Used Slot Boring Machine for sale (65,298)

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Kedpovvx Hisfx Aaloww Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Kwjdeuddimjpfx Aalew Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Ksdpfexgic Ejx Aalsww Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: good (used), Year of construction: 2010, functionality: fully functional, Worktable size: 316 x 436 mm Digital display Travel X, Y: 250 x 350 mm Diameter of electrode: Ø 0.4 mm; Ø 0.5 mm; Ø 1.0 mm; Ø 2.0 mm Z1 stroke: 300 mm Tank capacity: 25 l Kwjdpfxjyr Ntps Aaljw Machine size: 1060 x 750 x 2100 mm Machine weight: 600 kg

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm 189 € . Kwedjrfd U Ropfx Aalow max durchlass 369 mm

Condition: excellent (used), IM Very good condition. Kjdpfx Aeytc Naoaloww

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 4758.02 € 18 mm MK 2 240 mm 30 - 3000 U/min Ksdpfeynm Aaox Aalsww M12 355 mm 705 mm 1065 mm 170 kg 100 mm 155 - 415 mm 155 - 550 mm 340 x 280 mm 82 mm INCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026) - VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8) - FLOTT quick-release drill chuck 3-16 mm B18 (list price €115.43) - FLOTT tap holder B16 (list price €191.57) - Taper mandrel DIN 238 MK2/B16 (list price €26.18) - Taper mandrel DIN 238 MK2/B18 (list price €26.18) - Felix 2.0 - 100 mm (list price €428.36) YOU SAVE: 842,62 € Continuous/normal drilling performance 18/20 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Coolant device LED lighting with pivot arm Drill package 3 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1781.01 € 10 mm B 16 180 mm 250 - 3000 U/min 400 mm 248 mm 460 mm 30 kg 50 mm 105 - 245 mm 300 x 200 mm 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Kwsdpfxoynmz Ns Aalew Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: good (used), Manufacturer: INNOCENTI Type: PM 325 FT Year of construction: 2012 Specifications: Metric Metric US Standard Table length 4250 mm Table width 4250 mm Table load 130.000 V-axis feed 3000 mm B-axis rotation 360.000 ° High-speed rotation B-axis 0.16 - 34.5 Omw/min. Dimensions (estimate) length 8000 mm width 4250 mm height 2000 mm Kwodpfotwllfox Aalew weight 62500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Kjdoxdnrajpfx Aalsww Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: new, Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja boring of olive 1=yes, 0=no 1 ja Olive drilling machine type OBM-PLUS (corner and scissor bearing + handle olive drilling) Pos. 1 ----- Vertical drilling unit with drill head quick-change device Pneumatic feed via foot valve 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf Kedpfoygm Tcox Aaleww 220/400V, 50Hz, 1.1KW Pos. 2 ----- Drill head BKF 3, 21.5 mm pitch, quick-changeable Drill holder M 10, cyl. right/left complete with stop system 2200 mm long Total length with 10 folding stops adjusted to constant Grip size (olive drilling) Pos. 3 ----- 1 set of drills (for handle olives) consisting of: 2 dowel drills d = 10 left 1 artificial drill d = 25 (or according to your choice or manufacturer fittings) Pos. 4 ----- Drill head BKF 2/3 can be changed quickly 2/3 spindles for corner bearings drill on the loose frame part (Sigenia, Maco, Roto, Winkhaus, GU) complete with stop system with 2 folding stops Pos. 5 ----- Drill 2 cylinder head drills for corner bearings ----- Basic price in the above version Pos.1 - Pos.5 on request! ----- Special accessories with additional charge: -Folding stop per piece, EUR 110,00/piece -Stop system for central drilling, EUR 1,980.00 -chassis, EUR 920.00 -Roller conveyor right/left 1.5 m, 200 mm wide complete with 4 rollers each, EUR 1,940.00 -Conversion kit for PVC with steel insert Oil brake cylinder for uniform feed speed PVC support to prevent the profile from tipping over Reduction gear for low speed, EUR 1,790.00 -Drill set for PVC with steel insert, EUR 420.00 2 step drills d = 12 mm left 1 piece step drill d = 12 mm right -2 pieces of additional stops for the stop in the tilt window, EUR 180.00 -2 pieces of additional pneumatic stops for gripping the entire fighter groove, EUR 1,650.00 -2 pieces of additional pneumatic stops for gripping the dowel hole in the Fighter area complete, EUR 1,650.00 -4 additional pneumatic double stops for gripping the dowel hole in the fighter area complete, EUR 1,980.00 PS: If the dowel hole is in the middle, 1 stop on the right/left is sufficient. If the dowel hole is off center, you need 2 stops on the right/left. -Packaging 1 box Packaging 1 pallet with foil, on request ----- We will be happy to send you the price list with all options upon request. (Technical information according to manufacturer - no guarantee!)

Condition: new, Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 0 nein boring of olive 1=yes, 0=no 1 ja Olive drilling machine type OBM 1 Pos. 1 ----- Standard version (grip olive drilling only) Vertical drilling unit complete with drill head BKF 3, 21.5 mm pitch Drill holder M 10, cyl. right/left Pneumatic feed via foot valve Spring-loaded hold-down devices Stop system 2200 mm Total length with 10 folding stops set for fitting 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/380V, 50Hz, 1.1KW Pos. 2 ----- 1 set of drills consisting of: 2 dowel drills d = 10 left 1 artificial drill d = 25 (or according to your choice or manufacturer fittings) ----- Price in the above version Pos. 1 to Pos. 2 on request! ----- Special accessories with additional charge: -Folding stop per piece, EUR 110,00/piece. -Stop system for central drilling, EUR 1,980.00 -chassis, EUR 920.00 -Roller conveyor right/left 1.5 m, 200 mm wide complete with 4 rolls each, EUR 1,940.00 -Packaging 1 box Packaging 1 pallet with foil, on request ----- We will be happy to send you the complete price sheet upon request! (Technical information according to manufacturer - no guarantee!) Ksdpfxeygm S Se Aalsww

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,000 mm, travel distance W-axis: 1,200 mm, MAKE: PAMA MODEL: SPEEDRAM 4 CATEGORY: Floor Type CNC Boring Mill YEAR OF MANUFACTURE: 1999 CNC CONTROL: Siemens Sinumerik 840C Spindle Internal Boring Spindle Taper: ISO 50 Boring Spindle Diameter: Ø 180 mm Spindle Speed Range: 2 – 1,600 rpm Spindle Motor Power: 100 kW Machine equipped with through-spindle coolant Working Capacity X Axis (Column Longitudinal Travel): 13,000 mm Y Axis (Head Vertical Travel): 5,000 mm Z Axis (Ram Cross Travel): 1,000 mm W Axis (Quill Stroke): 1,200 mm V Axis (Table Cross Travel): 3,000 mm Ram Section Dimensions: 440 x 500 mm Machine equipped with Heidenhain linear scales on all axes Table & Floor Plates Rotary Table Dimensions: 4,000 x 4,000 mm Rotary Table Load Capacity: 80 tons Kwodsyari Ajpfx Aalow Rotary Table Continuous Rotation: 360,000 positions, minimum angle 0.001° Number of Floor Plates: 2 Each Floor Plate Dimensions: 7,100 x 2,400 mm Total Floor Plate Area: 7,100 x 4,800 mm Accessories Chip conveyor Coolant tank with high-pressure pump for through-spindle coolant (CTS) 1 x 90° milling head, indexing every 2.5° (C axis) Spindle oil chiller and hydraulic unit Operation manuals and electrical schematics

Condition: used, Year of construction: 1970, Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Ströbel ES-SM Schlitztiefe / Slot depth 220mm Hub 30mm Eckenausstoßtiefe / corner ejection depth 220mm Kraftbedarf / power requirements 1PS Gewicht / Weight ca. 300Kg Online-Video-Inspection by Skype-Video Kwedpeiidt Sofx Aalew We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1970, Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Krause ES-SMSchlitztiefe / Slot depth 220mm Hub 30mm Eckenausstoßtiefe / corner ejection depth 220mm Kodpfxsi Dx Nne Aaljww Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1970, Schlitzmaschine / Slot machine Krause-Y-32-UM-2-69Schlitztiefe / slot depth max. 32cm Normal Schlitzbreite / Normal slot width 3mm Hub des Druckstückes / stroke of the pressure piece ca. 30mm Stanzhübe / punch strokes per minute ca. 84 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kwedpfxeiiduao Aalsw On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Drilling slide, vertical movement Y axis: 1,000 mm Drilling slide, workpiece support movement W axis: 500 mm Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Kwsdpfx Aaoxpwf Telow Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Condition: used, Year of construction: 1954, Technical details: max. ram stroke: 220 mm workpiece diameter - max.: 400-450 mm total power requirement: 1,5 kW work table:: 650x250 mm ram adjustment: 100 Manuell mm Kwjdpfxev Ty R Dj Aalow no. of ram strokes: 45/78/125 table adjustment: 400 längs mm table adjustment: 150-170 quer mm table adjustment: ca. 360 vertikal mm tool - head swivelling: +/- 10 Grad total power requirement: 1,5 kW weight of the machine ca.: 0,9 t dimension machine xH: 1,2 x 0,9 x 1,8 m

Condition: used, Year of construction: 1992, Technical details: spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1450 mm z-axis: 930 mm w-axis: 506 mm B-axis (table): 360 ° Kwsdpfeu Idqbjx Aalsw control for program: HdH TNC 407 tool taper: SK50 number of spindle speeds: 5 - 1.600 / stufenlos table load: 4,0 t table-size: 1100 x 1400 mm table rotating: 360 ° feed steps: X/Y/W/Z-Achse: 2 - 2000 mm/min Rapid feed X axis: X/Y/W/Z-Achse 5000 mm/min. total power requirement: 40 kW dimensions electric cabinet: 2000 x 600 x 2000 mm machine dimensions LxWxH: 4,9 x 3,7 x 3,8 m weight of the machine ca.: 14 t CNC drilling-milling machine with hydraulic power unit. Working paths from the table: X-axis table transverse 1500mm W-axis table longitudinal 1000mm 9x T-slots according to DIN 650 Equipment: measuring probe electronic handwheel hydr. weight compensation Y-axis universal milling head And some accessories, ask for them! i.D. *

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 120 mm x-travel: 2750 mm y-travel: 1500 mm z-travel: 1250 mm B-axis (table): 360 W-axis (spindle longitudinal): 900 mm control for program: TNC 155 Bahnsteuerung / contouring control tool taper: SK50 table load: 6,3 t table-size: 1600 x 1400 mm table rotating: 360 ° range drill spindle revolution per minute: 3 - 1000 U/min Kjdpfx Aeu Idrfoaloww total power requirement: 100 kW dimensions electric cabinet: L: 650 x B: 2800 x H: 2100 mm machine dimensions LxWxH: siehe Liste m weight of the machine ca.: ca. 15,0 t Contouring control Facing slide feed 210mm (U-axis) hydraulic unit Boom with control panel Measuring system Heidenhain *

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm Kwodpjv A S Efefx Aalew table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display *

Condition: used, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 110 mm, X-AXIS TRAVEL 2000 MM Y-STROKE VERTICAL 1400 MM Z-AXIS TRAVEL COLUMN: 1250 MM W-AXIS SPINDLE TRAVEL 710 MM Kwsdpfx Aox Da Slealjw TABLE 1400 X 1600 MM WORKPIECE LOAD 8000 KG SPINDLE SPEED 10 - 2000 RPM ISO 50 RAPID FEED X Y Z 10000 MM/MIN CNC HEIDENHAIN TNC 426 ATC 60 PLACES

Condition: used, Year of construction: 1995, travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 1,950 rpm, feed length W-axis: 700 mm, quill diameter: 140 mm, cnc SELCA 3045 Kwsdpfswnqnuox Aalow X AXIS STROKE 10000 MM Y AXIS STROKE 2600 MM Z AXIS RAM STROKE 600 MM W AXIS QUILL STROKE 700 MM SPINDLE DIAMETER 140 SPINDLE CONNECTION ISO 50 SPINDLE MOTOR POWER 53 KW ROTATION SPEED 6 - 1950 MM ROTARY TABLE TABLE 2000 X 1600 MM CAPACITY 10 TON STROKE AXIS V 2100 MM AUTOMATIC BI-ROTATIVE HEAD UNIVERSAL TUAR 25 PICK UP HEADS INTERNAL AND EXTERNAL COOLANT 60-Place TOOL CHANGE CHIP CONVEYOR ANCHORING PLANE 2500 X 6000 MM HYDROSTATIC X-AXIS RAM WITH HYDROSTATIC GUIDE ON 4 SIDES

Condition: used, Year of construction: 2005, X AXIS TRAVEL: 10000 MM Y AXIS TRAVEL: 4000 MM Z AXIS TRAVEL (RAM): 1000 MM W AXIS TRAVEL (SPINDLE): 800 MM TOTAL Z + W AXIS TRAVEL: 1800 MM SPINDLE DIAMETER 160 MM Ksdpfxsup Dclo Aalsww SPINDLE MOTOR POWER 40 KW SPINDLE RPM: 3000 RPM SPINDLE TAPER ISO 50 DIN 69871/1A NR 02 SPEED RANGE RAM DIMENSIONS: 460 X 520 MM RAPID FEEDING 20000 MM/MIN ROTARY TRANSLATION TABLE MODEL MG 50 OF 2500 x 3500 mm , load 50 ton , 360000 position 0,001° stroke 2000 mm HEIDENHAIN iTNC 530 CNC TOOL CHANGER 40 PLACES MANUAL UNIVERSAL HEAD ANCHOR PLATE 6000 X 2000 X 300 MM EXTERNAL REFRIGERATION TOTAL INSTALLED POWER 110 KVA YEAR : 2005

Condition: used, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 150 mm, spindle speed (max.): 2,800 rpm, travel distance W-axis: 700 mm, X-AXIS TRAVEL: 6000 MM Y-AXIS TRAVEL: 3000 MM Z-AXIS TRAVEL: 1000 MM W-AXIS TRAVEL: 700 MM ISO 50 SPINDLE MOTOR POWER: 51 KW SPINDLE ROTATIONAL SPEED: 2800 RPM Kwodpfsyb Rztjx Aalsw SPINDLE QUILL DIAMETER: 150 MM SIEMENS 840 D CNC 2000 x 2500 mm rotary table, 1500 mm V-travel, 25 ton load capacity 80-station tool changer AUTOMATIC HEAD 1 AXIS MODEL KF-D4 2.5 ° Through-spindle coolant 2 x 2000 x 5000 mm clamping plates Chip conveyor