Used Textile Cleaning Machine for sale (84,632)

Condition: new, functionality: fully functional, total length: 1,200 mm, total height: 2,100 mm, total width: 2,500 mm, empty load weight: 750 kg, input voltage: 400 V, water tank capacity: 400 l, warranty duration: 12 months, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS This set of devices allows for maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of the DPF DUO Premium: -> A separate dryer doubles work efficiency -> We are the only ones to offer a large-diameter hose that connects to the DPF. A larger diameter = more water = more effective cleaning -> Our filter mounting system is free of elements placed inside the DPF filter tube that could block the water flow. This allows the full performance of the water and air pump to be utilized, shortening regeneration time. -> The large cabin provides the freedom to mount the cleaned filter. The operator, based on their experience, can choose the position in which the filter will be washed. Hodpfx Aoxm Szqea Esg -> Protection against excessive pressure in the filter during cleaning -> Protection against lack of airflow through the filter during drying -> Possibility to individually set the cleaning program according to the filter capacity -> Stable securing of the filter during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Training at the customer's site can be provided The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting the filter structure, restoring up to 99% of the nominal flow rate. Our technicians have dedicated significant effort to ensure that both the cleaning procedures and the detergents used are safe for the environment and machine operators. The operator checks the filter for mechanical damage using an endoscopic camera. If signs of melting, ceramic core cracks, or other apparent mechanical damage interfering with the DPF are detected, regeneration will not be possible. The regeneration process takes place in a closed chamber equipped with filters preventing harmful contaminants from escaping into the environment. Water with cleaning fluid circulates in a closed loop and is filtered throughout the process, significantly extending bath life. The DPF DUO Premium cleans filters using water, chemistry, and air. A precisely selected, computer-controlled sequence of water and detergent dosing, combined with air and impulses generated by compressed air, ensures high regeneration efficiency. After the cleaning process is complete, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be taken before cleaning, allowing subsequent comparison of backpressure values before and after the process. The device is equipped with a printer that allows generating a measurement report. The washing time for filters from passenger cars or light commercial vehicles is 20–40 minutes, which enables regeneration of up to a dozen filters in 8 hours. High efficiency combined with low operating costs guarantees a rapid return on investment.

Year of construction: 2007, condition: used, Power: 35 kW (48 HP) Empty weight: 583 kg Dimensions (LxBxH): 174 x 91 x 175 cm Current frequency: 50 Hz Hedpfx Aovtza Tja Ejg Voltage: 400 Capacity: 350

Year of construction: 2023, operating hours: 50 h, condition: excellent (used), functionality: fully functional, number of tool turrets: 1, Note: This offer concerns the assignment of a leasing agreement. Pulsed cleaning laser Narran ROD 500W, equipped with an IPG Photonics source. The machine is in very good condition, with approximately 50 operating hours, used mainly for demonstrations. Technical data: - Average power: 500 W - Peak power: 2.5 MW - Wavelength: 1064–1070 nm - Frequency: 2–50 kHz - Fiber optic cable length: 10 m - Head weight: 1.5 kg - Dimensions: 1.4 x 0.6 x 1.1 m - Device weight: 195 kg Hodpex Ezw Uefx Aa Eeg - Rated power: 3.5 kW - Power supply: 220/230 V (16A) The following accessories are also included: - TBH LN 265 filter – high-performance extraction system with a compact and mobile design; - Extraction fan with hose and nozzles; - 6 pairs of special protective goggles for laser operation; - Interchangeable lenses for the working head; - 3M mask/face shield; - Protective partitions/separators to enclose the workspace; - Manuals in Polish and English, technical documentation (DTR) in Polish, and site-specific instructions; - Domain, website, and e-mail address. The listed price is the sum of the net principal leasing instalments, excluding additional costs, and is for informational purposes only. Offer does not include any transfer fee.

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, - Laser slag cleaner for laser cutting machines - 1.1 kW motor - Video demonstrating working principle available Hedpex E Srcsfx Aa Eeg

Year of construction: 2006, condition: ready for operation (used), A manual parts cleaning machine D.W. Renzmann for the printing industry with exhaust air system is available. Useful dimensions X/Y/Z: 1800mm/600mm/300mm, washing pump capacity: 5m³/h, internal extraction: 2000m³/h and 1.1kW, dimensions X/Y/Z: approx. 2900mm/1200mm/1800mm. Documentation available. On-site inspection is possible. Hsdpfxetul Nvs Aa Ejg

Condition: new, New electric scrubber dryer, floor cleaning machine KREMER type KR-FL50A Year of manufacture 2024 Hsdpfx Asvvww Tea Eog Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush Ø 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume clean water: 50 liters Tank volume dirty water: 50 liters Noise level 66 dBa Climbing performance 2% Battery voltage 24 volts, 100 AH - Battery charger 24 volts - Battery 24 volts, 100 AH - One cleaning brush - Two separate tanks - No drive, the device is pushed by hand Machine length: 1200 mm Machine width: 510 mm Suction lip width: 850 mm Machine height: 1350 mm Empty weight 160 kg Good condition

Condition: new, Year of construction: 2025, OREE 3in1 from stock europe Hodpfek Radisx Aa Esg the Oree OR-HW is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A cleaning machine and a welding machine from 1,5 Kw together cust atlast 33 till 38.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1 - 1,5 - 2 and 3 Kw include wire feeder include in the price 1 till 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. we deliver in complete Europe and have in 3 locations in europe a sales and service organisation.

Year of construction: 2025, condition: new, functionality: fully functional, 3 & 4 Edge Sheet Metal Cleaning Machine Model: CBP-3 Hodpfx Aow S Slnsa Esg Single-person operation Stainless steel, mobile design Maximum sheet size: up to 600 x 800 mm Extendable collection tray underneath Dimensions: 2234 x 630 x 1372 mm (LxWxH) The versatility of this tray/sheet cleaner is also evident in its ability to process 4-edge trays with edge heights of up to 24 mm. Contaminants collect under the cleaner on a pull-out, easy-to-empty tray. The unit is fully mobile and can be effortlessly moved to any desired location after work. The entire construction is shot-blasted, ensuring the smoothest and most hygienic possible surfaces. Connection: 400V, 1 kW, 16A CEE plug Weight: 205 kg Brand new equipment With warranty + spare parts service Quality from a specialized workshop! Benefit from over 35 years of experience! Options: • Sheet cleaning up to 600 x 1000 mm • Greasing/oiling for sheets • Service package • Delivery service • Commissioning & instruction Visit us!

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,985 h, machine/vehicle number: L18_1463, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: diode laser, laser source manufacturer: CleanLaser, laser source model: CL 300, laser hours: 721 h, laser power: 300 W, laser wavelength: 1,064 nm, working length: 500 mm, working width: 900 mm, working height: 40 mm, compressed air connection: 6 bar, overall weight: 2,300 kg, total length: 4,500 mm, total width: 3,300 mm, total height: 2,215 mm, year of last overhaul: 2024, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, The system on offer is a laser cleaning cell manufactured by cleanLASER (model cleanCELL 2220), designed for industrial cleaning applications. In our case, it was used for cleaning stainless steel parts prior to adhesive bonding. The cell was in operation until the first quarter of 2024. The cell is equipped with a 300-watt diode-pumped ND:YAG laser, enabling precise and contactless surface cleaning. Components & Features: - Workstation: The cleanCELL 2220 features an X-Y-Z axis system for precise laser head positioning, two workstations, and six workpiece carriers. - Conveyor System: A BOSCH Rexroth conveyor system ensures the transportation of workpieces. - Peripheral Equipment: The unit includes a TEKA extraction system (LFE-301) for removing particles and a KLH cooling system for laser temperature regulation. - Safety: Full enclosure ensures the system meets Laser Safety Class 1 during operation. A spark detection system is also integrated. Documentation: Documentation can be provided upon request. Maintenance & Condition: The system was serviced annually, with the last maintenance performed on 05.01.2024. In the past, the resonator was replaced under warranty due to a loss in power output. Currently, the system has been relocated from its original position due to space constraints and is not connected to any power supply. Spare Parts: The system comes with a spare parts package containing various valves, timing belts, filter cartridges, desiccant, activated carbon filters, etc. Handover & Collection: Handover of the item takes place at the seller's business premises. After clarification of the technical details regarding disassembly, the item will be available for collection at that location. Disassembly and transportation are to be carried out by the buyer at the buyer's own expense and risk. The buyer is required to comply with the “Instructions and Regulations for External Companies” (information available upon request). Hjdpfxexxvvij Aa Ejg The seller will issue an invoice based on the signed purchase contract. Handover of the item will occur upon receipt of a payment confirmation.

Year of construction: 2025, condition: new, A post-lease refurbished unit for regeneration of DPF, FAP, GPF, SCR, EURO5, EURO6, DOC and catalytic converters. The device after a comprehensive overhaul: -new hoses and seals Hodoig H H Eopfx Aa Eog -regenerated turbine and water pump - latest software version -manufacturer's warranty ASK ABOUT AVAILABLE MODELS AND PRICE!!!

Year of construction: 2010, condition: ready for operation (used), Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible. Hodoxyk Trspfx Aa Eeg

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO type DAFL50A Year of manufacture 2024 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush Ø 510 mm Brush speed 175 rpm. Suction lip width 850 mm Hedpjxr N U Ejfx Aa Esg Tank volume clean water: 50 liters Tank volume dirty water: 50 liters Noise level 66 dBa Climbing performance 2% Battery voltage 24 volts, 100 AH - Battery charger 24 volts - Battery 24 volts, 100 AH - One cleaning brush - Two separate tanks - Without drive, the device is pushed by hand or the machine is pulled by the brush drive Machine length: 1200 mm Machine width: 510 mm Suction lip width: 850 mm Machine height: 1350 mm Empty weight 160 kg Very good condition, as good as new - unused - Original packaging

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner Hodpfx Aaox E Rd Dj Eeg After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: MAXI 91-2, Easy handling thanks to the fully automatic cleaning process. This allows specialists to concentrate on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing suds). The soiled items to be cleaned are placed in the rotating washing basket and the lid is closed. After setting the desired washing temperature and time, the appliance is switched on and the lye in the tank is heated. When the appliance is closed, the basket rotates around its own axis at a constant speed. The pump units draw the suds from the wash tank and convey them through 6 stainless steel nozzle pipes with overlapping flat jet nozzles. The items to be cleaned are intensively blasted with hot suds from all sides while the motor-driven basket rotates evenly. Once the cleaning process is complete, the appliance switches off automatically. Advantages 2 pumps arranged horizontally 6 three-dimensionally arranged stainless steel nozzle pipes Robust stainless steel design Additional small parts cleaning basket made of stainless steel (diameter 170 mm) Rotating stainless steel washing basket, V-belt drive via separate motor Steam extractor Stainless steel sieve plate with filter basket above the wash tank Low water cut-out Stands individually height-adjustable Technical data Dip tank / basket capacity 190 l Diameter of dip tank / basket 910 mm Load capacity 200 kg / optional 300 kg Hsdpfx Aoudz D Uja Eog Temperature min. - max. 0-60 °C Working height 500 mm Dimensions (W x D x H) 1310 x 1160 / 1350 x 1285 / 2000 mm Ei8Vwcub0 Weight 150 kg Heat output 6 kW Spray volume 2 x 6600 l/h Stainless steel material Electrical connection 8 kW/ 400 V/ 50 Hz Pump pressure 2.5 bar

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Armleder W 25 Year of manufacture: 1969 Hodpfxsnl Ekrs Aa Eeg Technical data: Drum dimensions: 330 x 350 mm Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time.

Condition: used, Year of construction: 2018, operating hours: 648 h, functionality: fully functional, machine/vehicle number: HR12952, fuel type: diesel, empty load weight: 922 kg, total length: 2,000 mm, construction height: 1,400 mm, drive type: Diesel, construction width: 1,260 mm, Sweeping suction machine Chassis number: HR12952 Hjdpfxjxnt Tkj Aa Ejg Condition: Ready for use and fully functional Technical condition: normal Description: Equipment: Front lighting, rubber bumper kit, sweeping roller PPL/wire, side brushes PPL/wire mix, power steering. Machine fully workshop-tested, cleaned, with new UVV inspection and maintenance completed.

Condition: used, Year of construction: 2017, operating hours: 89 h, functionality: fully functional, machine/vehicle number: U02424, fuel type: electric, construction height: 1,100 mm, drive type: Elektro, sweeping width: 900 mm, Vacuum sweeper Hjdewlwfhepfx Aa Ejg VIN: U02424 Technical condition: very good Battery voltage: 36V Battery Ah: 210Ah Battery type: Gel Battery year of manufacture: 2025 Battery condition: New Description: Tennant 6100 No.: R0570 Year of manufacture: 2017 Operating hours: 89 Easy to use 970 mm working width 560 mm main brush length 970 mm working width Maintenance-free battery 36 V / 210 Ah External charger 90 kg debris hopper Easy to empty Battery runtime up to 3.4 hours Weight including battery: 503 kg Up to 3,270 m² area performance per hour Multi-stage filter system The machine is in very good visual and technical condition. Fast and uncomplicated transport is possible upon request! The advertisement is for identification purposes only. A detailed description of the condition and possible equipment is available upon request! Errors and prior sale excepted. Sale to commercial customers only. All sales of used goods are made without warranty or guarantee. If you haven't found the forklift you're looking for, please contact us. We have a large selection of other equipment on site.

Condition: used, Cleaning washing defatting machine PERO type ROBOMAT 7A Useful length: 1600 mm Hodpfxoxr Eixo Aa Esg Useful width: 1040 mm Useful height: 960 mm Loading height: 800 mm Maxi load weight: 1500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Dry Ice Cleaning Machine Model X-FORCE – Polish Manufacturer! Hedpsxy Ilfjfx Aa Ejg This listing features a state-of-the-art X-FORCE dry ice cleaning machine, manufactured by the first Polish producer of such equipment. Our devices are sold worldwide and supported by an extensive service network. This is a professional, efficient, and reliable device designed for cleaning surfaces without the use of water or chemicals – the ideal solution for industry, workshops, maintenance, and restoration. Dry ice cleaning technology. Key advantages of the X-FORCE machine: • Polish manufacturing – quality assurance, robust construction, full service support, and spare parts availability. • High performance – effective cleaning with no surface damage. • Mobile and compact – easy to transport and operate. • Environmentally-friendly technology – dry ice cleaning without chemicals and no secondary waste. • Safe operation – 230V power supply, electric vibrator ensures stable ice feed. Technical Specification – X-FORCE: Parameter | Value Dimensions | 100 × 50 × 55 cm Weight | approx. 100 kg Dry ice hopper capacity | 37 kg Operating pressure | 1.7 – 20 bar Dry ice feed range | 0 – 3.5 kg/min Dry ice stream diameter | 1 1/4" Air consumption | 1.5 – 6.0 m³/min (5 bar) Power supply | 230V AC (50/60 Hz) Electric vibrator Applications: • Cleaning of injection molds and dies • Cleaning and maintenance of industrial machines and equipment • Restoration of metal, wood, and stone surfaces • Removal of paints, greases, oils, and industrial contaminants • Cleaning electrical and electronic devices (no risk of flooding) • Post-fire cleanup Why choose X-FORCE: When you purchase a machine from the original Polish manufacturer, you not only receive a high-quality device, but also: • 24-month manufacturer’s warranty • Technical support and operator training • Access to accessories and spare parts • Warranty and post-warranty service on all continents! We are the only dry ice cleaning machine manufacturer offering a 24-month warranty. Brand new machine, ready for operation. Customisation of machine parameters and colour schemes available for larger orders.

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp. Hjdpswrpxtefx Aa Esg

Year of construction: 2024, condition: new, Ease up your production with a Wattsan CW cleaning machine, continuous and with water-cooling. It can remove rust, paintwork, oil products, oxide coatings, welding scales, and carbon deposits from a variety of metals. This model features 1 type of cleaning seam. There are no consumables and no need for a significant amount of necessary space. Compact, portable laser cleaner that can work at any angle and in the most inaccessible places. The chiller is also built-in. The fiber length is 8 meters. The laser gun is lightweight and comfortable for long-term use. You can give our managers a call for additional details! Wattsan CW Cleaning machine characteristics: Cooling: water Laser power: 1000-3000 W Hedoiicgkspfx Aa Esg Machine size: 880*560*1010 mm Laser source: JPT / Raycus Weight: 145 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp. Hodpfonzh Absx Aa Ejg

Condition: new, Year of construction: 2024, Cleaning, welding, cutting, weld cleaning, and energy storage welding — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 2 mirrors, 8 seam types and multiple types of weld clean. You can give our managers a call for additional details! Wattsan 5in1 G2 Pro characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Hedpjrztrmjfx Aa Ejg YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging Hodpfxowhu Hhe Aa Ejg BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: excellent (used), Year of construction: 2005, CNC corner cleaner with modern drive using linear motors Corner centering from the outside of the window Hedpfx Aaowh R Tkj Eog Profile programming is based on a graphical interface after entering profile drawings in graphic format Tool movements with NC curves facilitate the creation and editing of programs possibility of installing up to 19 tools disc milling machine unit freely programmable operator panel with 17-inch TFT monitor and keyboard Windows operating system Positioning via linear motors profile height 45-130mm (optionally 180mm) profile width 50-130mm min. size of window opening outwards 320x320