Used Start Hole Drilling Machine for sale (70,431)

Condition: excellent (used), Control: Heidenhain TNC 124 Travel paths X/Y/Z: 500/250/160 mm Travel path W: 480 mm Clamping area (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Bdedjyvrfdspfx Acvsa Tool quick-change system: SF 32 Stepless speed range: 9200 rpm Drive power: 5 kW Required space (W x D x H): 1850 x 2550 x 2400 mm

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Dowel insertion tool for 8 x 40 mm dowels The following issues were identified during testing: Bdedpfx Acjytq R Eovja - Glue specification missing - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field - SPS module Beckhoff repeatedly fails. Machine must then be restarted. - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: used, Year of construction: 1989, Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm Bjdpfxehx E T Hj Acvoda -Weight: 150 kg

Condition: excellent (used), Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm Bodpfxjhv S Eto Acvsda -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Manufacturer: Gosmeta, pillar drilling machine type B-30N -Motor: 1.1kw -Speeds: 110 - 920 rpm, 5 levels -Table size: Ø 330 mm, travel 510 mm -Spindle mount: MK3 -Spindle stroke: 125 mm -Projection: 300 mm -Columns Ø: 120 mm -Dimensions: 490/750/H1850 mm Bjdpehx E Ugsfx Acvjda -Weight: 282 kg

Condition: good (used), Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg Bedpjc Rpnnsfx Acvjda

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 150 mm Bsdpfxjwp Tp De Acveda thread capacity 30 M spindle taper MT 4 MK column diameter 125 mm bore spindle turning speed range 132-1852 U/min table-size 480x480 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, horizontal glass drilling machine Bdedsyub Azopfx Acvja with extendable roller table 700 mm machine sizes : L : 1850 mm , H : 1800 mm , depth : 1200 mm

Condition: used, bore capacity in steel St 60 18 mm 23 mm spindle MK 2 bore depth 100 mm throat 240 mm column diameter 82 mm 340x280 mm T-Slots Amount - Width - Distance 2 x 13 x 125 mm Spindle Speed 125-2.000 U/min 160-880 mm total power requirement 0,45/0,8 kW weight of the machine ca. 205 kg Bdjdpeyv N N Tefx Acvoa dimensions of the machine ca. 765x510x1850 m

Condition: used, Year of construction: 2008, bore capacity in steel (diameter) 32 mm Bjdpfx Acsyv N Dqoveda throat 232 mm bore stroke 150 mm Spindle Speed 115 - 2470 U/min. weight of the machine ca. 280 kg dimensions of the machine ca. 500 x 950 x 1800 mm

Condition: new, bore capacity in steel (diameter) 40 mm bore stroke 190 mm turning speeds 50-1800 U/min Short spindle MK 4 Bedpfsyv Nr Uox Acvoda Table dimensions 500x400 mm total power requirement 2,2 kW weight of the machine ca. 330 kg dimensions of the machine ca. 670 x 500 x 2120 mm

Condition: new, 32 bore stroke 125 mm Short spindle MK 3 throat 210 mm Machine table - usable table surface 390x390 mm table load 65 kg spindle turning speed range 105-2.650 UpM total power requirement 0,75 kW Overall size 750x450x1745 mm weight of the machine ca. 192 kg Standard equipment: - Number of speed ranges 9x2 steps - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug therefore immediately ready for use - Drilling table adjustable via gear rack - Depth stop with scale Bjdpfjyv Nqwox Acvsda - Emergency stop - According to current CE conformity

Condition: used, bore capacity in steel (diameter) 32 mm Short spindle MK 3 bore depth 175 mm spindle throat 320 mm column diameter 130 mm distance spindle /table 140-790 mm feed 0,1 - 0,16 - 0,25 m/min Bdodpfxeyv I Uns Acvoa number of spindle speeds 60-1600 weight of the machine ca. 450 kg

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Bedpfxjyucahs Acvoda Condition: Very good, used but like new Available immediately from stock.

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 50 mm Bsdpjyv N Eusfx Acvsda bore capacity in cast iron GG 20 70 mm arm length 2000 mm morse taper MK 5 Spindle Speed 28-1.250 U/min. spindle stroke 330 mm total power requirement 8 kW weight of the machine ca. 5.500 kg

Condition: used, Year of construction: 1996, bore capacity in steel (diameter) 60 mm arm length 1600 mm workpiece height max. ca. 1300 mm borehole diameter in Stahl 80 mm borehole diameter in Guss 100 mm threading in St 60 M55 mm Bjdjyv N Ehspfx Acvjda spindle turning speed range 29-1.450 U/min Spindle Speed 12 Stück boring spindle 100 mm morse taper MK5 spindle stroke 350 mm total power requirement 7,5 kW weight of the machine ca. 4.600 kg dimensions of the machine ca. 2600x1100x3200 mm

Condition: refurbished (used), Year of construction: 2002, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Completely overhauled in 2026 • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle Morse taper 4 • Infinitely variable speed adjustment • Stepless quill feed • Thread cutting device • Two 18 mm T-slots each on the machine base at rear and left • Machine lamp • Central lubrication • Table surface machined all around • Safety guard on drill • Coolant system Dimensions and Travel Tool holder: MT 4 Column diameter: 195 mm Table dimensions: 1200 x 750 mm Number of T-slots: 5 T-slot spacing: 125 mm Quill stroke: 220 mm Column stroke: 450 mm Distance, spindle nose — min. 40 mm to top of table: max. 710 mm Distance, spindle nose — min. 840 mm to base plate: max. 1510 mm Drilling radius: min. 540 mm max. 1590 mm Bedpfeyv A Ucex Acveda Work table height: 900 mm Machining Data Drilling capacity (solid): St 60 up to Ø 45 mm GG 22 up to Ø 55 mm Tapping: St 60 up to M36 GG 22 up to M45 Main Spindle Drive AC motor, frequency-controlled Power: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: up to 250 Nm, constant across 15 – 200 rpm Feed Drives Infinitely variable feed: 0.02 – 0.7 mm/rev Feed force: 12,000 N Electrical Data Operating voltage / freq.: 400 V / 50 Hz Control voltage: 24 V Total connected load: 9.3 kVA Weight DANUFLEX 145 (without packaging) With 750 x 1200 mm table: 2600 kg Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Condition: used, bore capacity in steel (diameter) 20 mm throat 322,5 mm bore stroke 160 mm bore capacity in cast iron 23 mm feed 1-3000 mm/min tool taper SK 30 spindle speed: 55-5000 U/min table surface area ca. 614 x 370 mm column diameter 145 mm machine weight ab. 550 kg with multi-spindle boring head ARBO 20 Automatic turret drilling head with 6 machining stations TYPE ARBO 20 6 work spindles of your choice incl. spindle guard, flange quill, extended column, special software, without protective cover on the machine table manual included (machine and turret drilling head) machine is in a good condition, liitle used. Preowner is a public institution Standard Equipment Machine table adjustment and clamping at the rear of the machine Full motor protection with PTC thermistors for protection against thermal overload - with insulation class F (155°C) Infinitely variable speed control Protection class IP 54, control voltage 24 V Mushroom-shaped pushbutton (latching) for emergency stop on the control panel Main switch (lockable) Technology computer for cutting data determination and machining cycles Drilling depth programming with automatic rapid traverse forward/reverse Precision synchronous tapping without compensating chuck, max. 10 threads/min (spindle speed dependent) Special software for freely programming machining cycles according to DIN/ISO standards Drilling depth input via numeric keypad Bdsdjyrhynjpfx Acvja Zero point adjustment via external handheld control unit Operating hour counter for spindle, feed rate, and piece count

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Bdjdpfxsfu Iwme Acvsa Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Bedefu Swxepfx Acvsda Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 E Fully automatic drilling machine, measuring length 6000mm (2-axis NC drilling machine) Item No. 6019 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X and Y values ​​or calling up a program that has already been written, the machine works completely independently. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 2-axis control incl. LAN interface for data transmission Pneumatic vice (span 200 mm) Alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV Alternatively also with Unimax 4 Basic (For technical data see data sheet) anti-rotation device tapping device motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Bjdpsfu Irzsfx Acvoda Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile as dirt protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / Mounting bracket / roll width 407 mm / insert plates / struts Roller diameter 50 mm / steel rollers It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm Bdsdpfx Acefu Itbsvoa NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. Bodpefu Ivzofx Acvjda • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Bodpfx Ajxwaz Hocveda

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings Bdjdpoxlqxfofx Acvsa