Used Shrink Hood Machine for sale (65,493)

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Nljdpfx Aezav D Dskioh Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2013, 480mm swing over bed, Nodozqr Hnspfx Akislh 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Nlodpfx Aksz Rqk Reish Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Nodoyahv Sepfx Akislh Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, Year of construction: 1993, machine/vehicle number: 931200665, Verpackungssystem - Wrapping & Shrinking Machines BVM SM4012 K-SC4030SYear 1993 - Serial-No. 931200665 Full automatic packaging SM 4012K Einlaufbreite max. 420mm / Infeed width max. 420mm Shrink tunnel SC4030S Format (Breite x Höhe) / Size (width x high) 450mm x 330mm 5m Chain gripper feeder Delivery band GUK Feeder for single sheets Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Nodpfoh Ax Hfjx Akijlh On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor Nedpszb Ipzofx Akiolh 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: Njdjyaywhspfx Akislh 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2018, condition: good (used), Bagging line consisting of Incline Conveyor with Flights and product speed control Weigher 4 Dispensing Buckets PLC Controller for complete system In good working order Njdpfxeinbhtj Akielh

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Nljdpszlpgnefx Akish

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Nlodpjz S T Injfx Akish Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Spindle Speed 50-4000rpm, Nledpfx Ajxz Dqgokish 52mm spindle bore, Prototrak RLX control, toolpost, 3 jaw chuck, Coolant, interlocked guards

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Njdpszhaqcofx Akielh

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Nljdpozu Ni Uofx Akioh Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: new, Year of construction: 2025, Flowshrink machine for high-speed packaging of products in a special range of product sizes. Double drive longitudinal sealer system ensures firm and smooth longitudinal sealing. "Blade Position Adjusting on Power-Off" function. Servo drive system ensures precise and stable performance. Very economic alternative to side sealing systems when less flexible product sizes are used. - Specifications: packaging sizes: L(100-300)xW(30-100)xH(2-100)mm; sealing bar width: 230mm; max. speed of the machine in neutral: 100 cycles/minute; power: 220V, 3.75kW; infeed length: 3000mm; machine dimensions: L5050xW1190xH1650mm; weight: 1020kg. Nedjv Nl Iaepfx Akijlh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. Nledpfsxghngex Akijh The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Njdpfxjq R Tnze Akislh Spindle taper BT40, 16 station ATC, swarf auger.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: Njdpfxsznwu Ss Akielh - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Nljdpfx Akozy Upkeijh Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Nljdpezg D I Ajfx Akioh NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Nlodpfx Ajzv S Rwjkish Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Year of construction: 2012, condition: good (used), Shrink packaging FL5545TB L sealer and shrink tunnel Serial: 872 Nedspm D T Uepfx Akiolh 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U Nlsdpey Nd Sisfx Akijh rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Year of construction: 2022, condition: new, We are selling the gummy-making machine because we no longer use it. The machine has never been used and has been stored in our production facility for all these years. You can view it at our warehouse. Nsdjz Rzknspfx Akiolh If you are interested, please contact me.

Condition: good (used), GUK FA 36/4 FL2-36 Folding Machine Machine in very good condition. Made in Germany. Ideal for the production of pharmaceutical leaflets. Equipment: – 4 parallel folding plates – „Hang-on” style delivery – Counter with batching function – Advanced high-pile feeder with an additional suction head – Rietschle compressor – Folding plates adjustable via dials – Soundproofing for all folding plates – Tool kit, additional components, and manual. Technical specifications: Max. format: 360 × 880 mm Min. format: 60 × 140 mm Very small fold size: approx. 18 mm Operating speed: 10,000 – 30,000 sheets/hour Power supply: 400V Nlodpfxjz S Uxue Akijh

Condition: good (used), Fetzel TLM 500 V4 Laminating Machine The machine is 100% functional and in perfect condition. This is an advanced, high-performance automated system, well-suited for commercial lamination services. Nlsdsz S Uyxepfx Akijh Manufactured in Austria. Technical specifications: Max. sheet size: 520 mm x 720 mm Min. sheet size: 200 mm x 290 mm Min. paper weight: 120 gsm Max. paper weight: 400 gsm Operating temperature: 80–130°C Max. operating speed: 35 m/min Feeder stack height: 600 mm Weight: 700 kg Power supply: 380 V Installed power: 7 kW Requires an additional 6-bar air supply. Features a large-diameter, chrome-plated steel cylinder that ensures a stable temperature. Equipped with pneumatic pressure, sheet separation, and an automatic high-pile feeder. Sheet feeding accuracy: ±2.0 mm. The feeder unit can be moved aside, providing excellent access to the cylinders. Includes an expanding shaft for film rolls, mounted on a swing-out arm. Features a color touchscreen control panel for easy operation. Includes a sheet-straightening module.