Used Stanko 1A616 for sale (50)

Condition: used, Year of construction: 1967, turning diameter over bed 500 mm turning diameter over slide rest 320 mm turning length 2100 mm Rodpfx Absxwzdcedjn centre height 250 mm spindle bore 60 mm spindle turning speed range 11 - 2000 U/min total power requirement 7,0 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 4,3 x 1,2 x 1,3 mm Lathes with: - 4-position tool post - 3-jaw chuck 315mm - Centering point

Condition: ready for operation (used), Year of construction: 1977, Table diameter: 800mm Redpfeyghxgex Abdjn Max. diameter: 1000mm Max. stroke: 200mm Max. module: 12

Condition: excellent (used), Year of construction: 1976, Max. diameter: 560mm Rjdpfx Aboyghvlsdsn Working length: 3550mm Max. workpiece length: 4000mm

Condition: ready for operation (used), Year of construction: 1967, Swing over bed: 800mm Swing over support: 450mm Rodsyghpropfx Abdjn Turning length: 2800mm Workpiece weight: 5000kg

Condition: ready for operation (used), chuck outer diameter: 1,400 mm, total height: 4,100 mm, empty load weight: 20,000 kg, Type: Stanko 1516 Rodpfev Sftzjx Abdjn Maximale werkstukhoogte: 1000 mm Verticale schuifmaat maximale horizontale slag: 950 mm maximale verticale slag: 700 mm Horizontale schuifmaat maximale horizontale slag: 630 mm maximale verticale slag: 1000 mm Dwarsbalk maximale slag: 660 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long: 3170 mm Wide: 3030 mm

Condition: repair required (used), Year of construction: 1996, operating hours: 26,634 h, functionality: limited functionality, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, STANKO SMO-32 Rjdpfexvygmsx Abdsn X500 Y400 Z400 Heidenhain path control TNC355 Year of manufacture: 1996 Frequency inverter on the Y-axis is defective or jerks during axis movement. Optional SK40 tool holders available. The machine is currently still connected to the power supply and can be tested.

Condition: repair required (used), STANKO 2 A 554 Rodetpu Tqepfx Abdjn The machine is in perfect working condition except for the clamping of the boom lifting device and is currently still in operation. The clamping would have to be reassembled and readjusted, all parts are present. For safety reasons, the boom is secured with a tensioning strap, the clamp for the lift is in clamped condition. Technical data: - Drilling capacity 60 mm - Projection 1600 mm - Drill spindle holder MK 5 - Drill spindle stroke 390 mm - Spindle speed, 20 steps 20 - 2000 rpm - Clockwise and counter-clockwise rotation - Feed rate, 12 steps 0.056 - 2.5 mm/rev - Drive 400 V / 12.8 kW - Clamping of the arm and drilling unit electromechanical - Distance machined machine bed - drilling quill - min. approx. 900 mm - max. approx. 1600 mm - usable machine bed with 4 T-slots 950 x 1700 mm - Coolant device - Cube table - Space requirement approx. W 2600 x H 3000 x D 1000 mm - Weight approx. 4500 kg

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Rjdpjwpud Asfx Abdsn Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: used, Year of construction: 1975, roll diameter 440 mm throat 420 mm workpiece height 200 mm cutting speed 20 - 1550 m/min table surface area 560 x 560 mm band length 3250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Rjdpfx Aevu Hb Eebden dimensions of the machine ca. 1,2 x 0,8 x 2,1 m Bandsaw with - Saw blade welding unit - Grinding stone - Saw bands - documentation

Condition: used, Universal boring head STANKO Spindle tool, spindle head Tool holder: SK 40 - M16 Adjustment bushing holder: Ø 36 mm Adjustment range: 17.5 mm Adjustment accuracy: 0.01 mm Tool shank: Ø 18/22 mm Machining diameter: approx. 10-45 mm - Adapter SK40 to adjustment bushing Ø 36 mm - Boring head with adjustment bushing shank Ø 36 mm Net weight: 5 kg Redpfxjxciv Dj Abden Very good condition

Condition: used, Year of construction: 1972, Dreh-Øüber Bett 400 mm Dreh-Øüber Support 220 mm Redpjvzhhyofx Abdon turning length 1000 mm spindle turning speed range 12,5 - 2000 U/min spindle taper Bajonett 55022 spindle bore 47 mm feeds - longitudinal 0,07 - 4,16 mm/U feeds - cross 0.035 - 2,08 mm/U thread - mm pitch mm thread - inch 2 - 24 Gang/ inch. rapid travel - longitudinal/face 3,4 / 1,7 m/min spindle drive 11 kW power capacity 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Redpfxsd Dk A As Abdjn Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: good (used), Universal milling machine STANKO 676P Longitudinal table travel X: 400 mm Vertical table adjustment Y: 380 mm Upper arm transverse adjustment Z: 250 mm Clamping surface of the vertical table clamping surface: 250 x 630 mm Spindle mount: MK 4 Quill stroke: 60 mm Swivel angle of the vertical head: +-90° Table size of the rigid angle table: 800 x 250 mm Distance between horizontal milling spindle and rigid angle table: 80 - 460 mm Distance between vertical milling spindle and rigid angle table: 0 - 380 mm Distance between vertical vertical spindle and column: 125 - 375 mm 16 spindle speeds horizontal: 50 - 1630 rpm. 16 spindle speeds vert.: 60 - 2040 rpm. 16 longitudinal and vertical feeds: 13 - 395 mm/min. 16 headstock feeds: 13 - 395 mm/min. Rapid traverse all axes: 0.935 m/min. Rjdpjtrybgefx Abdon Drive power: 2.2 kW Weight approx.: 1.4 t used, in good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1972, operating hours: 24 h, machine/vehicle number: 2025, overall weight: 5,200 kg, power: 10 kW (13.60 HP), input voltage: 380 V, input frequency: 50 Hz, broaching length: 320 mm, workpiece diameter (max.): 630 mm, total length: 2,650 mm, total width: 1,810 mm, total height: 2,890 mm, Slotting Machine STANKO 7M430 The STANKO model 7M430 is a heavy-duty vertical slotting machine, designed for machining internal keyways, slots, internal splines, and profiled surfaces in large and heavy workpieces. Manufactured in 1972, this machine is intended for industrial applications requiring robust construction, high rigidity, and reliable operation. The machine is equipped with a rotary worktable with a diameter of 630 mm, allowing flexible positioning of workpieces. The maximum stroke length of the ram is 320 mm (minimum stroke 120 mm), providing a wide working range for various slotting operations. The slotting head can be swivelled ±10°, enabling angular machining and increased versatility. Feeds along the X- and Y-axes are adjustable in the range of 0.2 to 2.4 mm per double stroke, while the rotary feed of the table can be set from 0.1 to 1.4°, ensuring precise control of cutting parameters. The maximum permissible table load is 3000 kg, making the machine suitable for large and heavy components. The distance from the table surface to the chisel guides is 500 mm, and the machine offers generous table travels: 650 mm longitudinal, 500 mm transverse, with 360° table rotation. The drive motor has a power rating of 10 kW, providing sufficient cutting force for demanding machining tasks. With overall dimensions of approximately 2650 × 1810 × 2890 mm and a total weight of about 5200 kg, the STANKO 7M430 features a rigid cast-iron construction that ensures excellent vibration damping and long-term stability. Condition: *Used machine Rsdpfx Aex U Tr Aobdon *Ready for operation *Fully functional *Operating hours: approx. 24 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Slotting of internal keyways *Machining of internal splines *Profile machining of internal surfaces *Machining of large and heavy components *General mechanical engineering and repair work

Condition: good (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, spindle diameter: 110 mm, table length: 1,400 mm, table width: 1,600 mm, Bench drill Control Heidenhain 407 Rjdoq E Ryfspfx Abdjn

Condition: used, Year of construction: 1966, functionality: fully functional, Equipment: documentation/manual, Good morning, Rodpfexwp Ngsx Abdjn I am offering for sale a Stanko 5A250 bevel gear planer. The machine is in very good technical condition and comes complete with all devices for adjusting the knives and accessories. Price: 7,000 EUR Technical data: Maximum pitch circle diameter: - Ratio 10:1: 500 mm - Ratio 2:1: 450 mm - Ratio 1:1: 350 mm Module: 1.5 – 8 Maximum tooth length: 90 mm Number of gear teeth: 10 – 150 Number of tool speeds: 9 Range of double strokes of the cutter: 75 – 472 min⁻¹ Time required to cut one tooth: 8 – 123 sec. Power: - Main drive: 3 kW - Hydraulics: 2.2 kW - Cooling: 0.15 kW Machine dimensions: - Length: 2200 mm - Width: 1600 mm - Height: 1800 mm Weight: 8,700 kg

Condition: good (used), Maximum drilling diameter in steel 50 mm Minimum overhang (minimum distance of the spindle axis from the body) 450 mm Redpjttriwofx Abdjn Maximum overhang (max. distance of spindle axis from the body) 1600 mm Minimum spindle speed 20 1/min Maximum spindle speed 2000 1/min

Condition: excellent (used), Year of construction: 1961, Cylindrical Grinding Machine 3A164A Maximum workpiece diameter for mounting, mm: 400 Rjdpfx Aeya U Uzjbdon Maximum workpiece length for mounting, mm: 2800 (2920)

Condition: used, functionality: fully functional, total height: 1,715 mm, total width: 735 mm, total length: 1,475 mm, power: 3.3 kW (4.49 HP), overall weight: 3,300 kg, Forging hammer is in excellent condition and could be checked under power at any time. Nominal mass of drop parts, kg 75 Rsdpfsxwuv Ejx Abdon Impact energy, kj 1,4 Max number of blows per minute 210 Working zone daylight, mm 300 Die impression size, mm 130 x 63 Motor capacity, kW 3,3 Hammer dimensions, mm 1475 x 735 x 1715 Hammer weight with anvil block, kg 3300

Condition: ready for operation (used), Year of construction: 1982, operating hours: 120 h, functionality: fully functional, machine/vehicle number: 572, wheel width: 32 mm, helix angle: 45 °, type of input current: three-phase, workpiece weight (max.): 200 kg, stroke length: 160 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 280 rpm, grinding wheel speed: 1,920 rpm, grinding spindle motor power: 1,500 W, grinding wheel bore: 127 mm, grinding wheel diameter: 350 mm, overall weight: 8,000 kg, grinding wheel width: 32 mm, rotary table diameter: 280 mm, stroke adjustment: 160 mm, table diameter: 280 mm, table load: 200 kg, wheel diameter: 350 mm, Gear Grinding Machine Stanko 5M841 / 5A841 The Stanko 5M841 (5A841) is a heavy-duty gear grinding machine designed for precision finishing of cylindrical gears with straight and helical teeth. This machine is widely used in industrial gear production and is known for its robust construction, reliability, and long service life. Rsdpfx Absx I Ncdjdsn The machine is capable of grinding gears with helix angles up to ±45° and supports workpieces weighing up to 200 kg. Grinding is performed using disc-type grinding wheels with a diameter of 260–350 mm and a width of 16–32 mm, ensuring high accuracy and consistent surface quality. The grinding wheel spindle operates at 1920 rpm and is driven by a 1.5 kW motor. The reciprocating stroke of the grinding slide is infinitely adjustable from 20 to 160 mm, with a variable stroke rate of 50 to 280 double strokes per minute, allowing precise adaptation to different gear sizes and grinding conditions. The machine is equipped with a rotary work table (Ø 280 mm) and is designed for continuous industrial operation. Power supply is 3-phase, 380 V, 50 Hz. With an overall machine weight of approximately 8000 kg, the 5M841 offers excellent stability during grinding operations. Key Advantages: -Suitable for straight and helical gears -Helix angle up to ±45° -Heavy, rigid cast-iron construction -Infinitely adjustable grinding stroke -Reliable mechanical design, easy maintenance -Ideal for medium and heavy industrial applications Typical Applications: -Precision gear finishing -Gear manufacturing and refurbishment -Mechanical engineering and heavy industry

Condition: reconditioned (used), Year of construction: 1970, functionality: fully functional, Table size 800 x 200 mm Magnet table 600 x 200 mm Grinding capacity 630 x 200 mm Rodpfx Absw R Dnxjdon Max grinding high 320 mm Dia of grinding wheel max:250 mm Spindle speed 2750 rpm Power required 3,6 kW Weight 2200 kgs Dimensions L x W x H =: 1900 x 1500 x 2000 mm Dimensions of coolant tank L x W x H = 400 x 300 x 500 mm

Condition: good (used), Manufactured by: Stanko Tilt table Rsdsv S Ukvopfx Abdon Table size: 560 x 560 mm Design: 400 mm Maximum cutting height: 240 mm Belt length: 3150 mm Adjustable speed

Condition: good (used), Year of construction: 1989, functionality: fully functional, total height: 18,700 mm, total width: 14,600 mm, total length: 35,350 mm, grinding length: 320 mm, grinding wheel diameter: 200 mm, Shaft and bore grinder. Prod. STANKO(USSR) - 1989. Diameter of the ground hole 50 - 300mm. Max. diameter of the workpiece 560mm. Distance between table and spindle 340mm. Maximum length of the workpiece 320mm. Upper diameter of the inner grinding head 125; 100; 80mm. Distance from the front face of the grinding head to the spindle flange 150 - 400mm. Rodpfx Ajtzwzxsbdon Size of grinding disc 200 x 75 x 63 mm. Workpiece spindle speed range 60 - 600 rpm. Table movement 800mm. Power of main motor 7,5 kW Total required power 14,63 kW Dimensions of the machine (Length x Width X Height) 3535 x 1460 x 1870 mm Weight of the machine 6400kg.

Condition: good (used), Year of construction: 1981, functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 750 mm, total width: 4,180 mm, total length: 13,440 mm, total height: 2,455 mm, grinding diameter: 800 mm, overall weight: 38,700 kg, STANKO 3M196 roller grinder. Year of manufacture 1981. Max. grinding diameter 800 mm, Max. length of ground workpiece 4000 mm, Range of grinding diameters 80 - 800 mm, Max. grinding diameter without support 800 mm, Max. grinding diameter in support 450 mm, Elevation of the tusk above the table 410 mm, Max. weight of ground workpiece in the tusk 10000 kg, Redot I Dppspfx Abdjn Grinding wheel dimensions ⌀750 x 100 mm, Grinding speed 50 m/s, Main motor power 30 kW, Product speed 5 - 80 rpm, Max. travel of tailstock tusk pins 100 mm, Overall dimensions of the grinder (Length x Width x Height ): 13440 × 4180 × 2455 mm, Weight of the grinder 38700 kg,

Condition: good (used), Year of construction: 1973, functionality: fully functional, total height: 3,760 mm, pressing force: 1,250 t, total length: 6,400 mm, total width: 4,365 mm, table length: 820 mm, operating pressure: 7 bar, table width: 260 mm, throat depth: 700 mm, overall weight: 135,000 kg, pressure: 7 bar, stroke length: 220 mm, Upset slide nominal force: 12 500 kN /1 250 ton/ Maximal diameter of work piece: 140 mm Maximal diameter of upset flange: 180 mm Upset slide stroke: 460 mm Slide continuous idle strokes in minute: 35 Electric motor power: 75 kW Overall dimensions: - L-R: 6 400 mm - F-B: 4 3650 mm - Height: 3 760 mm Rodouby N Djpfx Abdon Total weight, circa: 135 000 kg.