Used Solvent Recovery for sale (1,032)

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg Dcedpfxjyv Iqvs Aqvsp This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Dedoygu Smopfx Aqvjcp Length:16000mm Width:6000mm Height:6000mm

Condition: used, Chromatography system – Teledyne Isco CombiFlash Companion/TS Flash The CombiFlash Companion personal flash chromatography system can be controlled and monitored from anywhere with any internet connection and Microsoft Windows® Explorer. It even notifies you via email as soon as the separation is complete. The system’s advanced automation and communication features provide maximum productivity and peace of mind, allowing you to focus on other tasks while purification is in progress. The system is controlled locally via a user-friendly touchscreen. The optional solvent management module controls up to four solvents online and monitors their levels, ensuring you never run out of solvent. The Companion uses precision-packed RediSep® Rf columns to obtain more pure material in less time than with glass columns or other disposable columns. Columns from 4 g to 330 g can be quickly exchanged without additional hardware – for easy and fast scaling from milligrams to tens of grams of purified sample. Dcedoyk Enajpfx Aqvep The CombiFlash Companion automatically recognizes the column size and programs itself with the optimal conditions for that column. To start the run, simply press “Play”. Since the software is specifically designed for purification and not for analysis, you can change method parameters in real time. To adjust the gradient during a run, simply click on a point in the gradient profile and drag it to the desired value to immediately modify the solvent mixture. Power supply: 100/117 V AC, 50/60 Hz; 234 V AC, 50/60 Hz, Dimensions: W x H x D 540 x 490 x 490 mm Weight: 27.2 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, mileage: 369,845 km, power: 210 kW (285.52 HP), first registration: 04/2016, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: red, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,200 mm, loading space volume: 29 m³, loading space length: 6,242 mm, loading space width: 2,403 mm, loading space height: 1,998 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, * On-board computer with multi-function steering wheel * Parrot hands-free car phone system Dedpfx Aqeymv Nmovecp * Rear-view camera with external monitor * Air conditioning * Navigation system with traffic information * Cruise control ----* Distance control assistant * Lane keeping assist * Emergency braking assistant * Hill start assist * Tire pressure monitoring system * Differential lock, rear axle * Ball hitch ----1st floor, Köstner livestock body * Hydraulic ramp * Feed flap, ventilation flaps * 2 partition gates * Loading area: 14.60 m² * Loading space height: 190 cm * Ball hitch---- * Tire dimension, front axle: 285/70 R19.5 * Tire dimension, rear axle: 285/70 R19.5 * Technically permissible total weight: 16,000 kg * Tare weight: 6,895 kg * Permissible trailer load: 3,500 kg * Overall length: 8,222 mm * Wheelbase: 4,500 mm ----Vehicle number: 11515----Errors and prior sale are subject to change----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recoveries and vehicle transport. ----YOUR VTS TEAM

Condition: used, Year of construction: 2008, // Equipment dismantled and stored in our warehouse // Manufacturer: Larox / Pannevis (Larox B.V.) Model: RT®/FT 1.15 x 5.6 m Type: Vacuum belt filter Year: 2008 (1988 version refurbished) Application: Liquid/solid separation, with cake drying and filtrate recovery. FT = Fume-Tight> Materials: stainless steel Filter area: 6.4 m² Cake cleaning: – Option to perform several washing stages, with each filtrate collected in its own receiver (purity up to 99.99% or more) with low washing water consumption. – Backwashing Repositioning of the tray and support grids at each retraction Operation/power supply: continuous Continuously washed filter cloth Cloth orientation and tensioner Extraction screw Skid with 3 filtration tanks and circulation pumps Vacuum pump skid: – Sihi Sterling LPHA 70123 (Atex) – Liquid ring: ethanol – 855 m³/h – 21.83 KW – Heat exchanger – Recirculation pump – Separator tank Main machine weight: 3000 kg Main machine length: 913 cm Djdpfx Aqsx R D D Ijvjcp Full technical documentation (paper and digital versions) Electrical cabinet

Condition: used, Manufacturer: Ernens Materials: Stainless steel. Nature of the cleaning fluid: liquid / water – Capacity: example with sultanas 600 to 800 kg/h – Feeding belt: 350 cm x 1500 mm – 2 compartment bowl 600 x 900 x 600 mm including : 1 inclined screw for product recovery d.150 mm 1 screw + horizontal draining drum d.300 mm Dodpfx Asx Rz Rlsqvscp – Heating by external recycling of the fluid

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,181 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, warranty duration: 6 months, input voltage: 24 V, total width: 510 mm, water tank capacity: 42 l, battery voltage: 24 V, battery capacity: 105 Ah, brushing unit diameter: 510 mm, year of last overhaul: 2026, empty load weight: 185 kg, operation weight: 230 kg, Hako Scrubmaster B45 CL TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and a new DGUV V3 electrical inspection with test certificate. Working width without squeegee: 51 cm Dcjdsyanpfjpfx Aqvep Working width with squeegee: 86 cm Max. area performance: 2,700 m²/h Fresh water tank: 45 L Recovery tank: 45 L Drive: Yes Drive type: Electric 24V Battery: 2 x 12V 105 Ah GEL batteries Installed new parts / performed repairs: - Suction motor 24V 400W (new) - 2 x 12V 105 Ah GEL batteries (new) - Brush deck / brush motors reconditioned incl. new ball bearings, carbon brushes, and bumper bar - All hoses replaced (new) - Disc brushes (new) - ACLA rubber wheels (new) - Squeegee rubbers (new) - Fresh water filter (new) In addition, we offer: Service, repair, and sales for all common Hako models.

Condition: used, mileage: 552,616 km, power: 346 kW (470.43 HP), first registration: 02/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 46 m³, loading space length: 6,110 mm, loading space width: 2,470 mm, loading space height: 3,050 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab Type: GX (wide, long, extra high) * Cab suspension: Comfort * Roof spoiler: Transport position upon delivery * Glass sunroof: Electric * Windshield: Laminated safety glass (VSG), tinted * Sun visor: Electric (windshield), mechanical (door side windows) * Electric auxiliary heater * Climatronic * Water auxiliary heater (4 kW) * Sleeping area: Upper and lower bunks with slatted frame and 70 mm mattress * Interior color: Moon Grey * Interior equipment: Carpet on engine tunnel, additional acoustic cab insulation, all-around curtain, storage compartments, refrigerator, dustbin ----Infotainment MAN Media System Advanced 7 inch Professional * DAB+/Navigation/Bluetooth/Radio/Traffic/MAP * Europe SD * Onboard computer with multifunction steering wheel * Control: MAN SmartSelect with touchpad and direct access buttons * Sound system: MAN Sound System * Smartphone integration: Yes * RIO Connectivity Board module ----Engine and Transmission Engine: Diesel engine MAN D2676 LF79, 346 kW (470 hp), 2,400 Nm torque, Euro 6d * Engine cooler: Standard length * Fuel filter: Heated, for fuels up to purity class 21 * Transmission: MAN TipMatic 12.28 OD, with retarder 35 Dcjdpfx Aey Dzgasqvop * Driving programs: MAN TipMatic Efficiency Plus, without kickdown function * Transmission functions: MAN EfficientRoll, MAN Idle Speed Driving ----Chassis and Axles Drive type: 4x2 * Front axle: 8,500 kg, non-driven, steered, not liftable * Rear axle: 13,000 kg, HY axle without drive, straight, not steered, not liftable * Suspension: Air/Air (LL) * High-load roll stabilization for rear axle ----Assistance systems * Electronic Stability Program (ESP) * Anti-slip regulation (ASR) * Emergency Brake Assist EBA (cannot be deactivated) * Lane Departure Warning (LDW) * Turning assistant * Driving comfort: * Adaptive Cruise Control ACC Stop and Go, distance-controlled * ECO modes for speed control * Cruise control function MAN EfficientCruise, terrain-dependent ----* H&W Curtainsider body CODEXL `MEGA` * Sliding tarpaulin on both sides * Fifth wheel coupling * Differential lock rear axle * Storage boxes ----* Tire dimension front axle: 355/50R22.5, steel * Tire dimension rear axle: 295/60R22.5, steel * Fuel tank: 780 liters * AdBlue tank: 60 liters * Technical gross weight: 20,500 kg * Unladen weight: 9,750 kg * Permissible trailer load: 24,000 kg * Overall length: 8,905 mm * Wheelbase: 4,800 mm ----Vehicle number: 11999----TWO MORE UNITS AVAILABLE!! Vehicle No.: 11998 = 683,780 km Vehicle No.: 11997 = 682,359 km----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: ----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arranging financing, applying for export license plates, vehicle delivery, vehicle registration, recovery and vehicle transport----YOUR VTS TEAM

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Technical Specifications: - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW - Dedusting Unit: - Type DUST – EX 603 - Equipped with: - Bag filter - Dust drawer - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg Dcsdpfxeyap Ico Aqvjp

Condition: used, mileage: 858,979 km, power: 265 kW (360.30 HP), first registration: 09/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, * Navigation system * Auxiliary heater * 2 sleeping berths * Multifunction steering wheel * Refrigerator ----* Retarder * Distance control cruise control * Lane keeping assist * Hill start assist ----* Differential lock, drive axle * Full air suspension Dcedpfovht Tzox Aqvep ----* Tire dimension, front axle: 355/55 R 22.5 * Tire dimension, rear axle: 295/55 R 22.5 * Fuel tank: 2 units * AdBlue tank: 1 unit * Technically permissible total weight: 19,000 kg * Unladen weight: 8,064 kg ----Vehicle number/Vehicle: 8340----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transportation ----YOUR VTS TEAM WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: used, mileage: 923,585 km, power: 265 kW (360.30 HP), first registration: 09/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * MAN Truck Advanced Media Radio * Navigation, Bluetooth, and hands-free system * On-board computer with multi-function steering wheel * Auxiliary heater ----* Distance control assistant * Emergency braking assistant * Lane keeping assistant * Hill start assistant ----* Air/air suspension * Retarder * Differential lock in rear axle WhatsApp support available! If you have any questions about the vehicle or need further information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp ----Vehicle number: 8845----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arrangement of financing * Application for export license plates * Vehicle relocation * Vehicle registration * Vehicle recovery and transport Dcjdpfxsvhvtqo Aqvop ----YOUR VTS TEAM

Condition: used, mileage: 769,700 km, power: 265 kW (360.30 HP), first registration: 09/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * MAN Truck Advanced Media Radio * Navigation, Bluetooth, and hands-free system * On-board computer with multi-function steering wheel * Auxiliary heater ----* Distance control assistant * Emergency braking assistant * Lane keeping assistant * Hill start assistant ----* Air/air suspension * Retarder * Rear axle differential lock WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp ----Vehicle number: 8504----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection Dcedpfjvhvvxex Aqvsp * Complete export handling * Arranging financing * Applying for export license plates * Vehicle relocation * Vehicle registration * Vehicle recovery and transport ----YOUR VTS TEAM

Condition: used, mileage: 204,915 km, power: 114 kW (155.00 HP), first registration: 12/2019, fuel type: diesel, wheelbase: 3,450 mm, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 14 m³, loading space length: 3,650 mm, loading space width: 2,000 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, central locking, cooling unit, cruise control, immobilizer system, onboard computer, power assisted steering, tail-lift, Special Features - 3 seats - Cruise control - Electric windows - Electrically adjustable, heated mirrors - On-board computer - CD radio - Airbag - Power steering - Central locking with remote control - ABS - ASR (traction control) - Twin rear wheels Body Deep-freeze body by CAZAUX - FRCX certified until 12/2025 - Internal dimensions: 3.65 x 2.00 x 1.94 (m) (L x W x H) Dcjdpfswtfkuex Aqvsp - Volume: 14.16 m³ - Side door - Partition wall - Interior lighting - Entry steps - Non-slip floor Carrier Pulsor 350 refrigeration unit: - Evaporator - Standby and night operation on 230V - While driving, the unit operates via its own diesel engine Tail lift Dhollandia DHLM.08 - Lifting capacity: 500 kg - Remote control For sale is an Iveco Daily 35C16 equipped with a high-quality refrigerated box body from the renowned French manufacturer Cazaux. The body impresses with robust construction, high-quality insulation, and well-thought-out functionality – ideal for professional refrigerated transport. The vehicle is equipped with a powerful Carrier Pulsor 350 refrigeration unit, specifically designed for the transport of deep-frozen goods. The Carrier Pulsor 350 is a reliable and efficient refrigeration unit for temperature-controlled transport, especially in deep-freeze applications. It offers: Electric standby mode (mains operation): Voltage / Phase / Frequency: 230 V / 1 phase / 50–60 Hz 400 V / 3 phases / 50–60 Hz Rated output: 4,500 W Refrigerant: Type: R-404A Airflow: 1,030 m³/h (measured according to AMCA 21085) Thanks to its high air circulation and rapid temperature recovery, the system is particularly suitable for use in urban distribution – even with frequent door openings. It ensures constant and reliable temperature control when transporting fresh and frozen goods. New TÜV inspection! Immediately available from our Langenfeld depot! ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles All vehicles we offer are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos taken directly at our premises – guaranteeing full transparency regarding the actual vehicle condition. Our vehicles undergo comprehensive preparation in our own specialist workshop before sale – including mechanical, bodywork, and paintwork inspections. They are thus optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA or KÜS – also as part of a remote inspection. Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export registration plates - Tailored financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment according to your requirements

Condition: new, Carbolite Gero AX30 Heating Cabinet *New price: €3185   The Apex AX series heating cabinets are economical laboratory devices for temperatures up to 250°C.   - Forced-air fan for short heating times and excellent temperature homogeneity - Stainless steel inner chamber - Two height-adjustable, chrome-plated shelves - Door with locking function and airtight silicone seal - Complies with safety standard BS EN 61010-2-010:2003   Maximum temperature 250°C Djdpfsq Hdfksx Aqvscp Minimum temperature RT + 30°C Volume (liters) 28 Temperature homogeneity (°C) ±5.0 @ 250°C Heating time (min) 23 Recovery time (min) 3 Dimensions: Internal H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per shelf/total 10/20 (kg) Air changes per hour 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24   Item condition: new, without original packaging   You can find more Carbolite Gero AX heating cabinets in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. Dcedpfow H Aw Ssx Aqvsp 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Dcjdpfx Aqjxbtvfjvsp Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi Dcodoxa Hx Rjpfx Aqvop █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: used, mileage: 217,600 km, power: 265 kW (360.30 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Service record available. ----Tipper body with Hiab Multilift Futura 12, lifting capacity 12,000 kg, remote control, hydraulic rear locking. ----* 12-speed automatic transmission * Air-sprung front axle * Front axle 8.0 t * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Trailer brake connection Duomatic * Wheelbase 4,000 mm * Driver's comfort air-suspended seat * Co-driver's comfort air-suspended seat * Air conditioning * Waste heat recovery * Hot water auxiliary heater, cab * Storage compartment, high, on engine tunnel * Roof hatch/ventilation flap, roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reversing warning system * ClassicSpace M cab, 2.30 m wide, engine tunnel 320 mm high * Cab rear wall, with window * External sun visor, transparent * Central locking system Dcjdpfoxbkd Hjx Aqvop * Comfort locking system * Mercedes PowerShift 3 * Seat heating for driver's seat * Air suspension, rear axle * Radio/navigation system Bluetooth, comfort * Axle load measuring device * Telematics pre-installation * Fuel tank 390 liters * AdBlue tank 60 liters * Rotating beacon, yellow, left and right * Engine OM470, R6, 10.7 L, 265 kW (360 hp), 1800 Nm * 2nd generation engine OM470 * Engine version Euro 6, with OBD-C * Engine brake * Fuel injection pump MB 131-2c * Trailer coupling standard D40, disc coupling * Stability control assistant (ESP) * Lane keeping assistant * Attention assist * Active Brake Assist * Turning assistant (Blind Spot Assist) * Cruise control * Weight variant 19.0 t (8.0/13.0) * Tool box * EBS * Auxiliary drive, single * Without spare wheel ----For sale to commercial businesses only! No guarantee for the accuracy of the information! Subject to prior sale! Our general terms and conditions apply exclusively! We will gladly provide you with a leasing or financing offer.

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: Dcsdpfx Asx Ah A Asqvsp - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: Dcjdpfx Aqjx Ap Hpovjp -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 09/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,626 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * MAN TGE Individual, Lions paint finish * Hill start assist * Exhaust system, EU6e (EC) * Preparation for trailer coupling * Towing eye, front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling to the side * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, left and right, convex, with integrated LED turn signal and wide-angle view * All-wheel drive 4x4 * Emergency brake assist * Battery 520 A (92 Ah) * Rubber floor covering in the cab * Electronic parking brake * ESP with electronic differential lock, anti-slip control (ASR) and ABS * Differential lock on the rear axle (can be manually engaged, mechanical) * Immobilizer, electronic * Park assist with parking sensors incl. side protection * Grab handles on the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with assistance lights and coming/leaving home function * Electrical connection block and KFG with ABH programming * Premium interior noise damping measures * With UNECE CS&SU * 4-cylinder diesel engine, 2.0L, Agg. 03N.G * ACC Stop & Go * 8-speed automatic transmission for 4x4 * Glove compartment with lockable flap, illuminated * Air conditioning system "Climatronic" in the cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assistant "Light Assist" * Leather multi-function steering wheel, heated with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Attention and fatigue detection * MAN SmartLink * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT * Fog lights incl. cornering lights * Navigation system (Baseline) * MAN Connect * 4 light alloy wheels 6 1/2 J x 17, with 1,200 kg load capacity, in black * MAN Media Van Navigation Business (12.9 inches) * 12-V socket, cup holder * Tire pressure monitoring system * Tires 235/60 R17C 117/115 R, rolling resistance optimized * Wheelbase standard 3,640 mm * Three-point automatic safety belts with height adjustment * Rear wing doors with enlarged opening angle * Heat-insulating glazing * 12-V sockets in the cab * Suspension seat "ergoActive", left * Suspension seat "ergoActive", right * Seat belt warning, E-contact in the seat belt buckle, driver and front passenger seat * Seat covers in fabric "Toronto Grid" * Seat heating for driver and front passenger seat, separately adjustable * 2 remote control keys Dedpfx Asx Dgm Noqvecp * Approved as 3.5t * Start/stop system with brake energy recovery * Side wind assist * Headlight cleaning system, washer fluid level indicator, heated windshield washer nozzles * Windshield wiper intermittent switch with light and rain sensor * Keyless Go with SAFELOCK * Turning assistant * Emergency assistant (Active lane keeping assistant, Emergency Assist and Traffic Jam Assist) * Preparation for alcohol interlock * Intelligent speed assistant * With multi-function camera * Partition, with cladding * Footwell lighting * Digital radio reception (DAB+) * Front axle (1,800 kg load capacity) * Comfort telephony with LTE and wireless charging * Lashing eyes for load securing * Combined glass windshield in heat-insulating glazing, heated * Permissible gross weight 3,500 kg * Water auxiliary heater, with rem

Condition: used, Heck DVAS 180 Refrigeration System, 180 kW Dcsdpfx Aqezrlzzovjp Professional, industrial refrigeration system from the premium manufacturer HECK Kältetechnik GmbH. The system is in very good condition for its age and has been reliably in operation until recently. Thanks to the modern refrigerant R513A, the system is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of construction: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for the efficient cooling of large halls or commercial spaces. Heating capacity: 290 kW – Highly efficient air heating through the intelligent use of waste heat from the cooling process. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Thanks to these combined performance characteristics, the system is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporating temperature: The system is designed for an evaporating temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g. cabin, cooling zone or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator highly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "Everything from a single source: We will be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, mileage: 86,384 km, power: 55 kW (74.78 HP), first registration: 09/2022, fuel type: diesel, overall weight: 1,860 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,157 mm, total width: 1,764 mm, total height: 1,813 mm, loading space length: 1,620 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Dcjdpfszq Tqujx Aqvop Internal number: 1074. NY32603 ----EQUIPMENT * Front air conditioning incl. manual recirculation control * Double locking for central locking * Rear window, fixed rear window wiper * Cargo area lighting, LED * Cargo area mat, rear, continuous * Seats: Seat package 13 (Courier) Passenger seat, foldable and retractable, driver's seat, manually adjustable in 2 directions, warning system for driver's unfastened seat belt * Transmission: 6-speed manual * ABS with EBD * Airbag, driver side * Exterior mirrors, manually adjustable * Third brake light * Diesel particulate filter (DPF) * Double-wing rear door without window * Rev counter * Electronic Stability Program (ESP) with Traction Control System (TCS) * Energy recovery (Smart Regenerative Charging) * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * Rubber floor mat in the cab * Glove compartment with lid * Interior lighting with delay function * Headrests (2) in front * Paint: solid color * Cargo area lighting * Steering column, adjustable in height and reach * Front center console, open, with bottle holder and ticket holder * Emergency brake light - hazard warning light activation during heavy braking * Package: -25° starter package * Package: Function package 12 - without sliding door - partition, full, plastic * Pollen filter * Upholstery: fabric * Radio: Audio system 15 - with digital radio reception DAB/DAB+ MyConnection radio, radio (FM/AM), MP3-capable, USB connection - Bluetooth interface - 2 speakers - MyFord Dock * Power steering, electro-mechanical EPAS (Electric Power Assisted Steering) * Package: Wheel 1 - 4x steel wheels with wheel hub cover in black * Start-stop system incl. battery, 60 AH 590 CCA * Socket: 12-volt connection * Daytime running lights * Lashing eyes 6 - DIN 75410 * Immobilizer * Heat-reflective glazing, lightly tinted * Central locking ... and more ----The vehicle has not been prepared! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We would be happy to advise you!

Condition: used, mileage: 912,569 km, power: 335 kW (455.47 HP), first registration: 04/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Equipment: * Cab: L StreamSpace * Cab variant: StreamSpace * Electric tilting roof * Storage compartment above the windshield, lockable * Ambient lighting LED * Seats in the cab: Driver's seat, sprung seat, comfort * Cab: Electro-hydraulic tilting mechanism * Upholstery: Fabric * Driver's seat, sprung seat, comfort * Passenger seat with multiple functions * Driver's seat backrest, foldable * Auxiliary heater (water) * Electric stationary air conditioning * Cooler box/refrigerator ----* Audio system: CD radio (Bluetooth) * Bluetooth hands-free system * Info display 12.7 cm with additional display * Voltage converter 24V / 12V 10 A * Automatic climate control * CB radio * MB Fleetboard * Multifunction steering wheel (leather) * Comfort locking system with multifunction key * Communication interface ----Lights & Visibility* LED daytime running lights * Auxiliary headlights * Light alloy rims "Speedline" * Exterior mirror on the right with maneuvering position * Exterior sun visor * Air horns * Electric sunshade, 2-piece * Sunshade for side windows * Work lights * Exterior mirrors, electrically adjustable and heated ----* Engine 10.7 L - 335 kW R6 Diesel (OM 470) * Distance hold assist * Emergency braking assist Dsdozpg D Sjpfx Aqvjcp * Lane keeping assist * Hill start assist * Differential lock, rear axle * Suspension: leaf spring / air * Transmission 12-speed - Type: G 211-12 * Retarder * Engine brake, reinforced * Disc brakes, front and rear axles ----* Tipping hydraulic system * Hydraulic PTO, rear ----* Tire dimension front axle: 385/55R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 570 l * AdBlue tank: 60 l * Technically permissible total weight: 18000 kg * Unladen weight: 7319 kg * Permissible trailer load: / * Overall length: 6157 mm * Wheelbase: / * Next technical inspection due: / ----Vehicle number: 12257----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.----We will be happy to assist you with all formalities that arise when purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle Technical inspection/periodic technical inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, Euro Classic range – Inox finish Electrical power 400 V three-phase Power supply 3N~ 50/60 Hz Maximum power 9.5 kW Average hourly consumption 4.5 kW/h Capacity 9 pizzas Ø 30 cm Tray capacity 2 x 600 x 400 mm Chamber 930 x 930 x 170 mm Maximum temperature 450 °C Independent digital regulation for dome / hearth Dome, hearth, walls, and bottom made of refractory material Heating elements inserted into the stone Counterbalanced door with lower swing Panoramic glass window Protected internal halogen lighting External dimensions 1320 x 1260 x 400 mm Net weight 200 kg Dodpfozx Dztsx Aqvjcp Stackable up to 3 chambers General description The Italforni Euro Classic EC9-I professional electric pizza oven features a 930 x 930 x 170 mm chamber that can bake up to 9 pizzas with a diameter of 30 cm simultaneously or accommodate 2 trays of 600 x 400 mm. It reaches 450 °C and benefits from independent electronic digital regulation for the dome and the hearth. What makes this model stand out Its chamber is entirely made of high-density refractory material: dome, hearth, side walls, and bottom. This design promotes insulation, thermal homogeneity, and temperature recovery, as advertised for this model. The armored “hy•pe” heating elements are inserted directly into the stone to limit energy loss. Key advantages Capacity of 9 pizzas Ø 30 cm Independent dome / hearth regulation Entirely refractory chamber Maximum temperature of 450 °C Counterbalanced door with panoramic window Protected internal halogen lighting Stackable up to 3 chambers, and a smoke extraction module is possible.