Used Thermoform for sale (175)

Year of construction: 1990, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition Kdjdpfsnr Ex Tex Ag Usg - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm 1x 2-fold tool - diameter 93.80x120.90mm

Condition: as good as new (ex-display), machine/vehicle number: 1966190, Heating table HT3110 For tempering thermoplastic materials such as mineral plastics, acrylics, etc. to the required processing temperatures. Kjdpfxo T Sv So Ag Usdg Torsion-resistant base frame consisting of welded steel profiles. Movable on four rollers. Upper folding frame at the rear side rotatably mounted in a solid spherical bearing. Two aluminium heating plates black anodized maximum operating temperature 180 C. Temperature control by means of electronic controller in separate switch cabinet in the base of the table. The swivel movement is actuated by pneumatic cylinders located on the side. Four adjusting screws on the side for setting the material thickness.

Condition: new, The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio. By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system. The shredder and the granulator are driven individually, which contributes to better control of the whole process. To increase the efficiency, ZERMA Smart Drive System is used to constantly control the load and adjust the amperage accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where predictable quality in size reduction and granulation is required. Typical applications include, but are not limited to, the following: Kdedpfsghgd Sjx Ag Usg Injection Molding Thermoforming Blow molding Recycling Extrusion Waste

Year of construction: 2006, condition: good (used), Illig SK 74-C from a workshop for the disabled Year of construction 2006 serial no.426-0172 Kdjdpfer Nv E Nox Ag Ueg +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600

Condition: new, MEP COBRA 352 SX evo [Semi-automatic] Article number CB352SX motor power 1,5/2,2 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 285 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Kdjdpfjchkv Isx Ag Uog Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Semi-automatic circular saw for sawing of solid and hollow aluminum materials and light alloys with electro-welded carbide tooth wheel. Basic equipment: -Machine for miter cuts from 45° right to 45° left. -Alignment along the vertical gives the possibility of sawing operations with head inclined between 0° and 45° left. -* MEP represents the latest generation of controls designed for semi-automatic machines with single axis microprocessors. -CHARACTERISTICS: At the start of the cycle: - Vise closes and motor starts - Saw head lowers for cut - Motor stops - Saw head raises - Vise opens. -New - Display with 16 characters x 2 lines for displaying the following technical parameters: + number of executed cuts + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -New - Display and entry of the alarm and error messages with the possibility of displaying the incidents that have occurred. Electrical equipment: -New - Low voltage control panel: membrane polyester keypad with thermoformed and highlighted push buttons and actuation control signal. -Saw blade stroke programmable directly from the control panel, to adapt to the cutting material. -Ball bearing mounted rotary table to ensure easy and accurate rotation. -Clamping system consisting of two face vices that can be freely arranged along the longitudinal axis of the parts. -Adjustable mechanical stops for quick positioning of the head in the angular positions at 0° and 45° right and left. -Swarf extractor with preparation for OPTIONAL extraction system. -Automatic saw blade lubrication system, operating only at the start of the cut. -Machine is supplied without saw blade. -Preparation for the installation of the minimal lubrication kit of the saw blade (OPTIONAL), besides the conventional standard lubrication with emulsion oil. -Tool and instruction manual with spare parts list. For further technical data, please refer to the attached PDF document. Catalog 2nd page !

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Ksdpfxjcgbq Io Ag Uodg Bimetal saw band for solid and profiled material. Tools and instructions for use in the user's language. For further technical data, please refer to the attached PDF document.

Condition: excellent (used), Year of construction: 2013, operating hours: 24,666 h, functionality: fully functional, - Top functional packaging machine (thermoforming machine) of the PowerPak series. - Perfect for packaging pasta products. - Viewing under production conditions (packaging of gnocchi) possible at any time. - With matching feed belt and ExaktaPack brand scale (included). Technical details GEA PowerPak: Kedpfx Agjua Hche Uodg - Film width: 350 mm lower web, 334 upper web - Approx. 12 cycles / minute - Forming tools: 1.1, 2.1, 2.2 - Rigid film, PP, PET, etc. - Bottom web preheating - Longitudinal and cross cutting with silent edge strip winding - Machine length approx. 9m - Draw-off: 60 mm - Busch vacuum pump (included) - Eject station and distribution pneumatic - Flow cooler for cooling form and seal stations. Additional information on request and/or inspection gladly possible.

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Kdodpfx Agoxaphbs Usg

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Kjdpfxowih Arj Ag Uedg

Year of construction: 2008, condition: good (used), KARVILLE Tornado 2500 – overhauled in 2020! Year of Manufacture: 2008 _____ Machine Specifications and Equipment: Tornado - Electric Tunnel The newest addition to our product line, the tornado tunnel is an electric shrinking system ideal for use on steam sensitive applications. With the capability to create a superior shrink appearance similar to steam tunnels on almost any container shape, this tunnel generates a compact solution to applications where high quality shrinking is required and the use of steam is not acceptable. The Tornado provides the best solution for:  Shrinking for Difficult Shaped Containers  Shrinking for Water Sensitive Products  Shrinking for Heat Sensitive Containers like PET  Eliminating after-shrink wrinkles  Saving Energy - High Efficiency Design  Saving Space - No Need for Extra Leister Guns and Special Rotation Systems  Minimizing Mechanical Maintenance - Simple Machine Structure  Eliminating the need for Steam Boiler and Infrastructure. This is ideal for blow molders, contract packers and thermoformers. _____ Accessories Included:  Manuals  Keyes  Etc. _____ Kedpevxkatsfx Ag Uedg Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 2013, operating hours: 1,234 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: o, TECHNICAL DATA – MAGIC SKIN 5035 Kdjdpfx Aexcv U Hsg Ujg Power supply: 240 V – 1 Ph Required power: 3.5 kW Overall machine dimensions (L x W x H): 1860 x 1000 x 1350 mm Working table height: 1020 mm Weight: 150 kg Maximum carton size: 495 x 345 mm Maximum product height: 100 mm Air consumption: – Performance: two cycles / min Notes: Technical modifications reserved. Performance depends on operator and type of packaging.

Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since. Kdsdoq Ixglopfx Ag Ueg

Condition: used, We are selling a well-maintained generator from Kiefel. The generator and tubes have few operating hours. The rotary table shown in image 1 is no longer available. Kdjdpfxew Hdzlj Ag Usg

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1545012, total length: 4,500 mm, Sealpack RE15 Stainless steel thermoforming machine Rigid and flexible film Film width 320 mm peel-off 200 mm Bottom film holder in stainless steel Pneumatic lifting system forming station (heavy duty) Heating and forming via standard lid heating Heating and forming with compressed air Safety covers in stainless steel Free insertion distance of approx. 650 mm Built-in vacuum pump 100 ccm (1 piece) Foil transport chain 1/2" type K Top and bottom chain guide Sealing station with pneumatic stroke Designed for vacuum and MAP formats : 1.1 Is 2 x available with different widths 4.1 It is also possible to design additional formats ! Hard foil punch and soft foil cutter Edge strip rewinder Seal pack RE15 Stainless steel deep drawing machine Hard and soft film Film width 320 mm Deduction 200 mm Bottom film holder in stainless steel Lifting system forming station pneumatic (heavy duty) Heating and shaping via standard lid heating Heating and shaping with compressed air Stainless steel safety covers Free insertion distance of approx. 650 mm Built-in vacuum pump 100 cc (1 piece) Film transport chain 1/2" type K Chain guide top and bottom Kdjdpfju Dipzsx Ag Uog Sealing station with pneumatic lift Designed for vacuum and MAP Formats: 1.1 There are 2 x available with different widths 4.1 There is also the possibility of designing additional formats! Hard foil punch and soft foil cutter Edge strip winder

Condition: like new (used), Year of construction: 2019, functionality: fully functional, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, Lightly used ORMA MEMBRANE PRESS, model DUPLEX 30/15 vacuum press with preheating oven/table for acrylic and thermoform plastics. Has only seen occasional light project use. Suitable, for example, for processing Corian sheets. An alternative to buying a new machine. Pressing area: 3000 x 1500 mm Vacuum pressing force across the entire work area: 44 tons 11 tons/m2 Maximum pressing height: 500 mm ORMA HEATING OVEN/TABLE 30/15 FOR ACRYLICS AND THERMOFORM PLASTICS • Heating by electric resistors and air circulation • Heated area: 3000 x 1500 mm • Max height of workpiece: 100 mm • Heating power: 18 kW • Maximum temperature: 200°C • Digital temperature control from the control panel The unit's frame is made from welded thick steel beam structure and welded steel sheets. There is an insulation layer between the galvanized steel sheets of the oven’s inner and outer surfaces. Manual oven opening, guided rails, and transport wheels. Membrane press bed is phenolic-coated plywood featuring a grid pattern for improved vacuum distribution. Ksdpfjxz Rhfjx Ag Uedg The top section, where the membrane film is mounted, opens 45 degrees and is equipped with gas springs. Quick and easy upper section locking. Manual membrane film quick-mount system. Vacuum system with a single 25 m3/h vacuum pump. Control panel, installed on the left side of the machine, includes: • Main switch • Control voltage indicator lamp • Emergency Stop button • Temperature monitoring/control • Vacuum pump status light on/off • Heater status light on/off

Year of construction: 2008, condition: used, For sale is the Vc999 type thermoforming packaging machine shown in the picture. The machine was manufactured in 2008, made in the USA. 12KW. KB 6 meters long. Film width 420mm. Universal closing tool that can handle 1/1, 1/2, and 1/4 formats. The machine now has 1/4, and the 1/2 tool is also included. Vacuum with protective gas. Kodpjxt N Etefx Ag Ujdg We packed the 400g pinsa with the 1/2 tool. But we packed XXL hamburgers and hotdogs. 2 Busch vacuum pumps. The forming pump is next to the machine, the package vacuum pump is placed in the machine house. The machine was renovated in 2025. The clip chain was replaced, which was about 8000 eur. All pneumatic cylinders and valves and sensors are Replaced refurbished. Everything works well. Can be tested in Hungary, (8000, Székesfehérvár) The price is without tax and without shipping.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, brushing machines, film storage paternoster, and membrane on machineseeker! Function: The feeding tray of the press is in position, the work piece carpet is pressed under the holding device. With the vacuum it is hold in position and rotated by 180 °. Then the vacuum turns off and the work piece carpet is turned and the applied charge will be processed directly on the turn over device. Kjdsd S Dqnjpfx Ag Usdg Advantages: • The 3D-thermoforming productivity increases- because of quick clearing the table • Savings of time and staff - the preliminary cutting-out of the pressed parts is removed completely • Simple handling of the boards • The foil edges of the 3D furniture doors are not damaged, because the foil is not pulled over the edge of the door • Automatic transfer of the whole carpet to a carpet trimming machine is optionally available. • The pins will be protected with this turn over system because the cutout of the over standing foil is made not on the pin table. Details: • Rigid welded frame construction to accommodate the machine parts • Standard size 2800 x 2220 mm x 1200 mm • Hydraulic power unit • Turn table consisting of 9 arms with a special surface of rubber • Vacuum system with hose connections for the turn table • Turning cycle approx. 18-25 seconds • Control System: Siemens LOGO • Protective fences and security devices For the presentation of the turning process, a video is available.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and membrane on machineseeker! RBM 1500 F e a t u r e s • Four-head rotating brush • Infeed inclined roller conveyor with separation • Spiral brush for removal of loose glue residues O p t i o n s • Fifth head rotary brush • discharge roller conveyor with buffer function • Deionization of the furniture fronts after cleaning • Modem for remote maintenance A d v a n t a g e s • Chaotic occupancy by automatic Adaptation to front thickness and size • Up to 2000 parts / 8 h The RBM 1500 is a brush machine for film-coated 3DMöbelfronten. The proven four-head rotary brush system removes the Glue overspray on the backs of the furniture fronts and achieves an optimal edge quality. This result is achieved by the disc brushes pneumatically pressure-controlled touch down and the backs the fronts are singing. The RBM 1500 is for a performance of up to designed for 2000 parts per shift. This is the machine the optimal brush system for smaller and medium sized Productions. The RBM 1500 is with an automatic size and Kdodpfx Ajd S Eagsg Ueg Thickness detection of furniture fronts equipped. This allows adaptation to chaotic loading without loss of time in the run. The flexible control offers the Possibility of brushing rectangle and contour parts. The low-maintenance brushes and long service life ensure low production costs. P r o d u c t i o n Machine: RBM 1500 Front shape: Rectangle / Contour Frontsize minimal (L x W x H): 180 x 90 x 15 mm Maximum frontsize (L x W x H): 3000 x 650 x 38 mm Brush operation: 2000 parts per 8 h Standard parts of 650 x 400 mm

Condition: good (used), In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage brushing machines, and membrane on machineseeker! Paternoster For the membran press membrane press FOILS-STORAGE-PATERNOSTER for the foil-roles stock and at the membrane press Technical Description: Height of the paternoster 3800mm Max. foil width 1600mm Max. foil diameter 500mm 12pcs bearing rods Size of the paternoster 1000x2370x3800mm Inclusive foil transporter (trolly) Drive capacity 1,5 kW Total upload 4080 kg at a max. rolls weight of 340 kg Tools weight incl. Up weight- 5240 kg Specific ground-load capacity (1,89 to/m²) Pod-inside-diameter max. 90mm, bearing rods diameter 42,4 mm Side panels - total all over the overall height Protection lattice from 2,2 metres over the floor to the over edge overall-height Load chain as a hollow-bolt chain Kjdpebgdv Ijfx Ag Ujdg Fraction strength 100 kN, division 50mm = bearing rods-hanger system raster Rotation speed ca. 5,5 m/min Control with a key-switch with return (TOTMANN) for switch on/off Nominal voltage 400 V; 3N; 50 Hz mains (net) connection-pipe with CEKON-plug 16A Mains (net) fuse (construction sided)- 10A inert NO Price on request

Year of construction: 2004, condition: excellent (used), The Multivac R230 packaging machine is an advanced machine used mainly in the food industry for packaging a variety of products such as meat, cheese, seafood, delicatessen and many others. This machine is designed to create thermoformed packages, using vacuum to maintain the freshness and quality of the packed products. Equipped with a Busch RA 0100B vacuum pump and constructed of stainless steel, the Multivac R230 is designed to work with a film width of 320mm and has features such as various forming and cutting configurations. Its use is common in many branches of the food industry, from bakeries to meat and fish processing. Kjdpfx Aevzt Hueg Uedg

Condition: excellent (used), Year of construction: 2005, Basic data: Production year: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Kdodpfsrfn Rvex Ag Usg Weight: 6000kg Operating voltage: 400/415V 50Hz Power consumption: 20kW Capacity at 20g/l: 1600kg/h Touch screen control panel Powder tank with screw feeder Complete documentation in both paper and electronic form (electrical schematics, CE compliance certificate, user manual) Condition: very good (machine clean and well-maintained, used exclusively for foaming white polystyrene) For an additional fee, our company can arrange transportation, as well as the installation and commissioning of the machine by our technicians at the location specified by the customer.

Year of construction: 2006, condition: repair required (used), Repak thermoformer, type: RE 25, machine number: 2500020, year of manufacture: 2006, 220/240 V, 3 Ph, 50 Hz, 12 kW, 30 A, die: (12x) 85 mm x 110 m Spare parts for sale. Picture 1. Controller, electronic components, tools, vacuum pump, frame parts, etc. Includes tools of several sizes. In the condition shown in the picture. Complete forming parts set: 4000 EUR. See Picture 2. Flender motor ZF48-M100LB4, 250 EUR (Picture 3). Busch vacuum pump Wv1000B-001 KDFC, 1200 EUR (Picture 4). Automatic 2-line label printer and spreader, complete: 1500 EUR. Picture 5. Rotary cutter for hard foil: 500 EUR (Picture 6). Outfeed conveyor: 300 EUR (Picture 8). For sale as a set for 4000 EUR, as is. Complete die set: 2500 EUR. Kdsdsu Hz Tdspfx Ag Ujg HMI and electronic parts. Other parts.

Year of construction: 2016, condition: excellent (used), I have 3 pieces. Ksdpfx Agswi E Rye Uedg Brand: Multivac Model: R085 Type: Thermoformer Year: 2016 Production hours: 5,011 Power supply: 400V, 50Hz Power: 7 kW Film width: 420 mm Max. film thickness: Soft or hard film Max. forming depth: 80 mm Cut-off length: 240 mm Machine dimensions (L x W x H): 2,900 × 1,100 × 1,500 mm Machine weight: 700 kg. It is possible to make a tool with any division. Upper film brake with photocell. BUSCH Vacuum Pump We are able to make a new tool for each machine!!!

Condition: used, functionality: fully functional, total height: 3,700 mm, total width: 5,000 mm, total length: 7,700 mm, For sale: well-maintained Hassett International vacuum forming machine. The machine has a maximum working area of 3000 × 3500 mm and can form products up to 1100 mm deep. It is ideal for manufacturing spas, swimming pools, hot tubs, and other large-size products. Technical specifications: • External dimensions: 5000 × 7700 × 3700 mm • Can be disassembled into smaller parts for transport • Maximum sheet thickness: up to 8 mm (acrylic, ABS, etc.) Kdsdpfxow Nhdhs Ag Ueg • The control computer allows switching on only the required heating sections of the oven and adjusting their temperatures – for smaller products, the entire oven does not need to be in operation Included in the set: • Oven (with ceramic heating elements) • Hydraulic lift table • Vacuum pump • Vacuum tank • Computer and control electronics • Worktable • One mould (octagonal, black) The green rectangular mould is not included. The machine is in daily use. Testing on-site is possible, and training can be provided. Upon request, we can provide contact details of a reliable company that can disassemble, transport, reassemble, and maintain the machine in the future.

Year of construction: 2018, condition: excellent (used), The Techno D electronic vibrating channel dosers of the K series are the ideal solution for automatically weighing all products up to 8 cm. Furthermore, the simplicity of maintenance allows use within everyone's reach. All Techno D electronic vibrating channel dosers can be used semi-automatically thanks to the help of a special pedal, automatically, by connecting them to our packaging machines, or on thermoforming, thermosealing and third party machines. Kdodoh Rm Tpepfx Ag Ueg