Used Swivel Radius for sale (5,426)

Condition: used, mileage: 258,736 km, power: 103 kW (140.04 HP), first registration: 05/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,256 mm, loading space width: 1,758 mm, loading space height: 1,986 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Safety and Assistance Systems* Airbag for the driver * ESP with electronic differential lock, ASR, and ABS * Emergency braking assistant * Hill start assist * Electronic immobilizer * Seatbelt warning system, E-contact in the seatbelt buckle * Crosswind assist * Three-point automatic seatbelt with height adjustment for the driver * No side airbags, no parking assist, no rearview camera ----Comfort and Interior* Rubber flooring in the driver's cab * Preparation for universal flooring * Double passenger seat on the right, with storage compartment and foldable center backrest * Sun visors, foldable and swiveling * Heating in the driver's cab, electronically controlled * LED interior lighting concept in the passenger/cargo area * Glove compartment * Multifunction display * Instrument cluster, display in km/h * Enhanced interior noise damping ----Exterior and Function* High roof, painted in vehicle color * Rear swing doors with window openings and a 270-degree opening angle * Sliding door on the right * Exterior mirrors on the left and right, convex, with LED turn signal and wide-angle area * Radiator grille, black with chrome strip * Front bumper in gray with painted trim strip in vehicle color * Laminated windshield with heat-reflecting glazing * All-season tires on 4 steel wheels, 16 inches * Spare wheel (steel) with on-board tools and jack * Rear step, over half the width ----Technology and Drive* 4-cylinder diesel engine 2.0L, 103 kW Podpfx Ake Aa Hrzsierc * 6-speed manual transmission * Front-wheel drive * Start-stop system with brake energy recuperation * Battery 520 A (92 Ah), AGM battery * Alternator 180 A * Fuel tank 75 l ----Cargo Area and Transport* Tie-down rails (airline) in the cargo area: side walls * Side paneling in the cargo area made of plywood, up to the roof frame * Universal floor with tie-down eyes and tie-down rails in the longitudinal direction * Entry handle on the partition in the cargo area * Partition, with fixed window ----Other Features and Packages* Media Van Package * Rear window package * MAN Radio Van, 2 speakers * Mobile phone interface * Central locking with remote control and interior operation ---- * Tire dimension: 205/75R16 * Fuel tank: 75 liters * Technically permissible total weight: 3500 kg ----Vehicle Number: 12558----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, brokerage of financing, application for export license plates, vehicle delivery, vehicle registration, recovery and vehicle transport.----YOUR VTS TEAM

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,205 kg, color: white, gearing type: automatic, number of seats: 8, total length: 5,050 mm, total width: 2,275 mm, total height: 2,002 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: CHO26.TB19246 Errors and prior sale excepted! ----LOCATION: 04425 Taucha, Gerichtsweg 4 Phone number for inquiries: Mr. Ralph Bergel or bergel(at) ----SPECIAL EQUIPMENT * Trailer hitch, electrically swiveling * Battery: H8 AGM dual battery * Exclusive package: Panoramic sunroof - Rear seat package 21 (6 rear seats, sliding doors, left and right, 2nd row with 3 individual seats, outer seats heated, middle seat with folding table on the backrest, 3rd row with individual seats) - B&O speakers - Ambient lighting * Ford audio system with 13-inch multifunction display and Ford SYNC 4 including navigation * Fuel tank 70 l * Heated steering wheel * Matrix LED headlights, adaptive - LED low beam including all-weather light - LED high beam, glare-free - LED daytime running lights including integrated LED turn signals at the front - LED cornering light, static - Speed-dependent headlight range adjustment - LED taillights * Sliding door, electric, left and right - with hands-free function and including sun protection roller blinds in the 2nd row - Ford Key Free system including Ford Power-Start function * Auxiliary heater (fuel-water heater) with remote control * Technology Package 6: Exterior mirrors, electrically adjustable, heated and foldable - Blind Spot Assist including CTA with trailer detection - Rear cross-traffic alert - Pre-Collision Assist, camera and radar based - Driver fatigue warning - Lane Keeping Assist, lane departure warning, lane change assist, lane centering - Traffic sign recognition - Wrong-way driver warning function - Parking pilot system front/rear - Adaptive cruise control with Stop&Go function - Intelligent speed limiter with speed limit display - Surround view camera - Steering wheel, Sensico leather-look FURTHER EQUIPMENT * 3 USB ports for the 2nd row * ABS * Airbag, passenger side - with airbag deactivation function * Airbag, driver side * Airbag: Side airbags - left and right * All-wheel drive * Overhead console * Roof rails, silver * Theft alarm THATCHAM - with interior monitoring in the driver's cabin and cargo area including central locking with additional double locking * Diesel particulate filter (DPF) with SCR catalytic converter and AdBlue tank * Vehicle modem - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Power windows front, electric - with quick-up/down function * Heated windshield Prjdpj Af Dq Eefx Akisc * Automatic climate control, 3-zone - with automatic temperature control for driver and passenger side as well as rear, separately adjustable - Auxiliary heater, electric - Electric temperature control in the rear * Charging station, inductive in the center console, for mobile devices - according to Qi standard * Center console, large * Driver fatigue warning * Emergency call assistant eCall * Picnic light * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 17 in Active Design * Windshield wipers with rain sensor * Sliding door, with power assist * Rail-based flexible seating system * Seat package 29: Passenger single seat, 4-way manually adjustable - Driver seat, 5-way electrically adjustable - Seat heating for driver and passenger - Armrests, inside and outside - Lumbar support for driver, electric - Lumbar support for passenger - Side airbags, left and right - Head-shoulder airbags, front left and right - Partial artificial leather upholstery Active, seat center in fabric, upholstery in artificial leather-velour Black Onyx * Start-stop system * Socket

Condition: good (used), fuel type: electric, General information Podpfxezx Dwhe Akierc Year of manufacture: 2007 Weights Empty weight: 5.230 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.252 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 678 m Max swing of platform in degrees: 355 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: Z34/22N Year of build: 2007 Condition: Used Data: Max. working height: 12,52 m Platform height: 10,52 m Max. reach: 6,78 m Platform lifting capacity: 227 kg Platform dimensions LxW: 1,42 x 0,76m Swivel range: 355° Gradeability: 35% Total dimensions LxWxH: 5,72 x 1,47 x 2,00 m Ground clearance: 0,14 m Drive type: Battery Empty weight: 5.230 kg Special features: Rotating work basket 180°, basket arm/vertical rotation angle 139°, white tires.

Condition: excellent (used), Year of construction: 2009, Technical Data Machining: 5 axes: 3+2 Travel distances X / Y / Z: 300 / (300 + 100) / 330 mm Spindle speed max.: 24,000 min-1 Control system: FANUC Series 31i-MODEL A5 Tool magazine: 21 positions Rapid traverse X / Y / Z: 54 m/min Table load, base machine: max. 200 kg, evenly distributed Tool length max.: 190 mm; Ø40 mm in the range of 120–190 mm Tool diameter at 150–12,000 min-1: 80 mm Tool diameter at 12,000–15,000 min-1: 60 mm Tool diameter at 15,000–20,000 min-1: 45 mm Tool diameter at 20,000–24,000 min-1: 40 mm Peiseler indexing head: AWUP, pneumatic clamping up to 6 bar Peiseler: Faceplate speed max.: 55 min-1 Peiseler: Tangential torque during circular milling max.: 250 Nm Peiseler: Transport load, faceplate vertical: 150 kg Peiseler: Tilting moment: 1200 Nm Peiseler: Tangential torque clamped (6 bar): 500 Nm Peiseler: Center bore: 50 H7 mm Peiseler: Faceplate runout: 0.01 mm Peiseler: Center bore runout: ±0.01 mm Peiseler: Positional accuracy from worm gear: ±15 arcseconds Connection, weight and dimensions Tool weight / total tool weight: 2 / 23 kg Machine weight: 2050 kg Electrical connection: 3 phases, 200/220 V, 50/60 Hz Connected power: 10 kVA Prsds Aba Ifspfx Akioc Equipment and scope of delivery Peiseler AWUP swivel/indexing head for 3+2-axis machining Elbaron electrostatic filter, documentation RONA 60 SV Renishaw OMP40-2 measuring probe Blum measuring probe in the work area Extinguishing system according to the photos Technical specifications are subject to change without notice. Errors and prior sale reserved. The properties agreed upon in the purchase contract and the agreed scope of delivery shall apply.

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 29,000 mm, loading space width: 2,540 mm, loading space height: 2,850 mm, total length: 29,000 mm, total width: 2,540 mm, total height: 2,850 mm, suspension: air, tire size: 385/65-R22.5, Equipment: ABS, - BPW axles - EBS - Air suspension Pedo Aba Iropfx Akijrc - Disc brakes - Central lubrication system NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock Technical data MAX210-Z-3AA-13.60-22.5-2.54 Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Tare weight: 11,456 kg / Payload approx.: 36,544 kg / Coupling height (laden): 1150–1250 mm / Turning radius: 2300 mm Loading area length: 13,600 mm / 2-way extendable (2 x 770 mm) to 2900 mm / Wheelbase: 1810 mm Technical description: Extendable loading area with pneumatic locking / A fixed intermediate table of ± 250 mm is located in the central box structure. / 8 pairs of lashing eyes that fold outwards (LC 5,000 daN) / 3 pairs of lashing eyes that fold outwards (LC 10,000 daN) / Recesses in the outer frame for attaching lashing straps (LC 2,000 daN) Tires: Tires 385/65 R22.5 (Brand: Goodyear) Tire pressure monitoring system (TPMS): TPMS according to ECE R 141 Axles: BPW axles with disc brakes, air-suspended with raising and lowering valve. All axles are hydromechanically steered. Technical axle load: 10,000 kg (ET 0) Braking system: WABCO braking system according to EU regulations with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure: Steel structure made of high-quality fine-grain steel. Steel grades: S355J2+N/S355MC (Yield strength 355 MPa) / S690QL/S700MC (Yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the galvanized connection strip at the front with 24N, 24S and 15-pin sockets. Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098 Warning signs: Below the gooseneck and at the rear, left and right, holder for warning signs with socket. Options: • Maneuverability at the front and rear via cable remote control with PDC light control for axle alignment. (without mounting on the tractor) • Electro-hydraulic unit (approx. 45 kg) • 2 wheel chocks with holder on the partition wall • Kingpin 2" • Galvanized steel partition, approx. 1600 mm high. EN12642-XL • White reflector tape according to EU regulations over the entire length and width. Red at the rear. • EU marking plates (red-yellow) at the rear of the vehicle. • Holder for a rotating beacon at the rear of the vehicle. • Loading floor made of 30 mm thick hardwood, reinforced with omega profiles (approx. 298 kg). • 10 pairs of stake holder, approx. 100 x 50 mm, in the outer frame of the loading floor. • 1 spare wheel holder under the loading floor on the right. • BEKAMAX (Pico) central lubrication system with 2 pumps. • 6 pairs of recesses in the loading floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container. • 5 pairs of stake profiles, mounted across in the loading floor, for stakes 100 x 50 mm • Galvanized storage compartment under the loading floor (2390 x 720 x 400 mm) • Rope hooks (8 mm), every approx. 500 mm below the edge profile of the gooseneck and the loading floor • Ladder, mounted on the left in the direction of travel • Stainless steel toolbox • LED lighting • 10 pairs of twist locks (100 x 50 mm, length 1000 mm) • 8 container General information Year of manufacture: 2026...

Condition: new, functionality: fully functional, machine/vehicle number: RR16HHE3L, Year of construction: 2026, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,715 mm, fuel type: electric, mast type: triplex, construction height: 2,185 mm, power: 1.2 kW (1.63 HP), battery capacity: 205 Ah, battery voltage: 24 V, fork length: 1,150 mm, fork width: 170 mm, fork thickness: 65 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,165 kg, total length: 1,975 mm, total width: 836 mm, SCHORR HIGH-LIFT TRUCK, ELECTRIC, PRO 1600KG LOAD CAPACITY, 5M LIFT HEIGHT, RR16HH500E3L, FULL FREE LIFT - 1,600 kg load capacity, designed for demanding warehouse operations - Triplex mast with full free lift: lift even with a compact 2,185mm overall height - Proportional lift and lowering control: precise positioning to the millimeter - 24 V / 205 Ah lithium battery, easy to recharge - Low-maintenance AC drive, multi-function display, up to 16% incline - Turning radius 1,506 mm, only 836 mm wide: maneuverable in narrow aisles A powerhouse for your warehouse Heavy pallets, high shelves, tight schedules: The RR16HHE3L, with a 1,600 kg load capacity, is designed for demanding warehouse operations and reaches a lift height of 5.0 meters. Receiving, block storage, racking: You can handle the tasks of your warehouse with a single device, instead of switching between several machines. Pedpfx Aszktyijkiorc The substance behind it: solid chassis, stable triplex mast, polyurethane tires for continuous operation, and an electromagnetic operating brake that keeps the equipment and load safely in position in any situation. This ensures that the RR16HHE3L remains what your warehouse needs, even in multi-shift operation: a reliable device. Full free lift: full height, even under low ceilings Low doorways, narrow aisles, high shelves: this is exactly what the full free lift is for. The forks lift first within the mast profile without the mast extending even a centimeter upwards. With an overall height of only 2,185 mm, the RR16HHE3L passes through doorways and intermediate floors where extending masts would have long since collided and stacks to full height as soon as there is space upwards. The same applies throughout the warehouse: 836 mm overall width, a turning radius of 1,506 mm, and a working aisle width of 2,356 mm (pallet 800x1200 lengthwise). You can maneuver safely where space is tight: between rows of shelving, in the block storage area, or on the ramp. Millimeter precision, all day long The proportional lift and lowering control executes every movement exactly as you specify on the ergonomic tiller: quick lifting, sensitive and millimeter-precise lowering in the upper shelf level. This prevents pallets from being bumped and goods from being damaged, even with operators who have little experience. The low-maintenance AC drive operates energy-efficiently and handles inclines of up to 16%, and the multi-function display shows battery level and speed at a glance. The 24 V / 205 Ah lithium battery can be easily recharged at any time without a memory effect; the 24 V charger is included. And behind it stands the manufacturer itself: spare parts warehouse, its own workshop, personal advice. Technical data - Manufacturer (abbreviation): SCHORR - Manufacturer's type designation: RR16HH500E3L - Load capacity: 1.6t - Model: 500E3L - Weight including batteries: 1165kg - Drive: Electric - Tires: Polyurethane - Overall length: 1975mm - Overall width: 836mm - Lift: 5000mm - Free lift: 1715mm - Lift mast height lowered: 2185mm - Lift mast height raised: 5445mm - Fork dimensions: 65mm x 170mm x 1150mm - Fork outside distance: 570mm - Working aisle width with pallet: 800x1200 lengthwise 2356mm - Turning radius: 1506mm - Travel speed with/without load: 5.0km/h / 5.5km/h - Lift speed with/without load: 0.13m/s / 0.16m/s - Lowering speed with/without load: 0.22m/s / 0.13m/s - Max. climbing capacity with/without load: 8% / 16%

Condition: good (used), Year of manufacture: 2012 Empty weight: 1.405 kg Carrying capacity: 215 kg GVW: 1.620 kg Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Pedpfx Akj Aa Rdbeisrc Manufacturer: Dino Lift Model: 150T Year of build: 2012 Condition: Used Data: Max. working height: 14,95 m Platform height: 12,95 m Max. reach: 9,80 m Platform lifting capacity: 215 kg Platform dimensions LxW: 1,30 x 0,70 m Swivel range: 360° / endless Total dimensions LxWxH: 6,47 x 1,81 x 2,11 m Wheel pressure (Support pressure): 13 kN Ground clearance: 0,24 m Support width both sides: 4,46 m Support length: 3,85 m Ground pressure: 100 kg Drive type: Electric / 230 V power supply Empty weight: 1.620 kg Special features: rotatable working basket, maneuvering drive, 4 supports. Socket in the basket.

Condition: good (used), lifting height: 30,500 mm, fuel type: diesel, General information Year of manufacture: 2014 Mileage: 73.006 km Weights Empty weight: 7.240 kg Pjdpfx Aezzvygskisrc Functional Lifting capacity: 320 kg Working height: 3.250 cm Dimensions of cargo space: 880 x 255 x 355 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 2088 m Max swing of platform in degrees: 500 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 330 Year of build: 2014 Condition: Used Data: Max. working height: 32,50 m Max. platform height: 30,50 m Max. reach: 20,88 m Platform dimensions LxW: 1,71 x 0,86 m Max. basket load: 320 kg Swivel range: 500° Ground pressure: 56 kN (front) / 42 kN (back) Ground clearance: 0,15 m Support width both sides: 5.30 m (front) / 5.20 m (back) Support length: 4,87 m Total dimensions LxWxH: 8,80 x 2,55 x 3,55 m Driving license category: C1/3 Empty weight: 7.240 kg Total permissible weight: 7.490 kg Special features: Rotatable work basket, basket arm, rotation angle, power connection in the basket, loading area with loading side panels, van body. WITHOUT roof protection. Information: TÜV und UVV new Location: 41468 Neuss immediately available

Condition: used, mileage: 483,061 km, power: 350 kW (475.87 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 15,380 kg, maximum load weight: 10,620 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,600 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: other, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,500 mm, loading space width: 2,450 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, * German vehicle * First owner * Condition, see photos * Complete documentation for crane + truck available * Palfinger PK 20.501 L TEC loading crane * Hook height 14.90 m * 5.90 m = 3,200 Kg * 8.40 m = 2,150 Kg * 10.90 m = 1,640 Kg * 5th + 6th control circuit * 440° swivel angle * Internally routed hoses * Work lights * Elevated platform control * Start - Stop + Increased RPM * HPSC stability system * 2 hydraulic outriggers Podpfx Aks Agci Uoiorc * Hydraulic Palfinger pallet fork available for an extra charge * Loading area 6.50 m x 2.45 m x 0.90 m * High headboard * Wooden loading floor with DIN lashing eyes * Trailer coupling * Trailer load 24,620 Kg * Technically possible 35,000 Kg * Total weight 44,000 Kg * Comfortable Stream Space cab * 1 comfortable bunk * Refrigerator * Air conditioning * Auxiliary heater * Air-suspended driver's comfort seat * Seat heating * Electric windows * Electrically adjustable and heated mirrors * Electric sunroof * Enhanced electric engine brake * Multifunction steering wheel * Cruise control * Active Brake Assist * Lane keeping assist system * Stability control assistant * Differential lock * Bluetooth phone preparation * Info display 12.7 cm with video function * Aluminum tank with 630 liters * Storage compartment * Work lights * Reversing warning * Wheelbase 4,500 + 1,350 mm * Gross vehicle weight 26,000 kg * Unladen weight 15,380 kg * Payload 10,620 Kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, Weiss Prodpfxjzh D Rms Akiec Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, Year of construction: 2026, 5 machines in stock, Behringer Eisele VMS 350 in standard configuration, new machines, including 1 saw blade and full warranty. Top prices!! Manufacturer: Behringer Eisele Type: VMS 350 Condition: NEW Maximum cross-section for machining, round at 90°: 120 mm Maximum cross-section for machining, rectangular at 90°: 170 x 100 mm Maximum cross-section for machining, round at 45°: 120 mm Maximum cross-section for machining, rectangular at 45°: 120 x 100 mm Psdj Adp Eropfx Akiorc Saw blade diameter: 350 mm Saw blade width: 3 mm Bore diameter: 40 mm Adjustable saw blade speed: 17 RPM / 34 RPM Machine upper part can be swiveled: 45-90-45-30° Total motor power: 1.4/1.9 kW Width: 900 mm Length x Width x Height: 1050 x 900 x 1900 mm

Condition: used, Year of construction: 2007, travel -x axis 800 mm travel -y axis 500 mm travel -z axis 610 mm control HEIDENHAIN - TNC 530 Pedpfs Aa A Rmex Akisrc table load 600 kg number of spindle speeds 14.000 U/min numbers of positions in the tool changer 46 tool taper HSK-A63 Milling Machine - Vertical | FEHLMANN - PICOMAX 95 equipped with 46-way tool changer and chip conveyor. Equipment / Scope of Delivery: - swivel rotary table (4th + 5th axis) - touch probe: HEXAGON - tool measurement system: Blum - oil mist separator: Donaldson - high-pressure coolant system with coolant pump: Fehlmann - burn Engineering FD 2500-F11 cooling unit - Knoll 300 K-1 scraper belt conveyor The machine is in a well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX95 | PICOMAX-95

Condition: ready for operation (used), Year of construction: 2015, operating hours: 3,343 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, total height: 3,282 mm, total width: 4,039 mm, table width: 914 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 11,250 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 40, tool weight: 5,400 g, product length (max.): 4,827 mm, number of axes: 3, This 3-axis Haas VF-8 vertical machining centre was manufactured in 2015. It features an impressive X-axis travel of 1626 mm, Y-axis travel of 1016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 1626 x 914 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the Haas VF-8 vertical machining centre we have for sale. Contact us for further details. • CNC control • Haas CNC control, Classic generation • 15-inch colour LCD • USB port • Program memory: 1 MB • Remote jog handle with colour display • Axis travels and feed rates • Spindle nose to table distance: 102–864 mm • Rapid traverse (X/Y/Z): 15.2 m/min • Maximum cutting feed rate: 12.7 m/min • Worktable • Table dimensions: 1626 × 914 mm • Max evenly distributed table load: 1814 kgSpindle • Spindle taper: 40 taper Pjde Adz Iljpfx Akisrc • Maximum spindle speed: 8,100 rpm • Spindle power: 15 kW • Two-speed gearbox • Spindle cooling system • Spindle taper air blast • Rigid tapping • Tool changer • Side-mounted tool changer: 40 positions • Coolant and chip removal • Through-spindle coolant: 20 bar, 22 L/min • ACF additional coolant filtration system: 25 µm • Programmable coolant nozzle position • Coolant system with pull-out coolant tank • Screw-type chip auger • Probing and machining options • WIPS-R wireless workpiece and tool probing system • Tool length and radius measurement • Workpiece measurement and setting cycles • PMDS probe interface, internal power supply and wiring • Spindle orientation, coordinate rotation and macros • VQC Visual Quick Code conversational programming • HSM High-Speed Machining with look-ahead for machining complex contours using three-axis interpolation • 4AXD fourth-axis preparation, including connections and wiring. Rotary table not included • APC-READY automatic pallet changer preparation, including eight additional functions, macro support and wiring. Pallet changer not specified as included Additional equipment • Ball screw thermal compensation • Fully enclosed machining area with sliding front doors and hinged side windows • Program memory lock • Compressed-air connection • EPFDM early power failure detection module • Automatic central lubrication • Machine lighting • CABCOOL CNC control cabinet cooling unit Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 1 l, color: yellow, operation weight: 3,000 kg, maximum load weight: 3,000 kg, lifting height: 4,010 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 01/2026, emission class: euro5, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: 1, Equipment: additional headlights, air conditioning, cabin, Excavators GT3000 The GT3000 excavator is a modern crawler machine designed for earthmoving operations that require an extensive working range, high breakout force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation work, installation jobs, municipal projects, and tasks in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator is fitted with a bucket offering a capacity of 0.09 m³ and a width of 460 mm. The bucket breakout force of 17.6 kN enables efficient digging, even in tougher soil conditions. A maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a large operational area, reducing the need for frequent repositioning. A maximum digging height of 4510 mm and a dumping height of 2760 mm allow easy loading of material onto transport vehicles. Dimensions and Stability The overall dimensions of the machine are 4010 mm in length, 1540 mm in width, and 2360 mm in height up to the top of the cab (1380 mm to the top of the boom). The track contact length with the ground of 1530 mm and a track gauge of 1510 mm ensure stability during operation. The 250 mm wide track shoes and low ground pressure of 26.7 kPa allow safe operation on less compacted surfaces. Mobility and Maneuverability A rear swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and a counterweight clearance of 485 mm, as well as a minimum ground clearance of 255 mm, enable smooth movement over uneven terrain. The sturdy undercarriage with a track length of 1895 mm guarantees good traction and safe operation. Technical specifications Operating weight: 3000 kg Engine: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.6 kW Bucket capacity: 0.09 m³ Bucket width: 460 mm Bucket breakout force: 17.6 kN Swing arm: Present Joystick: Present Swing speed: 13 rpm Max. digging height: 4510 mm Max. dumping height: 2760 mm Max. digging depth: 2810 mm Max. reach: 4375 mm Rear swing radius: 710 mm Track contact length with ground: 1530 mm Total track length: 1895 mm Track gauge: 1510 mm Track shoe width: 250 mm Swing frame width: 1350 mm Ground pressure: 26.7 kPa Total length: 4010 mm Total width: 1540 mm Total height (to top of boom): 1380 mm Total height (to top of cab): 2360 mm Counterweight clearance: 485 mm Minimum ground clearance: 255 mm Prodpfxoymtfxo Akiec

Condition: good (used), lifting height: 30,500 mm, fuel type: diesel, General information Year of manufacture: 2015 Weights Empty weight: 7.240 kg Functional Lifting capacity: 320 kg Working height: 3.250 cm Dimensions of cargo space: 880 x 255 x 355 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 2090 m Max swing of platform in degrees: 180 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 330.1 Year of build: 2015 Condition: Used Data: Max. working height: 32,50 m Max. platform height: 30,50 m Max. reach: 20,88 m Total dimensions LxWxH: 8,80 x 2,55 x 3,55 m Platform dimensions LxW: 1,71 x 0,86 m Psdpfx Akjzzxypjisrc Max. basket load: 320 kg Swivel range: 180° Ground pressure: 56 kN Ground clearance: 0,15 m Support width vertical: 2,53 m Support width one side: 3,86 m Support width both sides: 5,30 m Support length: 4,87 m Empty weight: 7.240 kg Driving license category: C1 / 3 Special features: Rotating work basket, jib arm, rotation angle, WITHOUT overhead guard, advantage: power and water connections in the basket, cargo bed with drop sides, box body, exceptional lateral outreach, automatic setup and stowing, greatest outreach on a 7.5t chassis. Information: TÜV and UVV inspections new

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 18378, operating hours of spindle: 30,620 h, For sale is a highly precise and dynamic 5-axis CNC universal machining center from the reputable manufacturer DECKEL MAHO, model DMU 80 P hi-dyn, manufactured in the year 2000. This machine comes from the proven "hi-dyn" series (High Dynamics), which is characterized by extremely fast rapid traverse speeds, high acceleration values, and a robust portal design. It is ideally suited for highly precise 5-sided and 5-axis simultaneous machining in demanding tool, mold, and prototype construction. The machine is in operational condition and impresses with the combination of large travel ranges, an NC swivel rotary table, and stable machine kinematics. Equipment: - Rotary table - mounted special clamping device - 2 precision vises - viewing window - Heidenhain TNC426 control unit - 60-position tool changer SK40 Prodpfe Afphiox Akioc - chip conveyor - separate coolant system with band filter Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: excellent (used), Year of construction: 1997, pressure 220 t chamfer lenght 4175 mm distance between columns 3760 mm column arm 410 mm dayligth 450 mm stroke 180 mm ajustment speed 100 mm/sec working feed 8.0 mm/sec return speed 75.0 mm/sec table width 180 mm table height 960 mm oil volume 190 l 0 295 bar Psdpfx Ae Afzu Ujkierc controlled axis 5 Anzahl Number of working hours ca. 9.400 h total power requirement 15.0 KW weight of the machine ca. 16000 kg. range L-W-H 4810 x 2200 x 2990 mm Very good / well-maintained condition (!!) Only approx. 9.400 operating hours - Verified condition - Machine video - ?v=nDcOAjUtNi0 Equipment: - CNC electro-hydraulic press brake - Equipped with AMADA "OPERATEUR" CNC control - 5 controlled axes (Y1+Y2/X1+X2/R) - Swiveling control panel (on the left) - CNC-controlled depth adjustment (Y-axis) - CNC-controlled backgauge adjustment (X-axis) - CNC-controlled vertical adjustment of the backgauge fingers (R-axis) * Pneumatic height adjustment for the backgauge fingers - 4x manually adjustable backgauge fingers - AMADA CNC bed crowning (compensation system) - AMADA upper tool clamping system with wedge-style crowning * Includes 1x set of segmented punch tools (30°) - AMADA 60-series lower tool holder * Includes 1x set of segmented die holders * Includes 1x set of segmented 2-V dies - Lateral safety guards (swiveling doors) - Rear safety guards (swiveling door + protective fencing) - CE-marked - 1x mobile two-hand control unit - 1x mobile foot pedal * Includes a handwheel for fine-tuning the ram penetration depth (Y1+Y2) - Machine documentation

Condition: new, pressure 320 t chamfer lenght 3100 mm distance between columns 2600 mm work stroke 310 mm dayligth 525 mm column arm 510 mm ram stroke speed 140 mm/sec work speed 8.0 mm/sec return speed 130 mm/sec table height 900 mm oil volume 290 ltr. voltage 400 Volt weight 16500 kg range L-W-H 4550 x 2450 x 3200 mm Pjdpfxo Afzvfe Akijrc ----- CNC "C" SERIES electro-hydraulic press brake featuring: * Increased daylight (open height) * Extended cylinder stroke * Increased throat depth * Long-type "full machine cover" ----- Equipment: - DELEM CNC control, model "DA-69T," with touchscreen/graphics * 2D and 3D graphical programming via touchscreen * Three-dimensional visualization, including a representation of the machine . during simulation and production * 24-inch high-resolution TFT color display * Compatibility with the Delem "Modusys" system for flexible expansion and . customization of control modules * USB port and interfaces for external peripheral devices * Support for custom, application-specific software . * Control system with multitasking environment * Interface for sensor-supported bending and automatic corrections * Profile-S3D offline programming software * Swiveling touchscreen control unit, positioned at the front left - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, plus CNC-controlled crowning - CNC-controlled, motorized backgauge * Travel range: X-axis 750 mm // R-axis 250 mm * Travel speed: X-axis 500-600 mm/s // R-axis 200 mm/s * Equipped with recirculating ball screws * CNC-controlled, motorized backgauge fingers (Z1 + Z2) - Sectionalized "gooseneck" (swan-neck) upper tool: ROLLERI 135.85.R08, "System A" * Includes quick-change clamping system * Includes integrated crowning system within the tool holder - Sectionalized 4-V universal die (60x60 mm) - Rear safety system: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (including FMSC) - 2x front support arms with a sliding system (HIWIN linear bearings) - 1x mobile dual-pedal foot control - CE marking / Declaration of Conformity - Operating manual, including electrical and hydraulic schematics * Image shows a machine of nearly identical design

Condition: good (used), functionality: fully functional, FOR SALE: HURON MU4 Milling Machine Features and Capabilities (HURON MU4): • Machining travels: X = 1,100 mm | Y = 700 mm | Z = 500 mm • Table dimensions: 1,430 x 460 mm (with T-slots) • Milling head: Genuine HURON universal head with double rotation swivel (vertical, horizontal, and all-angle milling) • Feeds: Automatic and rapid on all 3 axes • Power supply: 400 V / Three-phase • Weight: Approximately 3,800 kg Included Equipment: Podo Af Atfepfx Akiorc • Industrial clamping vice (installed on the table) • Electronic control panel for displaying dimensions • Complete coolant system and floor-mounted electrical cabinet Condition: • Used equipment in working condition, sold as is.

Condition: used, Hurco VMX 60 U 5 axes Vertical Machining Centre, new 2014. Used Hurco VMX60U 5-axis vertical machining centre, new in 2014. High-performance CNC machining centre with simultaneous 5-axis capability, ideal for complex precision engineering and aerospace components. Available now. Hurco VMX60U 5-Axis Vertical Machining Centre Available for sale is this Hurco VMX60U 5-axis vertical machining centre, originally manufactured in 2014. Designed for high-precision and complex component production, the VMX60U combines the flexibility of simultaneous 5-axis machining with Hurco's renowned conversational programming and CNC control technology. Hurco VMX60U 5-Axis CNC Vertical Machining Centre for sale, manufactured in 2014. This high-specification machining centre is equipped for complex multi-axis machining applications across aerospace, precision engineering and subcontract manufacturing sectors. Prsdpfxs Aay Ucj Akioc Ideal for subcontract engineering, aerospace, automotive, medical and precision manufacturing applications, the VMX60U enables efficient single-setup machining of intricate parts, reducing cycle times and improving accuracy. The machine's universal swivelling spindle and integrated rotary table provide excellent access to complex workpieces, whilst maintaining the rigidity and reliability expected from the Hurco VMX series. Key Features Hurco VMX60U Vertical Machining Centre 5-Axis Machining Capability New in 2014 Simultaneous multi-axis machining Suitable for complex and high-precision components Ideal for aerospace, automotive and subcontract engineering sectors Hurco control system Stock Number: 113500 Located in the United Kingdom This used Hurco VMX60U CNC machining centre is available immediately. Contact Bowland Trading for pricing, availability and further technical information.

Condition: excellent (used), Year of construction: 2004, operating hours: 22,146 h, functionality: fully functional, machine/vehicle number: 107.44.00.035, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 300 mm, workpiece width (max.): 140 mm, total height: 2,900 mm, total length: 3,500 mm, total width: 2,400 mm, table load: 500 kg, rotary table diameter: 600 mm, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 4,192 h, spindle motor power: 12,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Here is a CNC vertical 5-axis machining center from the manufacturer Mikron for sale. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Type: UCP 800 Duro Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical data: Travel distances X-Y-Z: 800x650x500 mm Max. rapid traverse rate: 30 m/min Max. feed force X- and Y-axis: 7000 N Max. feed force Z-axis: 9000 N Rotary table C-axis: 360° Rotational speed: 20 rpm at 30% duty cycle, 8 rpm at 100% duty cycle Swivel range A-axis: -30° to +120° Swivel speed: 15 rpm at 30% duty cycle Table area: 600x600 mm Max. table load: 500 kg Magazine capacity: 30 positions, fixed Tool holder: HSK-63 Max. tool length: 300 mm without taper Max. tool weight: 8 kg Tool diameter: 90 mm fully loaded / 140 mm partially loaded Spindle speed: 20,000 rpm Power: 16 kW at 44% duty cycle, 12 kW at 100% duty cycle New spindle installed in 2021. Since then, 4,192 spindle hours. Operating hours (program runtime): 22,146 h Podpfx Aks Afy Ileiorc Machine dimensions: 3500x2400x2900 mm Weight: 9,900 kg Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Renishaw measuring probe OMP60

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49149, operating hours of spindle: 39,072 h, number of slots in tool magazine: 280, Equipment: chip conveyor, For sale is an extremely robust and reliable horizontal 4-axis machining center, Heller MCH 250, manufactured in 2008. The machine is designed for high-precision heavy-duty machining and is in operational condition. Equipment: - Horizontal spindle - 2-position pallet changer Pjdpfx Aj Afxw Hokijrc - Rotary table - Additional 4-position rotating pallet changer (Keppeler, SN: M4.4914900) - Siemens 840D control - 280-position tool changer - Chip conveyor Knoll 330S-1/150 - Coolant/lubricant treatment system with band filter, Siemens Simatic control - Cooling unit BKW Accessories: - Workbench (4 drawers, 1 door) - Swivel chair - Shelf - PC, mouse, keyboard, monitors Attractive offer – flexible and worry-free We offer not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together, we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2022, machine/vehicle number: 220.01.034.22, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, total length: 4,650 mm, total width: 850 mm, total height: 1,500 mm, overall weight: 900 kg, Details Format4 tempora F600 60.06L Edge bander for interior construction Year of manufacture: April 2022 Serial number: 220.01.034.22 15” smartouch screen x-motion plus package Extended infeed fence Equipped with advantEdge gluing unit Chain feed: 10 m/min Jointing cutter: 2x 3 kW Infrared heating Guillotine shear for cutting from coil: 0.4 – 3.0 mm Buffing unit top/bottom End trimming unit: 2x 0.75 kW Multifunction unit top/bottom Corner rounding unit: 2-motor Radius scraper x-motion plus Prsdpfx Akj Afw Tgeijc Flat scraper Electrical Data Voltage: 400.0 Phases: 3 Frequency: 50 Amperage: 28.0 Power: 15.0 Minimum pressure: 7 bar Markings: CE, UKCA Made in Austria Dimensions and Weight Length: 465 cm Width: 85 cm Height: 150 cm (detailed dimensions in the photos) Weight: approx. 900 kg Other Condition: used The machine has already been disassembled and is ready for transport. The first photo is a stock photo.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Weiler Praktikant 160 B, lathe with guide and draw spindle, year of manufacture 2000, with 3-axis digital display K&C, NEW, CE marking!! Technical data: >> Year of manufacture 2000, machine no. 4651 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeroing, switching the counting direction >> Quick-change tool holder, collets from 2 to 28 mm, increasing in 1 mm steps >> 3-jaw chuck 160 mm Röhm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Electric chuck guard Pjdpfx Aj Afxq Sskisrc >> Bed stop, drill chuck >> Back wall >> Machine feet >> Coolant system >> Operating manual, parts list (PDF) About the machine: Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2000, in very good condition. The machine is fully functional and has CE marking. All slides run very smoothly and evenly. The Weiler comes from a training workshop. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that appear to be ground. Take the opportunity to inspect this machine on site and under power to convince yourself of its condition.

Condition: used, Year of manufacture: 2019 Operating hours: 1.830 Make of engine: Yanmar Please contact Kristoff Van Havere for more information Pjdpo Agfa Hsfx Akiorc - Swivel - New front tyres - Perfect condition !