Used Suprasetter 106 for sale (1,313)

Year of construction: 2010, condition: like new (used), Heidelberg Suprasetter 52A -Year of manufacture: 2010 -Laser head: GEN III -Bacher punching system -10,300 exposed plates -Prinect RIP software installed on PC Nwodjirmmdepfx Anmek -Developing unit -Stacker advand 28

Condition: good (used), Year of construction: 2006, machine/vehicle number: PL001240, Thermal CTP (Computer to Plate) Throughput option (plates/h in max. format) : 14 Plates / Hour Min. Plate Format : 370 x 323 mm Maks. Plate Format : 930 x 1140 mm Plate Thickness : 0,15 - 0,3 mm Nodefmmyzjpfx Anmjwk Technical data can vary according to job, consumables and possible other factors

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 Nwodpfx Ansxzr Hpomek • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Condition: used, mileage: 454,309 km, first registration: 11/2018, fuel type: diesel, Step 4600 - Full Pneumatic Tractor Unit - Automatic Transmission with Retarder - Fixed, Liftable Third Axle For further information Nedexmlhkepfx Anmjwk

Condition: used, Year of construction: 1994, Overview  Nsdpsv N Hcxefx Anmswk The Centrifugal Separator Type SB80-06-076 from the manufacturer GEA Westfalia was previously used at a brewery in Estonia. Due to a complete shutdown of the production plant, this unit is for sale. Till closing of the factory, the separator was used frequently. Tech Specs  - 4500 rpm - with self cleaning drum Accessories  - Spare Parts - Tools

Year of construction: 2008, condition: used, Die-cutter Bobst VisionCut 106 LE Year: 2008 With lateral register Description - Elevation Nsdpfx Ajulkbyjnmewk - Platform for elevated machine - Bernoulli braking device at stripping - Braking brush at delivery - Side joggers at delivery We offer this machine cleaned, repainted and reconditioned in our factory in the Netherlands. Of course, this machine will be delivered with a new platform as well, although it does not show in the pictures yet. Availability: approx. 4 months after order.

Condition: good (used), C.E. Njdjzn I Hfopfx Anmewk

Condition: used, Neue Farbwalzen / New Ink Form Roller Böttcher for KBA RA 106Neue Farbwalzen / New Ink Form Roller Hersteller / Manufacturer BöttcherBöttcher KBA RA 106 Roller 0905482 A 1701 Böttcher KBA RA 106 Roller 0905481 B 1603 Böttcher KBA RA 106 Roller 0905481 B 1601 Böttcher KBA RA 106 Roller 0905481 B 1605 Online-Video-Inspection by Skype-Video Nwsdpsranvrsfx Anmjk We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: like new (used), Year of construction: 1996, functionality: fully functional, Groninger DFVK 4000 - KVK 106 B High-performance filling and closing system for vials - unused, as good as new This powerful filling, stopper inserting and flanging machine has never been put into operation and is in as good as new condition. It is ideal for the precise filling and secure closing of vials with an output of up to 12,500 objects per hour, depending on the medium and dosage. Technical specifications Filling quantity: up to 100 ml Object size: max. Ø 52 mm / height 180 mm Stopper size: max. Ø 32 mm Cap size: max. Ø 36 mm Format sets for vials: 2R, 6R/8R, 10R, 25R, 50H, 100H Includes: stainless steel dosing pumps, rubber stoppers & aluminum cap formats (Ø 13 mm & 20 mm) Filling and closing process sequence Feeding & filling: Vials are separated on a rotary table (Ø 80 cm), transported and filled with piston pumps using below-level filling. Pre- and post-gassing possible. Stopper insert: 4-lane sorting machine with vibrating chutes ensures precise positioning and pressing in of the stoppers (pick-up process). Flanging: Flip-off caps are fed in and securely closed with 6-position flanging rollers (individually adjustable contact pressure). Output: Vials are processed directly or prepared for freeze-drying. Special features Robust stainless steel construction with safety cover User-friendly: Control via Siemens S5 control cabinet Including English machine and operating manual Technical data Manufacturer: Groninger, Crailsheim Year of construction: 1996 Machine no.: 4005 / 4008 Electrical supply: 220/380V, 3 phases, 50 Hz Nsdpfx Asvyic Asnmswk Dimensions: Machine 450 x 260 x 265 cm, control cabinet 120 x 60 x 215 cm Weight: approx. 1,400 kg This unused, high-quality filling and closing system is ideal for pharmaceutical, biotechnological or cosmetic companies that want to expand their production capacity. Attention: Vial washer and Steri Tunnel not available. Contact us for more information or a customized offer.

Condition: good (used), Year of construction: 1996, incl. Chip conveyor Nwsdpfx Answ Rc Dromek incl. Chip crusher Under power incl. spare rollers Power on hours  23.000 H Working hours ca 8.000 H Rail track gauge: 1435mm Max. wheel tread Ø: 1400mm Min. wheel tread Ø: 520mm Max. axle length wheel set:2450mm Min. axle length wheel set:1620mm Speeds / ranges: 154Rpm Number of slides: 2 Power: 44kW Length: 6000mm Width: 2200mm Height: 2600mm Weight: 33000kg

Condition: new, Year of construction: 2020, functionality: fully functional, cooling capacity: 106 kW (144.12 HP), type of input current: three-phase, type of cooling: water, overall weight: 840 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,900 mm, total height: 1,700 mm, warranty duration: 12 months, heating capacity: 122 kW (165.87 HP), Watercooled chiller/Heat pump Climaveneta FOCS W H 0501 106 kW/122 kW Cooling capacity: 106 kW / 30.14 tons (12/7 — 35°C) Heating capacity: 122 kW / 34.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Nedpfx Ajzwuv Esnmswk Compressors: 1 pcs. Bitzer CSH6583-50CVY-40P (screw) Type of refrigerant: R134a Dimensions: 2.9x1.2x1.7 m Weight: 840 kg Working hours: 48 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, load capacity: 180 kg, can be inspected on-site while powered. Nwjdpfxszvfh No Anmsk

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor, geared motor with brake -Manufacturer: Lenze, bevel gear motor -Transmission: Type G50BH121MVAR2C00 -Speed: 106.0 rpm / Torque: 65 Nm -Engine: Type M55AP080M045E00CTZ -Power: 0.75 kW / 50 Hz -Shaft: Ø 25 x 45 mm -Protection rating: IP55 -Number: 4x geared motors available -Price: per piece Nwjdpfxext Dnio Anmjk -Dimensions: 490/160/H230 mm -Weight: 20.5 kg/pc.

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering Nwodpfx Aoxl Talsnmek F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Nwedpfx Aoyaq S Aonmok Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Year of construction: 2007, condition: excellent (used), Heidelberg Suprasetter 52A - Year of manufacture: 2007 - 81,800 exposures - Laser head GEN II, 2400 dpi - Bridge - Stacker advand 26 Nsdpjirtdlsfx Anmowk - Prinect RIP software installed on PC

Condition: used, mileage: 573,000 km, first registration: 12/2019, fuel type: diesel, fuel: diesel, Year of construction: 2019, 2 x DAF XF106 450 SSC BDF swap body vehicles with hydraulic lifting frame VANTEC • VANTEC hydraulic lifting frame / multi-changer system • Emission standard: EURO 6 D • Intarder • Axle configuration: 6x2 • Lift / steering axle (3rd axle) • Automatic climate control • Stationary air conditioning • Auxiliary heating • Automatic transmission • Differential lock • Adaptive cruise control • Lane departure warning system • Emergency brake assist • Hill start assist • Multifunction steering wheel • Refrigerator • Airbag • Radio-CD player • 2 bunks • Gross vehicle weight: 26,000 kg • Unladen weight: 10,220 kg • Wheelbase: 4,600 mm • Parking height: 1,020 - 1,320 mm • Suitable for swap bodies of 7,150 and 7,450 mm Nwedpfx Answmplcomjk • Frame length (rear wall of cab to end of vehicle frame): 7,040 mm • Tyres: 315/60 R22.5 • Tread depth: 11/12 9/9/11/11 13/13 mm - very good! - German vehicles! - 1st owner! - General inspection / emissions test and safety test can be done new on request for an additional fee! Errors and prior sale excepted!

Year of construction: 2001, condition: used, fuel type: electric, Running gear, electric motor, DC motor, traction motor, drive motor for order picking truck, drive wheel for electric pallet truck Nwjdpsi Dud Djfx Anmek -Manufacturer: Jungheinrich, chassis drive motor from electric pallet truck ECE 20 -Drive motor: juli GF 106-G3 24V 2.0 kW -Wheel: Ø 218 mm -Individual components: see photos -Number: 1x chassis available -Price per piece -Dimensions: 295/277/H630 mm -Weight: 73 kg/pc.

Year of construction: 2005, condition: used, fuel type: electric, Running gear, electric motor, DC motor, traction motor, drive motor for order picking truck, drive wheel for electric pallet truck -Manufacturer: Jungheinrich, chassis drive motor from electric pallet truck ESE 320 G 20-240-54 -Drive motor: juli GF 106-G3 24V 2.0 kW -Individual components: see photos -Wheel: Ø 215 mm -Number: 1x chassis available Nwsdpfx Anji Aqa Romok -Price per piece -Dimensions: 287/275/H670 mm -Weight: 76 kg/pc.

Condition: good (used), Year of construction: 2002, Chassis, electric motor, DC motor, drive motor, traction motor for order picking forklift, drive wheel for electric pallet trucks Nodpfoi Aqamjx Anmjwk -Manufacturer: Jungheinrich, chassis drive motor from electric pallet truck ECC 10 G 115-90 E -Drive motor: juli GF 106-G3 24V 2.0 kW -Individual components: see photos -Wheel: Ø 215 mm -Quantity: 1x chassis available -Dimensions: 295/275/H650 mm -Weight: 54 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, Wrapper for round bales (125 cm) or square bales (80x90), with electric control. Nodpfjztnkhjx Anmswk

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,763 h, pressing force: 61 t, total width: 1,580 mm, total height: 2,545 mm, overall weight: 5,400 kg, product length (max.): 2,100 mm, number of axes: 7, This 7-axis Baykal APHS 21060 press brake was manufactured in 2021. It features a pressing force of 60 tons and a bending length of 2100 mm, providing robust performance for various applications. The machine includes a throat depth of 410 mm and a stroke of ram measuring 210 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 21060 press brake we have for sale. Contact us for further details. • Performance and capacity: • Distance between columns: 1600 mm • Throat depth: 410 mm • Daylight opening: 475 mm • Stroke of ram: 210 mm • Table width: 60 mm • X-axis travel: 1000 mm • Backgauge axis: Y1, Y2, X, R, Z1, Z2 + crawling • Hydraulics and drive: • Hydraulic pressure: 265 bar • Oil capacity: 140 liters • Main motor power: 10.3 kW • Installed power: 11 kW • Power supply: 400 V / 50 Hz / 3 Ph • Other: • Maximum stopping time: 80 ms Nwedpfx Aezdktmjnmek Additional equipment • Upper tool, 57 kg • Lower tool, 87 kg Technical Specification Bending Length 2100 mm

Condition: excellent (used), mileage: 499,758 km, power: 353 kW (479.95 HP), first registration: 11/2018, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fridge, parking heater, spoiler, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle 1: Lift axle; Steering; Suspension: air suspension Rear axle 2: Double wheels; Suspension: air suspension Weights Empty weight: 8.729 kg Carrying capacity: 17.271 kg GVW: 26.000 kg Nwsdpjzwvuiefx Anmok Maintenance, history and condition APK (MOT): tested until 11/2026 Technical condition: very good Visual appearance: very good Financial information Price: On request Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Aluminium fuel tank - Climate control - Heater - Radio/cassette player - Radio/Cd/Audio system - Radio/CD player - Roof spoiler - Sleeper cab - stand airco - Vehicle heater - Visor = Remarks = DAF XF 106.480 SSC / 6X2 / Steering Axle / Stand Airco

Year of construction: 1999, condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: up to approx. 950 mm, see photos -Load capacity: kg -Dimension: 1320/600/H1300 mm Nwjdpfelyvdgex Anmjk -Own weight: 88 kg

Condition: used, Used Westfalia model CSA1-06-475 stainless steel clarifier centrifuge. Self cleaning bowl in steam sterilizable design. Internal pressure rated 1.5 bar pressure at 127 deg.c. Capacity rated approximately 13 litre. Unit includes 1.5kw, 1415rpm drive. All mounted on skid. Includes tools Nodpfxezvyi Uj Anmowk