Used Tft Replacement Monitor for sale (7,834)

Condition: used, Year of construction: 2008, operating hours: 43,705 h, functionality: fully functional, machine/vehicle number: 192/2008, total height: 2,400 mm, total length: 1,800 mm, total width: 1,930 mm, workpiece weight (max.): 50 kg, spindle speed (max.): 500 rpm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 3,800 kg, rotational speed (max.): 40,000 rpm, grinding spindle speed: 40,000 rpm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, travel distance X-axis: 400 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 305 mm, grinding spindle motor power: 14,000 W, power: 22 kW (29.91 HP), workpiece diameter (max.): 250 mm, grinding diameter: 250 mm, input frequency: 50 Hz, input voltage: 400 V, grinding wheel speed: 500 rpm, year of last overhaul: 2023, number of spindles: 1, number of slots in tool magazine: 12, Equipment: rotational speed infinitely variable, We are offering this used Deckel S22E universal machining center, year of manufacture 2008. Model: S22 Serial number/year: 192/2008 Machine weight: 3700 kg Maximum wheel diameter: 150 mm Rotational speed: 40,000 rpm Wiring diagram: 2292509 S558 Mains voltage: 3P/N/PE 3x400 V Frequency: 50 Hz Nominal current: 25 A Power consumption: 15 kW Spare fuse: 32 A Control voltage: 24 V Suitable for oil-based grinding: Yes Spindle: Supplied with an additional fully overhauled backup spindle Itsdpjy Nbnnjfx Altjk Spindle cooling: Equipped with external spindle cooling (MTA TAEevo Tech MINI 10, Year 2017, 486x660x876 mm) Fire suppression system: Kraft & Bauer FB 703 TFT monitor: Needs to be replaced If you have any questions or would like more information, please feel free to contact us or call us.

Condition: like new (used), Year of construction: 2024, operating hours: 7 h, functionality: fully functional, total height: 1,620 mm, total length: 1,760 mm, total width: 700 mm, type of input current: three-phase, tank capacity: 285 l, input voltage: 400 V, rotational speed (max.): 2,850 rpm, input frequency: 50 Hz, water tank capacity: 440 l, Water treatment and recycling unit for process water Z 800K HA TURBO FLOC – 2024 | Almost like new For sale, a professional water treatment and recycling unit for process water, model Z 800K HA TURBO FLOC. The system was manufactured in 2024 and has only been in operation for 7 hours, making it practically new. The unit is designed for effective treatment of process water and its subsequent reuse. Thanks to the use of a centrifuge and the Turbo-Floc flocculation system, it significantly reduces water consumption and operating costs for the plant. Technical specifications: treatment capacity up to 1200 l/h, system dimensions: 1760 × 700 × 1620 mm, centrifuge dimensions: 995 × 680 × 580 mm, drum rotation speed: 2850 rpm, RAL 7035 paint finish, automatic water removal from the centrifuge during braking, polyurethane sludge basket, Itedpfxozcybrs Altek electromagnetic safety valve. Buffer tank (285 l): made of HDPE plastic, equipped with a Turbo-Floc system for automatic dosing of coagulant or flocculant, additional filter on the inlet of process water, two float switches controlling the liquid level, pulsed power supply by P-3 pump. Clean water tank (440 l): made of HDPE polyethylene, supplies the devices with treated process water, equipped with an efficient P9 diaphragm pump: capacity 7.8 m³/h, working pressure 4 bar, water level control. Control and monitoring system: monitoring of filling and sludge basket replacement, timer relay and light signaling (flashing lamp), PLC controller E60-420, supply voltage 400 V / 50 Hz, control voltage 24 V DC, protection class IP54, operating temperature from +5°C to +40°C, safety feature that prevents the centrifuge from starting unless the cover is opened and closed beforehand. Additional equipment: DP1 dosing pump for coagulant supply, dosing capacity 0–1 l/h, Turbo-Floc flocculation mixer with mixing blades on both sides of the diagonal, special conical guide plates made of stainless steel, mounted inside the centrifuge. The unit is in excellent technical and visual condition. It is an ideal solution for industrial plants using vibration treatment, where effective water treatment and reuse are required. Year of manufacture: 2024 Operating hours: 7 We invite you to contact us for more information and to arrange a demonstration of the unit.

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Itedpfx Ajzabnzoltok Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs Iedpfxov Sm Rus Altstk • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, • Used device with upgraded cathode systems o LAB6 cathode o Tungsten cathode • EDX (Energy Dispersive X-ray Spectroscopy) allowing direct chemical analysis in the SEM • Lens-mounted 5-channel BSD • Infrared camera mounted on the chamber door • Maintenance by manufacturer (Zeiss and Oxford Instruments) until 2024 • 2x 19” flat screen monitors • Joystick controller for stage movement • Ergonomically designed control console • Software module for automatic centering of any image detail • Stage base plate, motorized X+Y axes Itodpfsy Ep S Rox Altsk • Stage assembly includes tilt, rotation, and Z-axis; removable Accessories • Transport lock and transport castors • 2x Wehnelt + anode + 3 tungsten filaments • Table spacers (3 pieces, different heights) + tools • 1x 9-position sample holder for rods o Collimator shorts 150 o Collimator long etc. 150 o Collimator long 50/80 mm² MK2 • 1x fixed aperture holder • 2x 100 μ VP – aperture • 1x 750 μ VP – aperture • 2x 20 μ aperture • 1x 30 μ aperture • 1x 100 μ aperture • Various tools (tool kit) and sealing rings • 1x Lens-mounted 5-channel BSD (1 EVO BSD DIODE 5 CH Standard, low light sensitivity. With signs of use, possibly for replacement) AZtec Adv Rec. 3.2 + Update 2024

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Iodpfx Aleygn Ibototk Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 210927, total width: 2,000 mm, total length: 15,000 mm, total height: 1,400 mm, The machine is being sold because our company's processing division has been discontinued. This Jagenberg Diana gluing machine is the ultimate all-rounder for folding carton gluing. Most of our folding cartons had an open size between 14 and 30 cm, but with a maximum width of 125 cm, large formats are no problem either. The machine can handle straight-line, crash-lock bottom, as well as 4- and 6-corner gluing. It was operated in single-shift mode without any technical issues. We retrofitted the quality inspection system from hhs, which includes product type detection with an ejection station and glue application monitoring. All belts were regularly replaced. The electric motor has been completely overhauled with new windings. The machine's main drive is via a robust coupling system rather than belts, as is common with later models. The machine is user-friendly, with all units easily accessible. Its overall condition is excellent, with only age-related signs of use. If interested, we can provide a video via email. Itsdpfx Aox R Sn Ieltjk

Condition: like new (used), functionality: fully functional, Cooking Modes AC (Automatic Cooking): Automatic cooking system with recipe images. Manual Cooking: Fan-assisted (30–300 °C), Steam cooking (30–130 °C), Combination (30–300 °C). Programmable Operating Mode: Up to 15 cooking cycles can be saved, with name, image, and recipe information. Clima®: Automatic humidity control. Fast-Dry®: Rapid dehumidification of the cooking chamber. Functionality Display: Customizable, frequently used programs are displayed prominently. One-Touch Start: Automatic start of cooking. Recipes: Folder structure with preview and intelligent recognition. Screen: 7" high-resolution LCD TFT touchscreen. Operation: Scroll wheel with push function. Controls & Features Auto-reverse: Fan reverse for even cooking. Delta T: Monitors cooking chamber and core temperatures simultaneously. Steam Regulation: Automatic condensation adjustment. Settings: Programmable user parameters. Delayed Start: Scheduled cooking times. Fan Speeds: 6 selectable speeds, automatic heat adjustment. Core Temperature Probe: Four-point probe with external interface. USB Port: HACCP data, software updates, cooking programs. Energy Optimization: SN system (optional). Iodpfx Asv Hztaeltetk Service Program: Diagnostics, maintenance indicator. Self-Diagnosis: Pre-use check, audible/visual warnings. LED lighting for improved visibility. EcoSpeed: Optimized cooking temperature, reduced fluctuations. EcoVapor: Automatic steam regulation for water conservation. Cleaning & Maintenance LCS (Liquid Clean) System: Automatic cleaning with recyclable capsules. 7 cleaning programs. Manual cleaning: Optional hand shower. Technical specifications Capacity: 7 × 2/1 GN – 14 × 1/1 GN Insert spacing: 70 mm Space for croissants: 70 / 180 pieces Dimensions: H x W x D 850 × 1170 × 950 mm Weight: 180 kg Power: Total 19 kW, Cooking chamber 18 kW, Fan 0.55 kW Power supply: 3N-AC 400 V, 50/60 Hz, 30 A Base frame Material: Stainless steel Mobile: Yes (with casters) Dimensions: H x W x D 860 × 1170 × 800 mm Financing through our bank is also available. komplett-konzept.leasingo.de

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced Ijdpfxexxidae Altetk - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 2040 mm 3 mm 2 mm 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages ??such as German, English ... CNC back gauge Itodpowiri Ajfx Altok - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), EDAG EDAG Huf Endurance Test Stand Intended use: This test stand is intended exclusively for testing components that are capable of rotational and/or translational movement within the scope of an endurance test and within the limits of the following technical specifications. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Control voltage 5, 24 Preliminary fuse 16 A Testing device: Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manually operated slider) 15 N Displacement force (manually operated slider) 10 N Other equipment: P4, 24" TFT monitor (1900 x 1080) Operating system: Windows XP Measurement and control software: LabVIEW 2011 PC plug-in cards: 1 card, NI PCI-6251, 1 card, N1 PCI-7044 Drawer: 500 mm (full extension with automatic closing) Additional load: 500 N Drawer cabinet, lockable: 3 drawers The teach-in endurance test stand is a device for carrying out endurance tests on test objects that can rotate and/or move translationally, e.g., cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See image) Itsdszh U Rdepfx Altek (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2004, WENZEL SCM 500 Smart Coordinate Measuring Machine in well-maintained and fully functional condition. The machine features a robust and compact design, specifically engineered for flexible use directly in the production environment or inside the measuring room. Combined with high-precision guideways, this proven structure ensures excellent measuring accuracy, stability, and outstanding repeatability within a minimal footprint. The SCM 500 Smart is designed for reliable, fast deployment in quality assurance as well as near-line series production, delivering consistent measuring results even under demanding shop-floor conditions. Prior to delivery, the machine will be fully inspected and subjected to a test run by our service technicians in Remscheid to guarantee complete functionality. The system is currently powered up and can be inspected and demonstrated at any time. PC System & Operating System (Upgraded): The machine is already equipped with a modern, high-performance PC system running the latest Windows 11 operating system. The entire configuration meets the current requirements of WENZEL, has been comprehensively tested, and operates with absolute stability, ensuring the CMM is immediately ready for integration into your processes. Optional Services (Subject to Agreement): - Installation and commissioning of the measuring machine within NRW (North Rhine-Westphalia) - Generation of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Determination of probing uncertainty in accordance with DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 Itedpjzkug Rjfx Altek - Accredited according to DIN EN ISO/IEC 17025:2018 - Training courses for the WM | Quartis measuring software - Contract programming for your components Additional Information: Upon request, the machine can be retrofitted with a suitable Renishaw probe system (e.g., PH10 or other upgrade options). The retrofit includes additional services as well as supplementary hardware components, which will adjust the purchase price accordingly. Further software modules, customizations, individual accessories, and clamping systems are available upon request – perfectly matched to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 450 Measuring range Z: 400 mm Measurement uncertainty: Eo = 8,0 + L/250 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2030 PC System: Windows 11 Probing system: TP20 Probe head: PH6 Probe module: 1 × TP20 Standard Force Module Joystick: HT400 Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Itodpfxeytvyxj Altjk Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107786, Technical characteristics: Work Area - Maximum clamping plate diameter: 160 mm Ijdpfx Asxw Slkjltotk - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard closed automation (number of loading stations per workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle as per DIN 55026: Size A5 - Max. speed: 6000 rpm - Power at 100 / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100 / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Toolholders per DIN 69880: 12 × BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm; 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Overall dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: optimal chip evacuation and easy part loading/unloading - Control: GE Fanuc FS 32i B - High precision: positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: high power and wide speed range - In-process control: Marposs T25 measurement probe - Automated loading/unloading: integrated automation feeds and removes workpieces - Driven tools: enhances machining capabilities for drilling and milling - Tool life monitoring with sister tool management - Chip conveyor - Fully enclosed work area; workspace lighting - Documentation: Electronic available; physical manual incomplete Machine Condition: NOT WORKING - Operator panel touchscreen needs replacement - Hydraulic cylinder for loading door broken - Emulsion pump - Hydraulic pump - Spindle clamp/unclamp sensor - Hydraulic accumulator - Turret motor

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 95 kg, input voltage: 400 V, volume flow: 1,100 m³/h, pressing: 2,250 Pa, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Equipment: type plate available, KEMPER ProfiMaster IFA welding fume extraction system – year of manufacture 2018 – 400 V Manufacturer: KEMPER Model: ProfiMaster IFA Year of manufacture: 02/2018 Serial number: 180200349 For sale is a used, fully functional KEMPER ProfiMaster IFA welding fume extraction system. This unit is ideally suited for extracting welding fumes and grinding dust directly at the source and is designed for professional use in workshops and metalworking facilities. The system is in good condition. The filter was replaced on October 6, 2025, so the unit is immediately ready for use. Technical data: Airflow rate: 1,100 m³/h Power connection: 400 V / 50 Hz Motor power: 1.1 kW Rated current: 2.3 A Max. negative pressure: 2,250 Pa Ijdpfjzg T A Ajx Altotk Protection class: IP42 Control: 24 V Weight: 95 kg Continuous operation: 100% duty cycle IFA-approved design Equipment: 3m arm length Mobile design Filter monitoring Easy filter replacement via maintenance flap Robust industrial design Ideal for welding workstations Condition: Used Technically flawless Filter replaced on October 6, 2025 Safety inspection according to inspection label valid until 2026 All information without guarantee.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: M250.81009, Technical characteristics: # Main Drive: * Connected Load: 400 V/50 Hz / 43 kW * Main Spindle Drive Power (100% duty cycle / 40% duty cycle): 18 kW / 28 kW * Main Spindle Torque: 300 Nm * Spindle Speed Range: 0-4500 rpm * Spindle Nose: DIN 55026-A6 # Working Area: * Rapid traverse, X-axis: 60 m/min * Rapid traverse, Z-axis: 30 m/min * Feed force, X-axis: 10 kN * Feed force, Z-axis: 10 kN # Control System: * Siemens SINUMERIK 840Dsl * 15'' TFT monitor # Working Accuracy: * Axes (X / Z): ±0.001 mm * Spindle (C-axis): ±0.01° # Tool Carrier: * EMAG Flange Turret, Generation C361 - Capto C5 * Tool shank diameter: TN340009 * Max. tool dimensions: Workpiece-dependent * Tool change times (turret / driven tool): 0.03 min / 0.04 min * Max. speed, driven tool: 6000 rpm * Max. torque, driven tool (100% duty cycle / 10% duty cycle): 15 Nm / 3.5 kW / 40 Nm / 8.5 kW # Coolant System: * Standard delivery pressure / Max. delivery pressure: 7 bar * Pressure range for internal coolant supply: 7 bar (non-adjustable) * Coolant tank capacity: 360 liters # Part Handling: Itodpoxvx T Ssfx Altok * No part catcher installed. Parts are loaded and unloaded via automation. * Ambient conditions (Room temperature / Humidity): up to approx. 30°C / max. 50% * Noise levels (Sound pressure / Sound power): 78 dB(A) # General Data: * Machine dimensions (L x W x H): 3900 mm x 1500 mm x 3200 mm * Machine weight: approx. 7,000 kg Main Features and Capabilities: # Vertical Design: Optimized for chip evacuation and convenient loading/unloading. # Control: Siemens SINUMERIK 840Dsl with integrated S7-300 PLC and 15'' TFT monitor. # High Precision: Positioning accuracy in X and Z axes of ±0.001 mm. # Main Spindle: High power and wide speed range. # Automated Loading/Unloading: Workpieces are handled automatically through integrated automation systems. # Driven Tools: Capability to use driven tools for extended machining, including drilling and milling operations. # Chip Conveyor # Equipped Chuck: EMB3 Expanding Mandrel (Autoblock) # Capto C5 Tool Holders on Turret (for external/internal machining, 2 units & 2 driven tools) # Tool Load Monitoring: Artis system capability available

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm Itedpfxjy Hp Rro Altjk - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: used, Year of construction: 2009, CNC control, control panel, computer monitor, screen, TFT industrial monitor Itedstp Rf Eepfx Altsk -Control panel: Operating terminal control panel including PC Command Panel -Monitor: FlatmanType FK170SBRGD001 -Control cabinet cooling unit: Rittal type SK 3302100 -Individual components: see photos -Total dimensions: 550/600/H870 mm -Weight: 52 kg

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel • Celeron 733 industrial CPU, 20 GB industrial HDD Itsdpfxszhbf Uo Altek • Standard keyboard and PS/2 mouse • Cutting system/features: • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: • 2x RS-232, 2x USB 2.0, LAN • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) • Spare parts, consumables and starter kit

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107964, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Holder with Motorized Tools - Tool holders with cylindrical shank according to DIN 69880: 12 - BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions Itodpjxw Srkofx Altok - Total dimensions: Length = 4350 mm with chip conveyor, Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical Design: Enables optimal chip evacuation and easy loading/unloading. - CNC Control: GE Fanuc FS 32i B. - High Precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales. - Main Spindle: High power and wide speed range. - In-process Measurement: Equipped with Marposs T25 measuring probe. - Automated Loading/Unloading: Integrated automation for part loading and unloading. - Live Tooling: Capability for driven tools expands machining to drilling and milling operations. - Tool Life Monitoring: Sister tool management for tool life tracking. - Chip Conveyor - Fully Enclosed Work Area with Work Area Lighting - Documentation: Electronic available; hardcopy/incomplete book. Machine Status: NOT OPERATIONAL - Cooling pump x2 units - Live tool drive motor - Lubrication pump - Operator panel - touchscreen needs replacement - Hydraulic block valves x3 - Hydraulic loading door cylinder - Rotary joint - Lubrication pressure switch - Safety door, Euchner type

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Itsdpfx Alsxxz I Retek Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: used, Year of construction: 2010, functionality: fully functional, Technical specifications: System output: up to approx. 2,000 cuts per 8 hours, depending on the cross-sections of the reinforcing bars used Feed magazine: 12 positions, automatically timed Discharge magazine: 12 positions, automatically timed Bar length, maximum: 6,000 mm Bar length, minimum: 400 mm Cutting length, maximum: 4,000 mm Cutting length, minimum: 170 mm Remaining piece processing: 350 mm Profile dimensions: 86 × 70 mm Wall thickness, maximum: 3 mm Functionality and features: • Saw unit with spray medium system • Automatic operation • Lateral discharge in the Z-direction • Screen-based dialog system with loading table display • Direction of travel, depending on the model, from left to right or from right to left Control and hardware configuration: • High-quality PC with a 19-inch TFT color monitor • USB ports • DVD drive • Keyboard • Windows operating system Itjdpjzm I Dhsfx Altok • Remote maintenance via the internet

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 108113, Technical Characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse Z: 30 m/min - Standard automation with closed system (number of loading nests by workpiece diameter: 14/(80–200), 18/(30–160), 30/(30–85)) Main Spindle - Spindle interface per DIN 55026: Size A5 - Maximum spindle speed: 6000 rpm - Power (100% / 40% duty cycle): 18.1 / 13.9 kW - Torque (100% / 40% duty cycle): 77 / 59 Nm Iodpfx Aexxip Aeltetk Tool Holder with Driven Tools - Tool shank per DIN 69880: 12 – BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque (10% duty cycle): 27 Nm; (100% duty cycle): 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions (L x W x H): 4350 mm (with chip conveyor) x 1600 mm x 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical Design: Optimized for chip removal and easy loading/unloading - CNC Controller: GE Fanuc FS 32i B - High precision: Positioning accuracy in X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and broad speed range - In-process control: Marposs T25 measuring probe - Automated loading/unloading: Integrated automation for feeding and removing parts - Live tools: Capability for drilling and milling operations - Tool life monitoring and sister tool management - Chip conveyor & Knoll coolant filtration unit with paper filter and 40 bar pumps (suitable for filtering two machines) - Fully enclosed work area, with work area lighting - Documentation: Electronic version available, printed booklet incomplete Machine Status: - NOT WORKING - LT motor defective, repairable - Operator panel, safety switch, and two buttons broken and need replacement

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Dyemansion Powershot C blasting cabinet Gentle surface cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time you need for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in the automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotary basket and lined with stainless steel. Different blasting nozzles and an ionization system ensure reproducible results. A basket with a soft, replaceable liner protects the parts from damage during the process. Iodpozgr T Tjfx Altstk Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. Thanks to the user-centered design, everything is easily accessible and safe to use. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Stratasys H350 build volume Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: 1kW Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool (PRICE FOR TOOLS: € 2.500.- / FOR EACH TOOL): Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml Itodsn D Ew Ispfx Altsk 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge