Used Table Circular Saw for sale (21,186)

Condition: used, Altendorf C45 Panel Saw with Sliding Table Dksdpeyt Ibbjfx Aa Hjt Scoring unit 0.75 kW, electrically adjustable up/down Sliding table 320 cm Max cutting width at rip fence on the right side: 130 cm Tilting 0-45°, manually adjustable Saw blade height adjustable manually Motor power 4 kW Max saw blade diameter 315 mm Duplex angle fence included The machine has been inspected, still holds accuracy and angles, and is fully functional

Condition: used, Martin t60 panel saw carriage: 330 cm, tilt: 0-45 degrees, and motorized adjustment of the blade height, sliding table on the right side, manually adjustable up to 1250 mm with an electronic display, 3-axis scoring saw, electrically adjustable, scoring saw that extends and retracts pneumatically, main motor: 5.5 kW, 3 cutting speeds, Dkedpfxszzdi Nj Aa Het max. blade diameter: 400 mm.

Condition: good (used), For sale is a used SCM panel saw with a cutting length of 3000 mm. The machine has been inspected and refurbished by our service team and is in good condition. Dkjdsza Dqfspfx Aa Hjt Technical data: - Cutting length 3000 mm - Cutting width 600 mm - Cutting height 135 mm - Max. saw blade diameter 400 mm - Dust extraction connection 120 mm - Motor power 5.5 kW / 7.5 hp The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Saw, circular saw, panel saw Reference: R-A0074

Condition: good (used), Year of construction: 1977, machine/vehicle number: 6297, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 380 V, cutting height (max.): 100 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, Industrial table saw with 3000mm table. The blade cannot be tilted. It has been in everyday use, being sold becuse of machine change. It needs a little fine adjustments, but it works well. Pre-cutting motor was added to the machine. Dsdezi Emrspfx Aa Hskt

Condition: good (used), Year of construction: 1984, functionality: fully functional, Offered from a workshop for people with disabilities is a fully functional panel saw. Altendorf F45 Tiltable up to 45° via handwheel Year of manufacture 1984 With scoring saw (no saw blade included) Max. saw blade diameter 400 mm A 350 mm blade is installed Max. cutting height with a 350 mm blade = 98 mm at 90° – 75 mm at 45° With motor brake (approx. 2.5 seconds to stop) Dkjdozdqxvepfx Aa Hot Carriage length 2500 mm Cutting width to the right of the saw blade 850 mm Speeds 3/4/5/6000 rpm With cutting line laser Gresser HEnE 632.8 nm 380 Volts Weight 990 kg Emergency stop button + used and new saw blades as shown in the picture

Condition: used, Year of construction: 1982, total length: 2,700 mm, total width: 2,220 mm, total height: 1,500 mm, Colour: Green Weight: 900 kg - Year: 1982 - Documentation available: No - CE certificate present: No - Serial number: V024400 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 100 - Parallel stop displacement [mm]: 1500 - Roller table length [mm]: 2500 - Table width [mm]: 1940 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 140 - Controlled axes: Tiltable, Cutting height, Scoring unit height - Manually adjustable axes: Scoring unit height, Tiltable, Rip fence, Cutting height - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - Spindle speed: Manual - └ Min. spindle speed [rpm]: 4000 - └ Max. spindle speed [rpm]: 5500 - └ Spindle speed control: Not applicable - Schuinstelbare zaagaggregaat: - └ Max. adjustable [°]: 45 - Voltage [V]: 380 - Current consumption [A]: 11 - Fuse [A]: 16 - Power [kW]: 7.5 - Transport dimensions: 2700mm x 2220mm x 1500mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dodpjwnh S Dsfx Aa Hokt Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), functionality: fully functional, 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Vertical and horizontal pneumatic clamps Cutting process started by two buttons Safety switch Dsdpfxoy N Rg Ts Aa Hskt Width: 900 mm, Height: 1500 mm Year: 2003

Condition: used, Altendorf Wa80 panel saw, 320cm sliding table on round rods, Main motor 5.5KW, 3 rotation speeds, Scoring unit 0.75KW, 0-45° tilt, electrically adjustable, Dedpfx Asyhdb Hoa Hekt Saw blade up/down electrically adjustable, Max blade diameter 400mm, Max cutting width at right rip fence 130cm, Machine tested, fully functional.

Condition: excellent (used), Year of construction: 2010, Technical Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,080 mm Dksdpfxeud Sk Sj Aa Hst Extraction port: 2 x 100 mm Width: 1,700 mm Height: 3,000 mm Length: 6,570 mm Motor power: 7.5 HP (5.5 kW) Motor voltage: 3 x 400 V Saw blade diameter: 300 mm Cutting length: 5,300 mm Cutting depth: 80 mm Digital display for horizontal and vertical cuts Year of manufacture: 2010 Net price: 11,190

Condition: good (used), Fully automatic with miter cut, Max. Diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, Automatic feed single 600 mm, max. feed length multiple 1800 mm, Minimum offcut length for single cut 20 mm, minimum offcut length for automatic operation 110 mm, Table rotation range for mitre cut 135 degrees, Total drive power 3.2 kW, Weight without roller conveyors 1100 kg, coolant system, the saw is still under power, Functional video available, Operating instructions with circuit diagrams and spare parts lists. Djdpfxjtqdvgj Aa Hekt

Condition: new, Year of construction: 2026, JMY-870 Circular Saw Blade Sharpener is a precise and reliable machine designed for sharpening carbide-tipped (TCT) saw blades with diameters ranging from 80 to 700 mm. Developed for professional users, it ensures high sharpening quality and stable operation thanks to its robust cast iron construction. The machine comes equipped with a diamond grinding wheel, providing long service life and excellent machining accuracy. Main advantages of the JMY-870 saw blade sharpener 125 mm diamond grinding wheel – ideal for sharpening carbide-tipped (TCT) saw blades. Sharpening angle adjustment from -35° to +45° – allows precise adjustment of the blade position according to the saw blade type. Bevel angle adjustment from -30° to +85° – provides full flexibility when selecting tooth geometry. Stable cast iron base – minimizes vibrations and ensures safe operation. Set of reducing bushings included – enables compatibility with different blade bore diameters. Free tool set included – the machine is supplied with the necessary keys required for operation. Quiet operation – rubber vibration-damping pads improve user comfort. Design and technology The JMY-870 sharpener is equipped with a precise blade mounting system and an adjustable support table, allowing accurate positioning of the blade in both planes. The powerful 0.25 kW motor with a speed of 2850 rpm provides optimal grinding performance and high sharpening quality. Precision and work efficiency High-quality workmanship and a stable construction ensure uniform sharpening of every saw tooth. Thanks to a wide range of angle adjustments and precise blade guidance, the sharpener guarantees accurate results even when working with very hard materials. Applications The JMY-870 saw blade sharpener is ideal for: woodworking workshops, production plants, tool regeneration and sharpening service centers. It is perfectly suited for sharpening circular saw blades with various tooth geometries and, thanks to its precise operation, can also be used in professional industrial tool sharpening applications. Standard equipment 125 mm diamond grinding wheel Set of reducing bushings for different saw blade bore diameters Cast iron base with rubber vibration-damping pads Dedpfx Aju Tti Ioa Hokt Technical specifications Minimum / maximum saw blade diameter 80 mm – 700 mm Horizontal blade holder adjustment -35° to +45° Grinding assembly tilt angle -20° to +20° Grinding wheel speed 2850 rpm Grinding wheel dimensions 125 × 10 × 13 mm Motor power 0.25 kW Power supply 230 V Net weight 21 kg Machine dimensions 750 × 750 × 350 mm

Condition: used, Longitudinal circular saw Longitudinal panel saw Dsdpsq E Ivtsfx Aa Hjkt Cross-cut / longitudinal circular saw, year 1999 operates from below for lengths up to 4.7 m material thickness up to 110 mm also suitable as a travelling saw behind a production line INFO!! For such a new Flender circular saw flat motor 10 kW, you pay 4,700 EUR which is more than you pay for the entire machine at company jöma.

Condition: used, Year of construction: 1981, Altendorf F 45 panel saw, Year of manufacture: 1981 Machine number: 81-5-37 Motor: 5.5 kW / 400 volts Scoring unit: 0.75 kW Cutting length: 2800 mm Cutting width: 1000 mm Raising/lowering and tilting up to 45° via handwheel Dkodpfezm S S Nex Aa Hst Spindle speeds: 3, 4, 5 and 6,000 rpm Max. saw blade diameter: 400 mm Max. cutting height: 130 mm Parallel fence Miter gauge

Condition: used, Year of construction: 1994, with Supergehrfixangle mitre fenceused, good conditionmake Panhanstype 690year of construction 1994machineNo. 1286GS wood dust testedmotor 5.5 kWsteel guidescarriage length approx. 3200 mmcutting width approx. 1250 mmswivel up to 45°scoring unitparallelogram protectiontable top extensionhydraulic height adjustmenthydraulic swivel adjustmentdigital display:- cutting angleangle stop as mitre fence with length compensation / super mitre fixsuction connection D 120/80 mmspace requirement approx. 3200 mm x 3700 mm x 1700 mmWeight approx. 1000 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loadingHandover as is, as inspectedwithout guarantee and warranty Dksdpovxr Npsfx Aa Het

Condition: new, Catalogue number H0548 Dksdpfx Aajzw Dnqj Het - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), SCM SI 400 EP panel saw Sliding table 320 cm, Motorized tilting 0–45 degrees Djdey Rzphjpfx Aa Hokt Motorized up/down blade adjustment, Right-side rip fence motorized adjustable up to 1500 mm, Manual scoring unit adjustment, 9 kW motor, 3 blade speeds, Max blade diameter 400 mm, Sliding table fence adjustable for angle Used machine, in very good condition.

Condition: excellent (used), Altendorf sliding table saw with hand guard Dsdpfezuw Apox Aa Hekt Table length: 320 cm Hand guard system for hand protection 2-axis scoring saw 5.5 kW variator main motor Maximum saw blade diameter: 500 mm CNC parallel fence, cutting width 1300 mm LED lighting DIGIT-L display Machine from 2022, in very good condition If you are interested, please contact us.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6858, Jumberca MIL model double-sided circular knitting machine, machine number 6858, year 2000. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). CE marked. NAMEPLATE DATA: · Diameter: 33 inches · Gauge: GG 18 · Number of needles: 1860 + 1860 · Maximum speed: 20 rpm · Power: 8.4 kW · Voltage: 380 V · Frequency: 50-60 Hz · Maximum air pressure: 6 bar · Weight: 2,890 kg · CE marking APPLICATION: Large-diameter double-sided knitted fabric: interlock, rib, fabrics for mattresses and home textiles. INSTALLED EQUIPMENT: · Control cabinet with start/stop buttons · Electronic lubricator Memminger-IRO Pulsonic 5.2, with oil · Upper fillet POWER SUPPLY: 50-60 Hz. The nameplate indicates 50-60 Hz, so the machine is suitable for both European networks and 60 Hz networks without frequency conversion. Dodjzvhzxjpfx Aa Hjkt CONDITION: Complete and assembled machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Weight according to nameplate: 2,890 kg · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain.

Condition: good (used), Year of construction: 1996, Woodworking machine, circular saw VEMA TKS LBM, year of manufacture 1996, with milling and drilling attachment. Data for milling and drilling attachment: Speed: 3,000 rpm, table size: 570 x 300 mm, drilling depth: 150 mm, drilling length: 210 mm, height adjustment: 170 mm, two-jaw chuck: up to 20 mm. Data for saw: Speed 3000-6000 rpm, blade up to 450 mm, cutting height up to 155 mm, bevel cut 0°-45°, table dimensions 1260x1100mm, width can be extended with a fence, length 2200mm, extra table 750x950mm. Dkjdohvaphepfx Aa Hst

Condition: used, Altendorf F45 panel saw, Main motor: 5.5 kW, Scoring saw motor: 0.75 kW, Carriage length: 300 cm, Tilt: 0-45 degrees, motor-driven adjustment, Dkedpezg Uw Isfx Aa Hst Blade height adjustment: motor-driven, Max. blade diameter: 350 mm, Cutting width on the right side: 1040 mm.

Condition: as good as new (ex-display), Roller table for EG800 multi-blade saw Length: 1.6 m Height to the top of the roller: 900 mm Dkedozn Iyfepfx Aa Hot Width: 738 mm

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Dksdow Nacvjpfx Aa Hot Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: new, saw blade diameter 315 mm capacity 90 degrees: round 108 mm capacity 90 degrees: square 93 mm 150 x 90 mm Working height 920 mm saw blade turning speeds 17+33 oder 33+66 U/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,328 t dimensions of the machine ca. 0,8x0,9x1,7 m ACTION PRICE!!! High-performance vertical circular saw VKS 315 (Article 20150) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) Dkjdpfxed Iin Sj Aa Het • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force ATTENTION: Price is without saw blade!!! (saw blade price EUR 109)

Condition: used, Year of construction: 2011, Slider length: 3000 mm Cutting width with fence: 1000 mm Cutting width with rip fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fence adjustment: electric / position control Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Fence display: digital display Rip guide display: scale Rip guide with miter function: yes Saw blade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg Dkedpfezdza Dsx Aa Hot

Condition: new, Catalog number: RE066 TECHNICAL DATA - Main blade diameter: ⌀250 – 350/30 mm - Scoring blade diameter (operates only with the main blade ⌀300, 350 mm): ⌀120/20 mm - Main motor power: 4 kW - Scoring motor power: 0.75 kW - Rotational speed: 4000 rpm - Scoring blade rotational speed: 8800 rpm - Blade tilt: 0 – 45° - Max. cutting length: 3200 mm - Moving table stroke: 3400 mm - Cutting width with parallel guide: 1250 mm - Splitting knife: ⌀350 mm - Parallel fence adjustable to angles of 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Upper dust extraction port diameter: ⌀80 mm - Lower dust extraction port diameter: ⌀100 mm - Weight: 650 kg ADVANTAGES – New machine – CE certificate – Warranty The 3200mm version is equipped with a hood and a 45° side guard. The saw does not include blades. Net price calculated according to the euro exchange rate. Djdpfxeztncqs Aa Hskt (In case of significant exchange rate fluctuations, the price may change.) Net price: 26000 PLN Net price: 6190 EUR, depending on the exchange rate of 4.20 EUR (Prices may change with higher fluctuations.)