Used Thickness for sale (8,534)

Condition: used, Year of construction: 2007, used, top specification, machine overhauled, cleaned, fully adjusted trial planing with Tersa cutter block large planing height New parts: key bar for cutter block 2 outfeed rollers 1 table pressure roller with complete adjustment bearing blocks Ihedpfx Afswqg R Djnju Tersa planer knives Make: SCM Model: S630 E- Invincibile Year of manufacture: 2007 Machine number: AB/184684 GS tested CE type tested GS wood dust tested Upgraded motor: 7.5 kW Planing width: approx. 630 mm Planing height: approx. 300 mm table pressure rollers: 2 adjustable chain pressure bar chain feed roller rubber outfeed roller (2x new) variable feed up to 20 m/min number of knives: 4 automatic motor brake knife system: Tersa reversible knives digital display for planing height electric height adjustment extraction port: 160 mm space required: approx. 1400 x 1000 x 1200 mm weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without warranty or guarantee

Condition: used, Year of construction: 1986, from model making workshop Machine fully cleaned, lubricated, completely readjusted, partially overhauled Planer knives replaced, Drive belt replaced, Table slats replaced, Test run with planing Knives sharpened and installed Used, excellent condition, low operating hours Manufacturer: Panhans Model: 426 Year of manufacture: 1986 Machine no.: 670 Ijdowhqw Ajpfx Afnshu GS-tested Upgraded motor: 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Adjustable table feed rollers Segment pressure beam Segment infeed roller Feed speed 7–14 m/min Number of knives: 4 Knife system: strip planer knives Digital display for planing height Electric height adjustment with fine handwheel control Extraction connection D 160 mm Space requirement approx. 1200 mm x 1000 mm x 1400 mm Weight approx. 1150 kg Location: 97447 Gerolzhofen, free loaded on truck, unpacked Delivery in current as-inspected condition, without warranty or guarantee.

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Ihodpfoxnqyhjx Afnou Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Ihodpfx Afjw Elmyjneu Nirox multi-Thick-MS1-CH1 – Sensor for Multi-Layer Thickness Measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, designed for precise, non-contact measurement of multi-layer materials such as plastic films, composites, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industries. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate layer thickness measurement Measuring method: A-Scan / optical interference analysis Channel: 1 (CH1) Fields of application: Inline measurement in production lines or for laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (see image) Sensor multi-Thick-MS1-CH1 Connection cable (Subject to changes and errors in technical data. All information is provided without guarantee!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), Thickness planer Iodpfx Afeyff Sbenehu Manufacturer: UTIS Model: R 50 Planing width: 500 mm Planing height: 240 mm Table length: 1200 mm 4-knife cutterhead 2 table rollers 4 spare knives and setting gauge The machine is in very good condition and ready for immediate use.

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine - Ihodpou R Sztofx Afnou

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg Isdpfxsu R Sz Ts Afnohu - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg Ihjdou R S Awepfx Afnju - Special offer price - - new exhibition machine -

Condition: used, Thickness planer SCM S 63 - used - Segmented pressure beam, Under-table roller, Separate feed motor ----- Technical specifications ----- Ijdpjxm R Uvofx Afnohu Planing width: 630 mm, Number of knives: 4 pcs., Passage height: 235 mm, Feed speed: 6 /9/12/18 m/min., Extraction nozzle Ø: 180 mm, Weight: 1035 kg

Condition: excellent (used), Catalogue number: 7775 TECHNICAL DATA - Cutterblock width: 640 mm - Number of knives: 4 pcs - Maximum working thickness: 300 mm – From above: - Anti-kickback fingers - Toothed, pulling, swiveling infeed roller - Pressure bar - Planing cutterblock - Pressure bar - 2 smooth, pulling, rubber-coated outfeed rollers - Digital thickness display - Main motor: 5.5 kW - Electric table lift: 0.7 kW - Variable feed speed: 6–20 m/min - Feed motor: 1.1 kW - Dust extraction port diameter: 150 mm - Dimensions (L/W/H): 1000 x 1400 x 1200 mm - Weight: 950 kg ADVANTAGES – Italian manufacture – Electric thickness display – Electric table lifting Ihedpfeycihbex Afnou – Used thickness planer in very good condition, complete with original technical documentation (DTR), CE marking Net price: 31,900 PLN Net price: 7,590 EUR based on 4.2 PLN/EUR (Prices may vary with exchange rates)

Condition: excellent (used), Catalogue number 7734 TECHNICAL DATA - Shaft width: 630mm - Max. thickness of workpiece: 230mm - 4-knife planing shaft * from above: - Anti-kickback fingers - Toothed feed roller - Pressure bar - Planing shaft - Pressure bar - 2 smooth, driven outfeed rollers * from below: - Adjustable roller in bottom table - Motor approx. 7.5kW - Stepless feed speed adjustment - Extraction port diameter: 145mm - Dimensions (LxWxH): 1250x1300x1300mm - Weight: 908kg Ihsdpfx Afjycidvjnju ADVANTAGES – Italian manufacture – Very good condition – Used thickness planer Net price: 21,900 PLN Net price: 5,200 EUR based on 4.2 EUR exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: Iedsx U U Ekjpfx Afnehu - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: excellent (used), CATALOG NUMBER 7683 Technical data: - Cutter block width: 510 mm - Number of knives: 4 pcs - Maximum thickness of workpiece on thicknesser: 200 mm - Manual table lift - Maximum thickness of workpiece on side heads (3-sided): 100 mm From above: - Anti-kickback fingers - Feed (infeed) roller, serrated - Pressure bar - Planing (cutter) block - Pressure bar - Outfeed roller, smooth From below: - Adjustable rollers in lower table: 2 pcs - Guide bar From rear: - 2 side spindles + pressure bars - Spindle height: 100 mm Ihedpfeyarghox Afnju - Maximum spindle spacing: 510 mm - Spindle diameter: 25 mm - Includes 2 cutter heads - Spindle adjustment: right/left - Motor: 2×2.4 kW - 2 feed speeds - Extraction port diameter: 2×100 mm - Main motor: 7.5 kW - Overall dimensions (L/W/H): 1850×1250×1000 mm - Weight: 1080 kg ADVANTAGES: – Made in Poland – 4-knife cutter block – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR (based on the rate of 4.2 EUR) (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NO. 7599 TECHNICAL DATA - Shaft width: 410mm - Number of knives: 4 pcs - Max thickness of processed element: 240mm - From above: - anti-kickback fingers - toothed feed roller, driven, swivel - pressure elements - planing shaft - pressure roller - smooth driven outfeed roller - Motor: 5.5kW - Electric brake - Manual table height adjustment - 2 feed speeds: 7,14m/min - Extraction port diameter: 120mm - Dimensions (L/W/H): 900x1030x1100mm - Weight: 350kg ADVANTAGES – Italian manufacture – Used thickness planer, very good condition Ihsdeyarf Dspfx Afneu Net price: 14,900 PLN Net price: 3,540 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7573 Technical data: - Shaft width: 640 mm Ijdpfx Aoyarbfjfnohu - Number of knives: 4 pcs - Max thickness of machined element: 270 mm - Top section: - Safety pawls - Toothed infeed shaft, driven - Hold-downs - Planing shaft - Hold-downs - Outfeed smooth shaft, driven - Bottom section: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5 kW - Electric table lifting – lifting motor: 0.75 kW - 2 feed speeds – feed motor: 1.1 kW - Suction outlet diameter: 160 mm - Dimensions (L/W/H): 1150x1240x1170 mm - Weight: 1073 kg ADVANTAGES: – Polish manufacture – Electric table height adjustment – Operating documentation (DTR) – Used thickness planer, in very good condition Net price: 26,900 PLN Net price: 6,400 EUR (depending on 4.2 EUR rate) (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalogue number 7739 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife cutterblock - sound-dampening comb Ihsdpfxexbp Ane Afnsu - shaft guard - adjustable angle guide fence - table length: 2060 mm - both tables adjustable THICKNESSER: - max material thickness on thicknesser: 240 mm - thicknesser shaft guard *from above: - anti-kickback fingers - serrated, sprung feed roller - pressure bars - planing cutterhead - pressure bar - smooth outfeed roller - 2 adjustable rollers in lower table - main motor: 5.5 kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter: 120 mm - dimensions (L/W/H): 2060x970x1150 mm - weight: 660 kg ADVANTAGES – Italian-made – sound-dampening comb – not repainted – in perfect condition – used planer-thicknesser Net price: 22,900 PLN Net price: 5,450 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger exchange rate changes)

Condition: excellent (used), functionality: fully functional, For sale. Maximum planing width: 630 mm Ihjdeykmz Ispfx Afnsu Planing height: 230 mm The set includes: Operating manual Knife setting gauge for planing knives 90° elbow for dust extraction 4 additional sets of knives I am happy to answer any questions.

Condition: used, Year of construction: 2008, Thicknesser Robland D510 Serial no. Year of construction 2008 Table dimensions 510x850mm Max. working width 510mm Min-max working height 250mm Max planing depth 8mm 4 knives Tersa Ihedpfx Aewnh Tbsfnou 4 throughput speeds 5/8/10/16 m/min Electrical high/low 380V, 5.5kW, 6000 Rpm Dimensions: 1200*880*1100mm, weight 480kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Max. planing width [mm]: 530 - Max. planing height [mm]: 300 - Max. planing depth [mm]: 530 - Planing shaft speed [rpm]: 5000 - Worktable length [mm]: 880 - Planer block diameter [mm]: 110 - Cutter type: Tersa - Number of cutters [pcs.]: 4 - Extraction nozzle diameter [mm]: 150 - Max. feed speed [m/min]: 19.5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, Motor power 4 kW, direct start with brake and limit switch Planing/joining width 410 mm Total planer table length 2000 mm Feed planer table length 980 mm Ijdpoyivi Eefx Afnohu Chip removal max. 4 mm - set and displayed on the right planer table Swiveling jointer fence with anodized ruler Planer shaft with 4-knife cutterblock system Planing thickness 404 mm with automatic E-thickness Powerdrive height adjustment (min. - max. 3 mm - 230 mm) Digital display for thickness height in mm Euro comfort safety guard Operating hours counter 2-stage synchronous feed 6 + 12 m/min Extraction port diameter of jointer/thickness unit 120 mm

Condition: ready for operation (used), Faithfull Printing Equipment Digithick TM-353 High-precision Thickness Gauge SN:602262 + Side Table 1040 x 520 x 760 mm, used, normal signs of wear, 100% fully operational, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and transport! Iedox Eq Hrjpfx Afnehu

Condition: new, The SCM S630 CLASS thickness planer is a practical heavy duty thicknesser with robust industrial design. All controls and indicators are at the front control panel The machine can plan parts up to a massive 300 mm thickness and 630 mm width. The SCM feed system uses up to three driven upper feed rollers. They have a large diameter and are power driven The first roller is sectional The two outfeed rollers are rubber coated. Ihodpfx Aodccuksfneu Max working width 630 mm Main motor power 7 kW 9.5hp Worktable dimensions 640 x 1000 mm Working height (min / max) 3.5 / 300 mm Maximum stock removal 8 mm Minimum working length 260 mm Minimum working width 10 mm Cutterblock speed 4500 rpm Cutterblock diameter 120 mm No of knives 4 Dimensions of standard knives 630 x 35 x 3 mm Variable Feed speeds 4 - 20 m/min Dust exhaust diameter 150 mm

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Isdex Ttbzspfx Afnshu Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7693 TECHNICAL DATA - shaft width: 810mm Isdpfx Asx Thp Tjfnshu - max workpiece thickness: 170mm - 4-knife cutterhead * from above: - anti-kickback fingers - toothed feed roller, driven - pressure bar - planing cutterhead - pressure bar - smooth outfeed roller, driven - from below: 2 adjustable slip rollers in the table - electric table lift - 3 feed speeds - main motor power: 7.5 kW - dimensions (L/W/H): 1230x1600x1320mm - weight: 1360kg – Bulgarian made – 4-knife cutterhead – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on 4.2 EUR rate) (Prices may vary with significant exchange rate fluctuations)

Condition: as good as new (ex-display), SHOWROOM MACHINE For sale is an as-new Record Power PT 107 planer-thicknesser with a planing width of 265 mm. The machine is in original condition, so you receive the full warranty. Technical specifications: - Planing width: 265 mm - Planing table length: 1,110 mm - Max. planing depth: 3 mm - Tiltable fence up to 45° - Cutterblock diameter: 75 mm - Large 3-knife cutterblock - Speed: 4,000 rpm - Max. thicknessing height: 190 mm - Thicknessing infeed width: 265 mm - Feed speed, thicknesser: 5 m/min - Max. depth of cut, thicknesser: 2 mm - Motor: 2.3 HP / 230 V - Power consumption: 2,200 watts - Extraction port: 100 mm - Weight: 162 kg One unit of this planer is available at both A-5431 Kuchl and A-8561 Söding, and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70 incl. VAT Germany: €90 incl. VAT South Tyrol: €130 incl. VAT Related terms: planer, thicknesser, planer-thicknesser, surfacer, thickness planing Reference: ZXPT107-A Ihedpfx Afsuv Exisnju

Condition: like new (used), Year of construction: 2023, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been checked by our specialist staff and is in mint condition. Technical data: - 3 system knife planer shaft - Planing width 410 mm - Planing length 1800 mm Isdpfxov Dah De Afnshu - Max. passage 230 mm - Motor power 4 kW / 5.4 HP - Extractable Ø 120 mm - Year of manufacture 2023 - Mint condition The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-A0117-1