Used Deco for sale (243)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 61,700 h, functionality: fully functional, machine/vehicle number: 7831, spindle motor power: 5,500 W, turning length: 231 mm, spindle speed (max.): 10,000 rpm, turning diameter: 25 mm, spindle bore: 25 mm, overall weight: 3,000 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, feed length Y-axis: 534 mm, feed length Z-axis: 230 mm, total width: 1,400 mm, total length: 2,400 mm, total height: 2,060 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar diameter (max.): 25 mm, quill travel distance: 230 mm, quill diameter: 25 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, power: 5.5 kW (7.48 HP), travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, travel distance Z-axis: 230 mm, operating pressure: 6 bar, Equipment: documentation/manual, rotational speed infinitely variable, Tornos Deco SIGMA 20s Swiss-type automatic lathe, including Robobar SBF-532 3000mm bar feeder, Mayfran Consep chip conveyor with drum filter (unique version), electrostatic oil mist collector, and an automatic CO₂ fire suppression system (Kraft & Bauer). Fitted with a Fanuc 31i-model A CNC control, spindle speeds up to 10,000 RPM on both the main and sub spindles. The machine features 6 axes and 22 tooling positions: Main spindle: 12 positions, 6 of which are driven (up to 6,000 RPM) Sub spindle: 10 positions, 6 of which are driven (up to 6,000 RPM) Psdpfxoyrg Ahe Ad Sjgr Also equipped with high-pressure coolant, up to 80 bar. The machine can be inspected under power. Dismantling and transport are the responsibility of the buyer. Parts included with the machine: • External holder left, long – 6× (417608) • External holder left, short – 1× (417606) • Single driven holder, reduced speed – 2× (417612) • Double clamping, long – 2× (417617) • Double clamping, short – 2× (417620) • Driven block – 2× (417624) Bushings for pusher diameters (216787): • Ø10 • Ø16 • Ø20 • Ø25 Ejector set: • Ø5 to Ø20 (in 1 mm increments)

Condition: used, Unwinding reel, reversing reel, LIV type O 2X20/360 H - DZ - AP Double unwinding reel Manufacturer's No. 11154298, Year of manufacture 1998 Coil weight max. 2000 kg per side Coil width max. 360 mm Coil outer diameter max. 1200 mm Coil inner diameter approx. 350 - 450 mm Distance from center of reel shaft to floor 1200 mm Distance from center of reel shaft to reel base 1030 mm Hydraulic motor power 0.75 kW Mains connection 400 volts, 50 Hz - pneumatic disc brake for each side, separate - without drive for the reel core - hydraulic spreading of the reel core - pneumatic pressure arm with roller - reel structure can be manually rotated by 180° with locking positions - coil guide ring Ø 1240 mm, for lateral coil guidance - pivoting arm for mounting and dismounting the coil guide ring - electrical control for each coil side, separate Pedpfxjzwz Sye Ad Segr Space requirement L x W x H 2050 x 1700 x 2350 mm Weight 1950 kg in good condition

Condition: used, Year of construction: 1998, operating hours: 75,336 h, functionality: fully functional, machine/vehicle number: T62204, Equipment: documentation/manual, TECHNICAL DETAILS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speeds: 10,000 rpm - C axis indexing precision: 0.1° COUNTER SPINDLE Pgjdpfx Aow Stndsd Ssr - Max. bar diameter: 20 mm - Spindle speeds: 10,000 rpm - Spindle power: 3.7 kW - C axis indexing precision: 0.1° - Number of guide bush holders: 2 GUIDE BUSH HOLDER 1 - Number of positions: 5 GUIDE BUSH HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Live tooling speed: 8,000 rpm END ATTACHMENT - Number of positions: 4 - Number of driven positions: 4 - Live tooling speed: 6,000 rpm SECONDARY OPERATION - Number of positions: 7 - Number of driven positions: 3 - Live tooling speed: 8,000 rpm POWER SUPPLY - Supply voltage: 400 V - Total installed power: 14 kW WEIGHT & DIMENSIONS - Machine footprint: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg EQUIPMENT - CNC: Fanuc - Driven tool motor at: S2, S3, S5 vertical/horizontal - Rotating guide bush - Parts catcher - Workpiece ejection - Coolant tank - Bar loader: ROBOBAR SSF

Condition: good (used), machine/vehicle number: T61599, TORNOS DECO 10, serial number T61599, 9-axis, equipped with a TORNOS ROBOBAR automatic bar feeder, additional tray, lathe cleaned and in working order. Pgsdpfxezk Ug De Ad Sjr

Condition: excellent (used), Year of construction: 2013, operating hours: 53,000 h, Year 2013 Pgodpfx Adoznmr Ho Ser Operating hours: 53,000 10 controlled linear axes Bar diameter capacity: ø25.4 Complete with IEMCA MINIBOSS 325r bar feeder.

Condition: used, Year of construction: 2003, No. of axis 10 No. of spindles 2 Max. spindle bore 16 mm Pedpjzvb Ryjfx Ad Segr Spindle speeds 100-10000 rpm Live toolings on S2, S3, S5 & S6 Control: Fanuc PNC 16i Equipped with: Magazine barfeeder FMB Turbo 2-16

Condition: used, Year of construction: 2000, No. of axis 10 No. of spindles 2 Max. spindle bore 10 mm Spindle speeds 100-16000 rpm Control: Pgjdszvcduspfx Ad Ser Fanuc Equipped with: Magazine barfeeder FMB Minimag Chip conveyor

Condition: good (used), functionality: fully functional, Decoiler for up to 150 kg coil weight, stepless speed adjustable from 5 to 25 m/min. Rjbmnaoyyvzkj Sh Uer Podjzwt Nqepfx Ad Ssgr

Condition: used, Year of construction: 2015, functionality: fully functional, Heavy-duty pallet decoiler with integrated precision straightening head, designed to feed coiled strip material into stamping lines and other downstream processing. The large 1500 mm rotating table handles full pallet-mounted coils up to 3000 kg, while the 9-roll straightener (5 lower driven + 4 upper) ensures a flat, stress-relieved strip ready for production. Both turntable and straightener are independently driven via frequency inverters, allowing precise speed and tension control. Ideal for stamping operations where coil material is delivered on pallets rather than mandrels — eliminating the need for separate coil cars and reducing changeover time. Technical Specifications Table diameter 1500 mm Table load capacity 3000 kg Max. table rotation speed 10 rpm Strip speed 10 m/min (at core Ø 300 mm) Psdpfozav Ngsx Ad Sjgr Stamping direction Left to right Winding direction CW or CCW (selectable) Max. strip thickness 1.5 mm Max. strip width 220 mm Turntable drive motor 2.2 kW, inverter-controlled Turntable bearing Four-point bearing Straightener head 9 rolls (5 lower + 4 upper) Roll diameter 40 mm Lower rolls All driven Straightener drive motor 0.75 kW, inverter-controlled Electrical connection 3×400V + N + PE, 50 Hz, 16 A Dimensions (L × W × H) 2250 × 1500 × 1700 mm Weight ~750 kg Paint finish RAL 7035 light grey, structured

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 240 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,1 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 6000 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 13 [kVA] - Number of hours under power : 8291 [h] EQUIPMENT Podpfx Adszrh Sco Sjgr - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 vertical+horizontal,S6 - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor : INDASS - Coolant tank - Bar loader : Tornos SBF-532

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2410, Year 2001 with Fanuc Deco and 10 axes Fully inspected and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1500 kg Customs tariff number: 8458.11 20 Dimensions: 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard execution) Headstock (Z1 axis) (+C axis optional) Maximum bar passage diameter: 10 mm Maximum workpiece length, depending on guide bush: 60/90 mm Programmable spindle speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of transverse drilling/milling tools on turret: 4 Programmable rotation speed: 0-12,000 rpm End-working attachment (X3/Y3) Max. number of end-working tools: 3 Programmable rotation speed: 0-12,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C axis optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or rotating spindles: 4 Maximum spindle speed: 9,000 rpm Tornos-Bechler/Fanuc specific CNC control Processor type: 486 DX2 Number of simultaneous axes: 10 Machine versions Psdpjw T Tfrsfx Ad Sogr 9 axes + spindle C axis and/or sub-spindle C axis All technical details are subject to verification and provided without guarantee.

Condition: used, Year of construction: 2011, operating hours: 29,048 h, functionality: fully functional, turning diameter: 16 mm, bar diameter (max.): 16 mm, MOBILE TURRET LATHE, EVODEO 16a TYPE, WITH FANUC 16i-TB CNC CONTROL, PNC-DECO, 16MM CAPACITY / 10 AXES, WITH ELITE 220 TOOL CARRIER Including: - Base machine with 10 axes, FANUC 16i-TB - Synchronous rotating chuck, 16mm, including drive - C1 axis function - Polar coordinate function, C1 or C4 axis - S6 motor (8,000 rpm) for a maximum of 3 rotating tools on a tool system (X1-Y1), not synchronized with S1 - S2 motor (8,000 rpm) for a maximum of 3 rotating tools on a tool system (X2-Y2) - S3 motor (8,000 rpm) for a maximum of 3 rotating tools in the end position - Tailstock with positioned stop - C4 axis function - Limitation of the clamping stroke of the tailstock (system for fine adjustment of the clamping diameter) - Part extractor with adjustable pneumatic cylinder, including cleaning of the tailstock chuck with oil (maximum pneumatic cylinder stroke 150mm) - S5 motor (8,000 rpm) for a maximum of 6 rotating tools (synchronizable with S4) - 3-color light beacon, configurable (colors: yellow, red, green) - Centralized lubrication system, BIJUR type - Adaptation for work without a chuck (maximum part length 50mm) (requires one of the options 0937 to 0941) - TB-DECO ADV programming software MOBILE TURRET S1 (Z1) - 12,000 rpm - Right-hand bar rotation Pjdpfjzd Sq Hsx Ad Ssgr - Adaptation for SCHAUBLIN F22 chuck (no. 76-0071) TOOL SYSTEM (X1-Y1 / X2-Y2) - 2 independent carriages with 5 positions - 2 independent S2, S6 motors END TOOLING - Independent carriage with 4 positions - Independent S3 motor INDEPENDENT TAILSTOCK (Y4-Z4) - 12,000 rpm - Adaptation for SCHAUBLIN F20 chuck (no. 76-201) COUNTER OPERATIONS (X4) - Stations with 6 positions (3 in the end position and 3 transverse) VARIOUS - Device for evacuating and collecting parts outside the machine - Variable flow coolant pump - Lighting lamp - Electrical interface for fire extinguishing system, compliant with CE and EMC standards NUMERICAL CONTROL - FANUC 16i-TB numerical control - 10" color screen - TB-DECO ADV programming software (version 750-005 + 750-0710) EQUIPMENT - Adaptation for F13 chucks - Long type tool holder, 12x12mm or ½ inch section, right-hand bar rotation - Adaptation for chucks - System for adjusting the chuck clamping from the front for F13 chuck - System for adjusting the chuck clamping from the front for F20 chuck - Electrical interface 2004 (maxi2) including 2 sockets for adapting up to 2 peripherals - Swiss 230 V socket - Oil mist extraction device

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3467, Country of manufacture: Switzerland Net weight: 3000 kg Pgjdpsw Uczxefx Ad Ser Customs tariff number: 8458.11 20 Dimensions: 215 x 150 x 215 cm TECHNICAL SPECIFICATIONS (standard) Headstock (Z1 axis) (+C optional) Maximum bar capacity: dia. 20 mm Maximum part length depending on type of guide bush: 200 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum spindle power: 3.7 (5.5) kW Tool holder (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes): 2 x 5 Tool section: 16 x 16 mm Number of cross drilling/milling stations on turret: 4 Programmable rotational speed: 0–8,000 rpm End working attachment (X3/Y3) Maximum number of end working tools: 4 Programmable rotational speed: 0–8,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C optional) Maximum clamping diameter: 20 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum number of secondary operations: 7 Number of fixed or rotating spindles: 7 Maximum spindle speed: 8,000 rpm Tornos-Bechler/Fanuc dedicated CNC Processor type: 486 DX2 Number of simultaneous axes: all All technical data are provided without guarantee and subject to change and error.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Year of manufacture: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Pgjdpfeyangksx Ad Sor Coil weight: up to 1–2 tons

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Pgjdow T Tcwjpfx Ad Sjr Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: used, Year of construction: 2011, operating hours: 34,809 h, functionality: fully functional, TORNOS SA EvoDECO 16a with Elite 220 bar feeder Includes: - Base machine, 10 axes, FANUC 16i-TB - Synchronous 16mm rotating chuck including drive - C1 axis function - Polar coordinate function for C1 or C4 axis - S6 motor (8,000 rpm) for a maximum of 3 rotating tools on the tool system (X1-Y1), not synchronized with S1 - S2 motor (8,000 rpm) for a maximum of 3 rotating tools on the tool system (X2-Y2) - S3 motor (8,000 rpm) for a maximum of 3 end-facing rotating tools - Tailstock with positioned stop - C4 axis function - Limitation of the clamping stroke of the tailstock (system for fine adjustment of the clamping diameter) - Part extractor with adjustable pneumatic cylinder, including cleaning of the tailstock chuck with oil (maximum pneumatic cylinder stroke 150mm) - S5 motor (8,000 rpm) for a maximum of 6 rotating tools (synchronizable with S4) - 3-color light beacon, configurable (colors: yellow, red, green) - Centralized lubrication system, BIJUR type - Adaptation for operation without chuck (maximum part length 50mm) (requires one of options 0937 to 0941) - TB-DECO ADV programming software MOVABLE HEADSTOCK S1 (Z1) - 12,000 rpm - Right-hand bar rotation - Adaptation for SCHAUBLIN F22 chuck (no. 76-0071) TOOL SYSTEM (X1-Y1 / X2-Y2) - 2 independent carriages with 5 positions - 2 independent S2, S6 motors END TOOL Pgsdpfszd Shljx Ad Ser - Independent carriage with 4 positions - Independent S3 motor INDEPENDENT TAILSTOCK (Y4-Z4) - 12,000 rpm - Adaptation for SCHAUBLIN F20 chuck (no. 76-201) COUNTER OPERATIONS (X4) - 6-position stations (3 end-facing and 3 transverse) MISCELLANEOUS - Device for evacuating and receiving parts outside the machine - Variable flow coolant pump - Lighting lamp - Electrical interface for fire protection system, compliant with CE and EMC standards NUMERICAL CONTROL - FANUC 16i-TB numerical control - 10" color screen - TB-DECO ADV programming software (version 750-005 + 750-0710) EQUIPMENT - Adaptation for F13 chucks - Long-type turning tool holder, 12x12mm or ½ inch section, right-hand bar rotation - Adaptation for chucks - Front clamping adjustment system for F13 chucks - Front clamping adjustment system for F20 chucks - Electrical interface 2004 (maxi2) including 2 sockets for adapting up to 2 peripherals of choice - Swiss 230 V socket - Oil mist extraction device

Year of construction: 2024, condition: like new (used), functionality: fully functional, We offer this like-new Jouanel DVS1000D double unwinding reel, manufactured in 2024. Maximum coil width: 1000 mm Maximum coil weight: 1200 kg Maximum coil outside diameter: 1000 mm Pgsdpfxjza Eble Ad Ser Coil inside diameter: 285 to 540 mm Dimensions L × W × H: 1760 × 1540 × 1380 mm Net weight: 239 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 12,000 rpm, bar diameter (max.): 13 mm, number of axes: 6, This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 – 12,000 rpm. The machine includes a linear tool system with 6 tool positions and full machining capabilities for turning, drilling, tapping, and threading. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 13 b Swiss Type Lathe we have for sale. Contact us for further details. • Capacity: • Max bar diameter: 13 mm • Axes: • Number of axes: 6 (X1, Y1, Z1, X2, Y2, Z2) • Main spindle (S1): • Max bar capacity: 16 mm • Recommended min bar diameter: 3 mm • Max workpiece length: 160 mm Psdpfx Adeywlhbj Segr • Collet type: Schaublin F20 • Subspindle (S2): • Max part diameter: 16 mm • Max part length (counter-operation): 160 mm • Spindle speed: 100–12,000 rpm • Clamping force: 730 daN • Axes travels: • X1: 35 mm, Y1: 158 mm, Z1: 187 mm • X2: 118 mm, Y2: 160 mm, Z2: 174 mm • Feed rates: • Max axis speed: 20 m/min • Guide bushing: • Max bar passage: 16 mm • Tooling system: • Linear tool system (front + rear) • Number of tool positions: 6 (3 axial + 3 transversal) • Tool spacing: 38 mm • Max rotating tools: up to 3 • Driven tools (S3): • Max speed: 8,000 rpm • Power: up to 1.1 kW • Drilling capacity: up to 8–10 mm • Tapping capacity: M6–M8 • Counter operations: • 3 working positions • Full machining capability (turning, drilling, tapping, threading) • Cooling system: • Oil capacity: 200 L • Chip tank: approx. 100 L Additional equipment • Bar feeder (integrated): • Max bar length: 3.3 / 3.85 / 4.2 m • Min bar length: 1.2 m • Bar diameter range: 3–16 mm • Parts unloader • Oil bath system • RS232 interface • Work area lighting Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 184 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] MACHINE HOURS - Number of working hours : 54.035 [h] Pgodpfx Adouhhp Ss Sor EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5,S6 - Rotating guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : IEMCA GENIUS 118 / 32LL - Cooling unit : MARKSA CSW 200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 3

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 Pgodpfozi E U Aox Ad Sjr - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] - Number of hours under power : 88873 [h] - Number of working hours : 47253 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 vertical et horizontal - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader : IEMCA BOSS 542 R 32L

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Psdpfxepvlf Sj Ad Sjgr Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 Pgjdpfsy Aprbex Ad Ser - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 x 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Ejection of workpiece - Coolant tank - Bar loader : LNS TRYTON

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] Psdpfx Aoy Aprhjd Sjgr WEIGHT & DIMENSIONS - Machine floor space : 1700 x 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Ejection of workpiece - Coolant tank - Bar loader : LNS TRYTON

Condition: used, functionality: fully functional, Year of construction: 1997, Double unwinding reel 2000.2H Pjdpfxjztx Eie Ad Sogr Maximum load capacity: 2,000 kg per side Maximum web width: 400 mm Spreading range: 460 – 520 mm Maximum outer diameter: 1,500 mm Hydraulic spreading via sliding wedge system + automatic retensioning Disc brake Lateral adjustment Counter bearing can be manually attached with quick-release clamps Presser roller on each side, pivoting with the reel, the presser roller serves to guide the web.

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 184 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] Psdpfsuha D Usx Ad Sogr - Total installed power : 14 [kVA] MACHINE HOURS - Number of working hours : 42762 [h] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5,S6 - Rotating guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : Iemca Genius 118 / 32 LL - Cooling unit