Used Side Channel for sale (21,805)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2105025, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Compact LMC-523C with 5 spindles, manufactured in 2021. Working width 15 - 230 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm for sequential feed). Spindles: 3 x 7.5 HP and 2 x 10 HP, spindle speed 6,000 rpm, spindle diameter 40 mm. Feed motor 5 HP with inverter, feed speed 6 - 24 m/min. Fully enclosed machine with sound insulation, chrome-plated feed table, pneumatic pressure rollers with 3 adjustment positions, and a solid cast iron frame. Connection 380 V / 50 Hz, CE version. Options: infeed table 2.5 m (instead of 2 m), pneumatic side pressure roller on the left spindle, split pressure roller at the top, additional tables for multiple sawing on the 2nd bottom spindle, anti-kickback device, and Schneider Easyset touchscreen (1 x conventional and 2 x NC). Nwedpfez Ngitex Akion

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2205027, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Smartmac LMC-423S with 4 spindles, manufactured in 2022. Equipped with an extended infeed table of 2.5 m (instead of 2 m) and a Schneider Easyset touchscreen control. Nwedpfx Akoz Ngimeien

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 5,125 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 900 mm, fork length: 1,200 mm, TECHNICAL DETAILS Mast Lifting capacity: 5,000 kg Lifting height: 4,000 mm Free lift: 900 mm Overall height: 3,340 mm Fork carriage: FEM 4 Fork length: 1,200 mm MACHINE DETAILS Mast: Standard (2S400) Drive: 4-cylinder diesel engine Fuel type: Diesel Engine manufacturer: Perkins Tires: Pneumatic tires Front tires: 8.25-15 Rear tires: 8.25-15 Front tire condition: 60% Rear tire condition: 60% Dimensions & Weight Dimensions (L x W x H): 4,450 x 2,000 x 3,340 mm Total weight: 8,150 kg Operating hours: 5,125 h EQUIPMENT Full cabin Heater Nsdpsz Sb I Rofx Akiswn

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible Nwodsz Elvpspfx Akijn

Condition: used, Year of construction: 2019, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 6-24 m/min. LEADERMAC Type LMC 623 COMPACT Four-Sided Moulder ----- Sold on behalf of a client! Working width (min. – max.): 15 – 230 mm Working height (min. – max.): 10 – 150 mm Width and height are motorized/controlled 6 spindles, spindle diameter 40 mm, 6,000 rpm Spindle configuration ----- Spindle 1: bottom Spindle 2: right Spindle 3: left Nedpfxo Adfcte Akiswn Spindle 4: top Spindle 5: top Spindle 6: bottom Technical specifications provided by the manufacturer – no guarantee!

Condition: used, Year of construction: 1996, Number of spindles 9 St. Working width 230 mm Working height 120 mm einig Unimat 23, 8 spindles + universal spindle ----- Width and height are motorized/controlled Includes Haberkorn workpiece return system Machine can still be viewed in operation for a short time! Spindle configuration ----- Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: right Spindle 5: left Spindle 6: top Nwodpj Aa A Ixjfx Akien Spindle 7: bottom Spindle 8: top Spindle 9: universal Technical specifications according to the manufacturer – no guarantee provided!

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2008, loading space length: 13,600 mm, loading space width: 2,450 mm, loading space height: 2,660 mm, total length: 13,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22.5, wheelbase: 8,910 mm, color: yellow, Equipment: ABS, = Additional Options and Accessories = - EBS - Rear doors - Spare wheel - Toolbox = Further Information = General Information Year of manufacture: 2008 Registration number: OJ-31-XX Axle Configuration Nedpfozr Hcysx Akijwn Tire size: 385/55R22.5 Axle brand: BWP Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Brakes: Drum brakes Rear axle 2: Max. axle load: 9000 kg; Brakes: Drum brakes Rear axle 3: Max. axle load: 9000 kg; Steerable Weights Unladen weight: 7,500 kg Payload: 31,500 kg GVW: 39,000 kg Maintenance APK (Technical Main Inspection): valid until 06/2027

Condition: used, total width: 3,350 mm, total height: 1,500 mm, Year of manufacture: 1980 Colour: Grey Empty weight: 3.000 kg Dimensions (LxBxH): 160 x 335 x 150 cm 1e as: Single saw 2e as: Upper 3e as: Lower 4e as: Multibladesaw - Year: 1980 - Serial number: 10517 Njdpfx Akownh Uxjiown - Number of spindles [pcs.]: 4 - Max. planing width [mm]: 620 - Feed table length [mm]: 1070 - Diameter extraction nozzle [mm]: 110 - Transport dimensions: 1600mm x 3350mm x 1500mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, operating hours: 497 h, load capacity: 2,000 kg, lifting height: 1,300 mm, fuel type: diesel, gearing type: automatic, Equipment: head guard, 17 kW engine power Protective roof Hydraulic fork adjustment Work light Rotating beacon ----Vehicle number 12575 Nwsdpfx Aj Aau I Dskijn -----Errors and prior sale excepted

Condition: excellent (used), CATALOGUE NUMBER 6674 TECHNICAL DATA - Max. planing width: 150mm - Max. planing height: 130mm 7 spindles: 1) Horizontal, lower: 150mm, 3kW 2) Vertical, right: 130mm, 3kW 3) Vertical, left: 130mm, 4kW 4) Horizontal, upper: 150mm, 4kW 5) Horizontal, lower: 150mm, 3kW 6) Vertical, right: 130mm, 4kW - Diameter of all spindles: 35mm - All spindles are adjustable up/down and right/left - 4 toothed feed rollers from above - 4 rubber feed rollers from above - 2 pressure rollers from above - Electric thickness adjustment: 0.25kW Nsdpfs Af Utlsx Akiewn - Length of infeed table: 1970mm - Central lubrication of the table - Infinitely variable feed speed adjustment - Feed motor: 1.5kW - Diameter of dust extraction nozzles: 6x120mm - Dimensions (L/W/H): 4000x1300x1600mm - Weight: approximately 3000kg – Made in Germany – With 6 heads – Used planer, very good condition Net price: 36900 PLN Net price: 8581 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, operating hours: 1,200 h, lifting height: 4,120 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Linde E14-02 electric forklift, year of manufacture: 2015, battery: 2015, hours: only 1,200!, previous owner: German Armed Forces, rated load capacity: 1,400 kg, lift height: 4,120 mm, side shifter, fork length: 1,150 mm, triplex mast with free lift, full cab with heater, includes scale, includes charger, in good condition!, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! Nodj Aftq Uspfx Akijwn Cab, rental possible. = More information = Year of manufacture: 2015 Lifting capacity: 1,400 kg Overall height: 197 cm Please contact Tobias Ebert for more information.

Condition: used, The two auxiliary mills from Wanner, type 17.31, are for sale; the price is per unit. Type: C 17.26 Throughput: 20-25 kg/h Drive power: 4 kW Number of knives: 12 rotor knives and 2 stator knives Nwedpfxe Aaxqis Akien Grinding opening: 170 mm x 260 mm Rotor diameter: 170 mm Weight: 155 kg

Condition: used, Year of construction: 1992, Used Machine Year of Manufacture: 1992 Features and Technical Specifications: - 4-sided planer with automatic positioning - 2 CNC axes - Max. planing width (finished dimension) 220 x 120 mm - Min. planing dimension 25 x 5 mm - Feed table length 2000 mm - Machine adjustment without opening the hood - Motors with direct start - Feed/thickness planer spindle with digital numerical control - Left planer spindle with digital numerical control - Feed speeds 6–12 m/min. - With pre-planing cutter - Planer spindle diameter: 40 mm - Speed: 6000 rpm - Motorized feed rollers (top and bottom; smooth or rubber-coated) for the outfeed - Feed motor: 0.6–0.9 kW - Planer motor: 4 kW - Right planer shaft: 4 kW Nwsdezyy Ekepfx Akion - Left planer shaft: 4 kW - Thicknesser shaft: 5.5 kW

Condition: used, Year of construction: 1985, working width: 180 mm working height: 120 mm working spindles: 4 spindle following: down, right, left, up motor power spindle down: 3,7 kW motor power spindle right: 3,7 kW Nwsdpfx Akozdzbnoion motor power spindle left: 3,7 kW motor power spindle up: 5,5 kW adjustment spindle down: - adjustment spindle right: - adjustment spindle left: manual adjustment spindle up: electric cutter heads: turn cutter feed speed: 2 feed pressure: feather current consumption: 38 A motor brake: automatisch suction connection: machine length: machine width: weight:

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 870 mm, fuel type: electric, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, empty load weight: 10,694 kg, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, Four-way side loader Load center: 800 Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 660/250-480 Rear tire type: Solid tires Rear tire size: 413/178-285.8 Battery voltage: 80V Battery capacity: 775Ah Nwsdpfx Asz Evtfskisn Battery year of manufacture: 2017 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-purchase and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts starting from 8 tons. We would also be happy to offer your vehicle for consignment sale at our facility. Fork positioner, Platform height: 530 mm

Condition: excellent (used), CATALOGUE NUMBER 7133 TECHNICAL DATA - max. width of workpiece: 220mm Nwodpfx Ae Af Uy Sekien - max. height of workpiece: 120mm – 5 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 and 3, 11kW 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure pads - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on Cardan shafts - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H) 3500x1550x1400mm - weight 1750kg ADVANTAGES – with 5 heads – German-made – unpainted – used planer, very good condition Net price: 39900 PLN Net price: 9280 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 1999, Double-sided multipurpose edge sanding machine with oscillation and 200mm sanding height Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side 200mm sanding width Motorized sanding belt oscillation, therefore no compressed air connection required Drive motor 400V / 3kW Front work table for sanding veneer edges with a grooved stop guide (for veneer overhang) Veneer sanding device with fine adjustment, foldable Spring-loaded table, adjustable in height and can be positioned to the side Angle stop Nedpjz I T Apofx Akijwn Rear adjustable work table for sanding solid wood Both tables are height-adjustable to utilize the sanding belt Belt dimensions 3000 x 200mm Side extension table for radius sanding on the 150mm belt roller Feed support holder 68mm Central dust extraction connection 140mm Very stable frame, 2 swivel casters, 2 steering casters, and a lever brake for locking CE marking All graphite pads and dust extraction hoses have been replaced Original paint, only touched up in a few places Excellent condition from a small restoration workshop Some sanding belts are included Dimensions approx. 1800 x 1000 x 1250mm (LxWxH). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: used, operating hours: 3,594 h, lifting height: 5,300 mm, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich ETV C16 reach truck, year of manufacture: 2012, battery: 2023, hours: 3,594!, previous owner: German Armed Forces, rated load capacity: 1,600 kg, lift height: 5,300 mm, fork length: 1,200 mm, side shifter, triplex mast with free lift, including charger, overall height: 2,320 mm, in good condition!, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! = Further Information = Year of manufacture: 2012 Nwjdpj Aftrrjfx Akisn Lifting capacity: 1,600 kg Overall height: 232 cm Please contact Tobias Ebert for further information.

Condition: used, mileage: 513,267 km, power: 228 kW (309.99 HP), first registration: 08/2006, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro3, loading space length: 4,200 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2006, Equipment: ABS, all wheel drive, crane, Stock No. 5883 MAN TGA 18.310 with front-mounted HIAB crane, type 111 BS-3 HIDUO, with remote control / Meiller steel 3-way tipper / 4x4 / AP axles 3rd and 7th synchronizer rings are worn!!! (transmission) ----* Manufacturer: MAN * Type: TGA 18.310 4x4 BL * First registration: 08/2006 * Mileage: approx. 513,267 km * Transmission: mechanically shifted, 8-speed split * Gross vehicle weight: 18,000 kg * Unladen weight according to vehicle registration document: 11,350 kg * Payload: 6,650 kg * Axles: 4x4 all-wheel drive / AP axles * Wheelbase: approx. 4.00 m * Suspension: front leaf suspension, rear air suspension * Tires: 1st axle 385/65 R 22.5, 2nd axle 315/80 R 22.5 approx. 50% tread * Cab: short cab / 2 seats * Horsepower: 310 hp / Euro 3 / L package * ABS * Color: Chassis black, cab and tipper body red * Tipper dimensions (internal): Tipper internal approx. 4.20 m long x 2.45 m wide x 0.60 m high * Front-mounted HIAB crane, type 111 BS-3 HIDUO, with remote control, year of manufacture 2006 * 3 hydraulic outriggers * Maximum reach at 9.50 m = 1,040 kg * Short reach at 3.90 m = 2,660 kg * 5th and 6th control circuits for grab * Two-shell grab * Hydraulic supports * Ground control on the left * Load hook * Meiller steel 3-way tipper * Trailer coupling, 40 mm hitch, with air, light and hydraulic connections for trailer operation * Approx. 225-liter steel diesel tank on the right * 2 x front toolboxes on the left * Work lights * Rotating beacon * Chrome roof rack with spotlights * Roof fan * Cab rear wall with window * Sun visor * Heated driver's seat * Roof hatch * Electric windows and mirrors * Mirror heating * Cool box * Radio * Cruise control * Engine brake * Differential lock * Exhaust pipe on the right, raised behind the cab German vehicle!! German documents!! Nwjdpfx As Adm Sijkisn Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the details. We assume no liability for errors, changes or intermediate sales. All information is without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, mileage: 134,899 km, power: 134 kW (182.19 HP), first registration: 12/2005, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Equipment: all wheel drive, crane, Wheelbase: 3.69 m Nwjdpfx Akszpddceijn

Condition: used, operating hours: 1,305 h, lifting height: 4,620 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Linde H14D-01 diesel forklift, year of manufacture: 2015, hours: only 1,305!, previous owner: German Armed Forces, rated load capacity: 1,400 kg, lift height: 4,620 mm, side shift, fork length: 1,200 mm, triplex mast with free lift, full cab with heater, in good condition!, ready for immediate use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Cab = Further information = Year of manufacture: 2015 Lifting capacity: 1,400 kg Overall height: 215 cm Nedps Aftquefx Akiown Please contact Tobias Ebert for further information.

Condition: excellent (used), operating hours: 404 h, lifting height: 4,000 mm, mast type: triplex, gearing type: hydrostat, battery voltage: 12 V, fork length: 1,050 mm, color: yellow, Equipment: cabin, = Additional options and accessories = - Twin tyres = Notes = Forklift truck Hyster H60XM Only 404 operating hours! Capacity: 2,720 kg Side shift Fork positioner Free lift up to 1.35 metres Lifting height: 4 metres Tyres: as good as new Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium Nwodpfxjz Hpdgs Akijn

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 8,632 h, load capacity: 4,000 kg, lifting height: 6,800 mm, free lift: 2,060 mm, fuel type: gas, mast type: triplex, construction height: 3,280 mm, fork carriage width: 3,100 mm, fork length: 1,150 mm, empty load weight: 6,100 kg, total length: 2,620 mm, drive type: Treibgas, construction width: 2,440 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 200/50x10 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Combilift model, we have around 200 heavy duty forklifts, compact forklifts, forklift trucks, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always possible for us. We also gladly purchase your used machines directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C4000. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We are also happy to offer your vehicle on consignment sale in our facility. Nsdpfx Aez Ewamskiown Fork positioner, Fork positioner opening range: 660 / 3001 mm; Full free lift, Platform height: 540 mm

Condition: used, mileage: 1,919 km, power: 355 kW (482.67 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, Equipment: air conditioning, soot filter, DAF XFc 480 FAT 6X4 Meiller Trigenius Three-Sided Tipper * Retarder (ZF Intarder) * Euro 6e * Wheel arrangement 6X4 * Differential lock * Meiller Trigenius three-sided tipper D316 * 8 pairs of recessed tie-down points on the loading platform * Foldable underrun protection * Bordmatik on the left side * 2-circuit trailer hydraulics * AHK pintle hitch, 50 mm * Refrigerator * Roof hatch * Window in the rear wall * On-board computer * Adaptive cruise control * Lane departure warning system * Emergency brake assist Nwedpfxozbf Twj Akion * Turning assist with camera * Air conditioning * Auxiliary heater * Day cab * Automated transmission, TraXon, 12 gears * LED headlights * Wheelbase 4.05 m / rear overhang 1.50 m * DAF Infotainment Luxury Plus, Luxury speakers * FM/DAB/BAB+ radio * Fuel tank 340 l * AdBlue tank 45 l * Rear axle ratio 3.61 * First gearbox auxiliary drive, type NH/4c, mounted on the right side of the gearbox output shaft. Ratio 27/30, direct pump drive * Roof hatch * Luxury driver's seat * Central locking with remote control Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note - important information: Despite careful verification of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: good (used), Year of construction: 2001, operating hours: 20,900 h, functionality: fully functional, Channel baling press Paal Konti 275 D, year of manufacture 2001, with shredder and chain belt conveyor Paal KEM-1500, year of manufacture 2005 Technical data: Manufacturer Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20,900 as of 10/2026 Pressing force 75 t Total connected load 106 kW Feed opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveyor speed: 0.29 m/s Nominal width 1500 mm Axle distance 17500 mm Length of feed belt: approx. 10000 mm Length of rising section: approx. 9000 mm Gooseneck: approx. 1000 mm Inclination angle: 28° Nodpfxo Afwy Hs Akiewn Materials: Paper, cardboard, light waste, plastic waste Note: The press is currently still in operation. Dismantling is planned for December 2026. An inspection under operating conditions is possible. The complete documentation including the CE declaration is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale is reserved and the offer can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without any guarantee or warranty.