Used Treatment for sale (750)

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, FUSO Canter 3S15 with aluminum flatbed and loading crane, available immediately. The vehicle is for rent with an option to purchase. Chassis: Fuso 3S15 Canter - GVW: 3,500 kg, payload (complete vehicle with crane and aluminum flatbed) approx. 600 kg - Manual transmission - Limited slip differential - 2 x 100 Ah batteries - 3,500 kg ball hitch trailer coupling with factory-installed wiring kit - Heated exterior mirrors - Automatic climate control - Radio pre-installation - Reversing warning system - PTO with increased rpm - Battery and AdBlue tank covers - Prepared for battery isolator relay - Continental traction tires 195/75/R16C - Seat covers Aluminum flatbed: - Interior: 2,720 mm x 1,820 mm x 400 mm (L x W x H) - 18 mm floor plate - Floor frame with airline tracks all around - Airline track also in the front bulkhead - Aluminum anodized side panels with fold-out step, easy to remove - Tool/storage box - Work lights - Other flatbed dimensions available upon request Loading crane: with 3 hydraulic extensions (country of manufacture: Italy) - Lifting capacity (manufacturer specs): Max. 995 kg. 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg - Manufactured according to CE directive (EN 12999) - Slewing range 370° (slew limiter 190°) - All hydraulic cylinders double-acting - Hard-chromed piston rods - Pressure relief and load-holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 l) with filter, mounted at crane base - Outriggers extendable on both sides, special support, support width 3.10 m Codpfx Acewrivlevogr - Hydraulic outriggers swiveling 30° and 180°, CE compliant, incl. M.O.L. - Load hook and fastening brackets - On-board power supply 12V - Electronic modules for Danfoss S800 control block (4 functions) - Danfoss S800 control block, 5 functions incl. high-pressure filter - Special outriggers, support width 3.10 m (1 pc) - Surcharge for shortened support legs by 80 mm - Mechanical boom extension N, 1.30 m stroke (7.0 k) - Stainless steel bolts and pipe clamps - Dinitrol treatment (cavity protection) - Zinc primer - Switch for work lights near the control block (factory-installed) - LED work light on knuckle boom (factory-installed) - LED for 2 support legs Optional: Rear view camera with Carplay, spade holder, 90° rope, ladder rack/transport frame for front or rear wall, additional tool/storage box available Errors and prior sale excepted... A/C, automatic climate control, VAT deductible, ABS, electronic immobilizer, central locking with remote control, tow bar, power steering, spare wheel, day cab, crane, new vehicle, emission standard: Euro 6, diesel, rear-wheel drive, excellent condition, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rental option, particulate class: 4 - Green.

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: Cjdpjyhc Irofx Acvegr - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: like new (used), Year of construction: 2017, machine/vehicle number: HMD-G-80-1000, I have a nearly new, immediately available Abel piston diaphragm pump for sale, type HMD-G-80-1000, cast iron construction, manufactured in 2017, recently completely overhauled and repainted, maximum flow rate 70 m³/h, maximum pressure 15 bar, 30 kW engine, complete with new control cabinet, frequency converter, and pressure sensor. Ideally suited for long 1200 or 1500 mm chamber filter presses. Located in 58762 Altena, Germany. Just set it up, plug it in, and let it run… Cjdpfeyxxmgox Acvegr

Condition: used, mileage: 88,300 km, power: 103 kW (140.04 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, For sale here is a well-maintained Volkswagen Crafter Panel Van L2-H2 equipped with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 6d Temp emissions standard * 1 previous owner Cjdpfeyxcirsx Acvogr Equipment: * L2-H2 panel van * Air conditioning * Adaptive cruise control (ACC) * Navigation system * Reversing camera * Front and rear parking sensors (PDC) * Seat heating * Passenger airbag * DAB radio * Emergency braking assist * Truck registration * Electrically adjustable exterior mirrors * Electric windows * 3 seats * Central locking * and much more... Technical data: Permissible total weight: 3,500 kg * Curb weight: 2,090 kg * Payload: 1,410 kg * Towing capacity: 3,000 kg Why choose us? Attractive financing options through our partner bank * Nationwide delivery of your desired vehicle * Fair trade-in options for your used vehicle * Temporary transit plates (5-day registration / export plates) usually available the same day * Pick-up service from airport or train station All vehicles are professionally prepared and hygienically clean! Highlights: Disinfection of interior and ventilation system using ozone treatment. 2-stage exterior polish; if required, paint correction and Smart Repair. All our vehicles have undergone thorough maintenance. Naturally, this includes fresh fluids, new filters, and any other necessary work, so you don’t have to worry. Optionally, we can present the vehicle at an independent testing center or workshop of your choice. We are pleased to have sparked your interest and are available for you around the clock. If you have questions, comments, or special requests, don't hesitate to contact us! More information and insights into our company philosophy available at Special equipment: Storage Package 2, driver/passenger airbags, deactivatable passenger airbag, Discover Media audio navigation system with streaming & internet (touchscreen, USB), Light & Vision package, electrically adjustable and heated exterior mirrors, Driver Assistance System: Adaptive cruise control (ACC), Driver Assistance System: Front and rear parking assist, Driver Assistance System: Surroundings monitoring system (Front Assist) with City Emergency Braking, vehicle without model designation, multifunction steering wheel, side marker lights, emergency call system, digital radio reception (DAB+), spare wheel in driving tires incl. on-board tools and jack, reversing camera, hinges for rear doors with extended opening angle, passenger double bench seat with storage compartment, heated driver and passenger seats, comfort driver’s seat, storage compartment above cab (accessible from load area), rear step bumper, heavy-duty wooden load area lining, additional winter tires (customer specification required) Further features: Convex exterior mirror, left and right, LED indicators integrated in exterior mirrors, rubber floor covering in cab, underbody fairing for improved drag coefficient, dual headlights, dual-tone horn, entry handle on rear left pillar, entry handle on rear right pillar, hill start assist, brake assist (HBA), crosswind assist, electric front windows, windshield

Condition: used, mileage: 88,300 km, power: 103 kW (140.04 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, For sale here is a well-maintained Volkswagen Crafter Panel Van L2-H2 equipped with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German specification vehicle Cedpfx Acjyxch Uevogr * Regularly serviced * Euro 6d Temp * 1 owner Equipment: * Panel van L2-H2 * Air conditioning * ACC adaptive cruise control * Navigation system * Reversing camera * Front and rear parking sensors (PDC) * Heated seats * Passenger airbag * DAB radio * Emergency brake assist * Truck registration * Electrically adjustable exterior mirrors * Electric windows * 3 seats * Central locking * and much more... Technical data: Permissible total weight: 3,500 kg * Unladen weight: 2,090 kg * Payload: 1,410 kg * Towing capacity: 3,000 kg Why choose us? * Attractive financing via our partner bank * Nationwide delivery of your desired vehicle * We accept your used vehicle as trade-in at fair conditions * Transfer plates (5-day / export registration) usually available the same day * Pickup service from airport or train station All vehicles are professionally prepared and hygienically clean! Highlights: Interior and ventilation system disinfected by ozone treatment. Two-stage exterior polish, * if necessary, paint correction and smart repair. All our vehicles also undergo thorough maintenance. Naturally, this includes new fluids, filters, and other work that you shouldn't have to worry about. Optionally, we can present the vehicle at an independent inspection body or workshop of your choice. We appreciate your interest and are available to assist you around the clock. If you have questions, comments, or special requests, do not hesitate to contact us! More information and insights into our business philosophy at Special equipment: Storage package 2, driver/passenger airbags, passenger airbag deactivation, Discover Media audio navigation system with streaming & internet (touchscreen, USB), Light & Sight package, electrically adjustable & heated mirrors, Driver assistance: automatic distance control (ACC), Driver assistance: front and rear parking aid, Driver assistance: area monitoring system (Front Assist) with city emergency braking function, vehicle without type designation, multifunction steering wheel, side marker lights, emergency call system, digital radio reception (DAB+), full-size spare wheel incl. on-board tools and jack, reversing camera, hinges on rear doors with increased opening angle, double co-driver seat with storage compartment, heated driver and passenger seats, driver’s seat comfort version, overhead storage above cab (accessible from cargo area), rear step integrated in bumper, high wood trim in cargo/body area, additional winter tires (customer information required) Other features: Convex exterior mirror, left; convex exterior mirror right; LED indicator lights in exterior mirrors; rubber flooring in cab; underbody paneling for improved aerodynamics; dual headlights; twin-tone horn; rear entrance handle left; rear entrance handle right; hill start assist; brake assist (HBA); crosswind assist; electric front windows; windscreen...

Condition: new, Year of construction: 2023, operating hours: 10 h, !! We would be happy to advise you!! Model name ////: Rotection cartoner Features ////: Double servo feed control, with hot melt station, safety enclosure and safety technology Production orientation ////: Horizontal Conveyor system ////: Fan conveyor belt Carton feed ////: top with active conveyor belt Operator display ////: Touchscreen Drives & control ////: 8 servo motors and PLC control Box length ////: 150-300 mm Box width ////: 120-260 mm Packaging height ////: 50-100 mm Speed ////: 40-60 boxes/min. depending on box size and product weight Recommended cardboard box ////: pre-folded boxes, 250-350g/m³ Consumption ////: approx. 9.5KW Power supply ////: 380 V / 50 Hz/ 3-phase System weight ////: approx. 1000 kg System dimensions ////: approx. 4257 x 1605 x 1823 mm Cgodpfjr E Dpasx Acver System material ////: "304 stainless steel with surface treatment" Hot melt station ////: Required, optional Nordson or Robatech

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Production orientation: Vertical Conveying system: Infeed and outfeed optional and dependent on product Film feed: Rear Forming shoulder: Fixed Operator display: Touchscreen with memory function Drives & controls: 3 servo motors and PLC control system Packaging length: 50–190 mm Csdjq Ikhajpfx Acvegr Packaging width: 50–150 mm (depending on film width) Packaging height: Dependent on forming shoulder Speed: 15–30 bags/min, depending on material, pack size, and product Film width: 110–320 mm Power consumption: Approx. 4.6 kW Machine material: “304 stainless steel with surface treatment” Printer bracket: Suitable TTO or ink wheel printer optionally available at extra charge Delivery time: Current lead time under 10 weeks Z-conveyor system: €8,500 Features: Stainless steel configuration, suitable for the food industry • Application for granules and small parts such as screws • Sectors: Pet food, food (coffee, nuts), metal industry • Simple touchscreen operation with color icons • Safety protection covers • Can be integrated upstream/downstream with other machines • Customer-specific modifications/designs on request • 12-head scale integrated, hopper 0.8L Additional options (on request and at extra cost): • Euro hole punch etc. Production orientation: vertical

Condition: used, mileage: 83,000 km, power: 103 kW (140.04 HP), first registration: 12/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, For sale here is a well-maintained Volkswagen Crafter Panel Van L2-H2 equipped with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 6d Temp * 2nd owner Features: Panel van L2-H2 * Air conditioning * Tow bar * Front and rear parking sensors (PDC) * Heated seats * Heated windscreen * Passenger airbag * Electrically folding side mirrors * Truck registration * Electric side mirrors * Electric windows * Central locking * and much more... Technical Data: Permissible total weight: 3,500 kg * Curb weight: 2,090 kg * Payload: 1,410 kg * Towing capacity: 3,000 kg Why choose us? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit plates (5-day/export registration) usually available the same day * Pick-up service from airport or train station All vehicles are professionally prepared and hygienically clean! Highlights: Interior and ventilation system sanitised via ozone treatment. 2-stage exterior polish. * If applicable: paint correction and smart repair All our vehicles have also undergone a thorough service. Naturally this includes new fluids, filters, and all necessary maintenance, so you don’t have to worry about a thing. Optionally, we can present the vehicle at an independent inspection agency or a workshop of your choice. We are pleased to have aroused your interest and are available to assist you around the clock. Cgodpfoyw Epxjx Acvsr If you have any questions, feedback, or special requests, don’t hesitate to contact us! Further information as well as insight into our company philosophy at Special features: Front and rear tow hooks, driver/passenger airbag, passenger airbag deactivation, Composition Audio system (radio, SD card interface, MP3 playback), Light & Vision Package, electrically adjustable, heated and folding exterior mirrors, wooden load compartment floor, parking assistance system front and rear, reinforced suspension and dampers, lockable glove compartment, rear wing doors with windows, cab interior lights: step lights, partition wall with window in load compartment, wheel covers, smoker package, tyre pressure monitoring system, spare wheel in full size including on-board tools and jack, hinges for rear doors with widened opening angle, heated washer jets, cab seats: double passenger seat with storage compartment and foldable backrest as table, cab seats: heated driver and passenger seats, cab seats: Driver seat Comfort Plus, 12V sockets in cab (4 pieces), 12V sockets in load/passenger compartment (2 pieces), half-height plastic cladding in cargo/passenger compartment. Further equipment: Convex exterior mirror, left; convex exterior mirror, right; LED indicators integrated in exterior mirrors; rubber floor in cab; aerodynamic underbody cladding; dual headlights; dual-tone horn; entry grab handle, rear left pillar; entry grab handle, rear right pillar; Hill Start Assist; Brake Assist (HBA); Crosswind Assist; electric window lifters...

Condition: excellent (used), total power requirement 31,7 kW main drive 7,5 kW Input width 550 mm ca. 25/75 mm ventilator 22kW / 10.800 m³/h Cgodpfjyvvtrjx Acver Industrial shredder or shredder line with carbide knives for shredding various materials such as wood, cardboard, glass fiber mats or similar, e.g. as pre-treatment for recycling processes. The system consists of two infeed conveyor belts, the chipper and a transport fan.

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Cedpfox Sdptox Acvsgr Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request.

Condition: used, mileage: 115,034 km, power: 301 kW (409.25 HP), first registration: 11/2001, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: mechanical, Very well-maintained MAN FE 410 suction and flushing combination body from Assmann with a water treatment system and radio remote control, as well as a box boom, a Wittig vacuum pump with a Uraca high-pressure pump (P3-45) - Assmann combination suction and high-pressure flushing unit - Water treatment (recycling) - Type: 11.0/229 P-WRG III - Wittig Aqualine 2100 vacuum pump, approx. 1700 cbm/h, 200 bar. Codpfjyxcnnex Acvogr - Uraca P3-45 HD pump with 346 l/min - Pneumatic piston extension - Combination cassette boom - HBC radio remote control - 6x4 drive axles - 11,200 liter tank capacity - German vehicle from 1st owner - Leaf spring suspension - Air-suspended cab - Cruise control - Differential locks - Radio - Electric windows - Double H gearshift - Financing is available through our partner banks; we are happy to assist you. We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. Information about accessories is provided without guarantee. Subject to change, prior sale, or errors. We offer and strongly recommend an inspection and testing to ensure that the buyer is not misled about the condition and suitability. Inspections and testing are possible at any time by appointment and are expressly desired.

Condition: used, mileage: 62,000 km, power: 125 kW (169.95 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,546 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, For sale is a well-maintained Ford Transit panel van L3-H2 featuring the highly sought-after 2.0-liter diesel engine. * The vehicle is in good condition! * New TÜV & AU with no defects, valid until 04/2028 * German vehicle * Regularly serviced * VAT deductible * One previous owner Equipment: * Panel van L3-H2 * Air conditioning * Cruise control * Reversing camera * Auxiliary heater * Tow bar with 3,500 kg towing capacity * Increased towing capacity * Front and rear parking sensors (PDC) * Heated seats (driver & passenger) * Passenger airbag * Electrically adjustable exterior mirrors * N1 truck registration * Electric windows * 3 seats * Central locking * And much more… Technical Data: * Gross vehicle weight: 3,500 kg * Kerb weight: 2,400 kg * Payload: 1,100 kg * Towing capacity: 3,500 kg Cgedpfx Aoyv Ufgjcvjr Why choose us? * Attractive financing via our partner bank * Nationwide delivery of your preferred vehicle * Fair trade-in offers for old vehicles * Short-term export number plates (5-day/transit plates) usually available same day * Pick-up service from the airport or station All vehicles are professionally detailed and hygienically clean! Special features: Interior and ventilation system disinfected with ozone treatment; two-stage exterior polish, paint correction and smart repair if necessary. Each vehicle is thoroughly serviced. Naturally, fresh fluids, filters, and all necessary maintenance are included, so you don’t have to worry. Optionally, we can present the vehicle at an independent inspection station or workshop of your choice. We appreciate your interest and are at your complete disposal around the clock. If you have questions, comments, or special requests, don’t hesitate to contact us! More information and insights into our business philosophy can be found at Special Equipment: Passenger airbag, Audio System 21: Digital Radio (DAB / DAB+) with 8" multifunction display, high-mounted rear LED lights, electrically folding exterior mirrors, fixed window in sliding door (right side), vehicle without vinyl flooring in cargo/passenger compartment, rear wing doors with glazing (opening angle 180 degrees), heated rear window, auto-dimming interior mirror, cold-start package, LED cargo area lighting, plastic partition wall with window, fog lights with static cornering light, Seat package 9/15: Driver’s seat (4-way adjustable) - double passenger seat including seat heating, fabric upholstery, 6.5x16 steel wheels, auxiliary heating package 1, electric step under right sliding door Additional Features: Overhead storage in cab, Trailer Stability Program (TSA), electrically adjustable and heated exterior mirrors, integrated turn signals in mirrors, Vinyl floor in cargo/passenger area, on-board computer, entry lighting, electronic brakeforce distribution (EBD), electronic traction control, assist system: hill start assist, emergency brake assist, crosswind assist, heater with recirculation function, body style: high roof standard box, body variant: medium high roof, steering column height/length adjustable, engine 2.0L - 125 kW TDCi KAT, MyKey (2nd programmable key), front and rear parking aid system.

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,895 kg, maximum load weight: 605 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 aluminum flatbed with loading crane available immediately; the vehicle is available for rental with a purchase option. Chassis: Fuso 3S15 Canter - GVW 3,500 kg; payload of finished vehicle with loading crane and aluminum flatbed approx. 600 kg - Manual transmission - Limited-slip differential - Batteries: 2 x 100 AH - Towbar with ball head, 3,500 kg incl. factory-fitted electrics - Heated exterior mirrors - Automatic climate control - Radio pre-wiring - Reversing warning system - PTO with rpm increase - Battery cover and AdBlue tank cover - Prepared for battery cut-off relay - Continental traction tires 195/75/R16C - Seat covers Aluminum flatbed: Cjdeywzygopfx Acvjgr - Internal: 2,720 mm x W 1,820 mm x H 400 mm - 18 mm floor panel - Floor frame with airline rails all around - Airline rail in the bulkhead - Drop sides aluminum anodized with folding step, easily removable - Storage box - Work lights - Other flatbed sizes available Loading crane: with 3 hydraulic extensions (Country of manufacture: Italy) - Lifting capacity (per manufacturer): max. 995 kg; 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg - Design according to CE Directive (EN 12999) - Slewing range 370° (slewing range limited 190°) - All hydraulic cylinders double-acting - Pistons rods hard-chromed - Pressure relief and load-holding valves - Emergency stop - Control block with 5 spool valves - Separate hydraulic tank (33 l) with filter, mounted on crane base - Outriggers extendable on both sides, special supports, support width 3.10 m - Hydraulic outriggers swiveling 30° and 180° – CE, incl. M.O.L. - Load hook and fastening brackets - On-board power supply: 12V - Electric modules for Danfoss S800 control block, 4 functions - Danfoss S800 control block, 5 functions incl. high-pressure filter - Special supports, support width 3.10 m, quantity: 1 piece - Surcharge for shortened support legs by 80 mm - Mechanical jib extension N, lift 1.30 m (7.0 k - Stainless steel bolts and stainless steel pipe clamps - Dinitrol treatment (cavity protection) - Zinc primer - Switch for work lights near control block, factory-mounted - LED work lights on knuckle arm, factory-fitted - LED for 2 support legs - Options: Reversing camera with CarPlay, spade holder, 90° rope, ladder rack/transport frame bulkhead or rear wall, additional storage box available. Errors and prior sale excepted. ... Air conditioning, climate control, VAT deductible, ASR, ABS, on-board computer, front power windows, electric immobilizer, central locking with remote, tow bar, power steering, locking differential, spare wheel, twin tires, cab: short distance, electric windows, work lights, crane, new condition, emission class Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, for rent, low emission sticker: 4 - green, reversing camera.

Condition: used, Year of construction: 2005, machine/vehicle number: M272, Used Filling Monoblock GAI 2405 1500 bph This Monoblock offers, therefore, a highly specialized solution for bottling still wine in glass containers, designed to meet the needs of technical precision and production continuity for industry operators. GAI manufactured this machine in 2005, and it achieves a filling speed of 1500 bottles per hour, which ensures, in turn, high efficiency for medium-capacity production lines.Filling Specifications of the Used filling monoblock GAI The filling system of the GAI 2405 monoblock, meanwhile, delivers high precision in handling the product, maintaining consistent operating conditions. This model, in particular, uses 12 gravity or light depression filling valves, which effectively prevent turbulence or alteration of the still wine during processing. The filling valves, consequently, stay in a fixed position, reducing the risk of contamination or leaks.Rinsing Section The Used Filling Monoblock GAI 2405 1500 bph rinsing system includes 12 grippers that perform a cleaning treatment for each bottle. The system, thus, completes rinsing in a single phase, which removes any residual particles inside the containers before filling. This single-treatment configuration, additionally, optimizes processing time and improves overall speed without compromising quality.Capping Features The capping section of this model of Used filling monoblock GAI supports straight corks and includes one head for cork insertion, which enables the production of still wine in formats of 0.75 L, 1.0 L, and 1.5 L. This head is specifically designed to drive the corks into a flush-fitting position. This feature of operating with straight corks, as a result, ensures adherence to the traditional characteristics of the final product and, in turn, meets specific market demands.Design and Structure The Monoblock features a design that ensures long operational life and easy maintenance. Operators can access each component for cleaning and inspection, allowing for safe and efficient management of the machine. Moreover, the integration of rinsing, filling, and capping sections into a single unit reduces the machine’s footprint, which, therefore, optimizes space in the facility.Production Cycle of the Used filling monoblock GAI This monoblock, likewise, maintains a stable production cycle, limiting fluctuations in temperature and pressure inside the bottles by optimizing control over filling conditions. The Used Filling Monoblock GAI 2405 1500 bph, as a result, synchronizes each stage of the process, minimizing waiting times and maximizing efficiency.Compatibility and Versatility The Used Filling Monoblock GAI 2405 1500 bph adapts perfectly to glass bottle production in various formats, with a capacity range from 0.75 L to 1.5 L. This versatility, in conclusion, makes the machine ideal for medium-volume bottling lines, thus optimizing the production process while, indeed, maintaining high-quality standards. Cgodpfx Acjvgvcvsver

Condition: good (used), Year of construction: 2008, power: 300 kW (407.89 HP), For sale is a high-performance chiller unit from Cofely, including water treatment, optimized for supplying plastic processing machines (injection molding). The system is in good, operational condition. With the division into two separate water circuits (15°C and 22°C), highly efficient cooling of tools and machine components is ensured. All pumps were renewed in 2023. Technical data: - Year of manufacture: 2008 - Pumps replaced: 2023 - Cooling capacity: 300 kW - Application: Chiller for injection molding production (up to 20 machines) - Temperature circuit 1: 15°C (tool cooling) - Temperature circuit 2: 22°C (machine/hydraulic cooling) - Control: Central control cabinet in container - Evaporator dimensions (L*W*H): 3,500*3,500*4,500 mm - Technical center: Installed in a 20-foot container The system is offered ex works (self-collection). Dismantling and delivery can be arranged for an additional charge. Transport and loading can also be organized Europe-wide for an extra fee upon request. Prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist. Trade-in or exchange possible! Cedpoyvy Nwjfx Acvsgr Machinery purchase/sale BUYING/SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell your machine? For further information or to get in touch, please visit our website.

Condition: excellent (used), functionality: fully functional, control type: CNC control, Thank you very much for your inquiry regarding the Faccin 4-roll CNC bending machine, which has seen very little use. The machine will be sold soon due to internal restructuring. It is in excellent condition. Electronically controlled, hydraulic four-roll bending machine Manufacturer: FACCIN, Model 4 HEL/2122 Technical specifications: Number of rolls: Four Roll geometry: Linear guides Working width: 2000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force on the top roll: 100 tons Rated power requirement: 9.2 kW (12.5 HP) Rated maximum rolling speed: 4–8 m/min Machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: For a yield strength of 260 N/mm²: Rolling capacity (full working width): 11 mm Bending capacity (full working width): 8 mm from a minimum pipe diameter of 1,100 mm Rolling capacity (full working width): 8 mm Bending capacity (full working width): 6 mm from a minimum pipe diameter of 286 mm Standard features: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-articulated joint bearings EPS parallelism system Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-quality hydraulic and electrical components Safety pull-cord with emergency stop and CE certification Cgodoywk Uyopfx Acver Central lubrication Cone bending device The machine will be available for sale from the end of April.

Condition: used, mileage: 110,000 km, power: 120 kW (163.15 HP), first registration: 01/2014, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,945 mm, total width: 1,993 mm, total height: 2,725 mm, loading space length: 4,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale here is a well-maintained Volkswagen Crafter Maxi equipped with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 5 emissions standard * 1 previous owner Features: * Maxi panel van * Air conditioning * Electric sliding door * Multifunction steering wheel * Front and rear parking sensors (PDC) * Registered as a commercial vehicle (truck classification) * Electrically adjustable exterior mirrors * Electric windows * Central locking * And much more... Technical data: * Permissible total weight: 3,500 kg * Curb weight: 2,350 kg * Payload: 1,150 kg * Towing capacity: 2,000 kg Why choose us? Attractive financing options through our partner bank. * Nationwide delivery of your chosen vehicle * Trade-in of your old vehicle at fair conditions * Transit license plates (5-day/export registration) usually available the same day * Pick-up service from the airport or train station All vehicles are professionally prepared and hygienically clean! Special features: Interior and ventilation system disinfected with ozone treatment. 2-stage exterior polishing, paint correction, and smart repair as required. All our vehicles have also undergone thorough maintenance. Naturally, this includes new fluids, filters, and any other maintenance items, so you don’t have to worry. Optionally, we can present the vehicle for inspection at an independent testing center or a workshop of your choice. We are pleased to have sparked your interest and are available for you 24/7. If you have any questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our business philosophy at Special equipment: Cgsdpfex Tb Hlex Acver Storage: compartment lid for dashboard top, DIN slot storage above front headliner, terminal connection, RNS 6000 audio-navigation system (front speakers), electrically adjustable and heated exterior mirrors, roof rack mounting rails, entry handle on rear left D-pillar, Hill Start Assist, front grab handles, lockable glove compartment, driver’s cab interior lights: 2 reading lights front, cargo/interior compartment lights: 2 units, cargo/interior compartment: step lighting, front headrests height/tilt adjustable, multifunction steering wheel, matching-size spare wheel, rear door hinges with extended opening angle, electric sliding door right in loading/passenger compartment incl. electric soft-close, double passenger seat in cab, Transport Package, rear step integrated into bumper, high-grade wooden lining in cargo/interior compartment Additional equipment: Storage: flat tray/compartment above windscreen, driver’s airbag, traction control (ASR), entry handle on rear right D-pillar, Brake Assist System (HBA), rear wing doors without windows, Body/chassis: high roof van standard, body version: high roof, 75L fuel tank, high full partition wall without window, side marker lamps, facelift model, 2.0L – 120 kW TDI engine, wheelbase 4325 mm, low emissions according to Euro 5 standard, right-hand side loading/passenger compartment sliding door, cloth seat upholstery, height-adjustable driver’s seat, rear stabilizer, reinforced front stabilizer, steel wheels 6.5x16, gross vehicle weight 3.5 t, additional brake

Year of construction: 2020, condition: used, functionality: fully functional, We offer these used KD pipes, diameter 315 mm, KG 2000 KG wastewater pipes, green, year of manufacture 2020. Approx. 70 m in total, pipe length 5 m, including various bends, Y-pieces, etc. Codpfjyyml Tex Acvegr Temperature range: -20 to 90 °C Sealing material: rubber rings according to DIN EN 681 Color: May green RAL 6017 Material: Polypropylene (PP) Ring stiffness SN: 10 kN/m² Tightness (guaranteed up to): 7.0 bar Chemical resistance (pH range): 2 to 12 pH Thermal conductivity: 0.04 W/(K·m) Coefficient of linear expansion: 0.08 mm/(m·K) Short-term modulus of elasticity: 2500 N/mm² Long-term modulus of elasticity: 450 N/mm² If you have any questions or need further information, feel free to send us a message or call us.

Year of construction: 2018, condition: like new (used), functionality: fully functional, A new system for treating wastewater or condensate. Stored in 2018 and unused. Can be connected and tested if necessary. Cgedowhlr Iepfx Acvor

Condition: ready for operation (used), Year of construction: 2019, operating hours: 13,572 h, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, controller model: 31i-B5, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, tool weight: 8,000 g, number of axes: 5, This 5-axis CHIRON FZ18W was manufactured in 2019, featuring a FANUC 31i-B5 control system and continuous 5-axis control. It boasts a spindle speed of up to 12,000 rpm, a tool capacity of 70, and rapid traverse rates of 75 m/min. Ideal for complex machining tasks with its automatic pallet changer and dual rotary tables. If you are looking to get high-quality milling capabilities consider the CHIRON FZ18W machine we have for sale. Contact us for more information. • Number of axes: 5 (X, Y, Z + 2 rotary axes via pallet/rotary table) • Spindle: • AC spindle motor: 7.5 kW (100% duty), 22.0 kW (10% duty) • Max torque: 140 Nm • Taper: HSK-A63 (DIN 69893) • Drilling capacity: Ø 42 mm Csdoyaz Emopfx Acvegr • Tapping capacity: M30 • Milling capacity: 500 cm³/min (steel E355) • Tool changer: • Type: Fully enclosed chain magazine • Capacity: 70 tools • Max tool Ø: 78 mm (160 mm with free adjacent positions) • Max tool length: 380 mm • Max magazine load: 240 kg • Tool change time: ~0.9 s • Chip-to-chip time: ~2.6 s • Feed rates & dynamics: • Rapid traverse (X/Y/Z): 75 m/min • Acceleration: 0.6 – 1.2 – 1.4 g • Drives: Direct digital drives with absolute measuring system • Machine functions/utilities: • Automatic washdown of work area and fixtures • Automatic centralized grease lubrication • Hydraulic unit: 200 bar • Compressed air treatment with filtration to 0.01 µm • Cooling unit for machine components • Measuring, monitoring, software: • FANUC 3D collision control • Tool monitoring and sister tool management • Electrical & interfaces: • Ethernet RJ45, USB, PCMCIA • Remote diagnostics: CHIRON remoteLine • Data monitoring & OEE: CHIRON dataLine • Compliance: CE Additional equipment (robots, automation, peripherals) • Automation/palletizing: • Automatic pallet changer IWV 0°/180° (change time ~3.5 s) • Rotary table ATU 200, 2 units • Positioning accuracy/repeatability: ±5″ • Max clamping torque: 1,200 Nm • Max load per side (APC): 250 kg • Max weight difference between pallets: 0 kg • Coolant and chip management: • Through-spindle coolant (predisposition) • High-pressure coolant system up to 30 bar • Coolant filtration: Drum filter TPF 350 S (50 µm) • Chip conveyor: Hinged belt • Coolant tank: 230 L • Pump: 250 L/min @ 1.4 bar • Probing/tool control: • Renishaw RLP40Q probe (predisposition) • Laser tool breakage control (Single F1000)

Condition: ready for operation (used), Year of construction: 2019, total height: 2,500 mm, overall weight: 2,700 kg, number of axes: 3, This 3-axis STM WS3040 waterjet cutting machine was manufactured in 2019. It features a large effective cutting area of 3000 x 4000 mm, dual Z-axis CNC for enhanced precision, and is equipped with advanced NUM FLEXIUM plus 3D 5-axis control. Additional highlights include LED work area lighting, a high-pressure Servotron pump, and comprehensive safety technology. If you are looking to get high-quality cutting capabilities, consider the STM WS3040 machine we have for sale. Contact us for more information. Additional equipment • Retrofit between 2020-2023 Machine Benefits Technical Machine Benefits • Quick up feature • High-pressure connection between pump and cutting head • Pressure relief valve • Effective cutting area: 3000 x 4000 mm • 2x z-axis cnc 3d with a and b axes • Clearance height: 300 mm with quick up Codpfx Acex D Sktovegr • 2x stm3d cutting heads with cutting angle error compensation, pivotable up to 68° • Max material thickness: 50 mm • Support surface: 3100 x 4100 mm • 2x electric pre-drilling unit for material Extra Information Pressure Bag Filter for Wastewater Treatment Machine-Specific Data Servotron 40.45+ High-pressure Pump: 4.6 liters/min, 45 kW CNC Abrasive Dosing Unit with Intermediate Container 1600 kg Abrasive Storage Container with Mini Hopper Media Oil Filling, AC Oil/Air Heat Exchanger OneClean Hydrofilter including Automatic Water Level Control for Cutting Tank Water Analysis System Control Unit CNC Control: NUM FLEXIUM, 40 m/min Handheld Control Unit Touch Screen Operation Work Area Lighting via LED Strip Dimensions Machine Depth 3900 mm

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530 HSCI, spindle speed (max.): 28,000 rpm, spindle motor power: 55,000 W, This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Additional equipment • Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type • Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation • Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian • DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector Machine Benefits Technical Machine Benefits • Rapid traverse speed: 90 m/min • Mounting surface: Ø 950 mm / b-tilt range: +10/-110° / c-rotation range: 360° / maximum table weight: 800 kg Cedpfx Acsx D D Tgovjgr • 3d-controller heidenhain itnc530 hsci / operator interface: smart. Nc • Cooling: active cooling for spindle and linear drive • Mpc machine protection control / direct measuring system: with pressurized air cleaning / active cooling: electrical switch cabinet / additional cooling: external compressed air cooling

Condition: used, This listing is for a Millipore Progard TS2 Pretreatment Pack. The unit is in full working condition and is ready for immediate release. The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems. Key Features: Cedpfx Asxxyigjcvsgr - Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification processes. - Chlorine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative damage. - Scaling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and quality. - Organics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time. Technology and Monitoring: - e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring. Benefits: - Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification system. - Enhanced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or processes. - Operational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and downtime. - Applications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 193 kg, SEFA Duplex Pro V3 – Pneumatic Double Platen Heat Press – 2022 Pneumatic double platen / double workstation heat press SEFA Duplex Pro V3, manufactured in 2022, in excellent condition. Machine tested and cleaned, ready for immediate use. Cjdpfx Asyvh Rcscvogr - Delivery no included Ideal for any professional textile marking workshop requiring high throughput and reliable performance. TECHNICAL SPECIFICATIONS - Brand: SEFA - Model: Duplex Pro V3 - Year: 2022 - Type: Pneumatic double platen heat press with lateral swing - Platen size: 40 × 50 cm (16 × 20 in) - Maximum pressure: 625 g/cm² - Maximum temperature: 220 °C - Power: 2,200 W - Power supply: 240 V single-phase - Maximum substrate thickness: 45 mm - Weight: 170 kg - Dimensions: 713 × 891 × 1,079 mm - 3 pressing modes: single platen / semi-automatic / full automatic - Independent pressing time per platen - 10 storable time/temperature programmes - Foot pedal control included as standard - Automatic head translation - ECO mode, standby mode, dual piece counter - Designed and manufactured in France APPLICATIONS Textile sublimation and rigid substrates, heat-seal flex and flock, screen-print transfer, laser transfer, DTF on garments and accessories, DTG pre-treatment drying. CONDITION Tested, cleaned, excellent overall condition. Available immediately. Sold by Manutech-Print, professional reseller of textile printing equipment. Contact: manutech-print.com

Year of construction: 2020, condition: used, functionality: fully functional, The dryer is primarily used for drying sewage sludge or substrate from biogas plants. The material fed into the dryer is swirled in the drying chamber by throw shafts. Exhaust gases from a combustion engine flow around the material, causing the water to evaporate. Daily throughput is approx. 10 t. The dryer is sold complete with all ancillary components such as screw conveyors, control cabinet, auxiliary burner, acid pump, exhaust air dampers, etc. For more details, please contact us directly. Dismantling and delivery possible. The manufacturer can assist with recommissioning. Cjdpfx Ajyx Iztscvogr