Used Sine Wave Ruler for sale (403)

Condition: refurbished (used), Year of construction: 2024, operating hours: 250 h, functionality: fully functional, machine/vehicle number: 325, type of input current: three-phase, total length: 1,300 mm, year of last overhaul: 2026, working width: 900 mm, tank capacity: 60 l, total width: 400 mm, total height: 1,200 mm, overall weight: 550 kg, This is an older version of the FD440 with a tray height of 33 mm (new machines are 50 mm). The machine is fully overhauled. The new model's price is 36,900 EUR. The machine comes with a 28m3 oil rotary vacuum pump from Edwards. Hjdpfsyut Hrjx Ab Ejr Extraction capacity: 60 kg The new model can be found here.

Year of construction: 2025, operating hours: 150 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 103, This is prototype of the 570 series model, it has been completely refurbished. It has 96 trays at 60x40 cm and full temperature control on each tray. It has an extraction capacity of 25kg/hr. The machine will be delivered and mounted on location including one week of introduction by out technician. Hodeyut Hxopfx Ab Ejr

Condition: excellent (used), Direct from closed ready meals manufacturer in London. Hodpfx Abeywpb Ss Esr

Condition: excellent (used), Complete 2 basket system for cook chill process, designed for rice, pasta and noodles etc. Wxcellent condition, bought new by a small ready meals factory in Wembley. Hjdpfx Abjvuvbho Eer

Condition: good (used), Marking ruler, planing ruler, test ruler, straightening ruler, straightening beam, clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table Hsdsw H Nu Depfx Ab Eer -Inking ruler: 145 x 1515 mm -Dimensions: 145/1515/H265 mm -Weight: 99 kg

Condition: used, steel ruler -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm .: 461400 2000 Hedpfx Ajuz H T Sob Esr -Dimension 2040/30/1 mm -Weight: 0.5 kg

Condition: good (used), Shaft, axle shaft, spindle shaft, axle bolt -Shaft: axle shaft spindle shaft -Type: Shaft Ø 30/40/45 mm Hedpfxowq Ipbo Ab Eer -Dimensions: see photos -Total dimensions: Ø 65 x 135 mm -Weight: 1.2 kg

Condition: used, Spotting ruler, dressing ruler, test ruler, straightening ruler, straightening bar Hodpfx Aofbyc Dsb Ejr -Spotting ruler: 60° -Ruler length: 2015 mm -Dimensions: 2275/120/H105 mm -Weight: 90 kg

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE Hodpfxjy N Rlve Ab Ejr The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: excellent (used), Sinus magnetic clamping plate, 380x150 mm, sine table/angle table Manufacturer: Binder Magnete Hsdpszhrffofx Ab Eer Type: 0011817C1 In very good condition.

Condition: excellent (used), Length of travel: 1 m Serial number: 1117445 Year of production: 2012 Weight: 1700 kg Hsdpfxjvncmqs Ab Eor Universal without synchronization

Condition: excellent (used), Travel length: 3 m Serial number: 1117489 Hsdpfx Aevncm Djb Eer Year of production: 2012 Weight: 2800 kg For FANUC robot

Year of construction: 2017, operating hours: 800 h, condition: like new (used), functionality: fully functional, working width: 250 mm, For sale is a very compact and flexible twin-wave soldering machine, type ATF 13/25, from the German quality manufacturer ATF Automatisierungstechnik GmbH (Collenberg). Solder quantity: approx. 120 kg, filled with Felder SN100Ni+ Very compact soldering machine, can be operated in an office environment. The machine does not require a compressed air connection or explosion protection. Ideal for small-series production. Footprint without infeed and outfeed: 1600x850 mm Year of manufacture: 2017 Connection value: 400V/25A, 14 KW Weight: 190 kg (without solder) Solder quantity: approx. 120 kg, filled with Felder SN100Ni+ Process width: 250mm, maximum PCB size: 470 x 250 mm. Hodpfx Ajzku Rcsb Eer With extended infeed and outfeed (770mm each) Accessories: 4 extended soldering frames with center supports 7 solder bars of 400 g each, SN100Ni+ 1 other hand tools (hydrometer, spoon, spatula, etc.) The machine was only operated sporadically, approximately 6 times a year for half a day. Therefore, it is in like-new condition. Since the machine was only used with one soldering wave, the second solder pump is still unused and included in its original delivery condition. Self-dismantling and collection only! No shipping possible.

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Hsdpozhdldefx Ab Esr Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Hjdpszhdk Tefx Ab Eor Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: good (used), Year of construction: 2014, ABB Power Wave 33 UPS System Hedpfsyil Rpox Ab Esr 2014, capacity of UPS - 400 kVa, inclusions 100 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company), Two systems in stock

Condition: good (used), Year of construction: 2014, Kohler Power Wave 5000TP UPS System Hedpsyil Nxofx Ab Esr 2014, capacity of UPS - 25 kVa, inclusions 46 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company)

Condition: used, This listing is for a UVP Upland long wave white light Hjdpfx Abexzh N Ho Eer

Condition: ready for operation (used), Year of construction: 2022, Excellent condition – from 2022-2023 (we have a total of 10 units). Hodpfx Aezb Rf Seb Eer Inspection welcome.

Condition: used, This listing is for a Heidolph Polymax 1040 Wave Platform Shaker. The unit is in full working condition and is ready for immediate release. Elevate your laboratory's capabilities with the Heidolph Polymax 1040 Wave Platform Shaker, a versatile and reliable solution designed for a wide range of applications, including cell culture, mixing, and incubation. This medium-sized shaker is engineered to provide optimal performance while ensuring gentle and effective agitation for your samples. Key Features: Variable Tilt Angles: Choose between a 5° tilt angle for soft, gentle movements or a 10° tilt angle for more vigorous shaking, accommodating various vessel types such as culture plates, media bottles, and Erlenmeyer flasks. Adjustable Speed Control: Easily set and adjust the speed from 2 to 50 rpm using the intuitive analog control knob, making it ideal for delicate cell culture applications. Temperature Control Compatibility: Designed to work seamlessly with a modular incubator system, the Polymax 1040 supports variable temperature control up to 65 °C, allowing for precise incubation conditions. Technical Specifications: Maximum Load Capacity: 5 kg Shaking Type: Orbital rocking shaker Analog Timer: Set for unattended operation from 1 to 120 minutes, with an acoustic alarm signaling when the time is up. Benefits: Unmatched Versatility: The Polymax 1040 can handle a variety of vessels, giving you the flexibility to conduct multiple experiments without limitations. User-Friendly Operation: The straightforward analog controls and timer make it easy to set up and monitor your experiments, ensuring reliable results every time. Robust Design: With a shipping weight of 10 kg and a durable construction, this shaker is built to withstand the demands of everyday laboratory use. Hodpfexx Ah Ssx Ab Ejr Choose the Heidolph Polymax 1040 Wave Platform Shaker for a dependable, high-performance shaking solution that meets the diverse needs of your laboratory. Experience enhanced efficiency and precision in your mixing and incubation processes today!

Year of construction: 2014, condition: ready for operation (used), Working condition unit! Comes with infeed and outfeed conveyor systems and full of alloy. Machine still under operation Hodozcardopfx Ab Ejr and to be released in Q3 2026. Ask for additional details!

Condition: used, Indexing table, sine table, swivel table Swivel indexing table Table length: 1130 mm Table width: 300 mm Hodpfx Aeinldpsb Ejr Table height: 112 mm Tilting angle: 2° Tilting angle: max. 7° - Tilting angle 2° via threaded spindle - Tilting angle max. 7° manually raised to the stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg Good condition Clamping plate, ideal for manufacturing wedge strips.

Condition: good (used), Sine vise Type: for milling, cross tiltable Manufacturer: Stanko Model: 370P 22 Hedpswv Dfpefx Ab Eer Number: 3177 Size: 500 x 200 mm Base area: 500 x 200 mm Number of T-slots: 3 T-slot width: 11 / 20 mm T-slot depth: 6 / 16 mm Height: 100 mm Equipment: cross tiltable Dimensions: 500 x 200 x 100 mm Weight: 31 kg

Condition: new, functionality: fully functional, overall weight: 12 kg, total height: 113 mm, total length: 175 mm, total width: 100 mm, Sine table with magnetic clamping plate, 100 x 175 mm Manufacturer: Matchling Type: MCL-4070 Permanent magnet with mechanical on/off switch. Precise and stable construction made of hardened steel. Swivels on one axis. For clamping and machining workpieces at any desired angle. Even clamping force on the pole surface. Accurate angle adjustment using an end stop. Includes storage case. Length: 175 mm Width: 100 mm Height: 113 mm Hjdpsymzpfsfx Ab Eor Accuracy: 0.003 / 100 mm Angle: 0–60° Weight: 12.2 kg

Year of construction: 2025, condition: new, functionality: fully functional, load capacity: 75 kg, The Wave 450 parts cleaning unit is a very flexible vacuum assisted degreasing machine able to perform an high degree of parts decontamination. All the operations such degreasing cycle as spray, immersion jets, ultrasonic, as well the distillation and filtration process and parts drying treatment are sequenced in automatic way and in a total vacuum ambient. The Wave 450 machine can operate with: Modified Alcohol solvents (MA) / Hydrocarbons Class III (H-III) / Chlorinated (PER) Those solvents are specifically used when the demand calls for a strong degreasing phase, evaporate completely without leaving debris residues on the processed parts. Standard features  Continuous solvent distillation  Full solvent distillation  Sludge stripping 2nd distiller Oil/solvent separation Hsdpfewc Sdasx Ab Ejr  Full solvent filtration at each cycle  Chip drying and deodorizing before emptying by the operator  Chip drying and deodorizing before opening / cleaning by the operator  Vacuum / solvent charging - discharging system  Water/solvent separation Distillation The distillation of the solvent enalble to maintain unchanged the degreasing power of the solvent. All our systems offer the double stage distiller as standard, guaranteeing the separation between solvent and oils, further expulsion of water takes place in the water separator. PLC S7 and HMI 12" Siemens are a standard feature The machine is compliant to Industry 4.0 and so Industry 5.0. Basket dimension is: mm 480 x 300 x 200 H