Working platform semitrailer

KÖGEL Multi Chassis, verstärkt, Bordwände

Condition: new, maximum load weight: 35,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction with through-running crossmembers, with chassis frame extension. * Coupling plate approximately 8 mm thick * with a 2-pin kingpin according to DIN 74080 / ISO 337 Suspension * For indivisible loads, an increase in the total permissible weight is permitted. * Axle lift mechanism on the axle * 1 automatic axle lift control, load-dependent * Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h * Manufacturer of your choice: Kögel Three-axle unit * with disc brakes Ø 430 mm * Embedding depth approximately 120 mm * Air suspension with approximately 180 mm travel. Vehicle tires * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5, AUSTONE ATH155 164K long haul Chassis components * Kingpin supports (manufacturer of your choice from Kögel) mechanically with leveling foot, approximately 24 t lifting capacity * One-side operation on the right side when driving * Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5 * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with splash flaps between the 1st and 2nd axle * 1 pair of quarter-circle fenders with splash flaps behind the axles * Storage box for: 10 sideboards, folding stakes, and rear door/rear flap. Closed on all sides * Protected against spray, also serves as a side protection device * 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installation at the rear, 1x left and 1x right * 1 pair of pull-out warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear area of the vehicle Brake / Air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as a spring brake, external pneumatic connections, as well as external EBS diagnostic connection via ISO 7638 plug connection * Wabco EBS system * Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving, behind the axle unit * Driving position adjusts automatically Floor * Plate floor approximately 30 mm thick * Recess pockets for square tube inserts approximately 80 x 80 mm, arrangement according to drawing J9 * 8 pieces of recess pocket strips (18 recess pockets per strip: 4 pieces each on the outside + 10 pieces in the middle) * Body meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approximately 27,000 kg Front wall * Storage for a maximum of 20 square tube inserts approximately 80 x 80 mm (length approximately 1,990 mm) on the inner side of the front wall * Front wall approximately 2,000 mm high with steel corner posts, with profiled sheet steel, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640 Rear wall * Hinged rear wall approximately 600 mm made of aluminum hollow profiles with 3 tension rods and T-bar locking * 2 folding steps on the inside. Hinged steel corner posts at the rear, at Gbedpfx Acszrkbgeist