Used Table Drill for sale (50,298)

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. Fpodpfxoxabm No Ad Nep - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Year of construction: 2022, condition: excellent (used), Work table, baker's table Stainless steel worktop with rear upstand Reinforced welded construction Lower storage shelf Stainless steel design Approx. dimensions: 1880 x 800 x 890 mm, W x D x H Used device, cleaned Fedpfx Aewv E Nvjd Njpp We have more tables in stock!

Condition: good (used), Year of construction: 1987, Starr Table Milling Machine SF 11/101 - Year of manufacture: 1987 - 7.5kW Fpsdpfxsxrg Hfs Ad Nsp - 380 Volt - Extendable table support - Aigner milling fence, motor brake - Aigner table extension with HolzHer 3-roller power feeder, 8 speeds - Weight: 700kg - Left/right rotation - 2 extraction ports 120mm Ø - 3 / 4.5 / 6 9000 rpm - 130mm spindle height adjustment - 1100 x 800mm !Available from April 2026!

Condition: good (used), Vibrating table paper stacker Polar RB 2 Art. No. L869 Fpsdpfx Ajvu Tl Djd Nep

Condition: good (used), Year of construction: 1992, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform -Load capacity: 500 kg -Platform: 2200 x 1000 mm -Dimensions retracted: 450 mm -Extended dimension: 600 mm -Attention stroke only: max. 150 mm -without control -Number: 7x lifting tables available Fpsdpjb A R I Defx Ad Njp -Price: per piece -Dependent weight: 700 kg/piece

Condition: reconditioned (used), Year of construction: 1980, Rapid radial drilling machine DONAU DR 23 Year of manufacture: 1980 Speed range: 70 rpm – 1550 rpm Arm reach: 920 mm Drilling capacity in steel: 30 mm Thread cutting device Mechanical feed Clamping table surface: 1050 mm x 400 mm Spindle taper: Morse taper 3 Fpedpoxuh Rkefx Ad Nop Machine lamp Coolant device Rotary table Ø 250 mm with index plates Machine vice 160 mm 5 height-adjustable machine shoes Various tools

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Fixed shaft Extended tables both left and right Aigner integral fence Maggi Steff 2034 Power feed unit Fodpfx Asw Rftied Nepp

Year of construction: 2025, condition: new, 3D Welding Table Steel With Nitriding D22 - 2000x1000x150 Weight: 630 kg without tools Fedpfx Ajxrp S Djd Nopp

Condition: excellent (used), 1.- Plate size Ø 400 mm 2.- Centre bore 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR Fedpfxshq Ukls Ad Nspp

Year of construction: 2023, condition: excellent (used), functionality: fully functional, This induction table was used for two years in a pancake restaurant and was stopped for private reasons. The machine is fully functional and we can also arrange transport. Fpodpfx Adew H N Svs Nop Length: 3600 mm Width: 900 mm Height: 900 mm

Condition: good (used), Year of construction: 2004, Ma.-No. 04126, pneumatic, speed 2,900 rpm, saw blade Ø 450-550 mm, working height 800 mm, electric power 5.5 kW +++ Attention: Machine is part of an online auction! +++ Fsdpfx Ajxt Nwpod Nepp

Year of construction: 1997, condition: used, machine/vehicle number: 0201-200066, Used Peddinghaus DSC300 DRILL drilling system for CNC-controlled drilling of sectional steel with roller measuring device for length measurement and profile positioning. The Peddinghaus DSC 300 drilling system is a small CNC-controlled drilling system with 3 drilling axes and a roller measuring system for length measurement and material transport. Fpodpfx Ast Udb Ejd Nep

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Fpsdpfxsxdnrae Ad Nep Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: good (used), Year of construction: 1991, machine/vehicle number: 103912, Offer 25231 Technical Data: Fpedpfxsxvqpro Ad Nep - 2 bench drilling machines mounted on a machine table with T-slots - Drilling capacity: in steel 18 mm; in aluminium 20 mm - Drill spindle taper: MT 2 - Manual feed with hand wheel and fine adjustment - Drill chuck capacity: Ø 1 - 13 mm - Drilling depth: 100 mm - Spindle to column distance: 215 mm - Infinitely variable spindle speed: 100 - 1800 rpm - Drive: 400 V / 0.65 / 1.20 kW - Table surface: 780 x 460 mm - Distance spindle/table: approx. 470 mm - Required space: approx. W 780 x H 1350 x D 950 mm - Weight: approx. 500 kg

Condition: excellent (used), 1.- Faceplate size..... Ø350 mm 2.- Centre bore ..... Ø52H7 3.- Plate height (Vertical axis) ..... 300 mm 4.- Centre height (Horizontal axis)..... 300 mm 5.- Overall height ..... 450 mm 6.- "T" slot width ..... Central 12H7//Rest 12H10 7.- Clamping system in both axes ..... Hydraulic 8.- Load capacity (centred in plate): * Vertical axis (Horizontal plate)..... 200 Kg * Horizontal axis (Vertical plate)..... 200 Kg * With tailstock..... 300 Kg 9.- Rotating axis allowable torque (70- 90/1-R)..... 1.400 Nm 10.- Tilting axis allowable torque (70- 90/1-R)..... 1.400 Nm 11.- Resolution in both axes..... 0,001º 12.- Rotating axis transmission ratio ..... 180/1 13.- Tilting axis transmission ratio ..... 180/1 14.- Rotating axis indexing accuracy (Heidenhain ROD285C) ... ± 7 sec. 15.- Tilting axis indexing accuracy (Heidenhain ROD285C) ..... ± 7 sec. 16.- Rotating axis clamping pressure..... 50 BAR 17.- Tilting axis clamping pressure..... 80 BAR 18.- Rotating axis clamping torque..... 1.200 Nm 19.- Tilting axis clamping torque..... 2.800 Nm 20.- Rotating axis motor speed ..... 2.000 rpm Fpjdpfx Adjhq Un Ne Nep 21.- Tilting axis motor speed ..... 2.000 rpm 22.- Rotating axis speed..... 22,22 rpm 23.- Tilting axis speed ..... 22,22 rpm 24.- Rotating axis recommended motor torque..... 8 ¸ 12 Nm 25.- Tilting axis recommended motor torque..... 12 ¸ 18 Nm 26.- Rotating axis max. transmissible torque ..... 430 ¸ 645 Nm 27.- Tilting axis max. transmissible torque ..... 645 ¸ 970 Nm 28.- Weight (approx.- without motors)..... 600 Kg NOTE: PRICE INCLUDES ROTARY TABLE + 2 ENCODERS + 2 MOTORS

Condition: ready for operation (used), Voortman VB1250 lintzaag kap: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale boorunits 1 verticale booreenheid elke unit heeft een automatische gereedschapswisselaar met 5 posities spindel: SK40 (koeling via spindel) boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm draadtappen: M8/M24 profielhoogtemeting inbegrepen middelpuntmarkering inbegrepen nummermarkeringseenheid inbegrepen 18 meter invoerrollenbanen 6 dwarstransportbanden van 4 meter lengte maximale breedte: 1050 mm cap: 400 kg/m max positioneringsgewicht: 9 ton Roltransportmeetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4kW - 160 bar Fpedpfx Adowlkwwo Nep

Condition: used, Year of construction: 2010, total length: 3,400 mm, total width: 2,300 mm, total height: 2,000 mm, Weight: 1.250 kg Price: On request Touchscreen of the machine does not work. Settings can only be adjusted using a computer mouse.  Fpedpfx Aswnizaod Nep - Year: 2010 - Documentation available: No - CE marking present: Yes - Serial number: 604.09.062.10 - Main motor power [kW]: 5.5 - Roller table length [mm]: 3200 - Table width [mm]: 1150 - Dust extraction nozzle diameter [mm]: 100 - Controlled axes: Cutting height - Electrically adjustable axes: Tiltable, Scoring unit height - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 130 - Voltage [V]: 400 - Current consumption [A]: 14.5 - Power [kW]: 5.5 - Transport dimensions: 3400mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Scharmann - WB 80 / Heidenhain digital display Fpjdpfxowqz I Do Ad Njp -Travels X/Y/Z 1300x1200x1200mm -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 tons -Spindle mount MK5 -Automatic feeds 0.053-6.35mm -Rapid traverses -Spindle speeds 24-2880 rpm -Coolant system -Various accessories / tool holders etc. Subject to errors / input mistakes

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1517 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Fpsdpfx Aexaa Nvjd Njp Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Condition: used, load capacity: 100 kg, overall weight: 43 kg, With the Siegmund ST Box, your tools are always within easy reach. Create storage space and keep your welding table organized. The maximum load capacity of the ST Box is approx. 100 kg. Each individual drawer has a maximum load capacity of approx. 50 kg. The continuous housing protects the drawer contents from dirt and welding spatter. Delivered pre-assembled. - Powder-coated - Regardless of table size or ribbing, the ST Box can be fitted to any Siegmund welding table. Drawer extension: 500 mm Fedexfthiopfx Ad Nopp

Condition: used, Year of construction: 2001, functionality: fully functional, throat depth: 300 mm, spindle speed (max.): 2,100 rpm, spindle speed (min.): 75 rpm, drilling capacity: 32 mm, Morse taper: 4 Fsdpoxuu Ehefx Ad Nspp Drilling capacity: Ø32 mm. (st. 60 kg./mm2). Thread capacity: M28. Quill travel: 160 mm. Throat/reach: 300 mm. RPM.: 75-2100 Table size: 420 x 400 mm. Automatic feed: Yes Motor: 1,3 kW. Year: 2001 Country of origin: Spain. Size (L x W x H): 600 x 800 x 2250 mm. Weight: 365 kg. With automatic feed, automatic tapping unit, work ligth, integrated coolant system in base and drill chuck. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1990, the machine is in perfect condition and without problems Fpedpfxowmmy Ds Ad Njp

Condition: used, Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,300 kg, load capacity: 100 kg, arm reach: 2,800 mm, Equipment: documentation/manual, - Kuka industrial robot with a horizontal rotary table (fully integrated into the KUKA controller as the 7th axis) Fodpfx Adovvygko Nepp - has only 2500 operating hours, has only been used for occasional tests over the last 7 years.

Year of construction: 2022, condition: excellent (used), Bakery and pastry work table Stainless steel with granite worktop Reinforced welded construction Open at the bottom Stainless steel version Dimensions approx.: 2000 x 800 x 890 mm (W x D x H) Used equipment, cleaned Visit our large exhibition! Fpedpfxewv E Npe Ad Nop

Condition: used, Year of construction: 2016, Second hand COMBINED LINE for cutting half sheets of float glass and laminated glass MACOTEC, type Strato Active 3.7 + Master Shape 3.7FR, year 2016 Fjdpfx Adoxq Ezrs Nopp