Used Tft Replacement Monitor for sale (8,186)

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort* Cab: TG3 Future Powertrain Platform GX: Maximum size (wide, long, extra-high), comfort suspension, electrically operated glass sunroof, roof spoiler, and side flaps with aerodynamic extensions. * Seats: Premium driver's seat package (air-suspended, seat heating, lumbar support, shoulder adjustment, armrests), Vario co-driver's seat (rotatable, foldable, non-suspended, armrests). * Sleeping Area: Two beds (comfortable mattress 110 mm at the bottom, standard mattress 90 mm at the top), slatted base, storage compartments, reading lights, sockets. * Air Conditioning: Electric auxiliary air conditioning system, Climatronic, water auxiliary heater (4 kW), permanent ventilation with overpressure to prevent dust ingress. * Interior: Dark Moon Grey color scheme with silver and chrome accents, carpet on the engine tunnel, numerous storage compartments, refrigerator, waste bin, sockets (12V, 24V, 230V, USB). ----Safety & Assistance Systems* Driver Assistance: Electronic Stability Program (ESP), Anti-Slip Regulation (ASR), Adaptive Cruise Control (ACC) Stop and Go, Emergency Brake Assist (EBA) Plus, Lane Departure Warning System (LDW), Cornering Assistant, Attention Guard, Traffic Sign Recognition, Reversing Motion System, Distance Warning System, Intelligent Speed Assistant (ISA), Driver Drowsiness Detection, Collision Warning System for Pedestrians and Cyclists. * Brakes: Electronic Braking System (EBS), ABS, Full Brake Assist, High-Performance Engine Brake (CRB), Retarder Eco, disc brakes front and rear, electronic parking brake, EasyStart hill start assist. * Lights & Visibility: LED Package Plus (headlights, fog lights, cornering lights), High Beam Assistant, automatic headlight activation, LED taillights, side marker lights, work lights, digital mirror replacement system MAN OptiView (heated, curb mirror, front mirror). ----Drivetrain & Chassis* Engine: MAN D3066 LF11, 12.7 l, 382 kW (520 hp), 2,650 Nm, Euro 6e, Common Rail, various filters and protection functions. * Transmission: MAN TipMatic 14.33 with retarder, various driving programs (Efficiency Plus, Manoeuvre, Idle Speed Driving), heat exchanger, reinforced single-plate clutch. * Axles & Suspension: 4x2, front axle 7,500 kg (leaf suspension, parabolic, 1-leaf, steel), rear axle 13,000 kg (air suspension), rear axle differential lock, stabilizers, shock absorbers, four-link suspension. * Tires & Rims: Continental tires (front axle 385/55R22.5, rear axle 315/70R22.5), Alcoa Dura-Bright EVO rims, tire pressure monitoring system with temperature display. Dkodpfxszd Ni Ho Aa Ieu ----Electrical System & On-Board Power Supply* Batteries: 2 x 12V, 210 Ah AGM, maintenance-free, electrical main battery switch, fuse box, comfortable external starting capability. * Generator: 28 V, 180 A, 5,000 W. ----Infotainment & Connectivity* Systems: MAN Media System Professional Navigation (12.3 inches), Advanced sound system with subwoofer, smartphone integration, online traffic information, connectivity board module, integration of MAN apps. * Controls: Multifunction steering wheel (leather, height and tilt adjustable), MAN SmartSelect with touchpad, Professional instrument panel (12.3 inches). ----Superstructure & Interfaces* Saddle Coupling: JOST JSK 42 K0, 2 inches, automatic lubrication, slide bearing, various electrical and pneumatic connections for the semi-trailer. * Tanks: 1100 l diesel (690 l left, 410 l right, aluminum), 165 l AdBlue (left, aluminum with plastic inner coating), lockable tank closures. --

Condition: new, mileage: 10 km, power: 125.03 kW (169.99 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, tire condition: 100 %, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Equipment: ABS, EBS, air conditioning, airbag, cruise control, electronic stability program (ESP), non-smoking vehicle, power assisted steering, traction control, New Renault Master chassis, L3 2.0 170 hp + insulated body Standard equipment: • Option: socket on the B-pillar • Tire pressure monitoring system • Rain and light sensor • Steel underrun protection • “Wide View” interior mirror • Full-size spare wheel • Standard tires • Lane keeping assist • EMRD3 approval criterion • LED low beam and daytime running lights • RCall system • Rear parking sensors • Driver fatigue warning • Traffic sign recognition • Emergency braking assist • Driver airbag • Side marker lights • Central locking • ABS • Cruise control with speed limiter • Wireless smartphone charger • 10-inch “OpenR Link” multimedia system with wireless smartphone mirroring • Manually operated air conditioning • Electrically adjustable, heated, and manually folding exterior mirrors • Height-adjustable seatbelt • Folding key • Two-level adjustable plastic steering wheel • Interior mirror • Electrically operated front windows, including pulse function • Driver’s seat with armrest and lumbar support • 2-seater “Mobile Office” bench seat with storage compartment • Cabin lighting • 12V socket in the cabin • Extendable passenger-side storage compartment • Trim of the partition to the driver's cabin with carpeting • Lockable storage compartment in the dashboard • Analog driver displays with 3.5-inch TFT display (monochrome) ENGINE • Engine type: Blue dCi 170 • Displacement (cm³): 1998 • Number of cylinders: 4 • Number of valves: 16 • Maximum power kW (hp): 125 (170) • Maximum torque (Nm): 380 – 1500 • Fuel type: Diesel • Emission standard: EURO VIe Dkedpfxjz Ezlts Aa Iou Insulated body • Internal dimensions: 4.20 x 2.10 x 2.10 • Intermediate frame made of cold-formed steel profiles, hot-dip galvanized • Walls and roof of the body (40 mm thick, RTM process) consist of a 3-layer panel made of high-quality laminate, glass fiber reinforced using polyester resin, designed as sandwich panels with insulation. • Interior walls coated with reinforced AT laminate • Front wall and roof prepared for the installation of a selected refrigeration unit • Insulated floor, with an anti-slip layer • Aluminum exterior and interior corner profiles • Two-leaf rear door, opening 270°, with exterior locks • Side doors of the body • Door handles, fittings, locks, and the frame of the rear door made of stainless steel. • Plastic wheel arches, equipped with mud flaps. • One LED light • A set of cargo securing rails • Roof spoiler • 2 drain openings Net price for the complete vehicle: 43,900.00 EUR Optional equipment: ➢ Rear view camera: 350.00 EUR ➢ Carrier Citimax 350 L.A. refrigeration unit: 5,550.00 EUR (Power supply exclusively via the vehicle engine and heating with hot gas) ➢ Carrier Xarios 300 refrigeration unit: 7,600.00 EUR (Power supply via the vehicle engine and the 220-V power grid) ➢ Carrier Xarios 350 unit: 8,800.00 EUR (Power supply via the vehicle engine and the 220-V power grid)

Condition: new, power: 480 kW (652.62 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 42,990 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, retarder, soot filter, traction control, trailer coupling, - Adaptive Cruise Control - Heated mirrors - Leaf spring suspension - Differential lock - Low noise - Intarder - Air conditioning - Particulate filter - PTO (Power Take-Off) - Rear view camera - Toolbox - Tow hitch X TO GO offers you immediately available new vehicles from our location in Porta Westfalica/Germany, under the "EUROMIX TO GO" program. For all customers who are in an urgent need (short-term capacity expansion or replacement investment). Your advantages: - Immediately deployable complete vehicles (concrete mixers/tippers) - Immediate availability directly from the manufacturer - Superstructure, assembly, commercial vehicle - Best price-performance ratio - Financing options - Trade-in of your old vehicles MAN TGS 41.480 BB 8x4 EURO 6e EuromixMTP 3-sided tipper, crane Hiab 228-6 Vehicle data Year of manufacture: 2026 New vehicle MAN TGS 41.480 8x4 BB CH Concrete mixer chassis Wheel formula: 8x4 Permissible total weight: 41,000 kg Wheelbase: 2,505 mm Engine: MAN D2676 353 kW (480 hp) 2,450 Nm torque Emission standard: Euro 6e MAN TipMatic 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Cab NN (narrow, medium-long, normal height) Cab color: Pure white (RAL 9010) Engine & Drive MAN D2676 Euro 6e engine 480 hp / 2,450 Nm MAN TipMatic automatic transmission Efficiency driving program Maneuvering program Idle Speed Driving Rocking function High-performance engine brake MAN PriTarder with MAN EVBec Heated fuel filter Fuel pre-filter with water separator Gearbox auxiliary drive, switchable Preparation for engine auxiliary drive Chassis Dksdjznt R Nepfx Aa Iju Wheel formula 8x4 Leaf spring suspension front and rear Front axles 8,000 kg Rear axles 13,000 kg Differential locks on both rear axles Axle ratio i = 3.63 Front, rear and second rear axle stabilizers Emergency steering pump Wheels & Tires Steel rims 9.00 x 22.5 Tires 315/80 R22.5 Tire pressure monitoring system (TPM) Tire temperature display Tire pressure display for trailer Wheel nut covers Cab & Comfort Cab NN Air-suspended comfort driver's seat with armrests Co-driver's seat with storage box Multi-function steering wheel 12.3-inch professional instrument cluster Digital tachograph MAN Media System Advanced with navigation MAN SmartSelect operation MAN sound system Smartphone integration (Apple CarPlay/Android Auto) Online Traffic Connectivity Board Air conditioning Electrically adjustable and heated exterior mirrors Curb mirror Front mirror Light sensor Central locking Two vehicle keys Several storage compartments Roof hatch Tinted windshield Safety equipment Electronic Stability Program (ESP) Anti-lock braking system (ABS) Traction control system (ASR) Electronic Braking System (EBS) Full brake assist Turning assistant Front Detection Traffic sign recognition Driver Monitoring System Reversing Motion System Cruise control LED daytime running lights Fog lights Electrically heated mirrors Tire pressure monitoring system ...

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 300 kg, workpiece height (max.): 1,800 mm, workpiece length (max.): 7,200 mm, fuel: domestic gas L, Eisenmann Powder Coating System – Complete System for Sale A high-quality, industrial powder coating system from the renowned manufacturer Eisenmann is for sale. The system was installed in 1995 and has been continuously modernized and kept up-to-date technologically. It is currently in operation and can therefore be inspected under real operating conditions. The system is characterized by its high reliability, robust industrial design, and long-term operational safety. Thanks to ongoing modernizations, it offers an economical solution for companies looking to expand their coating capacity or replace an existing system. Technical Data • Manufacturer: Eisenmann • Year of Construction: 1995, but continuously modernized • Condition: In operation / ongoing production • Maximum workpiece dimensions: 600 × 1,800 × 7,200 mm (W × H × L) • Water dryer: max. 290 kW (natural gas), modulating, manufacturer Elko • Powder dryer: max. 460 kW (natural gas), modulating, manufacturer Elko • Heating boiler: max. 460 kW (natural gas), modulating, manufacturer Elko • Workpiece weight / carriage: 35 carriages with a workpiece weight of 300 kg • Coating technology: Automatic powder coating with Gema Magic-Cylinder system • Manual coating: Gema manual coating system for rework and special parts • Modernizations: Continuously updated to the latest technology • Pretreatment: renewed in 2024/25 by Euroimpianti, a 5-chamber system independent of chemical suppliers was installed. The system is currently operated with Alufinish chemicals in a chrome-free process. The pretreatment has a fully automatic Medotec chemical dosing and monitoring system. The pressure pumps are also monitored to ensure that the pretreatment is 100% effective. The chamber width is designed for 700 mm. The cycle time is currently 5 minutes/chamber, but can be adjusted individually. System Equipment • Conveying technology with automatic workpiece transport Djdpfoz E R Absx Aa Ieku • Pretreatment area • Drying and curing technology • Automatic powder coating • Powder recovery system • Gema Magic-Cylinder application technology • Gema manual coating system with corona and tribotechnology • Control and regulation technology • Wastewater treatment • Demineralized water treatment, 2-fold redundant Special Advantages • System is currently in productive use • Continuously maintained and modernized • Proven Eisenmann quality for continuous industrial operation • Suitable for large and long workpieces • High coating quality and process reliability • Immediate availability upon agreement • Large package of spare parts for pretreatment/pumps/application/conveying technology available The system is particularly suitable for companies in the fields of metal processing, steel construction, mechanical engineering, vehicle construction, and industrial contract coating. Since 2015, the system has consistently achieved GSB Master Seaproof certification. An inspection of the system is possible at any time by appointment. We will gladly provide further technical documents, layout drawings, photos, as well as information on throughput, oven dimensions, and conveying speed to interested buyers. Price: Negotiable Location: 7344 Stoob

Condition: reconditioned (used), functionality: fully functional, Profile cutting center Scarabeo 55 CNC cutting center with 1 controlled axis, designed to cut PVC profiles with the highest cutting speed and quality. It consists of four different components connected in an automatic line: 1. Automatic bar stock magazine - steel body with 6 grippers moved by belts, driven by electric motors - max. capacity 8-10 profiles (depending on their width) - equipped with a bar presence detection device 2. Automatic Profile Feeding Unit 3. Automatic cutting unit - ø 500 mm blade - electromotor 3 kW, 2,800 RPM - cuts at three main angles: 45° – 90° – 135° - special centering device which allows the blade center of rotation to be positioned in the center of the profile section, so that wedge cuts can also be made automatically - equipped with a special evacuation system for waste and cutting chips - fully enclosed with a front door for free access to the cutting area for calibration, cleaning, and maintenance purposes - pneumatic pistol for blowing chips Dsdpfx Aaerungae Isku 4. Automatic unloading unit - automatic discharge device with pneumatic control - flat table for storing cut profiles - safety guard for moving parts Power: 7.2 kW Weight: 1,500 kg - Industrial computer - TFT color LCD screen - Keyboard - data retrieval from the keyboard or ON-LINE - control of each function on the monitor - Virtually unlimited number of data on the profiles to be cut - label printer with choice of format and letter size - collection of data on the remains of cut profiles (waste) - the ability to collect statistical data (weekly and monthly report) - Automatic fault diagnosis Sizes: width: 2300 mm, length: 12500 mm Completely refurbished, 6 months warranty on parts. Ready for work Available for viewing at the company's headquarters.

Condition: used, mileage: 9,300 km, power: 346 kW (470.43 HP), first registration: 08/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Like-new and excellently maintained M.A.N. 18-ton TGS flatbed truck with Palfinger PK 14.502 SH crane featuring 6-stage outriggers, a side reach of approximately 17 meters, and a vertical reach of approximately 20 meters, with remote control, 5 + 6 control circuits, a 6.20 m long flatbed, a payload of 6.1 tons, a 470 hp engine, and a wheelbase of 5.50 m, with only 9,300 km on the odometer, auxiliary drive, air suspension on the rear axle, intarder, air conditioning, auxiliary heater, digital mirror replacement system MAN Opti_View, and more. Equipment: 20,500 kg permissible total weight TGS TN long cab with bed and rear window Wheelbase 5,500 mm Euro 6 e engine 4x2 drive Unladen weight 11,860 kg Payload 6,140 kg with 18,000 kg permissible total weight Dodpfx Ajz Hhk Esa Isku Payload 8,640 kg with 20,500 kg permissible total weight New aluminum flatbed with split side panels and 4-way retractable boarding Flatbed dimensions approx. Length 6.20 m x Width 2.48 m x Height 60 cm Palfinger PK 14.502-SH folding crane, mounted behind the cab The crane has been inspected at a Palfinger workshop UVV crane certification valid until October 2026 Max. lifting moment 13.8 mt Only 610 operating hours according to the hour meter PAL com P7 remote control Engine Start/Stop with RPM increase Crane with 6-stage outriggers Rotation servo and grab control Oil cooler 10.5 kW Crane outreach up to 16.80 meters Lifting capacity at approx. 4.20 m / 2,950 kg // 6.20 m / 1,840 kg // 8.20 m / 1,300 kg // 10.30 m / 970 kg // 12.50 m / 780 kg // 14.60 m / 660 kg // 16.80 m / 530 kg 2-point hydraulic stabilizers with pivoting supports Transport position monitoring HPSC additional function 2. ballast Auxiliary drive, gear-dependent, type NH/4c, without flange, f=0.97, position approx. 3:30 Differential lock in rear axle MAN TipMatic 12.26 DD transmission MAN intarder with MAN EVBec, adjustable MAN Idle Speed Driving transmission function MAN freewheeling transmission function Air conditioning, Climatronic Water auxiliary heater, 4 kW Trailer hitch, ring-feder type 400 G 150A with pneumatic connections Permissible total weight of combination 44,000 kg Trailer load 26,470 kg Front axle with leaf suspension and rear axle with air suspension Front axle 9,200 kg, rear axle 13,000 kg Axle ratio i=2.85 Stabilizer for front and rear axle MAN EasyStart hill start assist Full brake assist Emergency brake assist EBA EBS ABS ASR ESP Lane departure warning LDW MAN Attention Guard Reversing warning Cruise control Sun visor Multi-function steering wheel MAN EasyControl control panel, 4 functions operable from the outside when the door is open Glass sunroof, electric Electrically adjustable and heated exterior mirrors Electric windows MAN SmartSelect infotainment control with touchpad and direct access buttons MAN Media System Professional Navigation 12.3 inch MAN Sound System Digital side mirrors Driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating Seat covers in comfort quality 2 air horns on the roof 2 revolving warning beacons, pre-installed Like-new condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information is without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2475

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: M250.81009, Technical characteristics: # Main Drive: * Connected Load: 400 V/50 Hz / 43 kW * Main Spindle Drive Power (100% duty cycle / 40% duty cycle): 18 kW / 28 kW * Main Spindle Torque: 300 Nm * Spindle Speed Range: 0-4500 rpm * Spindle Nose: DIN 55026-A6 # Working Area: * Rapid traverse, X-axis: 60 m/min * Rapid traverse, Z-axis: 30 m/min * Feed force, X-axis: 10 kN * Feed force, Z-axis: 10 kN # Control System: * Siemens SINUMERIK 840Dsl * 15'' TFT monitor # Working Accuracy: * Axes (X / Z): ±0.001 mm * Spindle (C-axis): ±0.01° # Tool Carrier: * EMAG Flange Turret, Generation C361 - Capto C5 * Tool shank diameter: TN340009 * Max. tool dimensions: Workpiece-dependent * Tool change times (turret / driven tool): 0.03 min / 0.04 min * Max. speed, driven tool: 6000 rpm Dkodpfx Aaexvx T Sj Iju * Max. torque, driven tool (100% duty cycle / 10% duty cycle): 15 Nm / 3.5 kW / 40 Nm / 8.5 kW # Coolant System: * Standard delivery pressure / Max. delivery pressure: 7 bar * Pressure range for internal coolant supply: 7 bar (non-adjustable) * Coolant tank capacity: 360 liters # Part Handling: * No part catcher installed. Parts are loaded and unloaded via automation. * Ambient conditions (Room temperature / Humidity): up to approx. 30°C / max. 50% * Noise levels (Sound pressure / Sound power): 78 dB(A) # General Data: * Machine dimensions (L x W x H): 3900 mm x 1500 mm x 3200 mm * Machine weight: approx. 7,000 kg Main Features and Capabilities: # Vertical Design: Optimized for chip evacuation and convenient loading/unloading. # Control: Siemens SINUMERIK 840Dsl with integrated S7-300 PLC and 15'' TFT monitor. # High Precision: Positioning accuracy in X and Z axes of ±0.001 mm. # Main Spindle: High power and wide speed range. # Automated Loading/Unloading: Workpieces are handled automatically through integrated automation systems. # Driven Tools: Capability to use driven tools for extended machining, including drilling and milling operations. # Chip Conveyor # Equipped Chuck: EMB3 Expanding Mandrel (Autoblock) # Capto C5 Tool Holders on Turret (for external/internal machining, 2 units & 2 driven tools) # Tool Load Monitoring: Artis system capability available

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107964, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW Dodpfxjxw Srko Aa Isku - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Holder with Motorized Tools - Tool holders with cylindrical shank according to DIN 69880: 12 - BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions: Length = 4350 mm with chip conveyor, Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical Design: Enables optimal chip evacuation and easy loading/unloading. - CNC Control: GE Fanuc FS 32i B. - High Precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales. - Main Spindle: High power and wide speed range. - In-process Measurement: Equipped with Marposs T25 measuring probe. - Automated Loading/Unloading: Integrated automation for part loading and unloading. - Live Tooling: Capability for driven tools expands machining to drilling and milling operations. - Tool Life Monitoring: Sister tool management for tool life tracking. - Chip Conveyor - Fully Enclosed Work Area with Work Area Lighting - Documentation: Electronic available; hardcopy/incomplete book. Machine Status: NOT OPERATIONAL - Cooling pump x2 units - Live tool drive motor - Lubrication pump - Operator panel - touchscreen needs replacement - Hydraulic block valves x3 - Hydraulic loading door cylinder - Rotary joint - Lubrication pressure switch - Safety door, Euchner type

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Dkodpfxowrcwpe Aa Iou Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Dksdpfx Asy Hkgbja Iju Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,300 kg, color: grey, gearing type: automatic, number of seats: 8, total length: 5,450 mm, total width: 2,032 mm, total height: 1,997 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal Number: 4532. CHO26.TT51959 LOCATION: 04758 Oschatz, Filderstädter Straße 10 Phone number for inquiries: Mr. Enrico Schieler: 03435 ? 90 90 22 or ----SPECIAL EQUIPMENT * Trailer hitch, electrically swiveling * H7 AGM double battery * 2-zone automatic climate control - with automatic temperature control, separately adjustable for driver and passenger side - auxiliary heater, electric * Fuel tank 70 l * Paint: Metallic * Heated steering wheel * Matrix-LED headlights, adaptive - LED low beam including all-weather light - LED high beam, glare-free - LED daytime running lights including integrated LED turn signals in the front - LED cornering light, static - Speed-dependent headlight range adjustment - LED taillights * Large center console * Exclusive package - Panoramic sunroof - Rear seat package 21 (6 rear seats, sliding doors, left and right, 2nd row with 3 individual seats, outer seats heated, middle seat with folding table on the backrest, 3rd row with individual seats) - 15 B&O speakers - Ambient lighting * Technology Package 6: Exterior mirrors with turn signals, electrically adjustable, heated, automatically folding, navigation system, blind spot assist incl. CTA rear cross traffic alert, pre-collision assist, camera and radar-based driver drowsiness detection, lane keeping assist, lane departure warning, lane change assist, traffic sign recognition, wrong-way driving warning, park pilot system front and rear, adaptive cruise control with Stop&Go, surround view camera * Non-opening panoramic sunroof * B&O sound system with 15 speakers and up to 1000 watts Dedpfxoy Sqzcj Aa Ioku * Ford audio system with 13-inch multifunction display and Ford SYNC 4 incl. navigation - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - Vehicle modem - 13 TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Alloy wheels 7.5 J x 19 in Titanium X design in Pearl Grey with 235/50 R19 111/109T tires * Sliding door with power assist - supported manual closing of the sliding door * Parking heater (fuel-fired water heater) with remote control OTHER EQUIPMENT * 2-stage unlocking for passenger compartment * ABS * Airbag passenger side * Airbag driver side * All-wheel drive * Exterior mirror housings in vehicle color * Brake light, third * Flat roof * Roof console * Diesel particulate filter * Tachometer * ESP * Vehicle modem - 5G modem, WLAN hotspot - Information on the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the Ford app - Current traffic information in real time (in conjunction with the navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) * Power windows front * Parking brake, electric * Ford Key Free system * Heated windshield * 8-speed automatic transmission * Glove compartment with lockable lid * Rear window, heated * Rear window wiper * Rear swing door * Interior lighting in passenger compartment * Interior lighting front * Rear air conditioning * Load space lighting (LED) * Driver drowsiness detection * Emergency assistance * Rear seat package 14: 6 rear seats, includes: - 2nd row, 3 individual seats, middle seat with folding table on the backrest - 3rd row, 1 individual seat and double bench seat * Tire repair kit * Tire pressure monitoring system * Gear lever on the steering column * Windshield wipers with rain

Condition: excellent (used), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber – Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization for enhanced operational safety. Important Note: Due to these safety features, the test chamber is software-limited to a temperature range of −42 °C to +150 °C. The chamber is ideally suited for: - Li-Ion battery testing - Electronics and assembly testing - Temperature and climate stress tests - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feed-throughs included as standard: R1: Ø 125 mm L1: Ø 50 mm Data for temperature tests: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Operating data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Dksdpfx Aozimfvja Iou Weight: 470 kg Important Safety Information for Buyers! The following servicing steps are performed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (See image) (Specifications and technical data are subject to change and errors are excepted!) If you have further questions, we are happy to assist you by phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temperature Deviation (Temporal): ± 0.1 to ± 0.5 K Temperature Deviation (Spatial): ± 0.5 to ± 2.0 K Temperature Change Rate (Cooling): 5.0 K/min Temperature Change Rate (Heating): 6.5 K/min Heat Compensation at +20°C: 3000 W Dksdpfszg Tp Aex Aa Iju Heat Compensation at -20°C: 3000 W Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test Chamber Volume: 335 Liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated Power: 10 kW, Rated Current: 21 A Sound Pressure Level at 1m Distance (Free-Field Measurement): < 69dB (A) Side Opening: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R-23 Weight: Approximately 570 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers will be subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of Supply: (See Image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for buyers: Dsdpfxsziyxpe Aa Ijku For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 100 mm, spindle speed (max.): 50,000 rpm, spindle motor power: 3,600 W, number of axes: 3, This 3-axis DELTA LGT2113 PRO gantry milling machine was manufactured in 2016. It features a working area of 2100 mm in the X-axis and 1300 mm in the Y-axis, equipped with a powerful 3.6 kW spindle capable of reaching 50,000 rpm. The machine includes a 12-position automatic tool changer and a 4-zone vacuum table, making it suitable for various milling and specialized cutting applications. If you are looking to get high-quality milling capabilities, consider the DELTA LGT2113 PRO machine we have for sale. Contact us for further details. • Tool taper: HSK 25 • Number of tool slots: 12-position automatic tool changer. • Main electronic connection: 380 V, 50/60 Hz • Pump drive power: 5.5 kW each • Gantry-type CNC milling machine • Italian-made machine • 4-zone vacuum table • Designed for specialized industrial applications, especially for the production of tooling used in the printing industry • Also suited for a wide range of general milling operations • X and Y axes: Rack and pinion drive • Z axis: Ball screw drive • Automatic centralized lubrication system • Liquid-cooled spindle • The spindle was completely overhauled a few months ago, including bearing replacement, and is currently in excellent working condition • Integrated Blum tool measurement system with optical transmitter/receiver (probe not included) • 2 vacuum pumps • Capacity: 250 m³/h each • Power supply for vacuum system: 230/400 V, 50 Hz • Windows 10 operating system • Proprietary 2.5D control software Dkodpfezk Ipxsx Aa Iju • Deltacam CAM software • 17” TFT display • Dust extraction system (vacuum cleaner not included) • Oscillating knife head for precise cutting of rubber, foam and similar materials, allowing the machine to perform both milling and specialized cutting applications • Minimum Quantity Lubrication (MQL) system for improved machining performance and extended tool life • The machine is currently under power and can be inspected in operation • It is no longer fully utilized, which is the reason for its sale • The machine is in good technical condition and the recently refurbished spindle is operating flawlessly

Condition: used, mileage: 91,540 km, power: 115 kW (156.36 HP), first registration: 10/2017, fuel type: gasoline, next inspection (TÜV): 09/2026, color: black, gearing type: mechanical, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, Special equipment: Business package, exterior mirrors with blind spot assist, driver assistance system: adaptive high beam assist, suspension for increased ground clearance (off-road chassis), tailgate with automatic opening and closing system, infotainment system: Remote Online, black headliner, cargo compartment package, light and visibility package, metallic paintwork, tire repair kit (Tirefit), reversing camera, heated windshield washer system, mirror package, 8.0-inch TFT color display Dkodoxiuppepfx Aa Iju Additional equipment: Adaptive brake light, driver/passenger airbags, active hood, traction control system (ASR), electrically adjustable and heated exterior mirrors, both sides, exterior mirrors in vehicle color, outside temperature display, front pelvis airbags (Pelvisbag), integrated turn signal in exterior mirrors, AMG Line design and equipment line, automatic headlight activation, driver assistance system: active brake assist, driver assistance system: Attention Assist (drowsiness detection sensor), driver assistance system: collision warning system with brake function (Collision Prevention Assist), electric windows front and rear, electric parking brake, laminated glass windshield, luggage compartment cover/roller blind, infotainment system: Mercedes me connect, Isofix child seat attachment on the rear seat, body: 5-door, Keyless Go start system, driver’s knee airbag, window airbag system, Mercedes-Benz emergency call system, model updated, engine 1.6 liter - 115 kW CAT, wheelbase 2699 mm, tire pressure monitoring system, trip computer, split-folding rear seat backrest, low emissions according to Euro 6, front side airbags, height-adjustable front left seat, passenger airbag occupancy sensor, start/stop system, storage compartment under cargo floor, bumpers in vehicle color, exterior door handles in vehicle color, underride protection, warning/status indicator for rear seatbelts, heat-insulating glazing.

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 50,000 kg, spindle motor power: 65,000 W, spindle speed (max.): 2,000 rpm, table length: 2,500 mm, table load: 25,000 kg, table width: 2,000 mm, tool weight: 40,000 g, number of slots in tool magazine: 40, swivel angle B-axis (max.): 360 °, number of axes: 6, This 6-axis DÖRRIES SCHARMANN Heavycut 1.2 TDV4 was manufactured in 1989. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 2,000 x 2,500 mm with a maximum table load capacity of 25,000 kg. If you are looking to get high-quality boring capabilities, consider the DÖRRIES SCHARMANN Heavycut 1.2 TDV4 boring machine we have for sale. Contact us for further details. Technical Specifications Dedpjzv Ruhjfx Aa Ioku * Control: Heidenhain iTNC 530* X-Axis Travel: 2,500 mm* Y-Axis Travel: 2,500 mm* Z-Axis Travel: 800 mm* W-Axis Travel: 700 mm* V-Axis Travel: 1,500 mm* B-Axis: 360°* Work Spindle Diameter: 150 mm* Tool Holder: ISO 50 DIN 2079* Number of Gear Stages: 3* Table Size: 2,000 × 2,500 mm* Table Height: 1,050 mm* Table Load Capacity: 25,000 kg* V-Axis Feed Rate: 1–10,000 mm/min* B-Axis Feed Rate: 2.4 rpm* X/Y/Z/W Rapid Traverse: 10,000 mm/min* X/Y/Z/W Feed Rate: 1–10,000 mm/min* Gantry Beam Cross-Section: 325 × 325 mm* Tool Magazine: Chain Magazine* Tool Magazine Capacity: 40 tools* Max. Tool Diameter: 340 mm* Max. Boring Bar Diameter: 500 mm* Max. Tool Length: 500 mm* Max. Tool Weight: 40 kg* Tool Magazine Rapid Speed: approx. 40 m/min* Tool Magazine Creep Speed: approx. 1.2 m/min* Coolant System: Coolant through spindle* Coolant System: External coolant nozzles* Coolant Filtration: Paper band filter* Process Monitoring: Adaptive Control* Handwheel: HR 550 FS* DNC: Heidenhain DNC* Load Adaptive Control: Yes* KinematicsOpt: Yes* Global Program Settings: Yes* HDR and SIK: Yes Additional equipment / accessories * WFK 100 S* WFK 50 S* Automatic mounting of milling head* Automatic milling head clamping* Milling head drive via controlled shaft* Tool cooling with 4 nozzles* Chip conveyor* Torque monitoring* Position displays Retrofit / Modernization in 2013 * CNC Control: Heidenhain iTNC 530* 19" TFT colour flat-panel display BF 760* TE 745 TouchPad with integrated machine control panel* HR 550 FS electronic handwheel with grid and connection components* HDR and SIK* Global Program Settings* KinematicsOpt* Load Adaptive Control* Heidenhain DNC Technical Specification Taper Size ISO 50 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, spindle motor power: 30,000 W, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm • Control: Okuma OSP P300L (OSP Suite), 15" screen • Configuration: Main spindle (left) + sub-spindle (right), Y-axis, turret with driven tools (radial tool mounting) • Max turning diameter: 340 mm • Spindle speeds: • Left (main): 42–4,200 rpm • Right (sub): 50–6,000 rpm • Spindle motors: • Left (main): PREX 30/22 kW • Right (sub): PREX 11/7.5 kW • Special main spindle (“Big Bore” option): Ø91 mm, nose JIS A2-8, 42–4,200 rpm, PREX 30/22 kW, max torque 700 Nm • Control/monitoring functions: • Spindle orientation • Cutting load monitoring (“Load Monitor”) selectable for all axes and spindles • One-Touch IGF M-E conversational programming • Tool life monitoring: by workpiece count, by cutting engagement time, by cutting load; automatic sister-tool change or stop/alarm if no replacement • Machine options: Additional flushing for left slideway covers Additional equipment Dodjx D Rvnepfx Aa Ieku • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets • Workholding (chucks) • SMW‑Autoblok BBD250‑77 / A8, hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder VN170‑77, drawtube ID 72 with cylinder flange • Max speed: 4,000 rpm; bar capacity: Ø72 mm • Kitagawa B206 (Ø170 mm), hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder SR1146, drawtube/cylinder flange, ejector • Max speed: 6,000 rpm • Part handling • Part catcher, swing-bucket type, Ø80 × L150 mm, max 5.8 kg • Chip management • Cromar chip conveyor for LB3000 EX II C1000, slat type, right-hand discharge • Bar feeding and interfaces • Bar feeder interface (OSP P300L) • IEMCA KID 80+ bar feeder (SX – Left) for Okuma LB3000 EX II • Includes: 7" touchscreen HMI, mechanical/electrical interface kit, additional light kit, roller guide kit for round/hex bars, spindle extension, bar pusher D=26 mm, bar pusher D=15 mm, paper manuals • Accessories: Floor frame for longitudinal movement in Z; spindle liner/reduction tube Technical Specification Counter Spindle Yes Driven Tools No

Condition: used, mileage: 677,250 km, power: 210 kW (285.52 HP), first registration: 11/2012, fuel type: diesel, number of seats: 25, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Year of construction: 2012, Equipment: ABS, air conditioning, * Our internal reference: 1186 * O 530 K Citaro - Facelift * First registered: 11/2012 -> Model year 2013 * 1st owner in Germany * Inspection book available! * We are still awaiting service records * 210 kW - EURO 5 / EEV * ZF automatic transmission * Retarder * Lifting/lowering/kneeling function * ABS, ASR * 60 standing places * Plus additional folding seat at the pram space * 1 x wheelchair space * LED destination display with control unit * Interior pre-wiring for TFT monitor * Radio * TILT WINDOWS * AIR CONDITIONING * Auxiliary heater * Manual folding ramp Dkedpfx Aey Evg Doa Iou * Note: * The buyer is responsible for independently inspecting the condition and equipment of the vehicle/goods! * All information given without liability * Subject to prior sale * Please refer to our terms and conditions

Condition: used, functionality: fully functional, machine/vehicle number: 29109, mileage: 43,900 km, power: 70 kW (95.17 HP), first registration: 03/2020, fuel type: diesel, overall weight: 6,000 kg, axle configuration: 4x2, wheelbase: 2,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, loading space volume: 5 m³, Equipment: ABS, air conditioning, airbag, cruise control, power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Lrsbn Ed Iezktyvs E Ior Further comparable vehicles are available upon request. Dsdpfjzwflksx Aa Ioku 4-cylinder engine, R4 Euro VI OBD Step D, ABS, ASR, ESP, disc brakes, leaf spring suspension, reversing warning sound, fuel tank 70 liters + AdBlue Cab: 2 seats, adjustable steering wheel, lane keeping assist, emergency braking assist, heated mirrors, electric windows, air conditioning, pollen filter, radio (Bluetooth/USB), cruise control, central locking, control panel, TFT monitor, immobilizer (transponder) 1.1-meter mounting with top-opening mechanism, work lights, rotating beacons, reversing camera, control panel, steel construction, folding pocket permanently installed on the tipper body.

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Dsdpfx Aajy Hp Rro Ieku Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: used, mileage: 63 km, power: 81 kW (110.13 HP), first registration: 01/2026, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4543.CHO24.PU66035 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT - Airbag (passenger side) - Package: Technology Package 5, exterior mirrors with blinker, electrically adjustable, heated and foldable, audio system, 13-inch multifunctional display, Ford SYNC 4 incl. navigation, blind spot assist incl. CTA, rear parking brake assist, Pre-Collision Assist, camera- and radar-based, driver alertness monitor, wrong-way driver warning, lane keeping assist incl. lane departure warning and lane change assist, traffic sign recognition, park pilot front/rear, cruise control, adaptive, intelligent speed limiter, rear view camera, steering wheel, Sensico in leather look, electric safety and ESP - Radio: Ford audio system with 13-inch multifunctional display and Ford SYNC 4 incl. navigation - digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 13-inch TFT multifunctional display - integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa built-in voice assistant FURTHER EQUIPMENT - 2-stage unlocking for passenger compartment - 6-speed transmission - ABS electronic with EBD - Airbag, driver side - Exterior mirrors, electrically adjustable - Exterior mirror housing, plastic, black - Battery: H7 AGM single battery - On-board computer - Roof, flat - Roof console - Double-wing rear door/180° (without window) - Rev counter - Third brake light - Electronic safety and stability - Window lifter, electric, front - Parking brake, electronic - FordPass Connect - Windshield, heated - Floor mats: rubber floor mats, front - Grab handle, driver and passenger side - Glove compartment with lockable lid - Interior lighting, front - Automatic climate control, front - Headrests (3) - Fuel tank 55 l - Load compartment lighting (LED) - Steering wheel: steering wheel, plastic - Center console, small - Emergency assist - Package: Technology Package 2 (Trend) - Ford audio system with 13-inch multifunctional display and Ford SYNC 4 - Pre-Collision Assist, camera-based - driver alertness monitor - traffic sign recognition system - wrong-way driver warning - lane keeping assist incl. lane departure warning - park pilot system front and rear - cruise control - intelligent speed limiter with speed limit display - rear view camera - Particle filter: diesel particulate filter - Radio accessories: 4 loudspeakers - Wheel covers - Tire repair kit - Tire pressure monitoring system - Wheels: steel 6.5 J x 16 m. 215/65 R16 R - Windscreen wipers with rain sensor - Headlamps with LED low beam - Sliding door: sliding door, right - Mud flaps, rear - Mud flaps, front - Power steering - Seat belts - Seats: seat package 6A - Start-stop system - Start function Ford Power - Bumper, front and rear, partially in vehicle color - Partition (metal) without window - Door handles, plastic, black-grey - Door hinges, 90 degrees - Recirculation heating - Lashing eyes 6 - Immobilizer Dkedpfxjtr Srlj Aa Ieu - Heat protection glazing, slightly tinted - Central locking with remote control ... and more ---- 1st hand. German version. Errors and prior sale excepted. 2 years factory warranty from registration (extendable on request). We will gladly accept your vehicle in part exchange. Financing/leasing possible even without a down payment! Do you have any further questions? We would be happy to advise you! Although despite existing controls, a deviation of the vehicle from the above description cannot be ruled ou

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.2 kW (7.07 HP), cutting height (max.): 410 mm, BEHRINGER HBE 411 A – Dynamic, NEW MACHINE! THE BEST DEAL! Manual positioning 18 Dodpfx Aaez Atfvo Ieku Cutting monitoring 22 Saw drive 5.2 kW 50-2 Chip conveyor 100 5 Micro 250 Package clamping device 440 Bar start detection 535 Retract cylinder 550 Clamping pressure regulation 832 Line laser 940 Lighting 941 Cutting channel extension Behringer new machines: Come, see, and buy! Immediately available from stock Warranty from date of purchase Do you have a machine breakdown? We offer quick replacements Delivery and installation available upon request Immediately available from stock

Condition: used, Year of construction: 2018, operating hours: 500 h, Throughfeed machining, workpiece machining from below, and automatic workpiece return to the operator. 3 controlled axes: X axis - uninterrupted workpiece transport via DDT (double dynamic transport system) with a brushless motor Y axis - drilling head travel Z axis - drilling - Double "0" reference: new laser generation for detecting the start and end of the workpiece. The program can adjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge materials. - Side stops with rollers consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning on the 0 line. - Rear workpiece outlet - Automatic 4-position tool changer - No workpiece length limitation - Monitor LCD TFT 19" 5/4 - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data Number of independent, vertical spindles: 12 Number of independent, horizontal spindles on the X axis: (2+2) Number of horizontal drilling spindles on the Y axis: (2+2) 1 saw (Ø 100mm) Electric spindle 5 kW with ISO30 taper (RPM 12000-24000) Max. workpiece weight: 80 kg Max. workpiece dimensions: X unlimited, Y 1200 mm, Z 50 mm Min. workpiece dimensions: X 270, Y 185 (70op), Z 4 mm Feed rate: 25m/min Spindle speed: 3500 RPM Max. horizontal tool Ø 12mm Max. drilling depth horizontal on the X and Y axis 30mm Max. drilling depth vertical: 45 mm Max. vertical tool Ø 35mm Air consumption 2000 m3/h Extraction speed 30 m/s Extraction nozzle 2xØ. 100mm + 1xØ.50 mm Motor: 1.7 kw Compressed air: 7 bar Max. air consumption: 60 nlt/min CE STANDARDS Dedpfx Aaezuxdbe Isku - Office software - license - Adjustable zero point for 4-sided formatting - CE compliant - Status: 05/28/2026: approx. 500 operating hours and a new PC has been installed.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Djdpezu Aibefx Aa Ieku Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press