Used Solvent Recovery for sale (689)

Condition: used, Year of construction: 2002, machine/vehicle number: A0207001, -with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump Hfodpfxjx Ihvvo Afnsc - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2000, machine/vehicle number: U03 04 005/0100, In 2019, the PLC control system, the touch screen control, and the frequency converter for the gun drive were replaced. - Manufacturer: Venjakob - Type: VEN SPRAY HGS-DUO-Z Hedpfxex Ihvio Afnofc - Retrofit 2026 (base machine built in 2000) - Working width: 1300 mm - Spray booth width length 2,400 mm instead of 2,166 mm - Right-hand operating side - With dust extraction at the machine inlet - Price for reconditioned machine - Current condition, in the reconditioning phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 7,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed 3-10 m/min - With belt cleaning system - With paint recovery via V-belt system - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Total connection ~ 15kW - Length: 6,300mm - Width: 3,550mm - Height: 2,540mm - Volts, Hz 400 / 50 - Color RAL 7035 light gray/black - Location, in stock - Voltage fluctuations max. +/- 5% The image shows only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, This listing is for the Carbolite PF30 Oven The unit is in full working condition and is ready for immediate use Summary The Carbolite PF30 is a versatile, reliable 28 L benchtop oven, offering: Fast and even heating up to 300 °C Excellent stability and temperature control A durable design with flexible configuration options Safety and efficiency suitable for a range of laboratory and industrial uses Standard Features Fan‑convection design ensures faster warming, uniform temperature distribution, and quicker recovery than natural convection models. R38 digital PID controller offers precise, stable control for models PF30 through PF200. Chemically resistant stainless steel liner for durability. Lever-latch door with an airtight silicone seal, minimizing heat loss and improving efficiency. Meets safety standard BS EN 61010‑2‑010:2003 for lab equipment safety compliance. Hsdpfx Afexhfnysnefc Customizable Options (Specify When Ordering) Over‑temperature protection, ideal for protecting samples during lengthy unattended runs. Advanced digital controllers: Programmable or segment-style controllers with RS‑232/485 or Ethernet connectivity. Thermocouple ports, cable entry, lockable doors, stacking frames, door‑isolating switches, viewing windows, interior lighting, air exhaust fans, moisture extraction, etc. Stoving & curing option, designed for solvent removal—includes exhaust fan and safety vent panel (not compatible with viewing window). Low-voltage variants, floor stands (fixed or castor-mounted), routine spares kits, reinforced shelves, and more.

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. Hfedpov I Akvsfx Afnjc - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Year of construction: 2021, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 40667, Solvent recovery unit, model Di15Ax, ATEX-compliant (explosion-proof), with an actual load capacity of 15 liters per cycle. - The cycle is fully automatic; there is no need to monitor the machine, as it stops automatically at the end of each cycle. - This FORMECO unit is CE-certified. - Further technical specifications as detailed in the attached brochure. - Voltage: 220 V Includes a pack of 40 bags. Hfedeyak Nbspfx Afnjc

Condition: used, Year of construction: 2005, machine/vehicle number: A0407004, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system Hfedpfoumvu Uex Afnec - Gun control, touch screen CNC- Installed colour circles 2 pcs. - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: good (used), Ankom XT10 fat extractor + RD dryer Hjdpeucvp Aofx Afnofc ANKOM XT10 fat extractor for crude fat determination the closed system with FilterBag technology shortens extraction times Sample weight: 1-2g directly into FilterBags Working range: 0-100% fat, extraction times: 15-60 min, extraction of up to 15 samples simultaneously Semi-automatic system, unattended process > 90% solvent recovery, manual addition of solvent Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 2,889 mm, space requirement length: 11,292 mm, space requirement height: 2,675 mm, overall weight: 36,000 kg, temperature: 150 °C, operating pressure: 6 bar, pressure: 6 bar, power: 110 kW (149.56 HP), type of input current: AC, operating temperature: 150 °C, Equipment: documentation/manual, Equipment Type: Dry Product Capacity: Circa 500kg/hr Design Conditions: 150oC; 6barg/ Full Vacuum Materials of Construction (Product Wetted): 304L SS, Viton O-Ring, PTFE Reinforced Flat Gaskets Electric Motor: 3 Pole / 480V / 60Hz, 110kW, 1780 rpm, Eex de IIB T4, IP 65; Horizontal, Single-Shaft, Continuous, Vacuum Kneader- Dryer Single step direct (contact) evaporation/drying process 3 heating zones on shell, 2 heating zones on agitator Twin screw feeder General Applications: Drying of products exhibiting multiple phase change e.g. Liquid –> highly viscous –> pasty–> free flowing powder or granular solid Ability to handle foaming, stickiness, crusting & required variation of temperature and drive input requirements Self-cleaning design and heavy duty/high torque to promote heat and mass transfer Hedpfx Aot Uqldsfnjfc Potential Applications: Drying of a crystalline mass, e.g. Anti-Oxidants: Typical solvents: Methanol, Cyclohexane, Isopropanol Industrial Residues: Recovery of hazardous / valuable materials from wastes. E.g. TDI (Polyurethane monomer) from distillation residue Drying of paint and lacquer sludge Recovery of water/toluene from rubber residues Recovery of solvents from vitamin distillation residues Polymerisation Reactions..

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Hjdpsxa Hzxsfx Afnjfc Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: SLM06EC01-R1, workpiece weight (max.): 5,000 kg, This Performa Roller configuration features an entry and exit conveyor belt system and a system of rollers which feed workpieces through the spraying zone. It is equipped with 8 spray guns subdivided into 2 product circuits and a dry filtration system. It has a working width of 300 mm and is perfect for applying water and solvent-based stains and paints. 01. Performa 28 Belt has a continuous conveyor belt system for transporting workpieces and a paint recovery system. It is equipped with 8 spray guns subdivided into 2 product circuits and dry filtration. It has a working width of 240 mm and is also available in the 400 mm version. Perfect for applying water and solvent-based stains and paints.ž 02. This configuration is the ideal solution for applying 100% acrylic products. It is equipped with a continuous conveyor belt system, steel filters and a patented paint recovery system. Equipped with 6 spray guns on a single product circuit. It has a working width of 240 mm. 03. Performa Roller: roller conveyor system; working width 300 mm Performa Belt: conveyor belt system; working width 240 mm or 400 mm Hfedpfx Afjwrra Tjnsc Performa UV Belt: for application of 100% acrylic products; conveyor belt system; working width 240 mm; patented recovery system

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.650+ VAT Ex Works Loaded of FCA: Oradea/Romania Hedpofiulfsfx Afnsfc Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), functionality: fully functional, working width: 1,300 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, The auction consists of: CEFLA FEV E Dryer: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW CEFLA Cooling Zone: AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU CEFLA TR 3000 Roller Conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW Note: The paint booth visible in the video is not included in the scope of delivery or sale. TECHNICAL DETAILS Hedpfeyg Eynjx Afnofc Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan Cooling Zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Pass-through working height: 80 mm Maximum tunnel height: 1,780 mm (excluding conveyor) Maximum air knife outlet speed: 32.5 m/s Fan power (supply/recirculation): 3 kW Fan power (exhaust): 1.5 kW Air throughput (supply/recirculation fan): 6,000 m³/h Air throughput (exhaust fan): 6,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 bar conveyor with double chain, steel guides, and chrome-plated bars CEFLA TR 3000 Roller Conveyor MACHINE DETAILS Overall length: 3,000 mm EQUIPMENT Photoelectric sensor for thin panels, thickness 4 mm

Condition: used, This listing is for the Thermo Scientific Vanquish UHPLC Sytem The unit is in full working condition and is ready for immediate use Overview: Thermo Scientific Vanquish UHPLC Systems 1. Autosampler Purpose: Introduces the sample into the mobile phase stream automatically. Picks up sample from vials, plates, or tubes Injects with high precision (often nL to µL volume range 2.Pump Module Hedpfoxhfkzex Afnjfc Purpose: Delivers the mobile phase (solvent) through the system at high pressure. Binary pump: Mixes two solvents at high pressure. Ideal for fast gradients. Quaternary pump: Mixes up to four solvents at low pressure. More flexible, but slower gradients. Controls flow rate (e.g., 0.001–5.000 mL/min) Enables gradient elution (changing solvent composition over time 3.Detector Module (x2) Purpose: Detects and measures analytes as they elute from the column. Diode Array Detector (DAD/UV-Vis) – most common; detects UV-absorbing compounds Fluorescence Detector – for fluorescent compounds Charged Aerosol Detector (CAD) – universal detection for non-UV compounds Refractive Index Detector – for sugars, polymers MS (Mass Spectrometer) – advanced, highly sensitive detection Thermo Fisher’s Vanquish platform includes several variants tailored to different analytical needs—from routine HPLC to ultra-high-throughput and low-flow LC–MS workflows: Vanquish Flex UHPLC: Offers flexible HPLC/UHPLC method development and operates up to 1000 bar. It supports binary, quaternary, and dual pumps, plus intelligent tools like solvent monitoring and optional touchscreen interface. Vanquish Horizon UHPLC: Built for maximum performance, offering ultra-high pressure (up to 1500 bar), ultra-low gradient delay volume, biocompatible flow paths, and exceptional retention time stability and detector sensitivity. Vanquish Neo UHPLC: Designed for next-gen low-flow LC‑MS workflows (nano‑ to micro‑flow), delivering high‑sensitivity, high‑robustness separations. Vanquish Analytical Purification LC: Specialized for precise fractionation—high pressure (700–1500 bar), customizable flow (up to 10 mL/min), integrated fraction collector, multimodal detection, and advanced automation. Key Features Across the Platform Modular Design: Choose components (pumps, samplers, detectors, thermostatting units) to configure a tailored system. Most models offer biocompatible flow paths and Viper fingertight fittings for low dead‑volume, tool‑free setup. Temperature Control: High-performance column compartments with active/passive heating, pre‑heating, and post‑column cooling to manage frictional heating and improve reproducibility. Detection Options: Available detectors include Diode Array (with LightPipe optics for superb sensitivity), Charged Aerosol Detector (CAD) for near‑universal detection, fluorescence, multi‑wavelength, refractive index, and mass spectrometry detection. Software Integration: Fully compatible with Chromeleon CDS (with SII for streamlined MS integration), plus Xcalibur and TraceFinder for LC‑MS workflows. MS Integration: Vanquish systems interface seamlessly with Thermo MS platforms—Triple Quadrupole and Orbitrap—for sensitive, accurate mass analysis. Operational ROI: Thermo highlights reduced unplanned repairs, improved productivity, and net-zero ambitions through renewable-powered manufacturing.

Condition: used, This listing is for a Waters fraction Collector 111 chromatography system The unit is in full working condition and is ready for immediate release. The Waters Fraction Collector III is designed for flexible fraction collection in both HPLC and LC-MS workflows. It supports high flow rates, up to ~300 mL/min. It accommodates a wide variety of collection vessels/racks. For example: standard test-tube racks (13-18 mm O.D.), eppendorf tubes, scintillation vials, microtiter plates (4 × 96/384), and preparative funnel racks (4 × 32 positions). Multiple operational modes for fraction collection: time-based, volume, drop count, signal (e.g., detector threshold), peak mode (peak end time, request time, up to 10 out of 99 peaks) and window mode (start/end times) etc. The system is controllable either locally (via keypad + LCD) or remotely via software (e.g., Empower 3, MassLynx) for integration into automated purification workflows. Low nozzle-shift time (0.1 s between tube centers) helps minimise dead time between fractions. Hsdoxtbcqepfx Afnefc Diverter valve option: allows unwanted flow (e.g., column void, non-target peaks, excess solvent) to be diverted to waste, improving collection efficiency

Condition: ready for operation (used), Year of construction: 2019, operating hours: 250 h, functionality: fully functional, workpiece weight (max.): 100 kg, working width: 500 mm, transport length: 12,000 mm, feed rate X-axis: 90 m/min, feed length X-axis: 12,000 mm, working height: 300 mm, pass-through height: 300 mm, type of input current: three-phase, total length: 2,910 mm, total width: 1,300 mm, load capacity: 100 kg, overall weight: 1,000 kg, nominal power: 2.3 kW (3.13 HP), Schiele Impregmat EVO – Professional Impregnation and Coating Machine This robust industrial Schiele Impregmat EVO is a fully automatic coating and impregnation machine, designed for high-quality and loss-free impregnation, glazing, and coloring of planed and sawn wood materials.​ Technical Features: The machine is equipped with a patented double X-overlapping spray system, ensuring even application on all sides without material loss. With 8 or optionally 10 integrated brush stations, the EVO can safely and reliably process large cross-sections and solid workpieces. This makes it ideal for laminated beams, solid wooden beams, and board material.​ Working Range: Up to 500 x 300 mm maximum workpiece dimensions (optionally up to 500 x 500 mm available). Minimum workpiece length approximately 600 mm. The feed speed is variable, about 10-60 m/min., with a working height of approximately 900 mm.​ Materials and Durability: The entire frame is made of stainless steel (SS), aluminum, and plastic for contact surfaces, providing extreme wear and corrosion resistance. All drive elements are externally mounted and protected against corrosion. The brush movements are lateral and mounted on the top, preventing medium from entering the drive mechanism.​ Applications: Suitable for water-soluble impregnation and paint media, salts, oils, tints, and thin-layer varnish with a maximum viscosity of 25 seconds DIN 4 jar. Also suitable for solvent-containing materials.​ Efficiency: Special overflow nozzles ensure ideal saturation of all hard and soft wood areas. Filtered material is returned to the circuit, resulting in material savings and cost efficiency.​ Advantages: This machine is known for its precision, consistent production quality, and reliability. Automated impregnation results in uniform finishing and minimal material waste. Suitable for professional woodworking companies, window frame manufacturers, and building material suppliers.​ Hfodpfxjxvp Sxs Afnec

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) Hedpfx Afsx Sz A Rensfc • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Hedpox Iggyofx Afnsfc Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Length:16000mm Hedpeygu Smofx Afnsfc Width:6000mm Height:6000mm

Condition: good (used), Year of construction: 2001, Air-operated airless pump on a pump trolley The T2001 piston pumps are robustly constructed air-operated airless pumps designed for conveying, transferring, and painting with multiple guns. The parts that come into contact with the material are made of stainless steel, carbide, PTFE, or PE. ATX approval for use in potentially explosive atmospheres completes the picture and makes the pumps versatile. Below you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during pumping and spraying - Versatile thanks to stainless steel, carbide, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy commissioning thanks to the self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction head (empty pump): 1.5 mWS Suction head (filled pump): 6.5 mWS Material temperature: +10 to +85 °C Maximum stroke rate (short): 50 cycles/min Maximum stroke rate (continuous): 20 cycles/min Maximum material pressure: 6 bar Transmission ratio: 60:1 Volume per cycle: 270 cc Maximum operating pressure: 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4" Material outlet: G3/8" Material inlet: G1" Weight: 45 kg Customs tariff number 8424 8970 Year of manufacture: 2001 New price: €13,600 incl. VAT. Financing through our bank is also possible. Hsdpfx Afjrt Uy Nensfc komplett-konzept.leasingo.de You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: excellent (used), ARO PD30A-BSS-STT-C Stainless Steel Double Diaphragm Pump ARO's 3" metallic diaphragm pumps achieve flow rates of up to 1041 L/min and are available in a variety of materials. These pumps are frequently used in industrial applications for transfer, filling, and circulation. Hedep U T I Hjpfx Afnofc EXP series diaphragm pumps offer the best total cost of ownership and provide an optimal solution in terms of energy efficiency and downtime. Example media* for the PD30A-BSS-STT-C: Highly flammable liquids, mineral oils, paints, solvents, acids, alkalis, cleaning agents, wastewater, and much more. Suction and discharge connections: 3" BSP Max. flow rate: 1041 L/min Max. operating pressure: 8.3 bar ATEX certified: Yes Medium side material: Stainless steel Air motor material: Aluminum Diaphragm material: PTFE / Santoprene Ball material: PTFE Ball seat material: Stainless steel Max. solid size: 9.5 mm Air connection: 3/4" NPT Weight: 103.8 kg Manufacturer's price: €20,976.13 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: used, Binder Model: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven, designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specially designed for applications involving flammable solvents and meets high safety requirements (ATEX compliant). With precise temperature and pressure control, this device is ideally suited for reproducible laboratory and industrial processes. Typical Areas of Application: - Chemical and pharmaceutical laboratories - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: down to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass window with shatter protection - ATEX-compliant design - Multiple shelf levels (number depending on configuration) - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200 °C - Temperature protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Hsdsyg D Dropfx Afnsfc Scope of delivery: (See photo) (Specifications subject to changes and errors!) Should you have any further questions, we would be happy to answer them by phone.

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, Technical Data – ALMiG V-DRIVE 75 (PLUS O) Screw Compressor incl. WRG Type / Model: ALMiG V-DRIVE 75 screw compressor (version PLUS O), incl. WRG (heat recovery) Supply voltage / Frequency: 400 V / 50 Hz Drive power: 75 kW Max. discharge pressure: 7 bar Free air delivery: 4.0 – 14.18 m³/min Dimensions (L × W × H): 2300 × 1380 × 1950 mm Weight: 2041 kg Purchase price (2020): EUR 106,646.00 (see attached invoice) Hfsdpfsykk Dgjx Afnoc Inspection date: 20/02/2026 First come, first served. Upon request, we can dismantle the compressor and load it onto the buyer’s truck provided by the buyer.

Condition: new, mileage: 500 km, power: 331 kW (450.03 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), * Multimedia radio with touchscreen * Fully digital cockpit * Bluetooth hands-free system * Multifunction steering wheel * Automatic climate control * Keyless-Go * Cruise control ----* Lane departure assist * Rear axle differential lock * Leaf/air suspension * Rockinger jaw-type coupling ----* Meiller RS 21.70 hooklift body * Remote control -----* Tire size front axle: 315/70R22.5 * Tire size rear axle: 315/70R22.5 * Fuel tank: 480 liters * AdBlue tank: 85 liters * Technical gross weight: 27,000 kg Hfedpsyklvkjfx Afnoc * Unladen weight: 11,428 kg * Permissible trailer load: 14,100 kg * Overall length: 9,050 mm ----Vehicle number: 9513----Errors and prior sale excepted-----We would be pleased to assist you with all necessary formalities arising during the purchase process. Simply let us know your requirements and suggestions, and we will take care of everything for you. Among other services, we can offer the following for an additional charge:----* Trade-in of your old vehicle * TÜV/SP (safety inspection) approval * Complete export processing * Financing brokerage * Application for export license plates * Vehicle transfer/shipping * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: new, functionality: fully functional, New device!! Special offer!!! New price: €160,000 Firing and thawing chamber for the pharmaceutical industry. Application Pharmaceutical and Bioprocessing. The Farrar Scientific Controlled Rate Chamber permits fast freeze/thaw from +40C to -80C, uniform bulk freezing and/or thawing of Phase-Change Material (PCM) or products contained in a variety of containers (bags, bottles or any size containers) such as single use system (SUS), polycarbonate vessels or polypropylene vessels. Hjdev Rnl Dspfx Afnofc Temperature Range Programmable +40 ̊C to –80 ̊C Gbs7obps Chamber Volume 659.8 L (23.3 Cu. Ft.) Interior Dimensions (W x D x H) 34” x 27.5” x 43” 863.6 x 698.5 x 1092.2mm Exterior Dimensions (W x D x H) 75” x 38” x 80” 1901.5 x 960.4 x 2028.8mm Pull Down Empty Chamber < 38 minutes from +25 ̊C to –80 ̊C Door Open Recovery at –80 ̊C < 10 minutes 100L Load +25 ̊C to –80 ̊C < 12 Hours Unit comes with the complete documentation. Also the factory report. The unit is unused and in its original packaging. Shipping worldwide in a wooden box. (#7709) No further warranty or guarantee.

Condition: like new (used), functionality: fully functional, resolution (max.): 1,440 dpi, total width: 2,620 mm, total height: 1,311 mm, year of last overhaul: 2025, For sale: EPSON SureColor S80600 – As good as new This professional large-format printer was purchased new and has barely been used. The machine recently underwent a major maintenance service worth €3,500, during which all tubing was completely renewed and replaced. As a result, the printer is in excellent technical condition – ready for years of reliable operation. The Epson SureColor S80600 delivers exceptional print quality on a wide range of materials: from standard signage to high-end displays and interior decoration. All components are designed by Epson itself for seamless operation and outstanding professional results. Hfsdpfxjx H Nq Es Afnoc Eco-solvent 160: environmentally friendly ink with a roll width of 160 cm.