Used Treatment for sale (741)

Condition: used, This listing is for 1 of 3 Watson Marlow 630S Peristaltic Pumps Gjdpsxhdtbofx Ai Noiu These units are in full working condition and ready for immediate use A peristaltic pump moves fluid through a flexible tube by sequentially compressing the tube (like a wave) which pushes the fluid forward. Because only the inner surface of the tube contacts the fluid, the pump mechanism is isolated from the fluid — this is useful for: Handling corrosive, abrasive or sterile fluids Avoiding contamination (the pump body doesn’t contact the fluid) Easy maintenance (replace the tubing rather than the pump’s internal components) Watson‑Marlow is a well-known maker of such pumps in lab, process, pharmaceutical, chemical, water treatment, and industrial settings. Typical applications / use cases Because of the flexibility, purity, and control of peristaltic pumps, the 630S is used in: Chemical dosing / metering (acid, base, reagents) Pharmaceutical / biotech processes Water / wastewater treatment Food & beverage (for sterile or food-contact fluids) Laboratory and pilot-scale processing

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m Gijdpfxjmqkt Tj Ai Neu bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR Gijdpfx Asmqkubji Nju • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² Gijdpomqkuujfx Ai Nju tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: used, Year of construction: 1999, Format: 340 mm Equipment: VIVA 340 No. 85, equipped with: 1 paper unwinder (1 m diameter) 1 rotary die-cutting unit with magnetic cylinder, 14 Zoll format length 6 letterpress units with integrated register carriage and magnetic cylinder (14 Zoll format length) 1 Grated exhaust system (600 mm diameter) 1 Winding system (700 mm diameter) 1 Longitudinal cutting/trimming unit 1 UV flexo coating unit with magnetic plate cylinder 7 I.S.T. UV dryers with CMK reflectors and provision for water cooling 1 Rotometrics Hydrajack pressure control system for the main die-cutting unit 1 BST ProMark video web inspection system (model Euroscope) 1 Preparations for COVID-19 treatment Giedpjzcp D Njfx Ai Nsu 1 Plate punching machine 1 Plate bending machine

Condition: used, The unit is in full working condition and is ready for immediate release A Julabo ED bath is a laboratory circulating water bath system that combines a bath tank with an immersion circulator for controlled heating and circulation of liquids. These units are commonly used to maintain samples or materials at a stable, set temperature in a lab environment. Typical Applications Godpfxoy Iwz Is Ai Neiu These baths are widely used in labs for tasks such as: Temperature control of samples during incubation, testing, or reactions Material testing (e.g., plastics, metals) Calibration of thermometers or thermal devices Heat treatment in research and quality control contexts What do E nd D stand for? E suggests an open bath with circulator mounted on a bridge — the immersion circulator sits on top of the bath tank and drives both heating and fluid movement. D designates the controller simplicity level (digital setpoint via keypad with PID temperature control)

Condition: new, axle configuration: 3 axles, loading space length: 12,355 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 608 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: Aluminium * Chassis type: V-chassis Gedpfx Asy Dmv Hji Neiu * Kingpin load (national) (t): 12 * Axle load (national) (t): 8 * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1150 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 110 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 11364 * KC-Value: 0800 * Overall width (mm): 2550 * Volume (m³): 60.8926 * Wheelbase (mm) (WB): 7470 * Overall length (mm): 12355 * Brake version: disc brake * Offset (ET): 120 * Option 1st axle: with lift axle and starting aid * Activation of starting aid via button in truck (mounting of button not included in standard equipment) and by pressing the brake pedal three times * Option 3rd axle: with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping process, can be manually locked via Smartboard as well as switch mounted to chassis * Pneumatic coupling head: European palm coupling * Control console: EBS control on left-hand side in direction of travel, in front of axles * Standard Smartboard * Landing gears: Weweler * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: Rim-mounted sensor * Wheel nut caps: Chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Working light position (operated by switch): 2x LED reverse lights at rear, left and right (on lamp bracket) * Working light position (operated by switch): 2x LED reverse lights at the front, left and right, near landing gears * LEDs in door end crossmember: 2 x 3-function LED * Operation underrun protection: manual * Mudflaps underrun protection: Black with STAS logo * Cylinder tipping angle normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 8130 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Mudflap type: Clear Pass mudguard * Toolbox: 860x520x500 * Air connection: left side in direction of travel, on lamp bracket * Aluminium access ladder: 3 m * Two plastic chocks * Chassis-body catch device: Rubber polyps Body: * Front wall angle (°): 90 * Rear wall angle (°): 90 * Lower chord profile inside angle (°): 90 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads fitted below floor cross-members * Rear wall type: combination door * Rear wall: aluminium * Combination door type: 1/2 - 1/2 with pivoting door end crossmember * Door end crossmember: pivoting design * Slide position: 2 units, left + right * Additional rear wall locking: pneumatic double-acting * Operation of additional lock: automatic during unloading, additionally manual via control on side of instrument panel * Number and position of roof bows: 3 mid bows (evenly spaced) and 1 rear bow (at back) * Position and type of roof bow hinge: right

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 476 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: aluminium * Chassis type: V-chassis * King pin load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 Giedpfx Aey Dmvaoi Neu * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and traction assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via Smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side before the axles * Standard Smartboard * Air and electrical console, passenger side * Landing gears: Weweler steel gear landing gears, type Weweler, with compensating feet, one-sided operation, and 2-speed function * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: rim-mounted sensor * TPMS sensor included * Chrome wheel nut covers with STAS logo * Working lamp position (operated by switch): 2 LED reversing lights at the rear, left and right, mounted on the lamp bar * Working lamp position (operated by switch): 2 LED reversing lights at the front, left and right, mounted near the landing legs * LEDs in door end cross member: 2 x 3-function LED * Underrun protection: manual operation * Tow hooks: 2 pcs left and right * Mud flaps underrun protection: black with STAS logo * Cylinder tipping angle, normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: standard finish * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of mud flaps on mudguard: 2 pcs * Mudguard mud flap type: asphalt * Toolbox: 860x520x500 * Aluminium ladder 3 m - passenger side * Broom and shovel holder * Ferry lashing rings * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber buffer Body: * Front wall tilt (°): 20 * Rear wall tilt (°): 90 * Inner lower belt profile tilt (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads installed under floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with swiveling door cross member * Door leaf opening: right leaf opens first * Swiveling door end cross member * Hinge type: double door hinge * Slide gate: rectangular design * Slide gate position: 1 piece, centred * Grain outlet / dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Fastening of opened door leaves secured by chain * Rear wall gasket with standard rubber seal * Extra aluminium round profile

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 Gedsy Dmvmjpfx Ai Njiu * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain

Condition: reconditioned (used), functionality: fully functional, The Barriquand Steriflow 1341 Autoclave is an essential asset for all food processing industries looking to optimize their sterilization processes. Featuring advanced technology and a precise control system, it ensures uniform heat treatment throughout the entire cycle. This guarantees optimal product safety while preserving taste and nutritional qualities. This model stands out for its high reliability and large capacity, making it perfectly suited for industrial-scale operations. Additionally, its reinforced stainless steel construction ensures durable corrosion resistance, while facilitating cleaning and daily maintenance. The fully automated cycles deliver consistently reliable results and significantly reduce the risk of human error. Its intuitive control panel, combined with highly flexible programmability, allows you full control over temperature, pressure, and processing time parameters. This makes it easy to tailor each cycle to suit a wide variety of products, including canned goods, ready meals, sauces, and jarred foods. Investing in this autoclave means choosing proven technology that complies with European standards, boosting not only your products’ shelf life but also the overall performance of your production line. Gsdjxg Ec Iepfx Ai Nsiu Technical specifications: • Vessel diameter: 1550 mm • Maximum temperature: up to 135 °C • Operating pressure: 2 to 2.5 bar • Power supply: 400 V three-phase • Approximate dimensions: L 834 cm x W 160 cm x H 220 cm

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Giodpfx Aoydh Agei Nsu Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. A selection of features is listed below. Complete equipment upon request. GOOSENECK: * Gooseneck in SNT design to optimize the bed length, approximately 3,700 mm long, with a rear bevel of approximately 1,000 mm x 6° * For SZM (tractor unit): 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * The gooseneck and the rear bevel have a grid flooring with a 5 mm sheet metal reinforcement * 2-inch King Pin * Guide plate on the gooseneck for the turntable, approximately 500 mm wide * Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) * On the gooseneck, one pair of plug-in aluminum sideboards, approximately 400 mm high, in an anodized finish * One LED work light each on the left and right at the top of the front wall, with operation via an on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA: * Loading area, approximately 9,600 mm long, with a rear bevel of approximately 900 mm x 6° * The loading area behind the gooseneck can be hydraulically raised and lowered, approximately 3,000 mm long, with a load capacity of up to approximately 9,000 kg * Continuous grid flooring on the lifting platform and loading area with approximately 5 mm sheet metal underneath as additional reinforcement, designed for point loads TIRES: * 235/75 R 17.5 3PMSF, twin tires. Brand of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle trailing * 3rd axle with electro-magnetic reversing lock, activated via reverse gear and manually * 1st axle with starting assist * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve HYDRAULIC LOADING RAMPS: * One pair of two-part AXS steel ramps with grid flooring, approximately 4,920 mm long and approximately 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted outwards by approximately 235 mm and inwards by approximately 365 mm individually * Strobe lights on the outside of the ramp tips, with a switch next to the ramp operation control * Ramp locking in the driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp and on the ramp tip * Mechanical supports in downpipe design on the sides of the ramps to provide support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM: * Brake system from WABCO EBS-E, in accordance with EU regulations Gsdpfx Aoy Auhhsi Noiu SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection PAINTING: * Trailer: Carmine Red (RAL 3002) * Rims: Silver-grey * Sideboards: Aluminum, natural finish * Wheel hubs: According to axle manufacturer * Lamp panel: Pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, plug-in, approximately 1,600 mm high, including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the bottom edge of the outer frame profile * Attachment option for lashing chains on the inside of the front wall on the left and right, including aluminum trough underneath on the left and right for storing chains or lashing straps * Approximately 12 mm thick DELIGNIT flooring screwed to the back of the front wall * Two pairs of screwable lashing

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 16,000 mm, The centerpiece is a KITZINGER contino 400/2 KLT continuous container washing system, commissioned in 2019, complete with an associated reverse osmosis system. In addition, there is a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system, three modern forklifts, and packaging and securing technology. All systems are ready for operation and will be delivered ex-works from Kerpen. CLEARANCE SALE — COMPLETE PACKAGE OR INDIVIDUAL SYSTEMS Acquisition possible as a complete package or in individual lots. Lease of the KITZINGER system fully paid off — direct transfer of ownership. High-quality brand components (LENZE, EDUR, ELEKTROR, SIEMENS) — attractive resale value. Ex-works (EXW) — dismantling and transport to be organized by the buyer. Complete technical documentation and maintenance history are available. System I — KITZINGER contino 400/2 KLT container washing system Industrial continuous container washing system designed for service providers, with three active washing zones, rinsing, and a heated drying section. The entire machine, which is 16.2 m long, features a high-quality stainless steel construction with double-walled sound and thermal insulation. Manufacturer / Type: KITZINGER Maschinenbau GmbH · contino 400/2 KLT Year of manufacture / Status: 2016 · ready for operation Machine length: 16,200 mm · straight line, zones arranged one behind the other Tunnel dimensions: Width 410 mm × Height 410 mm · passage width 160–410 mm Hourly output: 200–300 containers (60/40) and 200–300 lids Connection: 400 V / 50 Hz / 140 kW (2 control cabinets) Sound emission: ≤ 85 dB(A) in accordance with BGN specifications Premium components (brand-specific — attractive for resale) ▸ LENZE drive system and frequency converters for all zones ▸ EDUR stainless steel centrifugal pumps — Zone 1: 4 kW · Zone 2: 5.5 kW · Rinsing zone: 4 kW ▸ ELEKTROR fan motors — BS2: 2 × 5 kW · BS3H: 3 × 5 kW with 15 kW additional heating ▸ SIEMENS control cabinet components in both control cabinets ▸ POLO band skimmers in washing zone 1 and washing zone 2 Giodozazk Nspfx Ai Nou Three washing zones plus rinsing and drying section Infeed zone 2,000 mm: Stainless steel belts with cams · adjustable side guides · vapor hood Washing zone 1 (2,700 mm): External filter tank 1,000 l · heater 20 kW · 55 °C · 1,500 l/min 1.5 bar Washing zone 2 (2,700 mm): External filter tank 800 l · heater 30 kW · 60 °C · 1,500 l/min 2 bar Rinsing zone 3 (1,800 mm): External filter tank 400 l · heater 40 kW · 65 °C · fresh water cascade Blow-off BS2 (1,800 mm): 2 × ELEKTROR 5 kW · adjustable stainless steel air knives Blow-off BS3H (2,700 mm): 3 × ELEKTROR 5 kW · electric additional heating 15 kW Neutral drain zone: 500 mm with suction port Special features: Completely double-walled insulated · nozzle arms can be removed without tools System II — Filter systems / Reverse osmosis Reverse osmosis water treatment system, which significantly reduces the fresh water volume and feeds it into the closed circuit of the three washing zones. Manufacturer / Type: TopWater 401/1000 — Reverse osmosis system Year of manufacture / Status: 2022 · ready for operation Function: Water treatment, reduction of fresh water consumption In addition, a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system in an SPF cart version is available for the intensive cleaning of smaller and heavily soiled parts. Manufacturer / Type: PERKUTE · RC 122 (Clean-O-Mat SPF cart) Machine no. / Year of manufacture: S 1993 · 2008 Connection: 400 V / 50 Hz · 2

Condition: used, Year of construction: 2006, operating hours: 5,983 h, machine/vehicle number: LC628, Used Tetra Pak A3/FLEX Cap30 Square 1LTechnical Specifications & Performance DataThis used bottling line configured around an A3/Flex aseptic carton system delivers reliable performance for beverage production and industrial packaging. Optimized for 1.0L square cartons with HeliCap 27 closures and compatibility for Cap30, the line integrates filling, cap application, and thermal treatment via a pasteurizer upgraded with a new automation system. Low operating hours make this second hand packaging line a compelling option for cost-effective capacity expansion.Main system: A3/Flex aseptic carton packaging platformPackage format: 1.0L square cartons (A3F 1000SQ)Closures: HeliCap 27; Cap30 compatibilityOperating hours: 5,983.5 h (indicative meter reading)Thermal treatment: Pasteurizer with new automation systemAuxiliaries: Brand new air compressor, 6–8 bar, sized for the whole lineIncluded cap application: TCBP70 moduleLine status: Stopped for strategic reasons; restarted intermittently since October; currently pausedAdvanced Automation & Control SystemsThe pasteurizer has been modernized with a new automation system for improved process stability and ease of operation. The A3/Flex platform is designed for high-repeatability forming, filling, and sealing of cartons with automated cap application. Safety interlocks, emergency stops, and clear operator interfaces support dependable day-to-day running and rapid troubleshooting.Automation refresh: New pasteurizer automation for consistent heat treatmentCap application control: Precise application for HeliCap 27 and Cap30Changeover support: Quick adjustments between compatible closures and 1.0L square formatOperator safety: Guarded access and emergency stop circuits typical of modern packaging machineryProduction Line Integration CapabilitiesEngineered for inline operation, the system integrates forming/filling/capping with downstream thermal treatment and utilities. The included air compressor supplies the pasteurizer, A3/Flex module, and downstream equipment, simplifying installation and ensuring stable pneumatic performance across the production line.Inline configuration: A3/Flex with TCBP70 capper and pasteurizerUtilities integration: Centralized compressed air (6–8 bar) for the entire lineFormat focus: 1.0L square cartons, with closure flexibility (HeliCap 27, Cap30)Application: Industrial packaging and beverage production in aseptic carton formatMachine Condition & Maintenance HistoryThe line is reported in very good condition with low cumulative hours. It was stopped for strategic reasons, restarted intermittently since October, and is currently paused. The pasteurizer features a new automation system, and the line includes a brand new air compressor to support reliable pneumatic supply.Condition: Very good Gijdpfxoy N Aaxs Ai Nsu

Condition: excellent (used), functionality: limited functionality, Year of construction: 2000, For sale: High-quality Liebherr concrete mixing plant in excellent condition – including BIBKO wastewater treatment system A used, excellently maintained concrete mixing plant from the renowned manufacturer Liebherr is for sale. The plant impresses with its low operating hours, complete technical documentation, and original delivery condition – all components come from the manufacturer itself. Important addition Also included in the offer is a wastewater treatment system from BIBKO Umwelttechnik & Beratung GmbH. This allows for environmentally friendly and economical reuse of residual and wash water, which not only reduces operating costs but also meets the ecological requirements of modern production processes. Main technical data Type: Ringtellermischer R 1.0 Practical mixing capacity: 1.0 m³ solid concrete per batch Efficient filling: A 6m³ truck mixer is filled in only 6 batches Theoretical mixing capacity: 50 m³/h Practical mixing capacity: 40 m³/h Aggregate storage Star storage: 1,200 m³ total capacity Active storage: 65 m³ Number of aggregate components: 5 Cement silos 2× cement silo at 40 t each with overfill protection 1× two-piece cement silo at 80 t with overfill protection Condition of the plant Commissioning: 2000 Out of operation: since 2006 Operating hours: approx. 3,500 (estimated) Condition: Very good – minimal use, excellently maintained Previous owner: First owner Originality: All components original from Liebherr Documentation: Fully available (electrical diagrams, foundation plans, structural analysis, etc.) The solid and well-thought-out construction of the plant enables easy disassembly and reassembly thanks to the predominantly bolted design. The control cabinets are connected to each other via plug connections – for details, please refer to the attached PDF documents. Additional service upon request: Giedpfxjwlwruo Ai Nou We are happy to support you in realizing your project with experienced partner companies for: Dismantling and reassembly Electrical commissioning (industrial electronics technician) Organization of transport with reliable forwarding agents This way, your new plant can be quickly and professionally put into operation at a new location. Interested? We look forward to your inquiry and are always available to answer any questions you may have!

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Gijdpsum Uflsfx Ai Neu Powder curing oven Conveying technology (cycle process) Electrical control system

Condition: good (used), Salmson Priuxmaster D4080 Circulating pumps 4x Gijdoqqhhqspfx Ai Nou

Condition: excellent (used), functionality: fully functional, power: 104 kW (141.40 HP), overall weight: 2,400 kg, fuel type: diesel, axle configuration: 1 axle, emission class: euro5, Year of construction: 2019, operating hours: 511 h, Delivery rate: 10.9 to 9.7 m³/min Engine manufacturer: John Deere 4045HCF05 Engine power: 104 kW Emission stage: V Compressor control: Xc 2003 Dimensions: 4,940 x 1,807 x 1,960 mm (L x W x H) Fuel tank / AdBlue capacity: 168 / 17.6 liters Maximum weight: 2,400 kg Giedpfx Ajy Sz Sloi Nju Compressed air treatment system consisting of: compressed air aftercooler, water separator, and PD filter Operating pressure: 5 to 14.2 bar Hitching device: car trailer hitch ball coupling 50 mm / DIN towing eye

Condition: new, Year of construction: 2021, machine/vehicle number: PST32, Used Alfa Laval Flexitherm mini flash pasteuriser 15 HL-HTechnical Specifications & Performance DataThe Flexitherm Mini is a compact flash pasteurizer module engineered for precise thermal treatment of beverages within an industrial packaging environment. Manufactured by Alfa Laval in 2021, this skid-mounted system combines efficient heat exchange with automated control to stabilize product quality before filling. Optimized for small to mid-scale beverage production, it offers a reliable solution for breweries and beverage processors seeking second hand or never-used equipment that integrates easily into a used bottling line.Manufacturer: Alfa LavalModel: Flexitherm MiniYear: 2021Pasteurization Type: FlashCapacity: 5–15 hl/hMain skid dimensions (L×W×H): 2800 mm × 2000 mm × 2300 mmIncluded components: Main skid with integrated control panel, external pump, and buffer tank (~20 hl, approx. 1200 mm diameter × 3500 mm height)Advanced Automation & Control SystemsThe integrated control panel provides centralized, user-friendly operation for temperature profiles, holding times, flow, and alarms. The automated control strategy helps maintain consistent pasteurization units with accurate heat balance and stable setpoints. Operator guidance, trending, and recipe handling support repeatable results across batches. Protective interlocks and alarm logic help safeguard the process and equipment during start-up, operation, and CIP.Production Line Integration CapabilitiesThis flash pasteurizer integrates upstream with storage or bright tanks and downstream with filling, labeling, and capping on a complete bottling or canning line. Its compact footprint simplifies retrofit projects in beverage production facilities and can be deployed as a standalone thermal treatment skid or integrated with existing CIP systems and factory automation. Suitable for PET and glass bottle workflows as well as canning operations, it supports flexible beverage production configurations.Machine Condition & Maintenance HistoryThe unit was assembled and tested, but never used in production. It is in pristine condition with full technical documentation and the original invoice available. Its preserved state and comprehensive paperwork streamline commissioning and validation for immediate deployment in a second hand or refurbished used bottling line.Operational Performance & VersatilityDesigned to deliver stable flash pasteurization performance, the Flexitherm Mini provides consistent product heating, precise holding, and effective regeneration for energy efficiency. The included buffer tank enhances line stability during filler stops and restarts, reducing product losses. Its compact design is well-suited for beverage production environments focused on quality assurance, microbiological stability, and efficient changeovers.Installation Requirements & Site PreparationThe skid-mounted layout simplifies placement and connection, minimizing on-site assembly. Plan for suitable floor space based on the listed dimensions and allow service access for valves, instrumentation, and heat exchangers. Utilities typical... Gisdpfx Aijzb Ik Eo Neu

Condition: used, first registration: 03/2021, - Simple, cost-effective separation process - Low water consumption, conserving resources - No complex wastewater treatment required - High purity of separated materials - Robust and low-wear machine design Gedpfxewutyae Ai Noiu - Compact dimensions with high separation efficiency - Low operating costs per ton of finished product - Short changeover times from working position to transport position - Compact transport dimensions and easy transport via hook lift truck The screening machine (SM 518, SM 620) must be equipped with the following features: - Additional hydraulics, 60 l / 200 bar - Electrical connection 24V (1x for reversing control of the conveyor screw – wood, 1x for emergency stop switch at GT130A) Additionally, an external water supply must be available.

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. Godpfszba Nyex Ai Njiu The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, FUSO Canter 3S15 with aluminum flatbed and loading crane, available immediately. The vehicle is for rent with an option to purchase. Chassis: Fuso 3S15 Canter - GVW: 3,500 kg, payload (complete vehicle with crane and aluminum flatbed) approx. 600 kg - Manual transmission - Limited slip differential - 2 x 100 Ah batteries - 3,500 kg ball hitch trailer coupling with factory-installed wiring kit - Heated exterior mirrors - Automatic climate control - Radio pre-installation - Reversing warning system - PTO with increased rpm - Battery and AdBlue tank covers - Prepared for battery isolator relay Gisdpfx Ajwrivloi Nou - Continental traction tires 195/75/R16C - Seat covers Aluminum flatbed: - Interior: 2,720 mm x 1,820 mm x 400 mm (L x W x H) - 18 mm floor plate - Floor frame with airline tracks all around - Airline track also in the front bulkhead - Aluminum anodized side panels with fold-out step, easy to remove - Tool/storage box - Work lights - Other flatbed dimensions available upon request Loading crane: with 3 hydraulic extensions (country of manufacture: Italy) - Lifting capacity (manufacturer specs): Max. 995 kg. 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg - Manufactured according to CE directive (EN 12999) - Slewing range 370° (slew limiter 190°) - All hydraulic cylinders double-acting - Hard-chromed piston rods - Pressure relief and load-holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 l) with filter, mounted at crane base - Outriggers extendable on both sides, special support, support width 3.10 m - Hydraulic outriggers swiveling 30° and 180°, CE compliant, incl. M.O.L. - Load hook and fastening brackets - On-board power supply 12V - Electronic modules for Danfoss S800 control block (4 functions) - Danfoss S800 control block, 5 functions incl. high-pressure filter - Special outriggers, support width 3.10 m (1 pc) - Surcharge for shortened support legs by 80 mm - Mechanical boom extension N, 1.30 m stroke (7.0 k) - Stainless steel bolts and pipe clamps - Dinitrol treatment (cavity protection) - Zinc primer - Switch for work lights near the control block (factory-installed) - LED work light on knuckle boom (factory-installed) - LED for 2 support legs Optional: Rear view camera with Carplay, spade holder, 90° rope, ladder rack/transport frame for front or rear wall, additional tool/storage box available Errors and prior sale excepted... A/C, automatic climate control, VAT deductible, ABS, electronic immobilizer, central locking with remote control, tow bar, power steering, spare wheel, day cab, crane, new vehicle, emission standard: Euro 6, diesel, rear-wheel drive, excellent condition, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rental option, particulate class: 4 - Green.

Year of construction: 2001, condition: used, The line is suitable for high-quality mono film production with automatic thickness control, IBC cooling, and full surface treatment capability. Single-layer blown film extrusion line based on a 120 mm extruder with a 30:1 L/D ratio and water-cooled grooved feed section. Die Head • Model: TE594 • Die diameter: 350 mm • Die gap: 1.5 mm Metering System • 4-component gravimetric system (Octagon configuration) Cooling & Control • Plast-Control GmbH Procon automatic air ring & profile control Gisdpjzcz Rujfx Ai Nju • K-Design GmbH USBC-4-G2 IBC with WR-4 width control Corona Treatment • AFS G100S • Double treater station, 2600 mm width Take-up & Winding • 2800 mm take-up and winding unit • Oscillating take-up with gusset boards • Erhardt+Leimer GmbH web guiding system • 3” and 6” air shafts Recently replaced (less than 12 months of use, original Macchi parts): • Main motor • Gearbox • Screw & barrel • Mixing tip • Grooved feed section

Condition: new, functionality: limited functionality, Year of construction: 2025, control type: manual, Equipment: CE marking, documentation/manual, OMEC 4-Roller Mechanical Symmetric Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand new, CE certified. Made in Italy. Double pinch. Top and bottom rollers powered with equal torque. Side rollers motorized for upward/downward movement. Front-opening top roller. Special bearings for side rollers. External lever to control roller inclination. Sheet clamping with bearing-actuated device. Two-pedal foot control. Electrical panel compliant with CE standards. Millimeter indicator for sheet clamping position. Standard equipment included with the plate rolling machine: - Frontal conical device on top roller. - No. 2 digital displays for the side roller positions. - No. 1 digital display for the motorized sheet clamping. - Grinding/Turning of rollers after hardening treatment. - Roller hardening. Gsdpfey E Schex Ai Nsiu - Side sheet loading table with sheet centering stops, marked in mm. Working length: 1530 mm. Top and bottom roller diameter: 90 mm. Side roller diameter: 95 mm. Plate thickness: 1.5 – 2 – 2.5 mm. (1.5 x D / 3 x D / 5 x D). Roller hardness: 55/60 HRC, 2 mm case depth. Installed power: 1.8 kW. Dimensions: 2290 x 750 x h 1150 mm. Weight: 690 kg.

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-Roll Mechanical Plate Rolling Machine. Available for immediate delivery unless previously sold. Model: FX4.90.1330. Double pre-bending. Working width: 1330 mm. Top and bottom roll diameter: 90 mm. Lateral roll diameter: 95 mm. Plate thickness capacity: 2 – 2.5 – 3 mm. (1.5 x D, 3 x D, 5 x D) Top and bottom rolls are motorized with identical power output. Side rolls are motorized for vertical movement (up/down). Front opening for the top roll. Rolls are induction hardened to HRC 55/60, 2 mm depth. Special bearings for the side rolls. External lever for roll tilt adjustment. Sheet clamping with bearing-equipped device. 2-pedal foot control. Electrical cabinet compliant with CE regulations. Millimeter scale for sheet clamping readout. 4-ROLL MECHANICAL PLATE ROLLING MACHINE with complete double pre-bending and front-release system. The top roll is stationary, while the lifting/lowering movement is applied to the side and lower rolls. Sheet clamping is simple: after inserting the sheet between the top and bottom rolls, the bottom roll lifts to secure the sheet. Power: 1.8 kW Dimensions (mm): 800 x 2100 x H 1300 Weight: 625 kg Machine includes: Giodpfx Aisfh Skps Nsu - Front conical bending device on the top roll. - 2 digital readouts for side roll positions. - Roll grinding/turning after hardening treatment. - Roll hardening.