Used Start Hole Drilling Machine for sale (69,751)

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm clamp 3 piece grid 32 mm required space ca. l x w x h mm 1200 x 800 x 1600 weight ca. 370 kg total connected power 2,2  kW located in  97447 Gerolzhofen Gisdpsvwgagjfx Afnsn sale in current condition as seen - free on truck -

Condition: used, Year of construction: 1989, with many drills used, top condition Make Hoffmann Type DB 23 Year of manufacture 1989 Machine no. 169 Number of spindles 23 Number of drilling beams 1 Spindle spacing / grid 32 mm Drilling from below stroke 60 mm Stop rulers with central adjustment Working width 704 mm (1080 - portal passage) Drilling depth 70 mm horizontal Drill holder M 10 / cone 30° Space required approx. 1300 mm x 1000 mm x 1300 mm Godjvyurcspfx Afnsin Weight approx. 500 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Gsdpfjx E Ingjx Afnsin Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, pressing device, stop rulers Godpfx Afevtm Ayenoin

Condition: used, GANNOMAT Compact 30 hole drilling machine - used - pneumatic clamps, foot control, 2 drilling beams with 15 spindles each ----- Technical specifications ----- Number of spindles: 30, Drill spindle spacing: 32 mm, Motor power: 2 x 0.75 kW, Voltage: 400 volts, Pneumatic connection: 6 bar, Dimensions without stop ruler: 850 x 1,100 mm, Weight: 240 Giedpfxowmmt Re Afnsn

Condition: good (used), Year of construction: 2009, operating hours: 20,709 h, functionality: fully functional, machine/vehicle number: 106516-11, drilling depth: 1,200 mm, overall weight: 7,500 kg, For sale: A very well-equipped deep hole drilling machine from TBT, including various accessories. Drilling specifications: - Spindle 1: 5–18 mm; Spindle 2: 1–4 mm - Drilling depth: approx. 1200 mm with Ø8 mm using 3 steadies - Number of spindles: 2 - Spindle drive: Spindle 1: 1 x 4 kW; Spindle 2: 1 x 1.2 kW - Spindle speed: Spindle 1: 600–6000 rpm; Spindle 2: 2000–24000 rpm - Rapid traverse: 15,000 mm/min - Saddle stroke (nominal): 1800 mm Gjdpfx Afexgnhasnsin - Coolant: Deep hole drilling oil - Tank capacity: 1,100 liters - Operating voltage: 3AC 400V, 50Hz (Total connected load: 25 kW) Condition: Good, appropriate for its age Accessories: Includes drip tray and various drills On-site inspection is recommended!

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, total height: 2,000 mm, total length: 1,500 mm, table width: 220 mm, overall weight: 700 kg, table length: 460 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being sold at auction due to closure of operations. Bidding requires timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 460 x 220 mm Hole size: 0.2 - 3.0 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Connection: 3.8 kVA Dimensions & weight Dimensions (L x W x H): 1,500 x 1,100 x 2,000 mm Giedpfx Aexqn Hkefnjn Weight: 700 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, total height: 2,850 mm, total length: 2,500 mm, total width: 2,400 mm, workpiece weight (max.): 6,000 kg, table width: 800 mm, overall weight: 6,000 kg, type of input current: three-phase, table length: 1,800 mm, drilling depth: 500 mm, Technical equipment -Automatic swivel head +-45 degrees -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling Gjdpfxevppxpo Afnein -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M02-4-320, Deep hole drilling machine Gisdpfx Afjx Ezllenon For technical data, please refer to the attached images

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm Gijdpfxeh Dpv Re Afnjn + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2800x1100x2200 mm Gsdpfx Afevz Hwaonsin Weight 1100 kg Total power requirement 8,8 kw Horizontal and vertical drilling machine MULTI MZ3x8 - Max. Center Distance Between Holes 2440(L)mm x 300(W) mm- Min. Center Distance Between Holes 220(L)mm x 32(W) mm - cess length 2440 mm - cess length 220 mm - Plate thickness 12~40 mm - Total number of drilling bit 32pcs - Horizontal backside drilling rows 4 rows - Max. drilling dia. 35 mm(Single bit) and 13 mm (Multi)- Max. drilling depth 50 mm - Dia. of drilling bit shaft 10 mm - Length of drilling bit 57 mm/70 mm - Drilling bit speed 2840 rpm - Qty of horizontal L&R drilling rows 2 rows - Qty of vertical up drilling rows 2 rows - Air pressure 0.5~0.6 Mpa - Total power 8.8 kw - Net weight 1100 kg - Overall dimension 2800 x 1100 x 2200 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x1050x110 mm Weight 350 kg Gijdpfxevz Er Ao Afnon Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1100x1350 mm Godevz Eizspfx Afnoin Weight 500 kg Total power requirement 3,5 kw

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW Drilling unit: swiveling Giodpfsxc Hi Uex Afnjn

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Drill pitch: 32 mm Godpfx Aswv Nb Nofnjin Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 pcsPitch: 32 mmDrill chuck: Clamping surface of drill shank: 10 mmOperation: foot pedalTools included: yesDrilling direction: from below & end faceTilting: manualTilting angle: only 0° or 90°Max. pass-through height: 80 mmMax. pass-through width: 750 mmNumber of material clamps: 3 pcsType of material clamping: pneumaticDesign: stationaryStop system: only for structural seriesWeight approx.: 400 kgMotor power: 1.5 kWDust extraction diameter: 120 mmStorage location: with customer Gedpeihghrefx Afnein

Condition: good (used), Year of construction: 2011, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, total length: 3,500 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 2,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,000 mm, table width: 680 mm, feed length W-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, DRILLING CAPACITY: - Twist drill diameter: max. 16 mm - Single-lip drill: 4–16 mm - Thread cutting: max. M12 Gedpfx Ajwxq E Uefnein

Year of construction: 1983, condition: used, machine/vehicle number: 508323, 21-spindle, pitch 32 mm tool holder M 10 external thread spindle distance max. 640 mm Godpfx Asdardxofnsin Gantry passage max. 1056 mm, stop length 2500 mm with 4 swiveling stops drilling unit with motor 2,2 kW drilling head swiveling, drilling from below height adjustment max. 80 mm drilling depth max. 80 mm, ex location Seevetal, as viewed, subject to prior sale

Condition: refurbished (used), 2-spindle deep hole drilling machine under reconstruction Gjdpfx Afox E U S Esnjin

Condition: like new (used), The machine is completely overhauled and therefore as good as new! Technical specifications Drilling method : single-lip drilling Number of spindles 1 Drilling range in steel D= 1-6 mm Gijdofgwlbjpfx Afnen Drilling depth 420 mm Max. workpiece length 420 mm Manufacturer: TBT / SFT New electrics and new controls!

Condition: excellent (used), This machine was overhauled in 2025 and is therefore in like-new condition! Technical data: - Min. drilling diameter 16 mm - Max. drilling diameter 35 mm - counter boring 65 mm - Max. drilling depth 1,400 mm using BTA method Gjdpfxjwq I Iqj Afnjin - Required machine footprint approx. 6,100 x 3,100 mm - Max. machine height 2,400 mm - 2 separate drilling units, mounted on base machine bed, spindle distance 600 mm - Flat guideways - Feed drive via ball screw and feed gearbox - Rapid traverse speed 4,000 mm/min - Feed speed max. 230 mm/min - Drive power per drilling spindle: 11 kW (2 pieces) - Infinitely variable speed up to max. 6,000 rpm - Hydraulically attachable tailstock with counter run - Tailstock manually movable on base plate with T-slots - Enclosure with sliding doors - 1 steady rest each - 1 rotating clamping bell holder, basic holder each - 2 pre-centering devices each - Drilling depth control via cams and limit switches - CNC control SFT and FU, connection 380 V / Rated current 80 Amp. - Each unit has its own control and own feed motor With this machine you actually receive 2 single-spindle machines, as each spindle is operated separately with its own control and feed motor.

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm Godsxyf E Nspfx Afnein • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles 1 full drilling 5-40 mm Gijdpfed S Ualsx Afnjn Drilling depth 1.000 mm

Condition: used, Year of construction: 2016, machine/vehicle number: M99955/3533513, Pipe Cutting Machine FZH VARIO 2 with 2.9m Magazine (Year 2016) Automatic pipe cutting line VARIO 2 by FZH Maschinenbau GmbH, manufactured in 2016. This line is designed for the cutting to length of round pipes and has been used in serial production of furniture fittings. The system comprises a magazine with singling system, feed unit, pipe cutting head, as well as extraction and deburring unit. Application areas: – Automatic cutting of round pipes in series production – Pipe diameter approx. Ø 6.0–78.0 mm – Wall thickness approx. 0.1–1.5 mm (plastics up to approx. 2.0 mm) – Cut lengths from approx. 70 mm, with typical lengths from 200–1,200 mm – Suitable for steel pipes (e.g., E195) and various other pipe materials Machine basic data (extract from manufacturer documentation): – Pipe diameter (outside): Ø 6.0 mm to 78.0 mm – Wall thickness: 0.1–1.5 mm (plastics up to 2.0 mm) – Cut lengths: 70–700 mm in one feed cycle, longer lengths by repositioning – Minimum cut length: 70 mm – Shortest scrap length: 150 mm – Pipe input: by the meter or from coil – Cycle time for cutting only: approx. 4 s (material dependent) – Feed time for 200 mm pipe length: approx. 2 s – Feed time for 500 mm pipe length: approx. 5 s – Feed time for 1,200 mm pipe length: approx. 16 s Condition / maintenance: Godpfox Hqd Tjx Afnjin – Well-maintained used condition from family business – System was regularly serviced – Technical documents (offer, layout drawing, specifications) available – Photos of the complete line including magazine and deburring unit available Inspection possible by appointment. Dismantling and loading can be organized in coordination with the buyer.

Year of construction: 1986, condition: used, - working length (mm): 3200 - drilling units: 3 from below with 3-spindle drilling head - Hold down: 2 from above - pressure cylinder: 1 from the side - control: Siemens of newer construction Gsdpfx Afe Drmxjnjin