Used Silicone for sale (161)

Condition: good (used), Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 4.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment: • belt feeding • automatic infeed with integrated pre stacker Dksdpfslwvuxsx Aa Het • make-ready system • silicone spraying device • external knife changing device • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Condition: reconditioned (used), Steel grinding machine Dodpfohvu Tmsx Aa Hskt Manufacturer: REMA Model: DS 07/ST Version with reversible motor 0.22/0.37 kW 1450/2900 rpm Year of manufacture: unknown Serial no.: 022857 Equipment: - Reversing switch for right/left rotation - Benchtop version with chip tray - Wet grinding system - 2 pcs. support table ATS (left) adjustable from -5° to +15° and with spring suspension - 2 pcs. angle stops - Adjustable support table ATK (right) for grinding chip guide steps - Steel holder for support table ATK 360° rotatable, pivotable, with height adjustment and knurled screw for adjusting the chip depth - Enlarged protective cover (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - Protective cover (right) for grinding wheels Ø 125 mm with mounting flange - Operating manual Used, as is, no guarantee

Condition: new, Year of construction: 2025, Spot Welding Machine Type KPP90 Djdpfx Aasuy U E Hj Hskt CE certified Operated: Pneumatic Required Air Pressure: 8 bar Power at 50% ED 90kVA, Continuous power 63,5kVA Welding Capacity: 5+5mm steel sheet Water-cooled Transformer Construction: Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Epoxy resin coated transformer. Electrode Force Adjustable: 305-610daN Mains Connection: 400V/50Hz Protection Fuse: 200A Power Level: %0-99 power adjustable by digital microcontroller Weld Time: 1-99 Cycle (20ms - 2s) adjustable by digital microcontroller Arm Length: 550mm Cooling Water Requirement : 15L/min Power Input Cable: 3m Protection Class: IP21 Space Requirement(W/L/H): 450m x 1500mm x 1750mm Weight: 795Kg Warranty: 1 years (+10 years spare parts support)

Condition: good (used), High-Speed punching press - BSTA 18 /600 Stroke power 180 KN (18 tons) Overhauled by Silicon in good working condition Adjustable speed 60 - 600 (strokes) per minute up to 10 strokes in one second Equipped with synchronized double rolls BBV120 feed for strips widths from max. 120 mm Feed pitch up to max. 60 mm adjustable, highly accurate With stroke counter with programmable auto stop and speed counter Machine complete weight approx 1.5 tons Maximum strip width 120 mm Maximum strip thickness 2.2 mm Maximum feed pitch 60 mm Indexing per minute, infinitely variable 60 - 600 strokes Automatic in feed Dkjdpfx Aj Udtyoa Hjt Operators instruction manual More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: new, Year of construction: 2025, Spot Welding Machine Type KMP10 CE certified Operated: Pneumatic Required Air Pressure: 4 bar Power at 50% ED 10kVA, Continuous power 7.1kVA Welding Capacity: 1.5+1.5mm steel sheet Transformer Construction: Primary winding: Copper wire Secondary winding: Coper flexible foil sheet Core: Silicon steel EI core Dsdpouy U Hqjfx Aa Hokt Electrode Force Adjustable: 150-300 daN Mains Connection: 220V/400V (50Hz) Protection Fuse: 220V-40A / 400V-25A Power Level: %0-99 power adjustable by digital microcontroller Weld Time: 1-99 Cycle (20ms - 2s) adjustable by digital microcontroller Arm Length: 300mm Cooling Water Requirement: Water cooling (7L/min) Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 400mm x 800mm x 550mm Weight: 95kg Warranty: 1 years (+10 years spare parts support)

Condition: new, Year of construction: 2026, functionality: fully functional, Performance Data: Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Dressing Wheel Oscillation Length: 0–50 mm (adjustable) X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW Dsdpfx Aeha Eh Hoa Hokt DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Software: Latest generation GWDress-Studio with automatic AI measurement included

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, warranty duration: 24 months, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ 12-Week Delivery ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-to-own, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ ✅The Multi-Treat spray pretreatment machine is used for the surface treatment of materials to be painted. It offers the possibility of processing up to 8 different chemicals in tanks with varying numbers, depending on the process. All tanks are made of 316 SS and are insulated. The number of tanks and the number of heated tanks are determined according to the process steps. ✅The heating in the tank is done via gas heat exchangers. The processes can be monitored, and the times and temperatures of all processes can be set via the PLC touchscreen. ✅Any errors that occur in the system can be observed on the control panel. Automatic floats are located in the tanks; the system automatically stops if there is not enough water or chemicals in the tanks, and the liquid level is automatically replenished by transferring liquid between the tanks, ensuring the system remains safe. ✅There is a drain basin under all tanks. The drain basin is made of 316 SS. The tanks are made of 2 mm stainless steel 316. The material undergoes penetration testing and is argon-welded and sealed. The grates in the tank prevent dirt from entering the pumps. The interior of the cabinet consists of sandwich panels made of stainless steel 304, and the exterior is made of powder-coated sheet metal. ✅The panel thickness is 80 mm. It consists of stainless steel panels filled with polyurethane. PPT ring pipes and nozzles offer a long service life. ✅Thanks to the steam extraction fan, steam diffusion from the system into the work area is prevented. The washing system doors are container-like and sealed with silicone seals. The movable washing platform in the cabinet moves back and forth through the cabinet to wash the materials. The hoses are supported by the mobile carrier system. There are separate pumps for each process and a drain pump for draining liquids from the tanks. The drain pump is connected to the chemical drain tank. Dodefggcwopfx Aa Hjkt ✅There are manual application guns for manual application for each process. The system has a manual mode for pretreatment. The drain time and process time can be set via the PLC control panel. The drain time applies to manual application.

Condition: new, Year of construction: 2025, Grid / Mesh Welding Machine Type KMP180 CE certified Operated: Pneumatic Pressure: 4-8 bar Power: 180KVA Welding Capacity(mesh/grid): (4+4mm mild steel) 4 wire same time Water-cooled Transformer Construction: Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Epoxy resin coated transformer Maximum Force: 305-610 daN Input Voltage: 380V/50Hz Protection Fuse: 300A Power Level: %0-99 power adjustable by digital microcontroller Weld Time: 1-99 Cycle (20ms - 2s) adjustable by digital microcontroller Dedpfxsuy U Hwj Aa Hskt Arm Length: 550mm Cooling: Water cooling (30L/min) Power Input Cable: 3m Protection Class: IP21 Dimensions (W/L/H): 4500m x3500mm x 2150mm Weight: 2850Kg

Condition: new, fuel type: electric, Year of construction: 2026, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. Dodsq Igiiepfx Aa Hskt 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: used, CNC control unit for the operator panel / machine operator terminal CNC path control FANUC Type A14B - 0048 - Year of manufacture: 1990 - Machine control panel Dksdpfelb I D Tox Aa Hot - Electronic handwheel - Flexible silicone PC keyboard Dimensions WxHxD: 600 x 260 x 350 mm Weight: approx. 40 kg From a GILDEMEISTER CNC lathe. From stock, function not tested, ideal as a source of spare parts.

Condition: used, Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys -Net weight: 10.9 kg -Number: 1x package available -Price: per package Djdpfx Aajcbkkbs Hokt -Weight complete: 11.5 kg/package