Used Sine Wave Ruler for sale (403)

Condition: used, IMV Type: i240 + Amplifier SA3M + Fan Dimensions Power Amplifier: SA3M-i40EM-CE WxHxD 580 x 1950 x 850 mm Vibration exciter: i240 WxHxD 1234 x 997 x 720 mm Technical Data of the System: Armature mass: 20 kg Armature diameter: 290 mm Armature resonance: 2300 Hz Permissible eccentric moment: 850 N·m Frequency range: 0-2600 Hz Maximum force: 24 kN (Sine and Random) 48 kN (Shock) Maximum acceleration: 1200 m/s² (Sine) 840 m/s² (Random) 2400 m/s² (Shock) Maximum displacement: 100 mm p-p. Maximum load capacity: 400 kg. Environmental conditions: Temperature 0-40 °C, Humidity 0-85 % RH. Maximum output power: 30 kVA (SA3M-i40EM-CE) + Shaker armature 290 mm Usable up to 2000 Hz Hodpfx Aszimf Ajqtsr Weight: 410 kg (SA3M-i40EM-CE) Total weight approx. 2800 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Hedpjyi A Tdjfx Aqtjr

Condition: good (used), Plastic shaft, plastic material, plastic wave, shaft material made of plastic, round bar -Manufacturer: Röchling, POM-C plastic shaft, solid material, round bar -Type: Sustarin-C natura Ø 280 mm l -Item No.: 141275 Hsdjzh Ddyspfx Aqtsr -Length: 445 mm -Dimensions: Ø 280 x 445 mm -Weight: 40 kg

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Hsdpfx Asxddvnoqtjr Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Number of horizontal spindles: 5 Pot-joint drilling head: yes Drill spacing: 32 mm Clamping device: yes / pneumatic Power consumption: 2.2 kW Stop rulers Accessories: many drill bits (see photos) Hjdpfxjzhx D Uo Aqtor Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2016, Second-hand machine Year of manufacture: 2016 Condition: very well maintained Features and technical specifications: Hedpfjzk N T Ssx Aqtjr Saw unit can be tilted up to 45° 3 speeds: 3,500/4,500/5,500 rpm Motor 7.3 kW S6 Cutting length 3,200 mm Cutting width 1,250 mm Max. cutting height 133 mm Electric height adjustment X-Motion on-screen control with 5.7-inch monitor Controlled rip fence Parallelogram safety guard, height-adjustable, Can be swivelled out of the working area, maximum saw blade diameter 400 mm Dust extraction connection 80 mm Scoring unit 1.1 kW, 8,500 rpm with 2-axis Cutting stop with 2 digital jaws Tool compartment for 5 saw blades Degree grid index with length compensation for the extension table Parallel fence with digital display and automatic length compensation when the saw blade is tilted Saw blade, stop ruler length 1200 mm, can be swivelled out of the way Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm Hedpfxszk N S Ue Aqtsr - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: like new (used), Year of construction: 2024, Wegoma double miter saw with 3-axis control Double miter saw DS140 Working length 4000 mm, hydropneumatic saw feed Pneumatic swivel 45°/90°/45° 4 clamping cylinders, pneumatic 2 carbide-tipped saw blades 500 x 80 mm Left saw head fixed, right saw head movable Digital display Positioning control EPS 220 Hodpozhx A Defx Aqtjr For double miter saws, including EPS220 control for precise length positioning. With industrial touch panel 15 inches (dust and splash-proof) Display for manual input of cutting data or via data set integration - Ethernet connection 10/100 (TCP/IP) - USB interface - Data transfer via USB or network possible. - Interface to measuring ruler incl. interface software. Incl. control cabinet, motor, and software licenses. - Short and long cut setting - Automatic cutting (can only be activated via software in conjunction with entry protection) Positioning electronics for stepless automatic swivel from 45° to 135° 4.00 92062530 Feed roller conveyor 3 meters for DS mounted on the mobile unit Machine immediately available Ex works

Condition: reconditioned (used), Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm Hsdpfx Aqovu Hghotor > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, ...

Condition: reconditioned (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools Hjdpsvu Hfqefx Aqter No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently have used...

Condition: used, Straightedge, straightening rail, steel ruler, assembly ruler, assembly straightedge, straightedge -Assembly ruler: made of profile steel -Type: DIN 874 Normal -Dimensions: 503/41/H80 mm Hodpfek Hdtqex Aqter -Weight: 9.4 kg

Condition: good (used), Magnetic plate, magnetic table, sine table, sine plate, relief grinding device, grinding machine accessories -Design: Cutting tool mold making for conically ground cutting plates or mold inserts -Angle head for surface grinding machine or measuring machine -Magnetic plate -Angle: adjustable -Wooden box Hedpob A Iqdsfx Aqtjr -Total weight with box: 35 kg

Condition: used, Digital ruler for press brakes, bending benches, guillotine shears... Glass ruler, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, linear encoder -Manufacturer: RSF Elektronik, linear encoder from press brake HACO type PPES 30135 -Type: MSA 3502 -Measuring length: approx. 270 mm -Quantity: 2x encoders available -Price per piece Hsdpjrdil Hefx Aqtjr -Dimensions: 500/150/H50 mm -Weight: 5.4 kg/pc.

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm Hedpjyw Il Asfx Aqtor -Transport width: approx. 500 mm -Wave: Dimensions see photos -Quantity: 118x transport rollers available -Price: per piece -Overall dimensions: Ø 50 x 540 mm -Weight: 1.3 kg/piece

Condition: good (used), geared motor, electric motor -Speed: 70 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 25 mm Hedpfxjc U Tyge Aqter -Wave height: 80 mm -Protection class: IP 44 -Dimensions: 445/205/H160 mm -Weight: 18.1 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SITI SAT Antriebstechnik, Type MNHL 20/2-2743-MS -Speed speeds: approx. 51 rpm i= 27.4 -Power: 0.37 kW / 1400 rpm -Protection class: IP55 -Hollow shaft: Ø 20 mm Hedpfx Ajnymgheqtjr -Wave height: 80 mm -Hole pattern: 50 x 110 mm -Dimensions: 430/195/H150 mm -Weight: 10.1 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 70 rpm -Power: 0.55 kW -Design: B3 -with brake -Shaft diameter: Ø 25 mm -Wave height: 90 mm Hjdpfx Aqocbwh Totjr -Protection class: IP 54 -Dimensions: 470/200/H160 mm -Weight: 20 kg

Condition: excellent (used), PTO adapter, PTO shaft, profile shaft -double-sided toothed -1 Toothed design: Ø 35 x 105 mm -2 Toothed design: Ø 42 x 150 mm -Total length: 405 mm Hodeb A I Unjpfx Aqtor -Number: 21x waves available -Price: per piece -Weight: 4 kg/piece

Year of construction: 1989, condition: good (used), Stop, depth stop, length stop for press brake, bending machine, guillotine shear... Hodpfx Aqegrzu Uotjr -Spare part: Stop bar comes from a Dorsten BBM press brake, type: APE80-3050 -Servo motor: Manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length (unit of measurement) approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg

Condition: good (used), Power take-off gearbox, hydraulic pump gearbox, gearbox, spur gear gearbox, reduction gearbox, reversing gearbox -PTO gearbox: Hydraulic pump gearbox with incoming profile shaft -PTO shaft input: 1-3/8" 6 teeth -Output splined shaft: 35x31 Z-18 -Wave spacing: 204 mm -Bolt circle: Ø 155 mm / M12 -Translation: i = 1:1 Hsdpfxevum Sdj Aqter -Dimensions: 350/205/H220 mm -Weight: 13.2 kg

Condition: good (used), Hydraulic pump, oil pump, gear pump -Recording wave: Price: per piece Hjdjb A Siyjpfx Aqtsr Quantity: 2 available -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Condition: good (used), Electric motor, three-phase motor -Motor is for a Ehemann grinder -Transfer in current condition as seen -The foot is broken in one place -Electric motor: with 2 shaft outputs -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - Hjdpfx Aocqvp Ieqtjr -Dimensions: 540/340/H270 mm -Weight: 50 kg

Condition: good (used), Electric motor, three-phase motor -Motor is for a Ehemann grinder -Electric motor with 2 shaft outputs -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 Hjdpfx Aqjcqvp Nstsr -Protection class: - -Number: 2x available -Price: per piece -Dimensions: 540/340/H270 mm -Weight: 50 kg

Condition: good (used), Hydraulic pump, oil pump, gear pump Hsdsb A Sizjpfx Aqtsr -Recording wave: -Dimensions: 180/160/120 mm -Weight: 4.5 kg

Condition: used, Straightening ruler, straightening rail -Angle: 32° -Dimensions: 3000/50/H8 mm Hjdpfx Aqjcn Rd Toter -Weight: 8.4 kg