Used Transfer Press for sale (15,482)

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display Pgodpfexaakgjx Ac Ajt - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories Pgsdjgvkmrepfx Ac Ast hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: good (used), pressure 100 t punching cross-cut in cmm 40.0 in 22.0 mm ST stroke 120 mm column arm 760 mm total power requirement 8.5 kW weight of the machine ca. ca. 3.800 kg dimensions of the machine ca. ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system "MUBEA MATIC 82" * Travel range in X and Y axes * With "FAGOR" control unit * Includes large support table * Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system Psdpfozn Ahkex Ac Ajgt

Condition: new, pressure 20 t Pedpfx Aexabrrjc Aegt throat 200 mm stroke 0 - 50 mm table: 360 x 550 mm table: 140 mm - Bohrung no. of strokes 160 Hub/min bore 35,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 240 mm total power requirement 2,2 kW weight 1.250 kg range L-W-H 1310 x 1250 x 1860 mm

Condition: used, Year of construction: 1991, pressure 70.0 t punching cross-cut in cmm 27 in 20 mm punching cross-cut in cmm 32 in 14 mm work height max. 1060 mm column arm 500 mm weight of the machine ca. 1500 kg. total power requirement 7.0 kW Pgodpexabu Tjfx Ac Aet range L-W-H 1550 x 1200 x 1950 mm good / well-maintained condition (!!) New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 Pedpfx Acexacifs Asgt - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 11549, functionality: fully functional, power: 12.8 kW (17.40 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 120 t, table width: 800 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,000 mm, year of last overhaul: 2024, Press 1600x800 mm – 120 T Press force: 120 T Dimensions: 1600x800 mm Vertical opening (daylight): 1040 mm Machine number 11549 Year of manufacture 1983 Pgedpfjztxliox Ac Aet Busse electric heating plates (2024) - 12.8 kW electric - Maximum temperature: 180 °C Inspected by DV Hydraulics in 2024

Condition: ready for operation (used), Year of construction: 2010, Brand: DIXI Model: 60 SD Year of manufacture: 2010 Pressing force: 60 tons Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of filling opening: 115 cm wide x 80 cm deep x 55 cm high Pgedpfx Aez Az Eloc Ast The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited headroom. Video available upon request!

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, pressing force: 40 t, stroke length: 200 mm, total length: 1,600 mm, total width: 1,520 mm, total height: 2,450 mm, overall weight: 4,000 kg, Equipment: documentation/manual, safety light barrier, Hydraulic press brake Manufacturer: BYSTRONIC, Type: Xpert 40/1030 Year of manufacture: 2019, Podpfez A Ex Sjx Ac Aegt unused, originally packaged machine!!! Technical data Manufacturer: BYSTRONIC Type: Xpert 40/1030 Year of manufacture: 2019 Capacity: 40 t Hours: 0 Bending length: 1030 mm Stroke: 200 mm Distance between columns: 1060 mm Motor power: 7.5 kW Dimensions: L 1.52 x W 1.60 x H 2.45 m Weight: 4 t Equipment • 6-axis back gauge • Hydraulic clamping, top and bottom • RF-A tool holder, top • Height-adjustable display ByVision Bending with 22-inch Full HD touchscreen • Support table • Ergo LED work area lighting • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver • OPC Interface Bending • Bending curve generator • Automatic tool overload protection • Rear sliding door with electric monitoring • Ergo foot switch • Tool package All information is without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250009, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Pjdjz Dh Ifopfx Ac Aegt Viewing under power possible at any time by appointment!

Condition: new, Working width 3500 mm Working height 2300 mm Psdpfx Ajd Rzc Rec Ajgt Number of cylinders 4 St.

Condition: new, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg Pedpfxsu Uvale Ac Aegt pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: new, 0 2750 mm Pgjdpfxjxmk D Rs Ac Aot Working height 2500 mm

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 73.331.611.504, functionality: fully functional, power: 18.5 kW (25.15 HP), pressing force: 175 t, stroke length: 265 mm, throat depth: 450 mm, working width: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Max. working width: 3,050 mm Frame distance: 2,600 mm Overhang: 450 mm Max. stroke: 265 mm Crowning system: CNC-controlled Number of axes: 3 Axes: Y1, Y2, X Back gauge depth: 1,000 mm Ram holder: Standard Tool holder type: European Style MACHINE DETAILS Pgedpfxszxcf Re Ac Aot Drive system: CNC Control system: Durma Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 4,250 x 1,950 x 2,700 mm Weight: 10,520 kg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: reconditioned (used), Year of construction: 2014, Working width 4000 mm Working height 2550 mm Number of cylinders 6 St. Dimensions (L/W/H) 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for "mortise and tenon" corner joints - hand control for manual pressing mode Pgjdpfjzpblkjx Ac Ast - 1 central pressure beam (accommodates heights up to 2550* mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure plates (for triangular/pointed windows) - Surcharge for minimum dimensions - All pressure plates and abutments faced with plastic - Control cabinet located on the inside of the left base leg - Press can be completely disassembled if required (price on request!) - Finish: RAL 7035 Light Grey and RAL 7016 Anthracite Grey Image shows an archive photo of a delivered press. No original photos available yet. (Technical specifications provided by the manufacturer – subject to change/no guarantee)

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,860 mm, total width: 1,850 mm, Two-color offset printing press Heidelberg Speedmaster 52-2 Year of manufacture: 1998 Number of impressions: 63 million Equipment: Heidelberg CPTronic Heidelberg suction head with lifting/dragging suction grippers Heidelberg Autoplate with Heidelberg register system Alcolor dampening system Numbering and embossing unit Interface adapter for connecting external devices Largest sheet size: 37 x 52 cm Smallest sheet size: 10.50 x 14.50 cm Max. printing area: 36 x 52 cm Max. printing speed: 15,000 sheets/hour Pgsdpezwhbbjfx Ac Ajt

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 5-048.045, filter area: 84 m², filter pressure: 15 bar, cake thickness: 30 mm, total width: 1,820 mm, total length: 5,820 mm, total height: 2,550 mm, warranty duration: 12 months, year of last overhaul: 2026, number of chambers: 40, control voltage: 24 V, Equipment: documentation/manual, safety light barrier, For sale is a fully overhauled bridge-type chamber filter press from Passavant. The pictures were taken before the overhaul. Chamber filter press – Manufacturer: Passavant with plate thickness: 76 mm, made of PP cake thickness: 30 mm volume: approx. 1160 l useful length: approx. 2800 mm dimensions: 1200x1200 mm overall dimensions: 5820x1820x2550 mm (l x w x h) tare weight: 2700 kg closed filtrate discharge Pgsdpfx Acsz D Eare Ast plate transport: electric hydraulics: electric Please let us know if you are interested in this press. We will be happy to provide you with a customized offer. Price upon request.

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 350, total width: 900 mm, total length: 1,845 mm, total height: 2,015 mm, overall weight: 460 kg, volume flow: 2 m³/h, power: 0.64 kW (0.87 HP), Equipment: documentation/manual, For sale is a new, unused screw press from EKOTON. Type: MDQ 101 Serial number: 350 Date of manufacture: 2017 Weight: 460 kg Dimensions: 1845x900x2025 mm Pgedpez D E Hlsfx Ac Aot Throughput capacity: 2.0 m³/h Drive: 0.64 kW Screen basket diameter: 100 mm If you are interested, please do not hesitate to contact us.

Condition: used, Year of construction: 2001, machine/vehicle number: 211649, operating hours: 7,222 h, input voltage: 400 V, input current: 43 A, input frequency: 50 Hz, pressing force: 178 t, oil tank capacity: 350 l, This FEHT Multipress sheet metal bending machine with accessories, model Multipress 175-40, will be auctioned off in our online auction "KGeschäftschließung Schellermann Metallbau GmbH - Vehicles, sheet metal bending machine, welding equipment, workshop equipment, raw materials, and more." You can find this and many other items from the metalworking and workshop equipment sector on our RESTLOS auction platform. Year of manufacture: 2001 Working length: 4050 mm Pgjdpfxez Ernxj Ac Ast Pressing force: 1750 kN Operating hours: 7221:41:47

Condition: used, Year of construction: 2002, machine/vehicle number: 81511, functionality: fully functional, overall weight: 25,000 kg, bending force (max.): 225 t, control type: CNC control, Equipment: european tool clamping system, Used HACO press brake ERMS432225, year of manufacture 2002, serial no. 81511 Pgsdjyml D Tspfx Ac Aet

Condition: good (used), Year of construction: 2006, Capacity 30 - 50 kg/h Diameter of the briquets 50 mm Motor output 5,5 kW Dimensions (L/W/H) 2000 x 1300 x 1400 mm Weight 500 kg Pgjdpfx Acez D Iule Aot 1 m³

Condition: reconditioned (used), Working width 3600 mm Working height 2600 mm Number of cylinders 5 St. loading dimensions L x W x H 4400 x 1150 x 2970 mm weight 3000 kg Schafberger + Sproedhuber Bavaria Frame Press ----- Machine will be partially reconditonned by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoiding cylinder collisions. Lower abutment adjustable in several positions for the most favorable insertion height. Pgsdpfx Acjw T Un Uj Aot 3 vertical press cylinders, double-acting, stroke adjusted to working height 2 horizontal press cylinders, double-acting Abutment and pressure plate depth 80 mm Working size: Length x Height = approx. 3,600 mm x 2,600 mm Space requirement/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing supports for sloped windows (Technical specifications according to the manufacturer – no guarantee! Images may differ from the original. Prices are net, plus VAT (domestic))

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, operating hours: 16,381 h, Used AMADA press brake Model: HFT 130-4 Capacity: 4000 x 130T Number of axes: 4 Y1 Y2 X and R AMADA automatic table crowning CNC: CD2000 Axes retrofitted with new drive units Pgsdpfx Asykyuzoc Aot New safety light curtains along entire length Fast working speed (laser): 100 mm/sec Clearance between uprights: 3,760 mm Total length: 5,480 mm Depth: 3,000 mm Height: 2,900 mm Weight: 11.5 tonnes Machine videos available on request.

Condition: used, Year of construction: 2001, Used hydraulic press brake Speedy - Model SC 16.5 CNC small - mobile - versatile Working length 550 mm Pedpfx Acozzafye Aegt Technical data: Year of manufacture: 11/2001 Manufacturer: TEDA Model: SC 16.5 CNC The machine is powered and can be inspected by appointment! Max. pressing force: 160 kN Max. return stroke force: 0.8 kN Distance between uprights: 380 mm Overhang: 200 mm Length, max: 550 mm Distance between table and ram: 400 mm Stroke, max: 250 mm Speed: - Approach, max: 100 mm/s - Working stroke, max: 10 mm/s - Return stroke, max: 125 mm/s Back gauge: X-axis – travel: 400 mm Rapid traverse: 200 mm/s Speed 50 mm before lower tool: 33 mm/s R-axis – travel: 120 mm Working pressure: 210 bar Installed power: 1.6 kVA Weight, unpacked: 1320 kg Connection voltage: 380 V Frequency: 50 Hz Measured settling time: 60 ms Safety distance: 96 mm Tool weight, max: - Model 31301-90-P08 L=550 mm: 25 kg - Model 41004-85 L=550 mm: 8 kg Processable sheet metal cutouts (approximate values) - Dimensions: 550 x 800 mm - Thickness: 5 mm - Weight: 16 kg

Condition: good (used), Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press Pgsdszytmbopfx Ac Aet -Manufacturer: Paul Müller, single-column eccentric press type ExP 45 -Pressure capacity: 45 tons -Clutch: Manual operation -Stroke: adjustable 4 - 80 mm -Table size: 465 x 690 mm -Table cutout: 220 x 175 mm -Protrusion: 230 mm -Punch hole: Ø 38 mm -Insertion height 300 mm -Dimensions: 1300/950/H2050 mm -Weight: 2220 kg