Used Splash Wall for sale (6,445)

Condition: used, mileage: 239,000 km, power: 125 kW (169.95 HP), first registration: 05/2017, fuel type: diesel, overall weight: 3,000 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * Navigation system * Navigation pre-installation * Power steering * Partition wall * Central locking Speed control: Cruise control Dwsdpfx Aj Aiqb Nocyed Climate control: Air conditioning Safety: ABS * ESP Parking assistance: Rear Vehicle is in good condition with normal signs of use.

Condition: used, mileage: 198,000 km, power: 96 kW (130.52 HP), first registration: 12/2019, fuel type: diesel, overall weight: 3,500 kg, color: violet, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space volume: 11 m³, loading space length: 3,000 mm, loading space width: 1,900 mm, loading space height: 2,050 mm, Equipment: air conditioning, all wheel drive, central locking, had accident, soot filter, The vehicle has ENGINE DAMAGE!!! Equipment: Power steering * Partition wall * Central locking Air conditioning: Air conditioning system Safety: All-wheel drive Cooling system: Carrier Pulsor 500 Cargo area: L 3.00 x W 1.90 x H 2.05 meters Payload: 1,030 kg The vehicle has ENGINE DAMAGE!!! Dwedpfs Aiqdnsx Acysd

Condition: used, mileage: 149,200 km, power: 130 kW (176.75 HP), first registration: 11/2017, overall weight: 7,490 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro6, loading space width: 2,350 mm, loading space length: 3,850 mm, loading space height: 400 mm, Year of construction: 2017, number of seats: 2, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), parking heater, * Loading crane: * Manufacturer: ATLAS * Type: 65.2-A2 Year of manufacture: 11/2017 * 2 hydraulically extendable boom sections, max. 6.4 m * Max crane reach: 6.4 m - 900 kg * Max lifting capacity: 1700 kg * Loading crane features: radio remote control incl. charger and 2 batteries * Manual crane operation from the right side behind the cab * Slewing servo and grapple control * Hydraulically extendable outrigger supports (horizontal) * Toolbox on the frame, rear right * Meiller pump, 7 pistons * Meiller three-way tipper, year 2017 * Access steps on tipper body * Lashing recesses in tipper bed * Ball-type tow hitch, 3.5 t * Maulkupplung (Ringfeder G135) with 40 mm bolt * Permissible trailer load: 10,500 kg * Trailer brake system * 24V 15-pin trailer socket * 12V 13-pin trailer socket * Right-side turn assist camera * 2 seats * Air-suspended driver's seat * Seat heating * Air conditioning * Additional warm air heater * External sun visor * Rotating beacons right and left on the roof * Warning LED flashers in the radiator grille * Work lights: right side, rear, and at crane * Storage box on engine tunnel * Cruise control * Electric windows and mirrors * Daytime running lights * Main fuel tank: 120 liters * AdBlue tank: 25 liters * Protective cap for AdBlue dosing system * Roof hatch/ventilation flap * Brake system with ABS and ASR * ESP electronic stability program * Comfort radio-CD with AUX/MIC/USB and BLUETOOTH (smartphone connectivity possible) * Coat hooks on rear wall * Tachograph * BlueTec 6 * EURO 6 emission standard * Single PTO (power take-off) * Rear axle differential lock * Disc brakes * Leaf suspension * Rear cab window * Power steering * Pneumatic steering wheel adjustment * Condensation monitor for compressed air system * Rear axle stabilizer * S-Cab, ClassicSpace 2.30 m, tunnel version Djdpfeyn Tgfjx Acyswd * Mudguards with splash protection * Axle ratio I = 3.154 * Outside temperature display * Side protection device * Pollen filter * Vehicle from municipal service * ...and much more.

Condition: used, mileage: 149,200 km, power: 130 kW (176.75 HP), first registration: 11/2017, overall weight: 7,490 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro6, loading space width: 2,350 mm, loading space length: 3,850 mm, loading space height: 400 mm, Year of construction: 2017, number of seats: 2, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), parking heater, * Loading crane: * Manufacturer: ATLAS * Type: 65.2-A2, year of manufacture: 11/2017 * 2 hydraulically extendable booms, max. 6.4 m * Maximum crane reach: 6.4 m – 900 kg * Maximum lifting capacity: 1,700 kg * Loading crane equipment: radio remote control with charger and 2 batteries * Manual crane operation from the right side behind the cab * Slew servo and grab control * Hydraulically, horizontally extendable outriggers * Storage box on the right rear chassis * Meiller 7-piston pump * Meiller 3-way tipper, year of manufacture 2017 * Access steps at tipping bridge * Lashing pockets in the tipper floor * Ball head trailer coupling, 3.5 t * Ringfeder G135 drawbar coupling with 40 mm pin * Towing capacity: 10,500 kg * Trailer brake system * 24V 15-pin trailer socket * 12V 13-pin trailer socket * Right-side turn-assist camera * 2 seats * Driver’s seat, air-suspended * Seat heating * Auxiliary hot air heater * Air conditioning * Exterior sun visor * Rotating beacons left and right on roof * Warning LED strobe in the radiator grille * Work lights right side, at rear, and on crane * Storage box on engine tunnel * Cruise control * Electric windows and mirrors * Daytime running lights * Main fuel tank: 120 l * AdBlue tank: 25 l * Protective cap for AdBlue dosing system * Roof hatch / roof ventilation flap * Brake system with ABS and ASR * Electronic Stability Program (ESP) * Comfort radio-CD with AUX/MIC/USB and BLUETOOTH (smartphone pairing possible) * Coat hook on rear wall * Tachograph * BlueTec 6 * EURO 6 emission standard * Single PTO * Rear axle differential lock * Disc brakes * Leaf-sprung suspension * Rear window in cab Dwsdpfeyn Tgxox Acyed * Power steering * Pneumatically adjustable steering wheel * Condensate monitoring for compressed air system * Rear axle stabilizer * S-Cab ClassicSpace, 2.30m tunnel * Mudguards with splash protection * Axle ratio I = 3.154 * Outside temperature display * Side underrun protection * Pollen filter * Vehicle from municipal operation * and much more.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,520 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis: Central axle trailer, low loader Fine-grained steel welded construction Gear-supported front support Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels with anti-splash flaps only on the last axle Aluminum side impact protection Front crossbar that can be inserted into the floor holes Coupling device for central axle trailer Dedozcnugjpfx Acyjwd Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (linkage compensation) Wheels and tires 235 / 75 R 17.5" as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Parking sockets for electrical wiring, ABS/EBS and air connection to the drawbar 24 Volt EBS, Electronic Braking System with EBS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side coupled with the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED Premium LED side marker lights, with "20 LED diodes per light" 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS low-lying steel tub, platform floor made of steel/non-slip metal plate, steel walls firmly welded to the floor Platform length 5500 mm Tub with "Load-Lock profile" at the front and on the side for attaching lashing straps (8 pieces at the front, 16 pieces on each side) 2 pairs of lashing rings, 1 x at the front in the corners of the steel tub and 1 x at the rear in the floor, each 5 tons 3 pairs of additional lashing rings in the floor, each 5 tons 4 pairs of lashing rings screwed onto the side walls Ramps Steel ramps, 2,300 mm long, 510 mm wide, can be shifted sideways with handrail on the ramps covered with wood (tip area with steel/non-slip metal plate) with gas spring for single-person operation Rear wall / rear corner posts Screen-printed panel, 400 mm high, pluggable, between ramps Operating instructions The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Country of registration / signs Country of registration: Germany Type approval according to EG 2007/46 prepared for license plate holder, single-line Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning sign according to ECE - 70 Custom-made transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,900 kg, maximum load weight: 8,900 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, total length: 8,000 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center-axle trailer Fine-grained steel welded construction Outer frame slightly angled, new design with "Load-Lock profile" for tie-down straps 3 pairs of lashing eyes outside in the floor, each 5 tons 1 at the front in the corners, 1 in front of and 1 in the rear incline at the back 6 pairs of lashing eyes outside in the floor/outer frame, each 5 tons Gearbox support leg at the front Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection, galvanized Splash guards at the rear covering the entire width (not in combination with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Coupling device: Center-axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking System 2-line compressed air brake system Color-coded line routing for easy servicing Hand-spindle parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle 24 volt ABS and ALB, with ABS connector at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and Tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front, in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable Floor Steel/diamond plate floor for high point load capacity Note: Slight floor waviness due to welding distortion is possible! Platform length approx. 6,200 mm Rear incline to approx. 900 mm Front wall / corner posts at the front 25 mm aluminum hollow profile, 400 mm high Side walls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / corner posts at the rear 1 pair of steel uprights attached to the frame, with brackets for locking the access ramps, access width approx. 2,430 mm Access Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally movable With handrail on the ramps Dwjdszcqpaspfx Acyjd Covered with wood (tip area with steel/diamond plate) With gas spring for one-person operation Operating Instructions The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and following behavior possible due to incorrect load distribution) Country of Registration / Signs Germany With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rusting" Front wall Aluminum Side wall Aluminum, anodized Access ramps Hot-dip galvanized Customized Transport Solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Dwodpszcv Stjfx Acyod Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Dwedpfx Acjza A Txjyod Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Dwjdpfsfzrapjx Acyed ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Dwedpfx Acjfz Ax Ssyjd • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Dodpefz A D Njfx Acyowd ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Dwjdpfxef Aaalo Acyed The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, mileage: 539,800 km, power: 315 kW (428.28 HP), first registration: 08/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Special equipment: Meiller RS21.70 roll-off tipper * Central lubrication system * Extendable underride guard * Power box * Stainless steel storage box * Rotating beacons * Steered, liftable, relieving trailing axle * Wheelbase 4900 mm * Engine-dependent PTO, rear output * Payload 14400 kg * Additional Duomatic brake connection * D40 trailer hitch * Rear view camera * Navigation system * 1 lower bed * Preparation for upper comfort bed * Auxiliary air conditioning * Hot water auxiliary heating * Euro 6c emissions standard * Active Brake Assist * Attention Assist * Lane Keeping Assist * Stability Control Assist * Refrigerator---- * Lockable storage compartment above the windshield * Front axle load 8.0 t * Ambient LED lighting * Work lights * Work lights on the upper rear wall of the cab * Bluetooth Comfort audio navigation system * Downward exhaust right, * Right exterior mirror with maneuvering position, * Standard and DuoMatic brake connection, * CB radio, * Driver's cab: width 2.50 m, * Suspension: 8.0 t front springs, 3 leaves, * Fire extinguisher, * Tinted windshield, * 10.4 cm information display, * Folding table in the parapet, * Automatic climate control, * 3-part fender, * Fuel tank: 390 L aluminum, * Cooler/refrigerator, * Roof air deflector (lockable, without base panel), * Steered trailing axle, liftable, * Parameterizable special module, * Frame lowering without bellows residual pressure control, * Reinforced end cross member, * Drawers under the parapet, * Circuit breaker, * Seats in the driver's cab: Comfort suspension seat, * Exterior sun visor, * Storage compartment on the left under the driver's cab, * 12V socket in the Passenger footwell, * Additional thermal insulation Other equipment: * Axle configuration: 6x2/4 * Actros 4, * 2-wire trailer brake, connections on the left, * 24V / 15-pin trailer socket, * Electric exterior mirrors. Adjustable and heated, * Rear axle differential lock, * Driver assistance system: Attention Assist (drowsiness detection sensor), * Driver assistance system: Active Brake Assist, * Driver assistance system: Lane Keeping Assist, * Driver cab: L StreamSpace, * Driver cab: steel suspension, comfort, * Suspension: leaf/air, * Electric windows, * 100 A generator, * 12-speed transmission - type: G 211-12, Power Shift * Urea tank (AdBlue): 60 liters, * Comfort locking system, * Communication interface, * Radiator shutter, * 2-stage air compressor, * Engine 10.7 liters - 315 kW R6 Diesel (OM 470), * Engine brake, * Engine compartment enclosure, * Trailing axle Single tires, * Ramp mirror, * Disc brakes on front and rear axles, * Seat cover/upholstery: fabric, * Seats in driver's cab: passenger seat, * Seats in driver's cab: foldable driver's seat backrest, * Voltage converter 24V / 12V 10A, * Front splash guard, * Front axle stabilizer, * Rear axle stabilizer / trailing axle, * Outside left storage flap, * 24V cab socket, * Tachograph / EC control unit, * Door extension for driver's cab, Dsdpfxjr Edy Uo Acyewd * Aerodynamically shaped underbody paneling, * Front underride protection, * Toll collection preparation, * Offset front axle, * Regulated water pump, * Gross vehicle weight 26.00 t, * and much more. !!! Errors, changes, and prior sale reserved!!!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension Dodpfx Acoy Rrplsyowd SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: used, maximum load weight: 13,330 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space length: 6,150 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, Year of construction: 2026, Equipment: ABS, - 2 steerable axle sets ECO/low-maintenance with disc brakes, each with a load capacity of 9,000 kg - Dual-circuit EBS pneumatic braking system according to EC guidelines, with ALB control and parking brake as a spring-loaded accumulator, automatic linkage adjusters. Duomatic brake connection - Air suspension with raising and lowering function - Chassis: Stable welded construction made of high-strength fine-grained steel sheets, formed and welded to prevent twisting. The longitudinal and transverse beams form a single plane with the main frame. - Tires: 4 x 385/55 R22.5 on steel rims - Fixed drawbar with DIN towing eye 40 mm (length-adjustable drawbar) - Electrical system: According to StVZO guidelines, in a protected installation, 5-chamber tail lights integrated into the underrun protection, Euro plug, 15-pin socket, 2 red position lights above the rear portal. ABS with connection cable. 1 marker light mounted on each side of the rear frame. Dwjdpfozp Ak Uex Acyod - Floor: Made of 24 mm thick vehicle construction panels, film-coated underneath to prevent moisture penetration, with a non-slip screen-printed texture on top, laid flat and sealed around the edges. - Front wall: Made of special vehicle construction plastic panels, closed up to the roof, with a central strut laid flat. Without a front wall cover at the top front. - Side walls: ZIKUN flap swivel mechanism, continuous sideboard, horizontally divided. By folding down the lower sideboard, the upper wall is mechanically swung onto the roof. The lever kinematics, supported by a spring pull, is attached to the front wall. Sideboard upper parts made of special aluminum composite panels, 25 mm. - Fixed roof consisting of steel stringers with permanently glued aluminum sheets, powder-coated in white RAL9010 on the outside - Steel impact rail welded on both sides as a forklift protection. Rubber impact buffer mounted at the rear under the rear door - PVC quarter fenders on the axles - 1 set of mud flaps for the fenders - 2 wheel chocks with holder - Lateral underrun protection, galvanized and foldable brackets, aluminum planks with rounded end pieces - Continuous splash guard under the underrun protection at the rear - Complete body sandblasted, primed and painted in a single color - Chassis: MAN graphite black - Outer frame and body: RAL 9010 pure white - Inspection 60001-0002 TÜV approval trailer/semi-trailer - Drawbar fork length-adjustable - Central lubrication strip for slewing ring and drawbar - 2-leaf rear door made of aluminum sandwich panels with internal rotating bar locks. The doors have a smooth surface - Clad the front wall in the lower area with a 280 mm high aluminum profile as impact protection. - 2 x retractable access steps in the lower part of the folding wall on the left and right, approx. 600 mm long - Integrated cargo securing system with CRS system (4 rows) in the roof and floor, including 4 load securing bars with 6 horizontal spring telescopic rods (CRS system Ancra-Jungfalk, Dekra tested according to VDI 2700 Code XL) - Interior light as an LED spotlight, switched via parking lights, with a separate switch - Additional interior lighting as an LED spotlight mounted at the rear - 2 x pallet stopper on the left and right - Tire pressure monitoring system according to ECE R 141 - Additional camera on the trailer for rear view video system, camera at the rear above the rear door

Condition: new, empty load weight: 490 kg, maximum load weight: 810 kg, overall weight: 1,300 kg, loading space length: 3,100 mm, loading space width: 1,650 mm, loading space height: 1,950 mm, tire size: 185/70R13, Roadstar 400 tandem box trailer from Cheval Liberte / Debon. Attractive design, aerodynamic front, aluminum walls, aluminum floor and polyester roof are combined in this case. Hardly any other car trailer has such excellent handling as this one! The aluminum box trailer is equipped with the Pullman2 chassis, which was developed by Cheval Liberte itself. The low loading height of just 35 cm and the independent wheel suspension with trailing arm, coil spring and shock absorber to automotive standards ensure optimum driving characteristics. The flat drive-on angle is ideal for loading motorcycles and quad bikes. The drive-on ramp of the poly box trailer, which can also be opened as a door for easy loading of pallets and other goods, is outstanding. The extensive standard equipment of the car trailer includes a poly roof and poly front in one piece, aluminum walls, aluminum floor, side door, folding door system, 100km/h, interior light, automatic support wheel, lashing eyes, stable frame and a V-drawbar. Djderxu T Iepfx Acyewd Useful box trailer accessories such as motorcycle rocker, stand rail, motorcycle straps, lashing straps, rear supports and lashing eyes are also available. The body is splash-proof.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 13,650 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,638 mm, suspension: air, tire size: 235/75 R17,5", color: silver, The images are archive images! The vehicle may be in use! Chassis: Semi-trailer for transport companies Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin Suitable for transporting construction/agricultural machinery up to a maximum gross weight of 24,000 kg and with a maximum width of 2,480 mm (however, the track width of the construction/agricultural machinery or vehicles to be transported must not exceed 2,200 mm). Mounting rail for aluminum ramps at the rear (wider construction/agricultural machinery must not be loaded). Outer frame slightly angled, new design with "Load-Lock" profile for securing lashing straps. 14 pairs of lashing points recessed into the outer frame, 2.5 tons each. 6 pairs of lashing points recessed into the outer frame, 5 tons each. 24-ton, 2-speed support jacks, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1920 mm. Foldable rear support. 2 x chock blocks with holder. Aluminum side impact protection. Steel underride protection. Quarter panel fenders in front of and behind each axle. With anti-splash flaps behind each axle. 1 x spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 x spare wheel, same manufacturer as the standard tires, steel rim. Axles + Suspension SAF drum brake axles. "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, additionally electrically operated from the truck, including forced lowering and start-up assist, without truck installation (the start-up assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Braking System 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connecting line. 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (this requires the truck to have the necessary capabilities. Only for standard tires). Dedpfsxb D Swox Acyswd Wheels and Tires 235/75 R17.5 twin tires. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. Yellow LED lighting on the sides linked to the turn signal ("flashing side marker lights"). 2 white position lights at the front in LED. 2 white/red outline lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle loads up to a maximum of 5,600 kg. Front Wall / Corner Posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a robust design. Front wall additionally covered with sieve plate, 1250 mm high. Frame hot-dip galvanized. The images are archive images! The vehicle may be in use!

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,100 kg, Additional Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without edge reinforcement, the loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate at the bend as a cable guide - flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm Trailer hitch Trailer hitch ball head D24.8:, trailer load 2,800 kg, incl. mounting and electrical system with 7-pole socket Accessories/Conversions 2 holders for wheel chocks, aluminum side impact protection, foldable - to be taken over from the truck! Steel under-run protection, quarter-shell mudguards with mud flaps - to be taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 1 bracket for 3 x petrol cans 1 stainless steel storage box, w=600/h=400/d=500 mm, with a polished door, incl. lockable, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing collars on the back (splash-proof according to technical possibility) Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front panel switched via parking lights with a switch on the front panel, outside on the front left, 1 LED work light, at the rear, with integrated rear view camera Incl. with color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage converter 24/12V, 1 7-pole 12V socket = adapter plug Floor Mega Grip made of interlocking, galvanized grating, steel grating 50/4 Incl. with a mesh size of 50 mm. Top side with anti-slip interlocking, running continuously over the entire main frame platform Tie-down rings 12 pairs of tie-down rings in the outer frame, freely pivotable - 10 tons each. 1 x at the very front and the last one at the very back. 1 tie-down ring at the very back in the middle for attaching the winch cable 12 tie-down rings recessed in the middle of the floor, 5 tons each Front panel Front panel made of steel sheet, height 1,500 mm. Fixed with corner pillars at the height of the front wall. 2 x 12 lifting brackets for tie-down chains, mounted on the left and right on the front panel Winch Electric winch, 24 volts, pulling force approx. 6350 kg, mounted in the middle on the front panel, operated with a remote control, cable length min. 35 m x 9.5 mm, with cable window, with cable pressure plate, incl. overload protection, cable free-running coupling, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating instructions Ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair, electro-hydraulically foldable and laterally movable - incl. electro-hydraulic pump unit. Ramp angle approx. 8° with the rear axle lowered Ramp support made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 lashing straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Labeling of the ramp operation. Dwjdpfx Acoi Riyteysd Lowering brake valve for lowering the ramp Support Adjustable support legs, foldable at the rear + length adjustable,

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 28,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,045 mm, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, slightly sloping outer frame, new design with Load-Lock profile for securing lashing straps, 24-ton capacity, two-stage landing gear, single-side operation, with straight lower section, without horizontal load compensation. Note: Free support leg swivel angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door lock on the side, 2 wheel chocks with holder, Aluminum side impact protection, galvanized steel under-run protection, quarter panel fenders in front of and behind the axle assembly, with anti-splash flaps according to EG standard, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension. Two-line compressed air brake system, color-coded lines for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle – driving stability system. 385/65R22.5, manufacturer's choice, steel rims, factory silver. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, mounted on longitudinal supports for high point load capacity for forklift axle loads up to a maximum of 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a full-volume design, release device for side tarpaulin on the front wall, crash barrier, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side supports: 3 pairs of sliding supports that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket, 3 pairs of support positions. Insertion slats: 5 rows of wooden insertion slats. Rear wall/corner posts at the rear: Corner posts made of steel at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel latch locks each. Dodei Riy Tjpfx Acyowd Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning closures made of stainless steel. Roof: Sliding roof, rear lift that can be folded up, with the roof that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams, approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of the roof beam during loading and unloading, optimal rain strip at the rear, at the top of the rear crossbar, above the doors. Germany, test approval according to EG 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural integrity according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the co

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 3,950 kg, maximum load weight: 31,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,930 mm, suspension: air, tire size: 385/65r22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information: Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, cannot be uncoupled with load, in the uncoupled state, the vehicle must stand at an angle towards the rear. 2 chock blocks + holder Underrun protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones with anti-splash flaps on the last axle 1 tarpaulin rod + holder 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle automatic lift axle, incl. forced lowering and start-up assist, operated 3x by braking (start-up assist functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: Trailer may only be pulled by towing vehicles that guarantee the effectiveness of ABS! with lifting and lowering valve Vehicle driving stability system Automatic tilting lowering with shut-off valve Wheels & tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front Dwodpfsi Ri R Iex Acyjd 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part NW 48 mm. Actuation via truck auxiliary drive Tipping body Aluminum box body, sloping front wall 5 mm thick, 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents bulk material from spilling. Inside with ladder on the front wall. Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipping body shape Membrane - rear wall Rear wall as a hinged flap with double hinge, externally mounted with a double hook lock. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large clearance for best possible operation. Roller cover on one side for storage on the right, with central locking on the left. Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod, so that it is not attacked by the material and does not rust. The stated total weight is technically possible, but depending on the load, the total weight may not be reached while observing the permissible axle/support and kingpin loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of approval/signage Germany Type approval according to EC 2007/46 24/7 service hotline prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the sides and red at the

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Dwsdpfx Aolrqiqscysd Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: new, empty load weight: 980 kg, maximum load weight: 2,520 kg, overall weight: 3,500 kg, loading space length: 4,350 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, tire size: 185r14c, Product information "Cheval Liberte Roadstar C800 3500kg 435x200x200cm box trailer" NEW box trailer C800 from Cheval Liberte / Debon. Large volume, appealing design, aerodynamic front, aluminum walls, aluminum floor, and a polyester roof are combined in this box trailer. Few car trailers offer such excellent driving performance as this one! The aluminum box trailer is equipped with the Pullman2 chassis, a proprietary development from Cheval Liberte. A low loading height of just 35cm, single-wheel suspension with longitudinal arms, coil spring, and shock absorbers according to automotive standards ensure optimal driving characteristics. The shallow loading angle is ideal for loading motorcycles and ATVs. The loading ramp on this poly box trailer is also outstanding. It can also be opened as a door to easily load pallets and other goods. The extensive standard equipment on the car trailer includes a one-piece poly roof with a poly front, aluminum walls, aluminum floor, side door, flap door system, 100km/h rating, interior light, automatic jockey wheel, lashing eyes, maneuvering handle, sturdy frame, and a V-shaped drawbar. Dimensions: Loading width approx.: 178cm, loading height approx.: 181cm, loading width between the wheel arches (narrowest point) approx.: 190cm We offer accessories for box trailers at affordable prices, such as a motorcycle ramp, support rail, motorcycle straps, lashing rails, lashing straps, rear supports, and lashing eyes. Dwedsiu Tlvspfx Acyod The body is splash-proof.

Condition: new, empty load weight: 460 kg, maximum load weight: 840 kg, overall weight: 1,300 kg, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 1,950 mm, tire size: 165r13c, Roadstar C300 box trailer from the manufacturer Cheval Liberte / Debon. Aesthetically pleasing and aerodynamic box with aluminum walls, a polyester roof, and front, available in various colors. The handling of this car trailer is outstanding. The aluminum box is equipped with the Pullman2 chassis, which is manufactured in-house by Cheval Liberte. The low loading height of only 35 cm ensures a low center of gravity, and the independent wheel suspension with longitudinal arms, coil springs, and shock absorbers, meeting automotive standards, provides optimal driving characteristics. The low loading height offers a shallow approach angle for loading motorcycles and ATVs. The ramp of the poly box trailer can also be opened as a door to load pallets and other goods. The equipment of the car trailer includes a one-piece poly roof and poly front, side door, ramp-door system, 100 km/h rating, rear supports, interior light, support wheel, lashing eyes, a sturdy frame, and a V-drawbar. We also offer useful trailer accessories such as a motorcycle ramp, motorcycle stand rail, motorcycle straps, lashing straps, and additional lashing eyes. The body is splash-proof. --- You can find all our cost-effective offers on our website. Germany-wide delivery possible (except islands)! Please ask us for the corresponding prices. --- Car Trailer Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Collection times: Monday - Friday – from [time] Dwjdpfxjfkc Hcj Acyed Collection is not possible on Saturdays!

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm Djdpfx Acov Ab Dqjyewd - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: new, empty load weight: 780 kg, maximum load weight: 1,220 kg, overall weight: 2,000 kg, 2-horse trailer with saddle room from Cheval Liberte model GOLD-ORIGINS. Beautiful design, aerodynamic, various poly colors, aluminum walls and aluminum floor. The ramp/door system allows pallets and horses to be loaded stress-free and without injury and the interior is easier to clean. This means that the horse cannot slip off the flap and the risk of injury is significantly lower. Dodpfov A Tuhsx Acyjwd The two-horse trailer is equipped with a rubber spring axle, saddle room, polyester hood, aluminum walls, aluminum floor, entry door, flap door system, interior light, automatic support wheel, stable frame, V-drawbar and so on. Horse trailer accessories such as tie-down brackets, 100 km/h, feed bucket, weather protection hood, drawbar protection, trailer lock, aluminum rims and scratching mats. The structure is splash-proof.