Used Straight Knives for sale (2,573)

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. Bdjdpfx Aaoz Ai U To Ieh We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. Bsdpfx Aasz Ai T No Iedh 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, Year of construction: 2024, Equipment: ABS, Total length without chute: 8801 mm Total length with chute: 8962 mm Internal length: 7410 mm Total width: 2550 mm Internal width: 2346 mm Internal height: 1515 mm Track gauge: 2040 mm Distance: Kingpin to 2nd axle: 4800 mm Rear overhang without chute: 1296 mm Rear overhang with chute: 1457 mm Ground height: 1464 mm Max. height with tipped body: 8272 mm Total weight: 36,000 kg Technical gross weight: 39,000 kg Axle load: 8,000 kg Fifth wheel load: 12,000 kg Load volume: 26 m3 Manufacturer designation for homologation: NW-3 nd Unladen weight: 6376 kg The weight is specified with an accuracy of ±3% nd The manufacturer reserves the right to change the vehicle's technical specifications. Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Air suspension. Side impact protection made of aluminum profiles according to ECE 73. 2 plastic wheel chocks. Wheelbase 1310. Distance: kingpin on 2nd axle: 4800 mm. Steel underrun protection. Foldable underrun protection at the rear. Axles and suspension. 1200 mm fifth wheel height, unloaded. Number of axles: 3. Rigid axles. SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD. 1st lift axle. Support legs. SAF Hercules 2-speed transmission supports, full load. Fenders. Full PVC fenders - 6 pieces. Rubber mud flaps with Wielton LOGO behind the third axle Wheels 6x steel rims 22.5-11.75 ET-120 wheel nut caps Tires 6x tires 385-65-22.5, manufacturer's choice Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Toolbox - 44 L (mounted at the front of the chassis, left side) Water tank 30 L (mounted in the middle of the chassis, left side) Body Volume 26 m3 Front wall tilted 20 degrees Steel hinged hatch Internal height 1515 mm Floor 4.5 mm, side walls 4.5 mm Hardox Lower tension locks - 2 pcs. Other body equipment Operating station on the chassis frame, access on the left in FR (Driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) PVC roll-top tarpaulin Bdjdpfx Ajutz Uysa Ish Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco 2S/2M braking system Chassis paint finish Chassis paint finish RAL 7021 (black-gray) Body paint finish All steel parts are blasted twice before painting. Body paint finish RAL 7001 (silver-gray) Tarpaint finish Tarpaint finish RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1 Electrics Full LED lighting LED reversing light - 1 pc. 2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Additional systems Control cable for lift axle from the driver's cab Pre-assembled brake This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Marking Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Warranty 24 months for the complete product fr

Condition: used, maximum load weight: 29,947 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 04/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, total length: 13,830 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Strong Light Curtain Side Semi-Trailer Fifth Wheel Height: 1145 mm Side Loading Height with Lifting Roof and Internal Height 2700 / 2610 mm Side Loading Height without Lifting Roof and Internal Height 2700 / 2560 mm Neck Height: 120 mm Overall Length: 13,830 mm Platform Internal Length: 13,620 mm Overall Width: 2,550 mm Platform Internal Width: 2,480 mm Internal Width Between Stanchions: 2,480 mm Internal Width Between Longitudinal Beams (without lifting roof): 2,480 mm Internal Width Between Longitudinal Beams (with lifting roof): 2,430 mm Axle Spacing: 1,310 mm Kingpin to 1st Axle Distance: 6,390 mm Technically Permissible Gross Weight: 42,000 kg Technically Permissible Axle Load: 9,000 kg Technically Permissible Fifth Wheel Load: 15,000 kg Accuracy: +/- 4% n.d. External Height: 4,000 mm Unladen Weight: 6,053 kg Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel area. Welded construction, weight-optimized, made from high-strength S700 steel Air suspension Side underrun protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Floor made of 30 mm phenolic resin plywood, load capacity 7.5t plus steel chequer plate at rear approx. 270 mm deep Steel lamp carrier Lashing rings - 19 pairs, 2T each Rubber bumpers at rear Rigid rear underrun protection Steel rear underrun protection Axles and Suspension Number of axles: 3 Rigid axles No axle lift on 3rd axle BPW disc brake axles 3x9000 kg, 22.5 ECO PLUS 3 clamp BPW ET=120 1st Lift axle Fifth wheel height: 1145 mm Landing Legs SAF Hercules two-speed landing gear, full load Fenders PVC fenders – 1 shell, 2 front, 2 rear Rims 6x aluminum rims 22.5x11.75 ET-120 ALCOA DURA BRIGHT Tyres 6x tyres 385-65-22.5, manufacturer optional Other Chassis Equipment Warning panel mounted on rear underrun protection Bozamet 32 pallet box Two chocks with mountings Body Internal height: 2,700 mm Top boards – 4 rows 1st row: aluminum side boards, H=100 mm, 8 pcs. Lifting roof (0, +50) Side curtains with 18 curtain tensioners, side curtain 900 g/m² Aluminum front wall Front wall collision protection (plywood), H=1,500 mm 2nd row: aluminum side boards, H=100 mm, 8 pcs. Bjdpsw N Ua Nsfx Aa Iedh 3rd row: aluminum side boards, H=100 mm, 8 pcs. 4th row: aluminum side boards, H=100 mm, 8 pcs. Quick-release curtain tensioner at front Curtain tensioning device at rear Sliding roof, both sides openable, EDSCHA HYBRID Rear wall with aluminum double wing doors Brake System/Pneumatics Aluminum air reservoir Brake system (Knorr, Wabco, Haldex), manufacturer optional RTR automatic self-leveling (Standard brake system Wabco or Knorr with H-S valve) Chassis Paintwork Chassis painted in RAL 3002 (Carmine red) KTL coating Curtain Colour Side curtain colour Roland 3015 ~ RAL 3002 (red) Other Equipment Paintwork Two-sided paintwork (powder coating) for front wall, doors, and corner posts Additional paintwork in RAL3002 (Carmine red) Electrics 2x 7-pin + 1x 15-pin connections with EBS connection, without connecting cables to the tractor unit Hella LED EASYCONN lighting Markings Partial contour marking with Wielton logo Partial contour marking, side white Partial contour marking, rear red Wielton warning stickers Labelling in German Certificates/Homologation XL Certificate Beverage Certificate All details are subject to change. Errors excepted. Subject to prior sale.

Condition: used, Year of construction: 1992, Spindle arrangement: bottom – right – left – top Planing width min./max. 8-180 mm Planing height min./max. 5 - 120 mm Length of infeed table: 2000 mm Feed rate: 8 m/min Feed rollers: pneumatic Infeed roller before the jointer Electric height adjustment of the feed beam Manual width adjustment via crank 4 planing cutterblocks, each with 2 knives 1 pre-jointer Bodpfx Aoz Abthja Iodh Fold-up safety guard 4 dust extraction connections Total connected power approx. 18 kW Dimensions approx. L x W x H 3000 x 1000 x 1450 mm Weight approx. 1200 kg

Condition: used, Year of construction: 1986, Used Machine Year of manufacture: 1986 Features and technical specifications: - Cuts flush with straight and miter cuts (up to 45°) - For solid strips up to 30 mm - Bevel (0–20°) - Rounds veneer and plastic edges - Workpiece thickness: 5–50 mm - Automatic workpiece clamping - Cutting operation triggered by foot switch - Saw blade diameter: 150 mm - Rounding cutter: 100, radius: 2–3 mm - Saw blade tilt: -20° (bevel) – 45° (miter) Bsdpszyy Aisfx Aa Iodh - Working height: 720 mm - Movable workpiece support: 820 mm - Motor power: 0.55 kW - Pneumatic connection: 5 bar

Condition: used, mileage: 36,419 km, power: 315 kW (428.28 HP), axle configuration: 6x6, color: white, driver cabin: day cab, gearing type: automatic, total length: 79,150 mm, total width: 25,500 mm, total height: 38,800 mm, loading space length: 49,000 mm, loading space width: 23,800 mm, loading space height: 8,000 mm, Year of construction: 2017, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel at [phone number]. Bedez Dm Ukspfx Aa Iodh Mercedes-Benz Arocs 3343 AK 6x6 Three-Sided Tipper A1C Front axle 7.5 t, A1W Differential lock, front axle, A1Y Front axle, straight design, A2G Rear axle, crown wheel 300, planetary gears, 13.4 t, A6C Axle ratio i = 4.833, B1B Electronic braking system with ABS and ASR, B1D Electronic compressed air supply unit, medium, B1F Heater, electronic compressed air supply unit, B1Z ABS, switchable, B2B Drum brake, on front and rear axles, B4A Condensate monitoring, for compressed air system, B4M Compressed air tank, steel, B5B Trailer brake, 2-line, C0B Frame overhang 800 mm, C1R Wheelbase 3600 mm, C5J Fastening parts, for tipper body, C5P Frame bolted, C6C Steering, single-circuit, C6J Steering power pump, unregulated, C6Q Stabilizer, front axle, C7C Rear outriggers, foldable, steel tipper body, proof load 80%, C7J Battery carrier, batteries side by side, C8E Half-shell fenders, for complete tipper, D0S Compressed air connection, in the cab, D1B Driver's air-suspended seat, standard, D1P Co-driver's air-suspended seat, comfort, D1Z Middle seat, with 3-point seatbelt, D2N Seat back release, driver's seat, D3Q Seat cover, velour, D6F Air conditioning, D6I Waste heat recovery, D6M Hot water auxiliary heater, cab, D6Z Construction site filter, D7G Storage compartment lid, driver and co-driver side, D8A Roof hatch/ventilation flap, roof, E0D Battery sensor, Hella, E1B Batteries 2 x 12 V/170 Ah, low maintenance, E1N Generator 28 V/100 A, E3A Voltage converter 24 V/12 V, 10 A, E3B Connection point 12 V/15 A, for additional consumers, E3E Additional socket 12 V/15 A, co-driver footwell, E3L Socket 24 V/15 A, co-driver footwell, E5A Switch No. 1 for external bodywork electrical system, E5H Switch for night running lights, E6A Trailer socket 24 V, 15-pole, E6E Adapter, 15-pole to 2x7-pole socket, F0G Side module, N3G Vehicle, F0Y Mirror housing, construction vehicle, F1O M cab ClassicSpace, 2.30 m, tunnel 320 mm, F3A Cab mounting, standard, steel-sprung, F3W Cab tilting mechanism, mechanical-hydraulic, F4I Rear cab wall, with window, F4X Storage compartment exterior flap, left, F5Y A-pillar trim, F6E Windshield tinted, with band filter, heated, F6I Front mirror, heated, F7B Bumper, corners made of steel, F7D Bumper, center part, towing eyelets, coupling jaw, F7Y Cab entry left/right, movable, F7Z Step, with handrail on the roof, F8E Locking system, with central locking, F8F Comfort locking system, G0A Drivetrain, 44 t to 68 t, G0W Off-road driving program, G2F Transmission G 330-12/11.63-0.77, G4E Transfer gearbox VG 3000-3W, 1.04 switchable, G5A Single-plate clutch, G5G Mercedes PowerShift 3, I1I Tires tubeless, 13 R 22.5 front/front steering/rear steering, I1J Tires tubeless, 13 R 22.5 rear axle, I4J Wheel arrangement 6x6, I5H 33.0-tonner, I6I Vehicle production plant Wörth, I6W Leaf spring suspension, rear axle, J1A Instrument cluster, 10.4 cm, J1R Tachograph digital, EC, speed, ADR, J1S Tachograph manufacturer VDO, J2A CD radio, J2K Speakers, 2-way system, J9A Pre-installation CB radio, 12 V, DIN slot, J9D Pre-installation for toll collection, JETC Battery disconnect switch, electronic, switch in cab and on chassis, JQ8F Hand lever, top, for trailer coupling, JQBF Hook coupling Ringfeder, K4D, ECE R-55, K3V AdBlue tank 60 l, left, K5A Tank 290 l, left, 650 x 565 x 950 mm, steel, K5S Protection cap for AdBlue dosing system, K7D Exhaust system, tailpipe to the right o

Condition: used, Year of construction: 2013, Colour: Grey Price: On request - Year: 2013 - Documentation available: No Bdsdpfxjwz Nxxo Aa Ish - CE certificate present: No - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 - Opening width [mm]: 3000 - Opening length [mm]: 1400 - Number of rotating knives [pcs.]: 0 - Number of fixed knives [pcs.]: 100 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES instruction booklet and CE certification: YES Bjdpjn Dw N Dsfx Aa Ijdh security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50 OTHER Surface Planer machines available as in photos

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 Number of working hours ca. 15.800 h Bdedpfxjxaaghe Aa Ioh 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg Bdodpfx Aaovb Dcmo Ish milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories *

Condition: used, Year of construction: 2008, Saddle stitcher Heidelberg Stitchmaster ST 450 Year: 2008 Operation / Control - Colour monitor - Semi automatic setting Feeders - Number of chain stations: 8 - Hand feeding station(s) - Horizontal signature feeders: 1 x DHU 450 - Vertical signature feeders: 4 x DVU 450 - Cover feeder: CHU 450 - Excl. Pump(s) Stitching unit Heidelberg Stitchmaster ST 450 - Thickness control - Stitching heads: 2 - Delivery to the left - Reject gate, for incomplete products Trimmer Heidelberg TR 150 - Sets of knives: 2 Delivery Heidelberg CHA - Compensating stacker Bsdpfx Aajh Ezmie Isdh - Delivery to the left Technical specifications: Max. mechanical speed 14.000 cycles/hour Sizes (uncutted) Max. 320 x 480 mm Min. 85 x 128 mm Sizes (cutted) Max .315 x 475 mm Min. 80 x 120 mm Product thickness: max 12 mm

Condition: excellent (used), CATALOGUE NUMBER 7610 Technical data: - inlet width 410mm - inlet height 140mm - roller width 430mm - roller diameter 400mm - number of knives 2 pcs - screen dimensions 80x130mm - top roller, grooved - bottom 2 rollers, grooved - feed belt length 2850mm - feed belt width 390mm - auto-reverse - main motor 30kW - feed motor 2 x 2.2kW - machine dimensions (L/W/H) 4800x1550x1200mm - weight approximately 2200kg Bjdpoztq Uvsfx Aa Ijdh ADVANTAGES - Made in Poland - Auto-reverse - With feed conveyor - DTR documentation - Used shredder, very good condition Net price: 75900 PLN Net price: 17651 EUR Net price calculated using the exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: new, Thickness planer HOFMANN, model D 636 - new TERSA cutterhead with 4 knives 5.5 kW motor, 400 V, 50 Hz, electronic start and brake unit Modern control panel ergonomically positioned. Electric adjustment of the thickness table with push buttons for adjustment in rapid or slow mode, as well as adjustment to within 1/10 mm, integrated operating hour counter. Thickness table on four support spindles and with 4-point guidance. Rubber infeed roller and 2 rubber outfeed rollers. Segmented pressure bar, rotary knob for pre-tensioning the outfeed pressure bar Dust extraction port Ø 160 mm, to the left. Integrated tool storage compartment including options: - Motor power 7.5 kW instead of 5.5 kW - Stepless feed rate 4-22 m/min, instead of the 2 feed speeds Bdjdpezylvusfx Aa Ieh - Positioning control for D 636 with 250 memory slots

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding length: 1,500 mm, grinding spindle motor power: 7 W, grinding wheel diameter: 200 mm, GOCKEL G50 el straight knife sharpening machine Machine has been overhauled and is in perfect working order. Mechanical feed. Variable feed rate. Bdjdpfez D H Rlex Aa Ish 7.5 kW spindle.

Condition: used, power: 155 kW (210.74 HP), fuel type: diesel, color: yellow, mast type: duplex, Year of construction: 2018, operating hours: 11,999 h, Year of manufacture: 2018 Drive: Wheeled Number of cylinders: 4 GVW: 46,000 kg Body manufacturer: LIEBHERR LH 50 LITRONIC CE marking: yes LIEBHERR LH 50 M LITRONIC MATERIAL HANDLER YEAR 2018 TOTAL WEIGHT 46,000 KG REACH 20.0M CE MACHINE ENGINE D934 A7-04 POWER 155KW / 210 HP WHEELBASE CM Bodsy T Rdgjpfx Aa Iedh GROUND CLEARANCE CM WIDTH OF THE UNDERCARRIAGE CM 4-POINT OUTRIGGERS HYDRAULICALLY RAISABLE CABIN 3RD AND 4TH HYDRAULIC LINE INDUSTRIAL STRAIGHT MONOBOOM Z INDUSTRIAL STICK, STICK END WITH ANGLE 5-TINE GRAB MULTI-TINE GRAB CAPACITY 1.10-1.70M3 CRANE IS READY FOR WORK WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, operating hours: 130 h, functionality: fully functional, power: 8.09 kW (11.00 HP), first registration: 12/2011, fuel: diesel, driver cabin: day cab, Equipment: all wheel drive, car registration, Park Ranger 2150 Nilfisk Egholm Park Ranger 2150 - Used Unit Year of Manufacture Base Unit: 2011 Cab: 2015 Operating Hours: 129 Technical Data - Base Unit Length mm 2225 Width mm 1015 Height with / without cab mm 1935 / 1210 Weight with / without cab 1) kg 670 / 560 Payload kg 630 / 740 Permissible Total Weight kg 1300 Engine: Perkins Diesel 403J-11 HP / kW 26 / 19 Four-wheel drive: Standard Drive System: Hydrostatic drive. Completely hydraulic operated machine carrier: requires minimal maintenance. Performance: Turning radius - curb to curb mm 3000 Turning radius - inside mm 1100 Working speed, max. km/h 16 Articulated Steering Quick-change system for all attachments Trailer hitch Liquid wax coating 12-Volt socket: For mobile phone charger Attachments Front sweeper (summer) with 3 side brushes from 2015 Height adjustment: The front wheel on the brush unit adjusts the optimum sweeping height while minimizing brush wear. Weight: 91 Kg Brush rotation speed: Infinitely adjustable. Dimensions Length mm 2900 Width mm 1200 Height with mounted hand suction hose mm 2200 Dimensions when parked Length mm 1350 Width mm 1010 Height mm 1920 Working width - 2 brushes: 1220 mm Working width to the 3rd brush: 1660 mm Hand suction hose: 6 meters Sweeper hopper from 2015 Net capacity: 438 liters Gross capacity of the sweeper hopper: 458 liters Sweeper hopper payload, max: 300 Kg Tipping height: 1300 mm Weight: 131 Kg Capacity of the fresh water tank: 100 liters Front sweeper (winter) from 2011 Dimensions Length: 3020 mm Width: 1220 mm Height with cab: 1935 mm Dimensions when parked Length: 900 mm Width: 1220 mm Height: 650 mm Weight: 101 Kg Performance Clearing width, straight position: 1220 mm Clearing width - 25°: 1140 mm Ground clearance under the brush: 420 mm Brush diameter: 550 mm Working speed: 1-10 km/h Theoretical sweeping performance: 12200 m2/h Clears snow depths of up to: 150 mm Brush rotation speed rpm 255 Swivel angle 25° Salt and grit spreader from 2011 Durable material: All parts in contact with salt and grit are made of corrosion-resistant plastic or stainless steel. Extra spreading material: Additional bags of salt and grit can be stored on the grid of the spreader hopper until the total weight is reached. This allows you to refill on the go. Support: This is used for quick and tool-free installation and removal, as well as for storage when not in use. Installation and removal are tool-free and easy on the back. Cover: Protects the spreading material from moisture. Dimensions Length: 2510 mm Width: 1015 mm Dimensions when parked Length with support: 1175 mm Width: 800 mm Height with support: 1350 mm Weights Weight with cab: 860 Kg Payload with cab: 440 Kg Weight (salt and grit spreader): 97 Kg Bedpfx Aszf Ezboa Iedh Spreader Volume: 210 liters Spreader payload, max: 350 Kg Loading height: 1250 mm Performance Spreading width: 1000-5000 mm Operating speed: 1-16 km/h Subject to changes, printing errors, and prior sale. All information is provided without warranty. Sale is made excluding any guarantee or warranty.

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant Bedpfx Aaoz Ea Ite Isdh _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Condition: good (used), Year of construction: 2012, cutting diameter 260 mm saw band length 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square 260 x 260 mm capacity 60 degrees: flat 320 x 260 mm cutting length min. 6 mm cutting speed 12 -120 m/min Control KASTO BasicControl total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade; designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade; selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable from 0 – 300 mm/min • Hydraulic saw blade tensioning • Double-vice system: workpiece clamped on both sides of the saw blade • Linear guides on saw head, material feed, and vice assemblies Bjdpjz Dxr Isfx Aa Iedh • Saw blade retraction mechanism for contact-free withdrawal of the blade from the cut channel • SpeedControl (minimum speed monitoring) • Material feed: single stroke up to 850 mm, multiple feed up to 9,999 mm, chain-cut capability down to 250 mm cut length • Control system: KASTO BasicControl with 5.4" color touchscreen

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom Bdsdpjwzmu Rjfx Aa Ieh ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Stegherr Cross rung milling machine TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Bedeyrtzqopfx Aa Ijdh Clamping is machined on three sides. The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Operating instructions in German or English. Table base EUR 1.070.00 Foot switch EUR 900.00 Adjustment optics EUR 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Price per piece EUR 650.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) EUR 190.00 HM saw blade, price EUR 170.00 per piece (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to the tools provided by the customer, price EUR 700.00 per individual tool Packaging in a crate (suitable for land transport) EUR 650.00 Packaging shrink-wrapped on a pallet (only within Europe, not for air freight) EUR 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Bdsdjyy A Iqopfx Aa Ijh Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Bdodjz Elvpopfx Aa Ieh Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible

Condition: excellent (used), Catalog number: 7973 TECHNICAL DATA - Inlet width: 410mm - Inlet height: 210mm - Shaft width: 430mm - Shaft diameter: 330mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 50x50mm - Toothed drawing shaft (bottom) - Lower shaft motor: 1.1kW - Toothed drawing shaft (top) - Upper shaft motor: 1.1kW - Vibrating screen - Vibrating screen length: 4160mm - Vibrating screen width: 370mm - Main motor: 45kW - Auto-reverse (adjustable) - Reverse gear - Overall machine dimensions (L/W/H): 2150x1450x1050mm - Overall vibrating screen dimensions (L/W/H): 4160x650x880mm - Weight: approximately 2500kg ADVANTAGES - German-made - Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload - Reverse gear Bdodpezw I Hkofx Aa Ioh - DTR documentation - Used shredder, very good condition Net price: 73900 PLN Net price: 17186 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8053 TECHNICAL DATA - Shaft width: 410mm - Noise-reducing comb - Number of knives: 4 pcs Bedjztzknjpfx Aa Iedh - Bed length: 2000mm - Cast iron beds - Both beds are adjustable - Original adjustable guide rail with angle adjustment - Motor: 4kW - Dimensions (L/W/H): 2000x900x1300mm - Weight: 610kg ADVANTAGES – Made in Poland – Upper control panel – 4-knife shaft – Used thickness planer – Very good condition Net price: 6900 PLN Net price: 1605 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)