Box

Cheval Liberté Roadstar C800 3500kg 435x200x200cm Koffe

Condition: excellent (used), Shipping EU 300euro Lsdpel Sklgofx Aa Ejak

Condition: used, mileage: 31,325 km, power: 115 kW (156.36 HP), first registration: 07/1992, overall weight: 10,500 kg, fuel type: diesel, color: orange, tire size: 12,5 r20 mpt, gearing type: mechanical, machine/vehicle number: 3765, Equipment: all wheel drive, crane, differential lock, hydraulics, 1 branded UNIMOG 1650 with Hiab 120 loading crane Internal number: 3765 First registration: 04/92 Completed. Operating hours: approx. 219.8 Completed. KM status: approx. 31,325 Power: 115 kW/ 156 PS Gross vehicle weight: 10,500 kg Power take-off below Hydraulics 2-celled Ljdsfh Nbcopfx Aa Eeak Electric 24 V Tires 12.5 R20 MPT Loading crane Hiab 120 4 x hydraulically extendable, radio remote control Load values: 2.0 m - 4,400 kg 10.1 m - 850 kg 4.6 m - 2,130 kg 11.9 m - 700 kg 8.2 m - 1,080 kg The very low crane frame ensures that the UNIMOG is very stable and therefore has very high load values on the crane. The offer is subject to change, errors and prior sale reserved!

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface Ljdpon N Ekcjfx Aa Ejak - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Lg.No. 22621 Technical data: - max. working length 3500 mm - column passage 3050 mm Ljdeip Nikopfx Aa Eoak - max pressing force 2000 kN - max distance table / ram 480 mm - column throat 260 mm - ram stroke approx. 300 mm - Stroke speeds - downward speed idle max. 100 mm/sec - Upward speed 80 mm/sec - Downward press speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - weight approx. 16000 kg - with: - CNC - control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. tool clamping - upper tool + universal die tool - material supports - two-hand control panel

Condition: new, machine/vehicle number: Cheval Liberté Debon Cargo Seitentür farbig, empty load weight: 445 kg, maximum load weight: 855 kg, overall weight: 1,300 kg, loading space length: 3,000 mm, loading space width: 1,520 mm, loading space height: 1,650 mm, Built-in accessories - Colored (selectable: black, grey, green, blue) - white also available, but cheaper - Side door Superstructure - Reinforced polyester construction - Choice of polyester colors: black, green, grey, blue and white - Rear can be opened as a ramp or door - Side door, double lockable - Rounded polyester front Drive-on flap - Aluminum ramp with anti-slip ribbing - Can be secured with a padlock - Optimized loading angle of the ramp by lowering the chassis - Gas pressure damper, lowering and lifting aid Chassis and frame - Towing ball coupling with safety indicator - Chassis completely welded and fully galvanized - V-drawbar - Automatic support wheel with maneuvering handle Loading area and floor - Continuous, anti-slip and waterproof screen-printed wooden floor - 15 mm thick Lighting equipment - Modern multifunctional lighting - with reversing light - with rear fog light - with marker lights - with interior lighting - 13-pin plug Wheels and axles - Shock absorbers for 100 km/h approval (DE) - flat Pullmann 2 chassis - Cooperation of galvanized steel articulated arms and coil springs - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - wheel chocks with bracket Lashing and securing options - 4 lashing points bolted to the floor Documents Ljdod Uv Iaopfx Aa Eoak - Incl. vehicle registration document (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) If promotions are available, you can find them on our homepage. I am not allowed to link directly to it, so just enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Laedpfx Aou Rptyea Esk Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer concerns the following set: (possibility to adjust device parameters or to purchase the vacuum lifter or jib crane separately) - Vacuum lifter for boards, suitable for handling MDF, laminated boards, raw boards, particle boards, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for handling boards - Actuator for rotation between vertical and horizontal positions - 6 suction cups Ø 200 mm - Frame allows for adjustment of suction cup positioning to match the material being handled - Beam length: 2500 mm - Each suction cup is equipped with a ball valve for individual deactivation - Integrated air pulse function to prevent material adhesion - Individual X and Y axis adjustment for each suction cup - Control from the operating console (control panel): - Power on/off for the generator - Vacuum engagement/release - Thumb-operated control of the electric hoist – raising/lowering the lifter - Pressure gauge - Pneumatic supply – equipped with vacuum generators - Lifting capacity: 400 kg Lajdpfsxln Drex Aa Eek - Device weight: 100 kg - CE certificate Stationary jib crane Technical data: • Column height: 4 m • Height under the jib: 3 m • Jib length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3 m/min • Colour: any RAL palette colour on request • Manual slewing • Manual trolley • Quadruple/double needle bearing on the jib arm for smooth rotation • Electric chain hoist • CE certificate INCLUDED IN THE PRICE: • Pillar jib crane • Electric hoist – single phase • Manual trolley • CE certification • Complete documentation Standard warranty: 12 months

Condition: used, Year of construction: 2018, 5.5 kW main motor, frequency converter (2000-6000 rpm), motorized 2-axis scoring unit with its own drive. Motorized height adjustment in 0.1 mm increments. Motorized angle adjustment in 0.1° increments with digital display. 1090 x 630 mm miter gauge. Narrow and wide extraction hoods with quick-change function. Clamping shoe, sliding block, and manual quick-release clamp. Sliding carriage length 2150 mm (cutting length 2170 mm) - Quick-Scoring equipment packages - Scoring unit adjustable without tools from 2.8 to 3.6 mm - Miter gauge +45° - 45° - On/off switch on the sliding carriage. Lasdpfsvvkm Ujx Aa Ejk Storage location: Nattheim

Year of construction: 1986, condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm Ledog A Rgfjpfx Aa Ejak - mitre adjustment left + right 0 - 90 ° - cutting speed 1750 / 3500 m/min - feed speed of the saw blade 0 - 3 m/min - rapid return 3000 mm/min - Saw drive 400 V / 3,7 / 4,4 kW - 2 pieces pneum. Material clamping vices with adjustable clamping pressure - space requirement approx. W 1200 x H 1900 x D 1200 mm - weight approx. 600 kg

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Lasdpswwtw Dofx Aa Ejk Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request