: 4000 x 2000 mm • Mains supply: 400 V / 50 Hz • Total connected load: 88 kVA • Control voltage: 24 V • Required fuse protection: 3 × 160 A • Compressed air connection: 7–10 bar • Nitrogen connection (N₂): 30 bar • Oxygen connection (O₂): 20 bar • Operating Hours (NC): 84196 Dedpfx Ahoyu Nq Tjgokp • Operating Hours (Resonator / HP Pump 1): 72564 • Operating Hours (Beam On / HP Pump 2): 30904 • Included Components: 2 Replacement Control Cabinets • Retrofits: Easy Filter Kit (installed 2023) • Measurements (Length x Width x Height): 11.500 x 6.000 x 2.000 mm • Total weight: with TLF laser: 16,000 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Dodpjdqzbrofx Ahgskp Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: new, Year of construction: 2024, 1050 mm 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: Djdpfx Aoq Sz Ahjhgokp - hardened rollers - Motorized rear roller adjustment

Condition: new, Fastech 3-Roll Round Bending Machine FRS 1250 x 140 Technical Specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment motorized lower roller adjustment Dkodpjhzq Dxofx Ahgop 2 x digital display Sheet metal width 1250 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness for pre-bending 5.0 mm Roller length 1250 mm Roller diameter 140 mm Smallest bending diameter 210 mm Weight 1365 kg Dimensions L-W-H 2020 x 900 x 1200 mm Motor: 2.2 kW Equipment: Top and bottom rollers electrically driven Top roller can be pivoted outwards Conical bending device Asymmetrical roller arrangement Self-braking main motor Separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: good (used), I offer here a set from Schechtl Folding bench KS with foot closer and guillotine shear HT 150 Both have a capacity of 1.5mm iron - aluminum significantly more Working length a little over 1.5m Plate shears with depth stop Djdpfxjudbzms Ahgokp guillotine shears with high quality front support with blade (optional spare blade available)

Condition: ready for operation (used), Year of construction: 2018, The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible. Djdjxv Au Tepfx Ahgskp

Condition: new, Year of construction: 2026, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Dsdpfx Ahsizr Rlogskp Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: new, Cesurbend 3-roll round bending machine MRS 1050 x 110 Technical specifications: Special equipment included in the price: motorized adjustment of the lower roll hardened rolls motorized adjustment of the rear roll digital display Sheet metal width 1050 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 1050 mm Roll diameter 110 mm Weight 1080 kg Dimensions L-W-H 1820 x 850 x 1150 mm Motor: 2.2 kW Equipment: Top and bottom roll driven electrically Djdpfshrdiuox Ahgekp Top roll can be pivoted outwards Conical bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable CE marking