Used Silicone for sale (163)

Year of construction: 2026, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). Crsdpfxoff Agis Aa Hog POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: excellent (used), Here, we offer you an inspection system for crystalline silicon solar modules. Reliable quality assurance and process control throughout the entire solar module production. The Dr. Schenk SolarInspect series was developed to meet the specific requirements in the production of crystalline silicon solar modules. These ready-to-use vision systems provide reliable quality control for the entire ongoing production process. Furthermore, continuous monitoring of the production process allows for timely corrective measures to be taken in the event of process deviations. In the production of crystalline silicon solar modules, textured glass substrates are used instead of uncoated glass. Textured glass increases the transmission of sunlight. The optical signals in the vision system, triggered by the surface structure typically used for glass substrates in silicon solar modules, are often similar to or even stronger than those of the actual defect being inspected. Dr. Schenk has developed and manufactured SolarInspect, a system that specializes in the precise differentiation between glass structure and defects on the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk's inspection system can clearly detect glass defects and distinguish them from the glass structure. Reliable inspection of: - Uncoated incoming glass - Uncoated textured glass - Coated glass, e.g., AR (anti-reflective) coated - Layer application - Finished modules Detection of: - Sheet glass defects, e.g., bubbles, inclusions, scratches - Dimensions - Edge defects - Layer defects, homogeneity and thickness of AR-coated glass SolarInspect - Exceptional performance features: - Innovative and modular optical design - Low operating costs - Ready-to-use vision systems optimized for specific process step requirements - Customized solution for all types and sizes of solar modules - Repeatable detection and evaluation - User-friendly quality and analysis tools for production control and process analysis - Easy integration into new and existing lines - Industrially proven design Crsdpfx Aaszdtgis Heg Type: SolarInspect Condition: used Sale is ex works. Scope of delivery: (See image) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, MEMBRANES FOR MEMBRANE AND VACUUM PRESSES Made of silicone or natural rubber We offer high-quality silicone and natural rubber membranes for all common membrane and vacuum presses. Our membranes are available cut to your required dimensions or as roll material. SILICONE MEMBRANE MS2 Type: MS2 Material: Silicone Colour: Milky white Surface: Smooth/textured Maximum production width: 2,000 mm Shore hardness: 50 ± 3 Shore A Thickness: 3.0 mm Operating temperature: –50 °C to +200 °C SILICONE MEMBRANE MS2-50 Type: MS2-50 Material: Silicone Colour: Milky white Surface: Smooth Maximum production width: 1,800 mm Shore hardness: 50 ± 3 Shore A Thickness: 3.0 mm Operating temperature: –60 °C to +230 °C SILICONE MEMBRANE MS1 Type: MS1 Material: Silicone Colour: Milky blue Surface: Smooth Maximum production width: 1,800 mm Shore hardness: 45 ± 3 Shore A Thickness: 2.0 mm Operating temperature: –60 °C to +230 °C NATURAL RUBBER MEMBRANE MNK-R Type: MNK-R Material: Natural rubber Colour: Brown Surface: Smooth/textured Maximum production width: 2,000 mm Shore hardness: 45 ± 3 Shore A Available thicknesses: 2.5 / 3.0 / 4.0 mm Credpfxjd S Efaj Aa Hjg Operating temperature: –20 °C to +125 °C STANDARD SILICONE SHEETING RSS Type: RSS Material: Silicone Colour: Reddish brown or transparent, other colours available on request Surface: Smooth on both sides Standard length: Cut to size or supplied as a 10 m roll, other lengths available on request Standard width: 1,200 mm, up to 1,800 mm available on request Shore hardness: 30–80 Shore A Thickness: 0.5–10 mm SILICONE ROUND CORDS RSC We also offer silicone round cords in various diameters. Type: RSC Material: Silicone Colour: Grey or transparent Standard diameters: 4–12 mm Maximum diameter: 50 mm Shore hardness: 60 ± 5 Shore A Operating temperature: –60 °C to +230 °C We will be happy to help you select the right membrane for your press and application. The stated values are guidelines and refer to normal room temperature. We reserve the right to make changes to the design and dimensions.

Condition: good (used), TWO-AXIS SILICONE TABLE WITH TWO AXES CHARACTERISTICS: - Equipment for application of silicones, polyurethanes, 1K, 2K, etc. - Programming and automaton for 300x300mm measurements. - OMRON screen - Second hand product totally revised. - It is in semi-new condition Cjdpok Tyrdofx Aa Herg - VAT not included

Condition: good (used), Year of construction: 2010, functionality: fully functional, We are selling several dosing systems for liquid silicone of the brand Reinhardt - technik, model LSR 200 Modular, years 2004 to 2010. All units are operational and in good condition. Crjdpfex A Sxzox Aa Heg

Year of construction: 2025, condition: new, I offer high-quality silicone seals designed for use in the refrigeration, food processing, and catering industries. Our gaskets are manufactured using CNC turning or extrusion methods, ensuring perfect precision and dimensional repeatability. 🔧 Applications: - Refrigeration chambers and cabinets, freezers, refrigerated counters, and display cases - Doors and lids of refrigeration equipment - Refrigeration units and industrial cooling systems ✅ Key advantages: - Resistant to low and high temperatures (from –60°C to +200°C) - Safe for food contact (FDA certified) - Excellent flexibility and sealing performance even after repeated opening - Resistant to moisture, oils, detergents, and ozone - Custom shapes and sizes available – also based on a sample or technical drawing ⚙️ Materials and colors: - Transparent, white, grey, red, and blue silicone - Hardness from 40 to 80 ShA - Standard and food-grade versions (FDA, EU 1935/2004) 🚚 Why choose us? - Fast lead times – as quick as 1 business day - Both single units and larger series available - Professional advice and assistance in selecting the right gasket profile - Shipping available throughout Poland and Europe 📞 Call or write – we will advise, select, and manufacture for you! Don’t waste time with ill-fitting gaskets – order a solution perfectly tailored to your refrigeration equipment. 📍 Shipping or personal collection. Cjdpfx Aasxpfx Ij Hjrg 📦 VAT invoice, quality guarantee. The indicated price refers to the quotation for the production of custom seals.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, clamping force: 500 kN, Clamping Force: Max. 500 kN. Distance Between Tie Bars: 320 x 320 mm. Opening Force | Stroke: Max. 130 kN | 350 mm. Mould Height (fixed | variable): Min. 200 mm. Platen Daylight (fixed | variable): Max. 550 mm. Cjdey Aybyspfx Aa Herg Mould Mounting Platens (w x h): Max. 446 x 446 mm. Weight of Movable Mould Half: Max. 180 kg. Ejector Force | Stroke: Max. 30 kN | 125 mm.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, clamping force: 1,000 kN, GERMANY ARBURG ALLROUNDER 420 C Machine Model: ARBURG ALLROUNDER 420 C GOLDEN EDITION Tie Bar Distance: 420 × 420 mm Clamping Force: 1000 kN Injection Unit (EUROMAP): 290 Opening Force: 250 kN Cedpfoy Awqfjx Aa Hjrg Maximum Opening Stroke: 500 mm Platen Opening: 750 mm Mould Mounting Platens: 570 × 570 mm Ejector Force: 40 kN Ejector Stroke: 175 mm Material Throughput (PS): 20.5 – 24.5 kg/h Material Throughput (PA6.6): 10.5 – 12.5 kg/h Holding Pressure: 2500 / 2000 / 1530 bar Nozzle Contact Force: 60 kN Nozzle Retraction Stroke: 240 mm Machine Net Weight: 3650 kg

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION Crsdozk Nitopfx Aa Hog CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. Crsdpfxoy Hl Hps Aa Hog The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: good (used), drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet -Manufacturer: Laboratory Müszeripari Müvek, chamber dryer oven type LP-321/2 -Usable space: WTH 500x520x660 mm -Heating power: 3.3 kW -Working temperature: 30 to 270°C -Door seal: silicone Codpoulpz Eefx Aa Herg -Individual components: see photos -Installation dimensions: 2510/1600/H3760 -Transport dimensions: 990/740/H960 mm -Weight: 153 kg

Condition: used, This listing is for 1 of 3 Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: Codpfx Aaexhdx Do Herg 620R Mk II (continuous tubing, two rollers) 620RE and 620RE4 (LoadSure elements, two or four rollers) These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters Credpfxswdny To Aa Hog 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Year of construction: 2008, condition: excellent (used), Electric heating rod Crodslcd Szepfx Aa Hjg Shock- and impact-resistant heating insert system with heating conductors embedded in silicone for airtight sealing. No wear, no corrosion, reliable operation even in continuous operation and under shocks and vibrations. Temperature setting via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressure surfaces on all sides. Standard gold-anodized finish, scratch- and abrasion-resistant, easy to clean. Size: Type: EST 21 Length: 2100 mm Connection value: 1100 watts, 230 volts Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, mileage: 61,116 km, power: 81 kW (110.13 HP), first registration: 11/2023, fuel type: diesel, empty load weight: 2,030 kg, maximum load weight: 770 kg, overall weight: 2,800 kg, wheelbase: 3,000 mm, next inspection (TÜV): 08/2028, CO₂ emissions: 182 g/km, fuel consumption (urban): 8.2 l/100km, fuel consumption (extra-urban): 7.1 l/100km, fuel consumption (combined): 7.8 l/100km, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, second-hand vehicle warranty, soot filter, traction control, Speed control system including speed limiter, air conditioning, crosswind assist, Bluetooth hands-free system, rear parking assist, double passenger seat on the right with storage compartment, high partition without window, panel van, transporter, 5-speed manual transmission, airbags for driver and passenger with passenger airbag deactivation, ABS, ESP, ASR, EDS, MSR, hill start assist, E-Call+, headrests, front and rear, height-adjustable, electronic power steering (Servotronic), daytime running lights, 2 speakers (full-range), App-Connect and 2 USB ports (iPhone/iPod) with AUX-IN, audio system "Composition Colour" with touch color display, exterior mirrors electrically adjustable/heated, interior lighting in the cargo area, lumbar support for the left single seat in the first row of seats (manually adjustable), windshield wiper intermittent switch adjustable in 4 stages, for the front windshield wipers, start-stop system with brake energy recovery, central locking with remote control, electric windows, ABS & immobilizer, rubber floor covering in the passenger/cargo area with load edge protection, rear, height adjustment for the left single seat in the driver's cab, seat covers in imitation leather, design "Mesh", exterior mirror housings and door handles in black, halogen headlights, steel wheels, diesel particulate filter, truck registration, electronic immobilizer, 12-volt socket, interior lighting LED, rubber floor covering in the driver's cab, new inspection/emission test, no additional costs! EU vehicle with German registration! Model 2024... Radio "Composition COLOUR" Bluetooth, parking assist for the rear area. Refrigeration unit: completely NEW in summer 2026! Fresh food service down to 0° Celsius. Robust insulated interior with a smooth surface (HACCP)... almost without silicone joints! Loading edges in stainless steel, floor with non-slip and anti-slip coating, rear doors with reinforced ISO attachments! Integrated cooling system during driving - without a roof-mounted unit. Unit: M-TEC FRIGO DOMETIC 3500. Interior dimensions. Csdpjzmkpmefx Aa Hsrg

Condition: new, driver cabin: other, gearing type: other, Vehicle location: en route / in transit Design: self-priming water pump, self-lubricating with separate motor, dirty water pump, motor KD350 C5, air-cooled, max. flow rate 1800 liters/min (108 m³/h), pump head 17 m, protection class IP 23, self-priming, impeller made of graphite cast iron, spiral made of graphite, mechanical seal silicon carbide, centrifugal pump for supplying and draining, conveying highly contaminated media up to 20 mm particle size, standard equipment: sieve, screw connections, clamps, operating and maintenance manual, weight 90 kg Cedpfei Rqr Tox Aa Hjrg Technical data: Max. flow rate: 1800 l/min (108 m³/h) Max. suction height in m: 8 Suction diameter (mm): 100 Discharge diameter (mm): 100 Particle size (mm): 20 Self-priming: yes Weight approx. kg: 90 Dimensions L x W x H in mm: 715 x 570 x 590 Motor type: 1-cylinder, 4-stroke S.V. Motor: KOHLER KD350 C5 Autonomy (h): 4.3 Fuel: Diesel Tank capacity (liters): 4.3 Starting system: Recoil starter Price varies depending on size! Suitable for water tank, see -6112-, -6113-. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical specifications: Right-hand configuration 2 side tables are still in their original packaging H&H / HARDO TH 1020-V46 BV DA (twin unit) Max. application width: 2,040 mm (2 × 1,020 mm) Configuration: Twin-unit system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Knurling on application roller: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Squeegee: pneumatically operated, needle-bearing mounted Main bearing lubrication: external lubrication, filled using a hand-operated grease gun Tank seal: adjustable and replaceable without removing the application element Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: Potentiometer Display: digital speed display Pressure rollers: 2, silicone-coated Pressure rollers, length: 2,040 mm Pressure rollers – diameter: 159 mm Pressure rollers – Actuation: pneumatic Pressure rollers Lowering: automatic after the drive motor is switched off Height adjustment of material feed: electrically driven in manual step mode Stroke of application unit: 0 – 200 mm Conveying height: 925 mm (lower edge of material) Drive for pressure rollers: separate drive Crsdszk Nzvopfx Aa Hog Motor: including motor console, mounting and cladding Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: Potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2, made from anodised aluminium plates Adjustable feet: Adjustment range ±25 mm Material flow direction: right to left Heating control: Timer (daily and weekly programme) Temperature control: electronic with digital actual value display Melting tank volume: 2 × 25 litres Heating capacity: 2 × 8.0 kW Rated power: 18.5 kW Control voltage: 24 V Rated frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse rating: 63 A Compressed air connection: < 8 bar Application: Melting and application of non-reactive hot-melt adhesives Weight: 1,560 kg Availability: at short notice Location: Rhineland-Palatinate

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage Crodpfx Aaoxx Avps Hsg • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, GMP Roller Laminator EXCELAM-II 355 Q Working width 355 mm, hot lamination Laminator for hot lamination films from 32 - 175 microns Infrared-heated silicone rollers, ensuring scratch-free lamination Equipped with an 8-bit microprocessor LCD display and electronic reverse function, standby function Temperature adjustable from 0-160 °C in 1°C increments Temperature and speed settings are pre-programmed for each film thickness The roller pressure can be precisely adjusted for each film thickness using a scale disc Max. passage height: 5 mm Adapter for 25 mm core diameter Working speed: 0-1.6 m/min, adjustable in 9 steps Connection: 220 V / 50 Hz / 1300 Watts Dimensions: W546 x D456 x H285 mm Weight: 25 kg Crodpfx Aszwwqlsa Hog

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system Credpfjxuad Aox Aa Hjg - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Year of construction: 2015, condition: used, Membrane press Manufacturer: Columbus Type: Multimat Year of manufacture: 2015 Technical data Codpfx Aozu Ammea Hsrg - Press table: 3000 x 1400 mm MULTIMAT - Membrane press table Mobile table with a pivoting heating hood and membrane frame High-performance vacuum pump TF 40, final pressure adjustable up to a maximum of 900 mb (9 t/m²) Pneumatically pivoting film fixing frame Usable membrane frame incl. highly elastic silicone membrane (700% elongation) Aluminum heating hood, fully insulated, continuously adjustable from 0 to 140 °C Digital differential pressure control Entire system (incl. vacuum pump) maintenance-free Electrical connection (incl. heating hood): 10 kW, 400 V, 50/60 Hz Dimensions: External dimensions: 3200 mm x 1600 mm Usable area (without membrane frame): 2800 mm x 1200 mm Usable area (with membrane frame): 2750 mm x 1150 mm Table / working height: 900 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM Cedpfx Aaezxt Sns Herg The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Year of construction: 2026, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C Crjdsi E Hp Tjpfx Aa Hjg

Year of construction: 2010, condition: used, Suitable for dressing and profiling diamond and CBN grinding wheels using silicon carbide wheels (individually or in a package). Accessories: Total enclosure, Camera system, image field 20 x 16 mm Extraction system 4000/3 D 240 3kW 630 m³/h Swivel unit for package dressing Software for converting DXF files to CNC files on PC Touchscreen Crsdsy Tl Iaepfx Aa Hsg Standard software for straight, bevel or radii etc. DXF files. Single Diamond- / CBN grinding wheel diameter: 400 mm Single-disc width: 30 mm Packages: packages to Ø 150 mm and width 150 mm Swivel axis: swivel plate for swivel angle: +/- 95 degrees Delivery axis travel: 82 mm Oscillation hub : 83 mm Spindle mounting diameter: 60 mm DIA/CBN wheel flange hole: 32 mm Speed of silicon wafer: 700 - 2800 rpm SIC Grinding Spindle: 60 mm Ø Workpiece clamping X-axis travel: 185 mm Y-axis travel: 194 mm Workpiece spindle head holder diameter : 100 mm with belt spindle diameter : 100 x 200 mm Grinding wheel balance: max. 40 kg Workpiece spindle speed: 500 - 1500 rpm SIC discs up to max.: 200 x 20 mm x 32 mm Connected load: approx. 2.5 kW (400 Volts / 50 Hz) Dimensions W x D x H: 2000 x 2000 x 2600 mm weight: 1200 kg colour: red RAL 3003 / grey RAL 7035

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Crodpfxjvbcbuo Aa Hjg Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.